1 files changed, 0 insertions, 48 deletions
diff --git a/qemu/roms/u-boot/doc/README.fsl_iim b/qemu/roms/u-boot/doc/README.fsl_iim
deleted file mode 100644
index e087f5e0e..000000000
--- a/qemu/roms/u-boot/doc/README.fsl_iim
+++ /dev/null
@@ -1,48 +0,0 @@
-Driver implementing the fuse API for Freescale's IC Identification Module (IIM)
-
-This IP can be found on the following SoCs:
- - MPC512x,
- - i.MX25,
- - i.MX27,
- - i.MX31,
- - i.MX35,
- - i.MX51,
- - i.MX53.
-
-The section numbers in this file refer to the i.MX25 Reference Manual.
-
-A fuse word contains 8 fuse bit slots, as explained in 30.4.2.2.1.
-
-A bank contains 256 fuse word slots, as shown by the memory map in 30.3.1.
-
-Some fuse bit or word slots may not have the corresponding fuses actually
-implemented in the fusebox.
-
-See the README files of the SoCs using this driver in order to know the
-conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
-addresses.
-
-Fuse operations:
-
-   Read
-      Read operations are implemented as read accesses to the shadow registers,
-      using "Word y of Bank x" from the register summary in 30.3.2. This is
-      explained in detail in 30.4.5.1.
-
-   Sense
-      Sense operations are implemented as explained in 30.4.5.2.
-
-   Program
-      Program operations are implemented as explained in 30.4.5.3. Following
-      this operation, the shadow registers are reloaded by the hardware (not
-      immediately, but this does not make any difference for a user reading
-      these registers).
-
-   Override
-      Override operations are implemented as write accesses to the shadow
-      registers, as explained in 30.4.5.4.
-
-Configuration:
-
-   CONFIG_FSL_IIM
-      Define this to enable the fsl_iim driver.