diff options
Diffstat (limited to 'qemu/roms/u-boot/board/taskit')
| -rw-r--r-- | qemu/roms/u-boot/board/taskit/stamp9g20/Makefile | 17 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/taskit/stamp9g20/led.c | 122 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/taskit/stamp9g20/stamp9g20.c | 159 |
3 files changed, 298 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/taskit/stamp9g20/Makefile b/qemu/roms/u-boot/board/taskit/stamp9g20/Makefile new file mode 100644 index 000000000..d015e0f74 --- /dev/null +++ b/qemu/roms/u-boot/board/taskit/stamp9g20/Makefile @@ -0,0 +1,17 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2012 +# Markus Hubig <mhubig@imko.de> +# IMKO GmbH <www.imko.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += stamp9g20.o +obj-y += led.o diff --git a/qemu/roms/u-boot/board/taskit/stamp9g20/led.c b/qemu/roms/u-boot/board/taskit/stamp9g20/led.c new file mode 100644 index 000000000..c5831258b --- /dev/null +++ b/qemu/roms/u-boot/board/taskit/stamp9g20/led.c @@ -0,0 +1,122 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * (C) Copyright 2009 + * Eric Benard <eric@eukrea.com> + * + * (C) Copyright 2012 + * Markus Hubig <mhubig@imko.de> + * IMKO GmbH <www.imko.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pmc.h> +#include <status_led.h> + +static unsigned int saved_state[3] = {STATUS_LED_OFF, + STATUS_LED_OFF, STATUS_LED_OFF}; + +void coloured_LED_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable the clock */ + writel(ATMEL_ID_PIOC, &pmc->pcer); + + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); + + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); +} + +void red_led_on(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 1); + saved_state[STATUS_LED_RED] = STATUS_LED_ON; +} + +void red_led_off(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 0); + saved_state[STATUS_LED_RED] = STATUS_LED_OFF; +} + +void green_led_on(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; +} + +void green_led_off(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 0); + saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; +} + +void yellow_led_on(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); + saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; +} + +void yellow_led_off(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); + saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; +} + +void __led_init(led_id_t mask, int state) +{ + __led_set(mask, state); +} + +void __led_toggle(led_id_t mask) +{ + if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) + red_led_off(); + else + red_led_on(); + + } else if (STATUS_LED_GREEN == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN]) + green_led_off(); + else + green_led_on(); + + } else if (STATUS_LED_YELLOW == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW]) + yellow_led_off(); + else + yellow_led_on(); + } +} + +void __led_set(led_id_t mask, int state) +{ + if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == state) + red_led_on(); + else + red_led_off(); + + } else if (STATUS_LED_GREEN == mask) { + if (STATUS_LED_ON == state) + green_led_on(); + else + green_led_off(); + + } else if (STATUS_LED_YELLOW == mask) { + if (STATUS_LED_ON == state) + yellow_led_on(); + else + yellow_led_off(); + } +} diff --git a/qemu/roms/u-boot/board/taskit/stamp9g20/stamp9g20.c b/qemu/roms/u-boot/board/taskit/stamp9g20/stamp9g20.c new file mode 100644 index 000000000..27cdf77f0 --- /dev/null +++ b/qemu/roms/u-boot/board/taskit/stamp9g20/stamp9g20.c @@ -0,0 +1,159 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * Achim Ehrlich <aehrlich@taskit.de> + * taskit GmbH <www.taskit.de> + * + * (C) Copyright 2012- + * Markus Hubig <mhubig@imko.de> + * IMKO GmbH <www.imko.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <watchdog.h> + +#ifdef CONFIG_MACB +# include <net.h> +# include <netdev.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void stamp9G20_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + unsigned long csa; + + /* Assign CS3 to NAND/SmartMedia Interface */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} + +#ifdef CONFIG_MACB +static void stamp9G20_macb_hw_init(void) +{ + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; + + /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ + at91_set_gpio_output(AT91_PIN_PA26, 0); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA18) | + pin_to_mask(AT91_PIN_PA28), + &pioa->pudr); + + at91_phy_reset(); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA18) | + pin_to_mask(AT91_PIN_PA28), + &pioa->puer); + + /* Initialize EMAC=MACB hardware */ + at91_macb_hw_init(); +} +#endif /* CONFIG_MACB */ + +int board_early_init_f(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable clocks for all PIOs */ + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOC), &pmc->pcer); + + return 0; +} + +int board_postclk_init(void) +{ + /* + * Initialize the serial interface here, because be need a running + * timer to set PC9 to high and wait for some time to enable the + * level converter of the RS232 interface on the PortuxG20 board. + */ + +#ifdef CONFIG_PORTUXG20 + at91_set_gpio_output(AT91_PIN_PC9, 1); + mdelay(1); +#endif + at91_seriald_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + stamp9G20_nand_hw_init(); +#ifdef CONFIG_MACB + stamp9G20_macb_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +#ifdef CONFIG_MACB +int board_eth_init(bd_t *bis) +{ + return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); +} +#endif /* CONFIG_MACB */ |