1 files changed, 126 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/vpac270/vpac270.c b/qemu/roms/u-boot/board/vpac270/vpac270.c
new file mode 100644
index 000000000..8d777df84
--- /dev/null
+++ b/qemu/roms/u-boot/board/vpac270/vpac270.c
@@ -0,0 +1,126 @@
+/*
+ * Voipac PXA270 Support
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/regs-mmc.h>
+#include <asm/arch/pxa.h>
+#include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	/* We have RAM, disable cache */
+	dcache_disable();
+	icache_disable();
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* Arch number of vpac270 */
+	gd->bd->bi_arch_number = MACH_TYPE_VPAC270;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+#ifndef	CONFIG_ONENAND
+	pxa2xx_dram_init();
+#endif
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+#ifdef	CONFIG_RAM_256M
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
+}
+
+#ifdef	CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
+#ifdef	CONFIG_CMD_USB
+int board_usb_init(int index, enum usb_init_type init)
+{
+	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+		UHCHR);
+
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+
+	while (readl(UHCHR) & UHCHR_FSBIR)
+		;
+
+	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
+
+	/* Clear any OTG Pin Hold */
+	if (readl(PSSR) & PSSR_OTGPH)
+		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
+
+	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
+
+	/* Set port power control mask bits, only 3 ports. */
+	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
+
+	/* enable port 2 */
+	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+		UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
+
+	return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+	return 0;
+}
+
+void usb_board_stop(void)
+{
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+	udelay(11);
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+	writel(readl(UHCCOMS) | 1, UHCCOMS);
+	udelay(10);
+
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+
+	return;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif