summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/common/xyzModem.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/common/xyzModem.c')
-rw-r--r--qemu/roms/u-boot/common/xyzModem.c817
1 files changed, 0 insertions, 817 deletions
diff --git a/qemu/roms/u-boot/common/xyzModem.c b/qemu/roms/u-boot/common/xyzModem.c
deleted file mode 100644
index 39f7d17a7..000000000
--- a/qemu/roms/u-boot/common/xyzModem.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/*
- *==========================================================================
- *
- * xyzModem.c
- *
- * RedBoot stream handler for xyzModem protocol
- *
- *==========================================================================
- * SPDX-License-Identifier: eCos-2.0
- *==========================================================================
- *#####DESCRIPTIONBEGIN####
- *
- * Author(s): gthomas
- * Contributors: gthomas, tsmith, Yoshinori Sato
- * Date: 2000-07-14
- * Purpose:
- * Description:
- *
- * This code is part of RedBoot (tm).
- *
- *####DESCRIPTIONEND####
- *
- *==========================================================================
- */
-#include <common.h>
-#include <xyzModem.h>
-#include <stdarg.h>
-#include <crc.h>
-
-/* Assumption - run xyzModem protocol over the console port */
-
-/* Values magic to the protocol */
-#define SOH 0x01
-#define STX 0x02
-#define EOT 0x04
-#define ACK 0x06
-#define BSP 0x08
-#define NAK 0x15
-#define CAN 0x18
-#define EOF 0x1A /* ^Z for DOS officionados */
-
-#define USE_YMODEM_LENGTH
-
-/* Data & state local to the protocol */
-static struct
-{
-#ifdef REDBOOT
- hal_virtual_comm_table_t *__chan;
-#else
- int *__chan;
-#endif
- unsigned char pkt[1024], *bufp;
- unsigned char blk, cblk, crc1, crc2;
- unsigned char next_blk; /* Expected block */
- int len, mode, total_retries;
- int total_SOH, total_STX, total_CAN;
- bool crc_mode, at_eof, tx_ack;
-#ifdef USE_YMODEM_LENGTH
- unsigned long file_length, read_length;
-#endif
-} xyz;
-
-#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
-#define xyzModem_MAX_RETRIES 20
-#define xyzModem_MAX_RETRIES_WITH_CRC 10
-#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
-
-
-#ifndef REDBOOT /*SB */
-typedef int cyg_int32;
-static int
-CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c)
-{
-#define DELAY 20
- unsigned long counter = 0;
- while (!tstc () && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY))
- {
- udelay (DELAY);
- counter++;
- }
- if (tstc ())
- {
- *c = getc ();
- return 1;
- }
- return 0;
-}
-
-static void
-CYGACC_COMM_IF_PUTC (char x, char y)
-{
- putc (y);
-}
-
-/* Validate a hex character */
-__inline__ static bool
-_is_hex (char c)
-{
- return (((c >= '0') && (c <= '9')) ||
- ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
-}
-
-/* Convert a single hex nibble */
-__inline__ static int
-_from_hex (char c)
-{
- int ret = 0;
-
- if ((c >= '0') && (c <= '9'))
- {
- ret = (c - '0');
- }
- else if ((c >= 'a') && (c <= 'f'))
- {
- ret = (c - 'a' + 0x0a);
- }
- else if ((c >= 'A') && (c <= 'F'))
- {
- ret = (c - 'A' + 0x0A);
- }
- return ret;
-}
-
-/* Convert a character to lower case */
-__inline__ static char
-_tolower (char c)
-{
- if ((c >= 'A') && (c <= 'Z'))
- {
- c = (c - 'A') + 'a';
- }
- return c;
-}
-
-/* Parse (scan) a number */
-static bool
-parse_num (char *s, unsigned long *val, char **es, char *delim)
-{
- bool first = true;
- int radix = 10;
- char c;
- unsigned long result = 0;
- int digit;
-
- while (*s == ' ')
- s++;
- while (*s)
- {
- if (first && (s[0] == '0') && (_tolower (s[1]) == 'x'))
- {
- radix = 16;
- s += 2;
- }
- first = false;
- c = *s++;
- if (_is_hex (c) && ((digit = _from_hex (c)) < radix))
- {
- /* Valid digit */
-#ifdef CYGPKG_HAL_MIPS
- /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
- /* isn't any good. */
- if (16 == radix)
- result = result << 4;
- else
- result = 10 * result;
- result += digit;
-#else
- result = (result * radix) + digit;
-#endif
- }
- else
- {
- if (delim != (char *) 0)
- {
- /* See if this character is one of the delimiters */
- char *dp = delim;
- while (*dp && (c != *dp))
- dp++;
- if (*dp)
- break; /* Found a good delimiter */
- }
- return false; /* Malformatted number */
- }
- }
- *val = result;
- if (es != (char **) 0)
- {
- *es = s;
- }
- return true;
-}
-
-#endif
-
-#define USE_SPRINTF
-#ifdef DEBUG
-#ifndef USE_SPRINTF
-/*
- * Note: this debug setup only works if the target platform has two serial ports
- * available so that the other one (currently only port 1) can be used for debug
- * messages.
- */
-static int
-zm_dprintf (char *fmt, ...)
-{
- int cur_console;
- va_list args;
-
- va_start (args, fmt);
-#ifdef REDBOOT
- cur_console =
- CYGACC_CALL_IF_SET_CONSOLE_COMM
- (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- CYGACC_CALL_IF_SET_CONSOLE_COMM (1);
-#endif
- diag_vprintf (fmt, args);
-#ifdef REDBOOT
- CYGACC_CALL_IF_SET_CONSOLE_COMM (cur_console);
-#endif
-}
-
-static void
-zm_flush (void)
-{
-}
-
-#else
-/*
- * Note: this debug setup works by storing the strings in a fixed buffer
- */
-#define FINAL
-#ifdef FINAL
-static char *zm_out = (char *) 0x00380000;
-static char *zm_out_start = (char *) 0x00380000;
-#else
-static char zm_buf[8192];
-static char *zm_out = zm_buf;
-static char *zm_out_start = zm_buf;
-
-#endif
-static int
-zm_dprintf (char *fmt, ...)
-{
- int len;
- va_list args;
-
- va_start (args, fmt);
- len = diag_vsprintf (zm_out, fmt, args);
- zm_out += len;
- return len;
-}
-
-static void
-zm_flush (void)
-{
-#ifdef REDBOOT
- char *p = zm_out_start;
- while (*p)
- mon_write_char (*p++);
-#endif
- zm_out = zm_out_start;
-}
-#endif
-
-static void
-zm_dump_buf (void *buf, int len)
-{
-#ifdef REDBOOT
- diag_vdump_buf_with_offset (zm_dprintf, buf, len, 0);
-#else
-
-#endif
-}
-
-static unsigned char zm_buf[2048];
-static unsigned char *zm_bp;
-
-static void
-zm_new (void)
-{
- zm_bp = zm_buf;
-}
-
-static void
-zm_save (unsigned char c)
-{
- *zm_bp++ = c;
-}
-
-static void
-zm_dump (int line)
-{
- zm_dprintf ("Packet at line: %d\n", line);
- zm_dump_buf (zm_buf, zm_bp - zm_buf);
-}
-
-#define ZM_DEBUG(x) x
-#else
-#define ZM_DEBUG(x)
-#endif
-
-/* Wait for the line to go idle */
-static void
-xyzModem_flush (void)
-{
- int res;
- char c;
- while (true)
- {
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
- if (!res)
- return;
- }
-}
-
-static int
-xyzModem_get_hdr (void)
-{
- char c;
- int res;
- bool hdr_found = false;
- int i, can_total, hdr_chars;
- unsigned short cksum;
-
- ZM_DEBUG (zm_new ());
- /* Find the start of a header */
- can_total = 0;
- hdr_chars = 0;
-
- if (xyz.tx_ack)
- {
- CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
- xyz.tx_ack = false;
- }
- while (!hdr_found)
- {
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
- ZM_DEBUG (zm_save (c));
- if (res)
- {
- hdr_chars++;
- switch (c)
- {
- case SOH:
- xyz.total_SOH++;
- case STX:
- if (c == STX)
- xyz.total_STX++;
- hdr_found = true;
- break;
- case CAN:
- xyz.total_CAN++;
- ZM_DEBUG (zm_dump (__LINE__));
- if (++can_total == xyzModem_CAN_COUNT)
- {
- return xyzModem_cancel;
- }
- else
- {
- /* Wait for multiple CAN to avoid early quits */
- break;
- }
- case EOT:
- /* EOT only supported if no noise */
- if (hdr_chars == 1)
- {
- CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
- ZM_DEBUG (zm_dprintf ("ACK on EOT #%d\n", __LINE__));
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_eof;
- }
- default:
- /* Ignore, waiting for start of header */
- ;
- }
- }
- else
- {
- /* Data stream timed out */
- xyzModem_flush (); /* Toss any current input */
- ZM_DEBUG (zm_dump (__LINE__));
- CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
- return xyzModem_timeout;
- }
- }
-
- /* Header found, now read the data */
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.blk);
- ZM_DEBUG (zm_save (xyz.blk));
- if (!res)
- {
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_timeout;
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.cblk);
- ZM_DEBUG (zm_save (xyz.cblk));
- if (!res)
- {
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_timeout;
- }
- xyz.len = (c == SOH) ? 128 : 1024;
- xyz.bufp = xyz.pkt;
- for (i = 0; i < xyz.len; i++)
- {
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
- ZM_DEBUG (zm_save (c));
- if (res)
- {
- xyz.pkt[i] = c;
- }
- else
- {
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_timeout;
- }
- }
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc1);
- ZM_DEBUG (zm_save (xyz.crc1));
- if (!res)
- {
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_timeout;
- }
- if (xyz.crc_mode)
- {
- res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc2);
- ZM_DEBUG (zm_save (xyz.crc2));
- if (!res)
- {
- ZM_DEBUG (zm_dump (__LINE__));
- return xyzModem_timeout;
- }
- }
- ZM_DEBUG (zm_dump (__LINE__));
- /* Validate the message */
- if ((xyz.blk ^ xyz.cblk) != (unsigned char) 0xFF)
- {
- ZM_DEBUG (zm_dprintf
- ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
- (xyz.blk ^ xyz.cblk)));
- ZM_DEBUG (zm_dump_buf (xyz.pkt, xyz.len));
- xyzModem_flush ();
- return xyzModem_frame;
- }
- /* Verify checksum/CRC */
- if (xyz.crc_mode)
- {
- cksum = cyg_crc16 (xyz.pkt, xyz.len);
- if (cksum != ((xyz.crc1 << 8) | xyz.crc2))
- {
- ZM_DEBUG (zm_dprintf ("CRC error - recvd: %02x%02x, computed: %x\n",
- xyz.crc1, xyz.crc2, cksum & 0xFFFF));
- return xyzModem_cksum;
- }
- }
- else
- {
- cksum = 0;
- for (i = 0; i < xyz.len; i++)
- {
- cksum += xyz.pkt[i];
- }
- if (xyz.crc1 != (cksum & 0xFF))
- {
- ZM_DEBUG (zm_dprintf
- ("Checksum error - recvd: %x, computed: %x\n", xyz.crc1,
- cksum & 0xFF));
- return xyzModem_cksum;
- }
- }
- /* If we get here, the message passes [structural] muster */
- return 0;
-}
-
-int
-xyzModem_stream_open (connection_info_t * info, int *err)
-{
-#ifdef REDBOOT
- int console_chan;
-#endif
- int stat = 0;
- int retries = xyzModem_MAX_RETRIES;
- int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
-
-/* ZM_DEBUG(zm_out = zm_out_start); */
-#ifdef xyzModem_zmodem
- if (info->mode == xyzModem_zmodem)
- {
- *err = xyzModem_noZmodem;
- return -1;
- }
-#endif
-
-#ifdef REDBOOT
- /* Set up the I/O channel. Note: this allows for using a different port in the future */
- console_chan =
- CYGACC_CALL_IF_SET_CONSOLE_COMM
- (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- if (info->chan >= 0)
- {
- CYGACC_CALL_IF_SET_CONSOLE_COMM (info->chan);
- }
- else
- {
- CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
- }
- xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS ();
-
- CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
- CYGACC_COMM_IF_CONTROL (*xyz.__chan, __COMMCTL_SET_TIMEOUT,
- xyzModem_CHAR_TIMEOUT);
-#else
-/* TODO: CHECK ! */
- int dummy = 0;
- xyz.__chan = &dummy;
-#endif
- xyz.len = 0;
- xyz.crc_mode = true;
- xyz.at_eof = false;
- xyz.tx_ack = false;
- xyz.mode = info->mode;
- xyz.total_retries = 0;
- xyz.total_SOH = 0;
- xyz.total_STX = 0;
- xyz.total_CAN = 0;
-#ifdef USE_YMODEM_LENGTH
- xyz.read_length = 0;
- xyz.file_length = 0;
-#endif
-
- CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
-
- if (xyz.mode == xyzModem_xmodem)
- {
- /* X-modem doesn't have an information header - exit here */
- xyz.next_blk = 1;
- return 0;
- }
-
- while (retries-- > 0)
- {
- stat = xyzModem_get_hdr ();
- if (stat == 0)
- {
- /* Y-modem file information header */
- if (xyz.blk == 0)
- {
-#ifdef USE_YMODEM_LENGTH
- /* skip filename */
- while (*xyz.bufp++);
- /* get the length */
- parse_num ((char *) xyz.bufp, &xyz.file_length, NULL, " ");
-#endif
- /* The rest of the file name data block quietly discarded */
- xyz.tx_ack = true;
- }
- xyz.next_blk = 1;
- xyz.len = 0;
- return 0;
- }
- else if (stat == xyzModem_timeout)
- {
- if (--crc_retries <= 0)
- xyz.crc_mode = false;
- CYGACC_CALL_IF_DELAY_US (5 * 100000); /* Extra delay for startup */
- CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
- }
- if (stat == xyzModem_cancel)
- {
- break;
- }
- }
- *err = stat;
- ZM_DEBUG (zm_flush ());
- return -1;
-}
-
-int
-xyzModem_stream_read (char *buf, int size, int *err)
-{
- int stat, total, len;
- int retries;
-
- total = 0;
- stat = xyzModem_cancel;
- /* Try and get 'size' bytes into the buffer */
- while (!xyz.at_eof && (size > 0))
- {
- if (xyz.len == 0)
- {
- retries = xyzModem_MAX_RETRIES;
- while (retries-- > 0)
- {
- stat = xyzModem_get_hdr ();
- if (stat == 0)
- {
- if (xyz.blk == xyz.next_blk)
- {
- xyz.tx_ack = true;
- ZM_DEBUG (zm_dprintf
- ("ACK block %d (%d)\n", xyz.blk, __LINE__));
- xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
-
-#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
- if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0)
- {
-#else
- if (1)
- {
-#endif
- /* Data blocks can be padded with ^Z (EOF) characters */
- /* This code tries to detect and remove them */
- if ((xyz.bufp[xyz.len - 1] == EOF) &&
- (xyz.bufp[xyz.len - 2] == EOF) &&
- (xyz.bufp[xyz.len - 3] == EOF))
- {
- while (xyz.len
- && (xyz.bufp[xyz.len - 1] == EOF))
- {
- xyz.len--;
- }
- }
- }
-
-#ifdef USE_YMODEM_LENGTH
- /*
- * See if accumulated length exceeds that of the file.
- * If so, reduce size (i.e., cut out pad bytes)
- * Only do this for Y-modem (and Z-modem should it ever
- * be supported since it can fall back to Y-modem mode).
- */
- if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length)
- {
- xyz.read_length += xyz.len;
- if (xyz.read_length > xyz.file_length)
- {
- xyz.len -= (xyz.read_length - xyz.file_length);
- }
- }
-#endif
- break;
- }
- else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF))
- {
- /* Just re-ACK this so sender will get on with it */
- CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
- continue; /* Need new header */
- }
- else
- {
- stat = xyzModem_sequence;
- }
- }
- if (stat == xyzModem_cancel)
- {
- break;
- }
- if (stat == xyzModem_eof)
- {
- CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
- ZM_DEBUG (zm_dprintf ("ACK (%d)\n", __LINE__));
- if (xyz.mode == xyzModem_ymodem)
- {
- CYGACC_COMM_IF_PUTC (*xyz.__chan,
- (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG (zm_dprintf ("Reading Final Header\n"));
- stat = xyzModem_get_hdr ();
- CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
- ZM_DEBUG (zm_dprintf ("FINAL ACK (%d)\n", __LINE__));
- }
- xyz.at_eof = true;
- break;
- }
- CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
- }
- if (stat < 0)
- {
- *err = stat;
- xyz.len = -1;
- return total;
- }
- }
- /* Don't "read" data from the EOF protocol package */
- if (!xyz.at_eof)
- {
- len = xyz.len;
- if (size < len)
- len = size;
- memcpy (buf, xyz.bufp, len);
- size -= len;
- buf += len;
- total += len;
- xyz.len -= len;
- xyz.bufp += len;
- }
- }
- return total;
-}
-
-void
-xyzModem_stream_close (int *err)
-{
- diag_printf
- ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
- xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
- xyz.total_CAN, xyz.total_retries);
- ZM_DEBUG (zm_flush ());
-}
-
-/* Need to be able to clean out the input buffer, so have to take the */
-/* getc */
-void
-xyzModem_stream_terminate (bool abort, int (*getc) (void))
-{
- int c;
-
- if (abort)
- {
- ZM_DEBUG (zm_dprintf ("!!!! TRANSFER ABORT !!!!\n"));
- switch (xyz.mode)
- {
- case xyzModem_xmodem:
- case xyzModem_ymodem:
- /* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */
- /* number of Backspaces is a friendly way to get the other end to abort. */
- CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
- CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
- /* Now consume the rest of what's waiting on the line. */
- ZM_DEBUG (zm_dprintf ("Flushing serial line.\n"));
- xyzModem_flush ();
- xyz.at_eof = true;
- break;
-#ifdef xyzModem_zmodem
- case xyzModem_zmodem:
- /* Might support it some day I suppose. */
-#endif
- break;
- }
- }
- else
- {
- ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n"));
- /*
- * Consume any trailing crap left in the inbuffer from
- * previous received blocks. Since very few files are an exact multiple
- * of the transfer block size, there will almost always be some gunk here.
- * If we don't eat it now, RedBoot will think the user typed it.
- */
- ZM_DEBUG (zm_dprintf ("Trailing gunk:\n"));
- while ((c = (*getc) ()) > -1);
- ZM_DEBUG (zm_dprintf ("\n"));
- /*
- * Make a small delay to give terminal programs like minicom
- * time to get control again after their file transfer program
- * exits.
- */
- CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
- }
-}
-
-char *
-xyzModem_error (int err)
-{
- switch (err)
- {
- case xyzModem_access:
- return "Can't access file";
- break;
- case xyzModem_noZmodem:
- return "Sorry, zModem not available yet";
- break;
- case xyzModem_timeout:
- return "Timed out";
- break;
- case xyzModem_eof:
- return "End of file";
- break;
- case xyzModem_cancel:
- return "Cancelled";
- break;
- case xyzModem_frame:
- return "Invalid framing";
- break;
- case xyzModem_cksum:
- return "CRC/checksum error";
- break;
- case xyzModem_sequence:
- return "Block sequence error";
- break;
- default:
- return "Unknown error";
- break;
- }
-}
-
-/*
- * RedBoot interface
- */
-#if 0 /* SB */
-GETC_IO_FUNCS (xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
- xyzModem_stream_terminate, xyzModem_stream_read,
- xyzModem_error);
-RedBoot_load (xmodem, xyzModem_io, false, false, xyzModem_xmodem);
-RedBoot_load (ymodem, xyzModem_io, false, false, xyzModem_ymodem);
-#endif