1 files changed, 347 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/block/ftide020.c b/qemu/roms/u-boot/drivers/block/ftide020.c
new file mode 100644
index 000000000..1f6995ec2
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/block/ftide020.c
@@ -0,0 +1,347 @@
+/*
+ * Faraday FTIDE020 ATA Controller (AHB)
+ *
+ * (C) Copyright 2011 Andes Technology
+ * Greentime Hu <greentime@andestech.com>
+ * Macpaul Lin <macpaul@andestech.com>
+ * Kuo-Wei Chou <kwchou@andestech.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+/* ftide020.c - ide support functions for the FTIDE020_S controller */
+
+#include <config.h>
+#include <common.h>
+#include <ata.h>
+#include <ide.h>
+#include <asm/io.h>
+#include <api_public.h>
+
+#include "ftide020.h"
+
+/* base address */
+#define FTIDE_BASE	CONFIG_SYS_ATA_BASE_ADDR
+
+/*
+ * data address - The CMD and DATA use the same FIFO in FTIDE020_S
+ *   FTIDE_DATA = CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_DATA_OFFSET
+ *		= &ftide020->rw_fifo
+ */
+#define FTIDE_DATA	(&ftide020->rw_fifo)
+
+/* command and data I/O macros */
+/* 0x0 - DATA FIFO */
+#define WRITE_DATA(x)	outl((x), &ftide020->rw_fifo)	/* 0x00 */
+#define READ_DATA()	inl(&ftide020->rw_fifo)		/* 0x00 */
+/* 0x04 - R: Status Reg, W: CMD_FIFO */
+#define WRITE_CMD(x)	outl((x), &ftide020->cmd_fifo)	/* 0x04 */
+#define READ_STATUS()	inl(&ftide020->cmd_fifo)	/* 0x04 */
+
+void ftide_set_device(int cx8, int dev)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	WRITE_CMD(SET_DEV_CMD | IDE_SET_CX8(cx8) | dev);
+}
+
+unsigned char ide_read_register(int dev, unsigned int port)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	ftide_set_device(0, dev);
+	WRITE_CMD(READ_REG_CMD | IDE_REG_CS_READ(CONFIG_IDE_REG_CS) |
+		IDE_REG_DA_WRITE(port));
+
+	return READ_DATA() & 0xff;
+}
+
+void ide_write_register(int dev, unsigned int port, unsigned char val)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	ftide_set_device(0, dev);
+	WRITE_CMD(WRITE_REG_CMD | IDE_REG_CS_WRITE(CONFIG_IDE_REG_CS) |
+		IDE_REG_DA_WRITE(port) | val);
+}
+
+void ide_write_data(int dev, const ulong *sect_buf, int words)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	ftide_set_device(0, dev);
+	WRITE_CMD(WRITE_DATA_CMD | ((words << 2) - 1));
+
+	/* block write */
+	outsl(FTIDE_DATA, sect_buf, words);
+}
+
+void ide_read_data(int dev, ulong *sect_buf, int words)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	ftide_set_device(0, dev);
+	WRITE_CMD(READ_DATA_CMD | ((words << 2) - 1));
+
+	/* block read */
+	insl(FTIDE_DATA, sect_buf, words);
+}
+
+void ftide_dfifo_ready(ulong *time)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+
+	while (!(READ_STATUS() & STATUS_RFE)) {
+		if (*time-- == 0)
+			break;
+
+		udelay(100);
+	}
+}
+
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
+
+/* Reset_IDE_controller */
+static void reset_ide_controller(void)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+	unsigned int val;
+
+	val = inl(&ftide020->cr);
+
+	val |= CONTROL_RST;
+	outl(val, &ftide020->cr);
+
+	/* wait until reset OK, this is poor HW design */
+	mdelay(50);
+	val &= ~(CONTROL_RST);
+	outl(val, &ftide020->cr);
+
+	mdelay(50);
+	val |= CONTROL_SRST;
+	outl(val, &ftide020->cr);
+
+	/* wait until reset OK, this is poor HW design */
+	mdelay(50);
+	val &= ~(CONTROL_SRST);
+	outl(val, &ftide020->cr);
+
+	/* IORDY enable for PIO, for 2 device */
+	val |= (CONTROL_IRE0 | CONTROL_IRE1);
+	outl(val, &ftide020->cr);
+}
+
+/* IDE clock frequence */
+uint ftide_clock_freq(void)
+{
+	/*
+	 * todo: To aquire dynamic system frequency is dependend on the power
+	 * management unit which the ftide020 is connected to. In current,
+	 * there are only few PMU supports in u-boot.
+	 * So this function is wait for future enhancement.
+	 */
+	return 100;
+}
+
+/* Calculate Timing Registers */
+static unsigned int timing_cal(u16 t0, u16 t1, u16 t2, u16 t4)
+{
+	unsigned int val, ahb_ns = 8;
+	u8 TEOC, T1, T2, T4;
+
+	T1 = (u8) (t1 / ahb_ns);
+	if ((T1 * ahb_ns) == t1)
+		T1--;
+
+	T2 = (u8) (t2 / ahb_ns);
+	if ((T2 * ahb_ns) == t2)
+		T2--;
+
+	T4 = (u8) (t4 / ahb_ns);
+	if ((T4 * ahb_ns) == t4)
+		T4--;
+
+	TEOC = (u8) (t0 / ahb_ns);
+	if ((TEOC * ahb_ns) == t0)
+		TEOC--;
+
+	TEOC = ((TEOC > (T1 + T2 + T4)) ? (TEOC - (T1 + T2 + T4)) : 0);
+
+	/*
+	 * Here the fields in data timing registers in PIO mode
+	 * is accessed the same way as command timing registers.
+	 */
+	val =	DT_REG_PIO_T1(T1)	|
+		DT_REG_PIO_T2(T2)	|
+		DT_REG_PIO_T4(T4)	|
+		DT_REG_PIO_TEOC(TEOC);
+
+	return val;
+}
+
+/* Set Timing Register */
+static unsigned int set_mode_timing(u8 dev, u8 id, u8 mode)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+	u16 t0, t1, t2, t4;
+	u8 tcyc, tcvs, tmli, tenv, tack, trp;
+	unsigned int val, sysclk = 8;
+
+	if (id >= TATOL_TIMING)
+		return 0;
+
+	sysclk = ftide_clock_freq();
+	switch (id) {
+	case CMD_TIMING:
+		if (mode < REG_MODE) {
+			t0 = REG_ACCESS_TIMING[REG_T0][mode];
+			t1 = REG_ACCESS_TIMING[REG_T1][mode];
+			t2 = REG_ACCESS_TIMING[REG_T2][mode];
+			t4 = REG_ACCESS_TIMING[REG_T4][mode];
+
+			val = timing_cal(t0, t1, t2, t4);
+			outl(val, (dev ? &ftide020->ctrd1 : &ftide020->ctrd0));
+			return 1;
+		} else
+			return 0;
+	case PIO_TIMING:
+		if (mode < PIO_MODE) {
+			t0 = PIO_ACCESS_TIMING[PIO_T0][mode];
+			t1 = PIO_ACCESS_TIMING[PIO_T1][mode];
+			t2 = PIO_ACCESS_TIMING[PIO_T2][mode];
+			t4 = PIO_ACCESS_TIMING[PIO_T4][mode];
+
+			val = timing_cal(t0, t1, t2, t4);
+
+			outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
+			return 1;
+		} else
+			return 0;
+	case DMA_TIMING:
+		if (mode < UDMA_MODE) {
+			/*
+			 * 0.999 is ceiling
+			 * for tcyc, tcvs, tmli, tenv, trp, tack
+			 */
+			tcyc = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCYC][mode] \
+						* sysclk) + 9990) / 10000);
+			tcvs = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCVS][mode] \
+						* sysclk) + 9990) / 10000);
+			tmli = (u8) (((UDMA_ACCESS_TIMING[UDMA_TMLI][mode] \
+						* sysclk) + 9990) / 10000);
+			tenv = (u8) (((UDMA_ACCESS_TIMING[UDMA_TENV][mode] \
+						* sysclk) + 9990) / 10000);
+			trp  = (u8) (((UDMA_ACCESS_TIMING[UDMA_TRP][mode] \
+						* sysclk) + 9990) / 10000);
+			tack = (u8) (((UDMA_ACCESS_TIMING[UDMA_TACK][mode] \
+						 * sysclk) + 9990) / 10000);
+
+			val  =	DT_REG_UDMA_TENV((tenv > 0) ? (tenv - 1) : 0) |
+				DT_REG_UDMA_TMLI((tmli > 0) ? (tmli - 1) : 0) |
+				DT_REG_UDMA_TCYC((tcyc > 0) ? (tcyc - 1) : 0) |
+				DT_REG_UDMA_TACK((tack > 0) ? (tack - 1) : 0) |
+				DT_REG_UDMA_TCVS((tcvs > 0) ? (tcvs - 1) : 0) |
+				DT_REG_UDMA_TRP((trp > 0) ? (trp - 1) : 0);
+
+			outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
+			return 1;
+		} else
+			return 0;
+	default:
+		return 0;
+	}
+}
+
+static void ftide_read_hwrev(void)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+	unsigned int rev;
+
+	rev = inl(&ftide020->revision);
+}
+
+static int ftide_controller_probe(void)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+	unsigned int bak;
+
+	bak = inl(&ftide020->ctrd1);
+
+	/* probing by using shorter setup time */
+	outl(CONFIG_CTRD1_PROBE_T1, &ftide020->ctrd1);
+	if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T1) {
+		outl(bak, &ftide020->ctrd1);
+		return 0;
+	}
+
+	/* probing by using longer setup time */
+	outl(CONFIG_CTRD1_PROBE_T2, &ftide020->ctrd1);
+	if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T2) {
+		outl(bak, &ftide020->ctrd1);
+		return 0;
+	}
+
+	outl(bak, &ftide020->ctrd1);
+
+	return 1;
+}
+
+/* ide_preinit() was migrated from linux driver ide_probe_for_ftide() */
+int ide_preinit(void)
+{
+	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
+	int status;
+	unsigned int val;
+	int i;
+
+	status = 1;
+	for (i = 0; i < CONFIG_SYS_IDE_MAXBUS; i++)
+		ide_bus_offset[i] = -ATA_STATUS;
+
+	/* auto-detect IDE controller */
+	if (ftide_controller_probe()) {
+		printf("FTIDE020_S\n");
+	} else {
+		printf("FTIDE020_S ATA controller not found.\n");
+		return API_ENODEV;
+	}
+
+	/* check HW IP revision */
+	ftide_read_hwrev();
+
+	/* set FIFO threshold */
+	outl(((WRITE_FIFO - RX_THRESH) << 16) | RX_THRESH, &ftide020->dmatirr);
+
+	/* set Device_0 PIO_4 timing */
+	set_mode_timing(0, CMD_TIMING, REG_MODE4);
+	set_mode_timing(0, PIO_TIMING, PIO_MODE4);
+
+	/* set Device_1 PIO_4 timing */
+	set_mode_timing(1, CMD_TIMING, REG_MODE4);
+	set_mode_timing(1, PIO_TIMING, PIO_MODE4);
+
+	/* from E-bios */
+	/* little endian */
+	outl(0x0, &ftide020->cr);
+	mdelay(10);
+
+	outl(0x0fff0fff, &ftide020->ahbtr);
+	mdelay(10);
+
+	/* Enable controller Interrupt */
+	val = inl(&ftide020->cr);
+
+	/* Enable: IDE IRQ, IDE Terminate ERROR IRQ, AHB Timeout error IRQ */
+	val |= (CONTROL_IIE | CONTROL_TERIE | CONTROL_AERIE);
+	outl(val, &ftide020->cr);
+
+	status = 0;
+
+	return status;
+}
+
+void ide_set_reset(int flag)
+{
+	debug("ide_set_reset()\n");
+	reset_ide_controller();
+	return;
+}