summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/doc/README.fsl-ddr
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/doc/README.fsl-ddr')
-rw-r--r--qemu/roms/u-boot/doc/README.fsl-ddr430
1 files changed, 430 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/doc/README.fsl-ddr b/qemu/roms/u-boot/doc/README.fsl-ddr
new file mode 100644
index 000000000..1243a1222
--- /dev/null
+++ b/qemu/roms/u-boot/doc/README.fsl-ddr
@@ -0,0 +1,430 @@
+Table of interleaving 2-4 controllers
+=====================================
+ +--------------+-----------------------------------------------------------+
+ |Configuration | Memory Controller |
+ | | 1 2 3 4 |
+ |--------------+--------------+--------------+-----------------------------+
+ | Two memory | Not Intlv'ed | Not Intlv'ed | |
+ | complexes +--------------+--------------+ |
+ | | 2-way Intlv'ed | |
+ |--------------+--------------+--------------+--------------+ |
+ | | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed | |
+ | Three memory +--------------+--------------+--------------+ |
+ | complexes | 2-way Intlv'ed | Not Intlv'ed | |
+ | +-----------------------------+--------------+ |
+ | | 3-way Intlv'ed | |
+ +--------------+--------------+--------------+--------------+--------------+
+ | | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed |
+ | Four memory +--------------+--------------+--------------+--------------+
+ | complexes | 2-way Intlv'ed | 2-way Intlv'ed |
+ | +-----------------------------+-----------------------------+
+ | | 4-way Intlv'ed |
+ +--------------+-----------------------------------------------------------+
+
+
+Table of 2-way interleaving modes supported in cpu/8xxx/ddr/
+======================================================
+ +-------------+---------------------------------------------------------+
+ | | Rank Interleaving |
+ | +--------+-----------+-----------+------------+-----------+
+ |Memory | | | | 2x2 | 4x1 |
+ |Controller | None | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
+ |Interleaving | | {CS0+CS1} | {CS2+CS3} | {CS2+CS3} | CS2+CS3} |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |None | Yes | Yes | Yes | Yes | Yes |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Cacheline | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Page | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Bank | Yes | Yes | No | No, Only(*)| Yes |
+ | |CS0 Only| | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ |Superbank | No | Yes | No | No, Only(*)| Yes |
+ | | | | | {CS0+CS1} | |
+ +-------------+--------+-----------+-----------+------------+-----------+
+ (*) Although the hardware can be configured with memory controller
+ interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
+ from each controller. {CS2+CS3} on each controller are only rank
+ interleaved on that controller.
+
+ For memory controller interleaving, identical DIMMs are suggested. Software
+ doesn't check the size or organization of interleaved DIMMs.
+
+The ways to configure the ddr interleaving mode
+==============================================
+1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
+ under "CONFIG_EXTRA_ENV_SETTINGS", like:
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=bank" \
+ ......
+
+2. Run u-boot "setenv" command to configure the memory interleaving mode.
+ Either numerical or string value is accepted.
+
+ # disable memory controller interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=null"
+
+ # cacheline interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline"
+
+ # page interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=page"
+
+ # bank interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=bank"
+
+ # superbank
+ setenv hwconfig "fsl_ddr:ctlr_intlv=superbank"
+
+ # 1KB 3-way interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=3way_1KB"
+
+ # 4KB 3-way interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=3way_4KB"
+
+ # 8KB 3-way interleaving
+ setenv hwconfig "fsl_ddr:ctlr_intlv=3way_8KB"
+
+ # disable bank (chip-select) interleaving
+ setenv hwconfig "fsl_ddr:bank_intlv=null"
+
+ # bank(chip-select) interleaving cs0+cs1
+ setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1"
+
+ # bank(chip-select) interleaving cs2+cs3
+ setenv hwconfig "fsl_ddr:bank_intlv=cs2_cs3"
+
+ # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3) (2x2)
+ setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_and_cs2_cs3"
+
+ # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
+ setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
+
+ # bank(chip-select) interleaving (auto)
+ setenv hwconfig "fsl_ddr:bank_intlv=auto"
+ This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
+ on DIMMs.
+
+Memory controller address hashing
+==================================
+If the DDR controller supports address hashing, it can be enabled by hwconfig.
+
+Syntax is:
+hwconfig=fsl_ddr:addr_hash=true
+
+Memory controller ECC on/off
+============================
+If ECC is enabled in board configuratoin file, i.e. #define CONFIG_DDR_ECC,
+ECC can be turned on/off by hwconfig.
+
+Syntax is
+hwconfig=fsl_ddr:ecc=off
+
+Memory testing options for mpc85xx
+==================================
+1. Memory test can be done once U-boot prompt comes up using mtest, or
+2. Memory test can be done with Power-On-Self-Test function, activated at
+ compile time.
+
+ In order to enable the POST memory test, CONFIG_POST needs to be
+ defined in board configuraiton header file. By default, POST memory test
+ performs a fast test. A slow test can be enabled by changing the flag at
+ compiling time. To test memory bigger than 2GB, 36BIT support is needed.
+ Memory is tested within a 2GB window. TLBs are used to map the virtual 2GB
+ window to physical address so that all physical memory can be tested.
+
+Combination of hwconfig
+=======================
+Hwconfig can be combined with multiple parameters, for example, on a supported
+platform
+
+hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
+
+Table for dynamic ODT for DDR3
+==============================
+For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may
+be needed, depending on the configuration. The numbers in the following tables are
+in Ohms.
+
+* denotes dynamic ODT
+
+Two slots system
++-----------------------+----------+---------------+-----------------------------+-----------------------------+
+| Configuration | |DRAM controller| Slot 1 | Slot 2 |
++-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
+| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
++ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
+| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 | off | off | off | off | off | 30 | 30 |
+| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | off | off | 30 | 30 | 120 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 | off | off | off | 20 | 20 | | |
+| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | off | off | 20 | 20 | 120 *| off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 *| off | | | off | off | 20 | 20 |
+|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | 20 | 20 | | | 120 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 75 | 120 *| off | | | 30 | 30 | | |
+|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 75 | 30 | 30 | | | 120 *| off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Dual Rank | Empty | Slot 1 | off | 75 | 40 | off | off | off | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 40 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|Single Rank| Empty | Slot 1 | off | 75 | 40 | off | | | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty |Single Rank| Slot 2 | off | 75 | | | | | 40 | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+
+Single slot system
++-------------+------------+---------------+-----------------------------+-----------------------------+
+| | |DRAM controller| Rank 1 | Rank 2 | Rank 3 | Rank 4 |
+|Configuration| Write/Read |-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Write | Read | Write | Read | Write | Read | Write | Read | Write | Read |
++-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R1 | off | 75 | 120 *| off | off | off | 20 | 20 | off | off |
+| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R2 | off | 75 | off | 20 | 120 | off | 20 | 20 | off | off |
+| Quad Rank |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R3 | off | 75 | 20 | 20 | off | off | 120 *| off | off | off |
+| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R4 | off | 75 | 20 | 20 | off | off | off | 20 | 120 | off |
++-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | R1 | off | 75 | 40 | off | off | off |
+| Dual Rank |------------+-------+-------+-------+------+-------+------+
+| | R2 | off | 75 | 40 | off | off | off |
++-------------+------------+-------+-------+-------+------+-------+------+
+| Single Rank | R1 | off | 75 | 40 | off |
++-------------+------------+-------+-------+-------+------+
+
+Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
+ http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
+
+
+Table for ODT for DDR2
+======================
+Two slots system
++-----------------------+----------+---------------+-----------------------------+-----------------------------+
+| Configuration | |DRAM controller| Slot 1 | Slot 2 |
++-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
+| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
++ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
+| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | off | off |
+| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | | |
+| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | off | off |
+|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | | |
+|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Dual Rank | Empty | Slot 1 | off | 75 | 150 | off | off | off | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 150 | off | off | off |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+|Single Rank| Empty | Slot 1 | off | 75 | 150 | off | | | | | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+| Empty |Single Rank| Slot 2 | off | 75 | | | | | 150 | off | | |
++-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
+
+Single slot system
++-------------+------------+---------------+-----------------------------+
+| | |DRAM controller| Rank 1 | Rank 2 |
+|Configuration| Write/Read |-------+-------+-------+------+-------+------+
+| | | Write | Read | Write | Read | Write | Read |
++-------------+------------+-------+-------+-------+------+-------+------+
+| | R1 | off | 75 | 150 | off | off | off |
+| Dual Rank |------------+-------+-------+-------+------+-------+------+
+| | R2 | off | 75 | 150 | off | off | off |
++-------------+------------+-------+-------+-------+------+-------+------+
+| Single Rank | R1 | off | 75 | 150 | off |
++-------------+------------+-------+-------+-------+------+
+
+Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
+
+
+Interactive DDR debugging
+===========================
+
+For DDR parameter tuning up and debugging, the interactive DDR debugger can
+be activated by setting the environment variable "ddr_interactive" to any
+value. (The value of ddr_interactive may have a meaning in the future, but,
+for now, the presence of the variable will cause the debugger to run.) Once
+activated, U-boot will show the prompt "FSL DDR>" before enabling the DDR
+controller. The available commands are printed by typing "help".
+
+Another way to enter the interactive DDR debugger without setting the
+environment variable is to send the 'd' character early during the boot
+process. To save booting time, no additional delay is added, so the window
+to send the key press is very short -- basically, it is the time before the
+memory controller code starts to run. For example, when rebooting from
+within u-boot, the user must press 'd' IMMEDIATELY after hitting enter to
+initiate a 'reset' command. In case of power on/reset, the user can hold
+down the 'd' key while applying power or hitting the board's reset button.
+
+The example flow of using interactive debugging is
+type command "compute" to calculate the parameters from the default
+type command "print" with arguments to show SPD, options, registers
+type command "edit" with arguments to change any if desired
+type command "copy" with arguments to copy controller/dimm settings
+type command "go" to continue calculation and enable DDR controller
+
+Additional commands to restart the debugging are:
+type command "reset" to reset the board
+type command "recompute" to reload SPD and start over
+
+Note, check "next_step" to show the flow. For example, after edit opts, the
+next_step is STEP_ASSIGN_ADDRESSES. After editing registers, the next_step is
+STEP_PROGRAM_REGS. Upon issuing command "go", the debugger will program the
+DDR controller with the current setting without further calculation and then
+exit to resume the booting of the machine.
+
+The detail syntax for each commands are
+
+print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
+ c<n> - the controller number, eg. c0, c1
+ d<n> - the DIMM number, eg. d0, d1
+ spd - print SPD data
+ dimmparms - DIMM parameters, calculated from SPD
+ commonparms - lowest common parameters for all DIMMs
+ opts - options
+ addresses - address assignment (not implemented yet)
+ regs - controller registers
+
+edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
+ c<n> - the controller number, eg. c0, c1
+ d<n> - the DIMM number, eg. d0, d1
+ spd - print SPD data
+ dimmparms - DIMM parameters, calculated from SPD
+ commonparms - lowest common parameters for all DIMMs
+ opts - options
+ addresses - address assignment (not implemented yet)
+ regs - controller registers
+ <element> - name of the modified element
+ byte number if the object is SPD
+ <value> - decimal or heximal (prefixed with 0x) numbers
+
+copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>
+ same as for "edit" command
+ DIMM numbers ignored for commonparms, opts, and regs
+
+reset
+ no arguement - reset the board
+
+recompute
+ no argument - reload SPD and start over
+
+compute
+ no argument - recompute from current next_step
+
+next_step
+ no argument - show current next_step
+
+help
+ no argument - print a list of all commands
+
+go
+ no argument - program memory controller(s) and continue with U-boot
+
+Examples of debugging flow
+
+ FSL DDR>compute
+ Detected UDIMM UG51U6400N8SU-ACF
+ FSL DDR>print
+ print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
+ FSL DDR>print dimmparms
+ DIMM parameters: Controller=0 DIMM=0
+ DIMM organization parameters:
+ module part name = UG51U6400N8SU-ACF
+ rank_density = 2147483648 bytes (2048 megabytes)
+ capacity = 4294967296 bytes (4096 megabytes)
+ burst_lengths_bitmask = 0C
+ base_addresss = 0 (00000000 00000000)
+ n_ranks = 2
+ data_width = 64
+ primary_sdram_width = 64
+ ec_sdram_width = 0
+ registered_dimm = 0
+ n_row_addr = 15
+ n_col_addr = 10
+ edc_config = 0
+ n_banks_per_sdram_device = 8
+ tCKmin_X_ps = 1500
+ tCKmin_X_minus_1_ps = 0
+ tCKmin_X_minus_2_ps = 0
+ tCKmax_ps = 0
+ caslat_X = 960
+ tAA_ps = 13125
+ caslat_X_minus_1 = 0
+ caslat_X_minus_2 = 0
+ caslat_lowest_derated = 0
+ tRCD_ps = 13125
+ tRP_ps = 13125
+ tRAS_ps = 36000
+ tWR_ps = 15000
+ tWTR_ps = 7500
+ tRFC_ps = 160000
+ tRRD_ps = 6000
+ tRC_ps = 49125
+ refresh_rate_ps = 7800000
+ tIS_ps = 0
+ tIH_ps = 0
+ tDS_ps = 0
+ tDH_ps = 0
+ tRTP_ps = 7500
+ tDQSQ_max_ps = 0
+ tQHS_ps = 0
+ FSL DDR>edit c0 opts ECC_mode 0
+ FSL DDR>edit c0 regs cs0_bnds 0x000000FF
+ FSL DDR>go
+ 2 GiB left unmapped
+ 4 GiB (DDR3, 64-bit, CL=9, ECC off)
+ DDR Chip-Select Interleaving Mode: CS0+CS1
+ Testing 0x00000000 - 0x7fffffff
+ Testing 0x80000000 - 0xffffffff
+ Remap DDR 2 GiB left unmapped
+
+ POST memory PASSED
+ Flash: 128 MiB
+ L2: 128 KB enabled
+ Corenet Platform Cache: 1024 KB enabled
+ SERDES: timeout resetting bank 3
+ SRIO1: disabled
+ SRIO2: disabled
+ MMC: FSL_ESDHC: 0
+ EEPROM: Invalid ID (ff ff ff ff)
+ PCIe1: disabled
+ PCIe2: Root Complex, x1, regs @ 0xfe201000
+ 01:00.0 - 8086:10d3 - Network controller
+ PCIe2: Bus 00 - 01
+ PCIe3: disabled
+ In: serial
+ Out: serial
+ Err: serial
+ Net: Initializing Fman
+ Fman1: Uploading microcode version 101.8.0
+ e1000: 00:1b:21:81:d2:e0
+ FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, e1000#0 [PRIME]
+ Warning: e1000#0 MAC addresses don't match:
+ Address in SROM is 00:1b:21:81:d2:e0
+ Address in environment is 00:e0:0c:00:ea:05
+
+ Hit any key to stop autoboot: 0
+ =>