summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/drivers/block/sil680.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/drivers/block/sil680.c')
-rw-r--r--qemu/roms/u-boot/drivers/block/sil680.c90
1 files changed, 90 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/block/sil680.c b/qemu/roms/u-boot/drivers/block/sil680.c
new file mode 100644
index 000000000..3ca64b980
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/block/sil680.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2007
+ * Gary Jennejohn, DENX Software Engineering, garyj@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/* sil680.c - ide support functions for the Sil0680A controller */
+
+/*
+ * The following parameters must be defined in the configuration file
+ * of the target board:
+ *
+ * #define CONFIG_IDE_SIL680
+ *
+ * #define CONFIG_PCI_PNP
+ * NOTE it may also be necessary to define this if the default of 8 is
+ * incorrect for the target board (e.g. the sequoia board requires 0).
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0
+ *
+ * #define CONFIG_CMD_IDE
+ * #undef CONFIG_IDE_8xx_DIRECT
+ * #undef CONFIG_IDE_LED
+ * #undef CONFIG_IDE_RESET
+ * #define CONFIG_IDE_PREINIT
+ * #define CONFIG_SYS_IDE_MAXBUS 2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR 0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET 0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET 0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET 0
+ * #define CONFIG_SYS_ATA_REG_OFFSET 0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET 0x0004
+ *
+ * The mapping for PCI IO-space.
+ * NOTE this is the value for the sequoia board. Modify to suit.
+ * #define CONFIG_SYS_PCI0_IO_SPACE 0xE8000000
+ */
+
+#include <common.h>
+#include <ata.h>
+#include <ide.h>
+#include <pci.h>
+
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
+
+int ide_preinit (void)
+{
+ int status;
+ pci_dev_t devbusfn;
+ int l;
+
+ status = 1;
+ for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
+ ide_bus_offset[l] = -ATA_STATUS;
+ }
+ devbusfn = pci_find_device (0x1095, 0x0680, 0);
+ if (devbusfn != -1) {
+ status = 0;
+
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
+ (u32 *) &ide_bus_offset[0]);
+ ide_bus_offset[0] &= 0xfffffff8;
+ ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
+ (u32 *) &ide_bus_offset[1]);
+ ide_bus_offset[1] &= 0xfffffff8;
+ ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
+ /* init various things - taken from the Linux driver */
+ /* set PIO mode */
+ pci_write_config_byte(devbusfn, 0x80, 0x00);
+ pci_write_config_byte(devbusfn, 0x84, 0x00);
+ /* IDE0 */
+ pci_write_config_byte(devbusfn, 0xA1, 0x02);
+ pci_write_config_word(devbusfn, 0xA2, 0x328A);
+ pci_write_config_dword(devbusfn, 0xA4, 0x62DD62DD);
+ pci_write_config_dword(devbusfn, 0xA8, 0x43924392);
+ pci_write_config_dword(devbusfn, 0xAC, 0x40094009);
+ /* IDE1 */
+ pci_write_config_byte(devbusfn, 0xB1, 0x02);
+ pci_write_config_word(devbusfn, 0xB2, 0x328A);
+ pci_write_config_dword(devbusfn, 0xB4, 0x62DD62DD);
+ pci_write_config_dword(devbusfn, 0xB8, 0x43924392);
+ pci_write_config_dword(devbusfn, 0xBC, 0x40094009);
+ }
+ return (status);
+}
+
+void ide_set_reset (int flag) {
+ return;
+}