1 files changed, 92 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/st/nhk8815/nhk8815.c b/qemu/roms/u-boot/board/st/nhk8815/nhk8815.c
new file mode 100644
index 000000000..94d0f7626
--- /dev/null
+++ b/qemu/roms/u-boot/board/st/nhk8815/nhk8815.c
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2005
+ * STMicrolelctronics, <www.st.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+void show_boot_progress(int progress)
+{
+	printf("%i\n", progress);
+}
+#endif
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
+	gd->bd->bi_boot_params = 0x00000100;
+	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
+	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
+	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
+	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
+
+	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
+	writel(0x0000305b, REG_FSMC_BCR1);
+	writel(0x00033f33, REG_FSMC_BTR1);
+
+	/* Set up SMCS0 for OneNand: sram-like once again */
+	writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */
+	writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */
+
+	icache_enable();
+	return 0;
+}
+
+int board_late_init(void)
+{
+	/* Set the two I2C gpio lines to be gpio high */
+	nmk_gpio_set(__SCL, 1);	nmk_gpio_set(__SDA, 1);
+	nmk_gpio_dir(__SCL, 1);	nmk_gpio_dir(__SDA, 1);
+	nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO);
+
+	/* Reset the I2C port expander, on GPIO77 */
+	nmk_gpio_af(77, GPIO_GPIO);
+	nmk_gpio_dir(77, 1);
+	nmk_gpio_set(77, 0);
+	udelay(10);
+	nmk_gpio_set(77, 1);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC91111
+	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+	return rc;
+}
+#endif