diff options
Diffstat (limited to 'qemu/roms/u-boot/common/cmd_otp.c')
| -rw-r--r-- | qemu/roms/u-boot/common/cmd_otp.c | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/common/cmd_otp.c b/qemu/roms/u-boot/common/cmd_otp.c new file mode 100644 index 000000000..67808aa37 --- /dev/null +++ b/qemu/roms/u-boot/common/cmd_otp.c @@ -0,0 +1,239 @@ +/* + * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory + * + * Copyright (c) 2007-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/* There are 512 128-bit "pages" (0x000 through 0x1FF). + * The pages are accessable as 64-bit "halfpages" (an upper and lower half). + * The pages are not part of the memory map. There is an OTP controller which + * handles scanning in/out of bits. While access is done through OTP MMRs, + * the bootrom provides C-callable helper functions to handle the interaction. + */ + +#include <config.h> +#include <common.h> +#include <command.h> + +#include <asm/blackfin.h> +#include <asm/clock.h> +#include <asm/mach-common/bits/otp.h> + +static const char *otp_strerror(uint32_t err) +{ + switch (err) { + case 0: return "no error"; + case OTP_WRITE_ERROR: return "OTP fuse write error"; + case OTP_READ_ERROR: return "OTP fuse read error"; + case OTP_ACC_VIO_ERROR: return "invalid OTP address"; + case OTP_DATA_MULT_ERROR: return "multiple bad bits detected"; + case OTP_ECC_MULT_ERROR: return "error in ECC bits"; + case OTP_PREV_WR_ERROR: return "space already written"; + case OTP_DATA_SB_WARN: return "single bad bit in half page"; + case OTP_ECC_SB_WARN: return "single bad bit in ECC"; + default: return "unknown error"; + } +} + +#define lowup(x) ((x) % 2 ? "upper" : "lower") + +static int check_voltage(void) +{ + /* Make sure voltage limits are within datasheet spec */ + uint16_t vr_ctl = bfin_read_VR_CTL(); + +#ifdef __ADSPBF54x__ + /* 0.9V <= VDDINT <= 1.1V */ + if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0) + return 1; +#else + /* for the parts w/out qualification yet */ + (void)vr_ctl; +#endif + + return 0; +} + +static void set_otp_timing(bool write) +{ + static uint32_t timing; + if (!timing) { + uint32_t tp1, tp2, tp3; + /* OTP_TP1 = 1000 / sclk_period (in nanoseconds) + * OTP_TP1 = 1000 / (1 / get_sclk() * 10^9) + * OTP_TP1 = (1000 * get_sclk()) / 10^9 + * OTP_TP1 = get_sclk() / 10^6 + */ + tp1 = get_sclk() / 1000000; + /* OTP_TP2 = 400 / (2 * sclk_period) + * OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9) + * OTP_TP2 = (400 * get_sclk()) / (2 * 10^9) + * OTP_TP2 = (2 * get_sclk()) / 10^7 + */ + tp2 = (2 * get_sclk() / 10000000) << 8; + /* OTP_TP3 = magic constant */ + tp3 = (0x1401) << 15; + timing = tp1 | tp2 | tp3; + } + + bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15)); +} + +int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char *cmd; + uint32_t ret, base_flags; + bool prompt_user, force_read; + uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content); + + if (argc < 4) { + usage: + return CMD_RET_USAGE; + } + + prompt_user = false; + base_flags = 0; + cmd = argv[1]; + if (!strcmp(cmd, "read")) + otp_func = bfrom_OtpRead; + else if (!strcmp(cmd, "dump")) { + otp_func = bfrom_OtpRead; + force_read = true; + } else if (!strcmp(cmd, "write")) { + otp_func = bfrom_OtpWrite; + base_flags = OTP_CHECK_FOR_PREV_WRITE; + if (!strcmp(argv[2], "--force")) { + argv++; + --argc; + } else + prompt_user = false; + } else if (!strcmp(cmd, "lock")) { + if (argc != 4) + goto usage; + otp_func = bfrom_OtpWrite; + base_flags = OTP_LOCK; + } else + goto usage; + + uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16); + uint32_t page = simple_strtoul(argv[3], NULL, 16); + uint32_t flags; + size_t i, count; + ulong half; + + if (argc > 4) + count = simple_strtoul(argv[4], NULL, 16); + else + count = 2; + + if (argc > 5) { + half = simple_strtoul(argv[5], NULL, 16); + if (half != 0 && half != 1) { + puts("Error: 'half' can only be '0' or '1'\n"); + goto usage; + } + } else + half = 0; + + /* "otp lock" has slightly different semantics */ + if (base_flags & OTP_LOCK) { + count = page; + page = (uint32_t)addr; + addr = NULL; + } + + /* do to the nature of OTP, make sure users are sure */ + if (prompt_user) { + printf( + "Writing one time programmable memory\n" + "Make sure your operating voltages and temperature are within spec\n" + " source address: 0x%p\n" + " OTP destination: %s page 0x%03X - %s page 0x%03lX\n" + " number to write: %lu halfpages\n" + " type \"YES\" (no quotes) to confirm: ", + addr, + lowup(half), page, + lowup(half + count - 1), page + (half + count - 1) / 2, + half + count + ); + + i = 0; + while (1) { + if (tstc()) { + const char exp_ans[] = "YES\r"; + char c; + putc(c = getc()); + if (exp_ans[i++] != c) { + printf(" Aborting\n"); + return 1; + } else if (!exp_ans[i]) { + puts("\n"); + break; + } + } + } + } + + printf("OTP memory %s: addr 0x%p page 0x%03X count %zu ... ", + cmd, addr, page, count); + + set_otp_timing(otp_func == bfrom_OtpWrite); + if (otp_func == bfrom_OtpWrite && check_voltage()) { + puts("ERROR: VDDINT voltage is out of spec for writing\n"); + return -1; + } + + /* Do the actual reading/writing stuff */ + ret = 0; + for (i = half; i < count + half; ++i) { + flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF); + try_again: + ret = otp_func(page, flags, addr); + if (ret & OTP_MASTER_ERROR) { + if (force_read) { + if (flags & OTP_NO_ECC) + break; + else + flags |= OTP_NO_ECC; + puts("E"); + goto try_again; + } else + break; + } else if (ret) + puts("W"); + else + puts("."); + if (!(base_flags & OTP_LOCK)) { + ++addr; + if (i % 2) + ++page; + } else + ++page; + } + if (ret & 0x1) + printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n", + page, lowup(i), ret, otp_strerror(ret)); + else + puts(" done\n"); + + /* Make sure we disable writing */ + set_otp_timing(false); + bfrom_OtpCommand(OTP_CLOSE, 0); + + return ret; +} + +U_BOOT_CMD( + otp, 7, 0, do_otp, + "One-Time-Programmable sub-system", + "read <addr> <page> [count] [half]\n" + " - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n" + "otp dump <addr> <page> [count] [half]\n" + " - like 'otp read', but skip read errors\n" + "otp write [--force] <addr> <page> [count] [half]\n" + " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n" + "otp lock <page> <count>\n" + " - lock 'count' pages starting at 'page'" +); |