diff options
Diffstat (limited to 'qemu/roms/u-boot/board/samsung/trats/trats.c')
| -rw-r--r-- | qemu/roms/u-boot/board/samsung/trats/trats.c | 612 |
1 files changed, 612 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/samsung/trats/trats.c b/qemu/roms/u-boot/board/samsung/trats/trats.c new file mode 100644 index 000000000..ab0ad1d65 --- /dev/null +++ b/qemu/roms/u-boot/board/samsung/trats/trats.c @@ -0,0 +1,612 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Heungjun Kim <riverful.kim@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * Donghwa Lee <dh09.lee@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <lcd.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/clock.h> +#include <asm/arch/mipi_dsim.h> +#include <asm/arch/watchdog.h> +#include <asm/arch/power.h> +#include <power/pmic.h> +#include <usb/s3c_udc.h> +#include <power/max8997_pmic.h> +#include <power/max8997_muic.h> +#include <power/battery.h> +#include <power/max17042_fg.h> +#include <libtizen.h> +#include <usb.h> +#include <usb_mass_storage.h> + +#include "setup.h" + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int board_rev; + +#ifdef CONFIG_REVISION_TAG +u32 get_board_rev(void) +{ + return board_rev; +} +#endif + +static void check_hw_revision(void); +struct s3c_plat_otg_data s5pc210_otg_data; + +int exynos_init(void) +{ + check_hw_revision(); + printf("HW Revision:\t0x%x\n", board_rev); + + return 0; +} + +void i2c_init_board(void) +{ + int err; + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + /* I2C_5 -> PMIC */ + err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE); + if (err) { + debug("I2C%d not configured\n", (I2C_5)); + return; + } + + /* I2C_8 -> FG */ + s5p_gpio_direction_output(&gpio2->y4, 0, 1); + s5p_gpio_direction_output(&gpio2->y4, 1, 1); +} + +static void trats_low_power_mode(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + struct exynos4_power *pwr = + (struct exynos4_power *)samsung_get_base_power(); + + /* Power down CORE1 */ + /* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */ + writel(0x0, &pwr->arm_core1_configuration); + + /* Change the APLL frequency */ + /* ENABLE (1 enable) | LOCKED (1 locked) */ + /* [31] | [29] */ + /* FSEL | MDIV | PDIV | SDIV */ + /* [27] | [25:16] | [13:8] | [2:0] */ + writel(0xa0c80604, &clk->apll_con0); + + /* Change CPU0 clock divider */ + /* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */ + /* [30:28] | [26:24] | [22:20] | [18:16] */ + /* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */ + /* [14:12] | [10:8] | [6:4] | [2:0] */ + writel(0x00000100, &clk->div_cpu0); + + /* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */ + while (readl(&clk->div_stat_cpu0) & 0x1111111) + continue; + + /* Change clock divider ratio for DMC */ + /* DMCP_RATIO | DMCD_RATIO */ + /* [22:20] | [18:16] */ + /* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */ + /* [14:12] | [10:8] | [6:4] | [2:0] */ + writel(0x13113117, &clk->div_dmc0); + + /* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */ + while (readl(&clk->div_stat_dmc0) & 0x11111111) + continue; + + /* Turn off unnecessary power domains */ + writel(0x0, &pwr->xxti_configuration); /* XXTI */ + writel(0x0, &pwr->cam_configuration); /* CAM */ + writel(0x0, &pwr->tv_configuration); /* TV */ + writel(0x0, &pwr->mfc_configuration); /* MFC */ + writel(0x0, &pwr->g3d_configuration); /* G3D */ + writel(0x0, &pwr->gps_configuration); /* GPS */ + writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */ + + /* Turn off unnecessary clocks */ + writel(0x0, &clk->gate_ip_cam); /* CAM */ + writel(0x0, &clk->gate_ip_tv); /* TV */ + writel(0x0, &clk->gate_ip_mfc); /* MFC */ + writel(0x0, &clk->gate_ip_g3d); /* G3D */ + writel(0x0, &clk->gate_ip_image); /* IMAGE */ + writel(0x0, &clk->gate_ip_gps); /* GPS */ +} + +static int pmic_init_max8997(void) +{ + struct pmic *p = pmic_get("MAX8997_PMIC"); + int i = 0, ret = 0; + u32 val; + + if (pmic_probe(p)) + return -1; + + /* BUCK1 VARM: 1.2V */ + val = (1200000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val); + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val); + + /* BUCK2 VINT: 1.1V */ + val = (1100000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val); + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val); + + + /* BUCK3 G3D: 1.1V - OFF */ + ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val); + val &= ~ENBUCK; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val); + + val = (1100000 - 750000) / 50000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val); + + /* BUCK4 CAMISP: 1.2V - OFF */ + ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val); + val &= ~ENBUCK; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val); + + val = (1200000 - 650000) / 25000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val); + + /* BUCK5 VMEM: 1.2V */ + val = (1200000 - 650000) / 25000; + for (i = 0; i < 8; i++) + ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val); + + val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val); + + /* BUCK6 CAM AF: 2.8V */ + /* No Voltage Setting Register */ + /* GNSLCT 3.0X */ + val = GNSLCT; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val); + + /* BUCK7 VCC_SUB: 2.0V */ + val = (2000000 - 750000) / 50000; + ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val); + + /* LDO1 VADC: 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val); + + /* LDO1 Disable active discharging */ + ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val); + val &= ~LDO_ADE; + ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val); + + /* LDO2 VALIVE: 1.1V */ + val = max8997_reg_ldo(1100000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val); + + /* LDO3 VUSB/MIPI: 1.1V */ + val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val); + + /* LDO4 VMIPI: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val); + + /* LDO5 VHSIC: 1.2V */ + val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val); + + /* LDO6 VCC_1.8V_PDA: 1.8V */ + val = max8997_reg_ldo(1800000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val); + + /* LDO7 CAM_ISP: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val); + + /* LDO8 VDAC/VUSB: 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val); + + /* LDO9 VCC_2.8V_PDA: 2.8V */ + val = max8997_reg_ldo(2800000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val); + + /* LDO10 VPLL: 1.1V */ + val = max8997_reg_ldo(1100000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val); + + /* LDO11 TOUCH: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val); + + /* LDO12 VTCAM: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val); + + /* LDO13 VCC_3.0_LCD: 3.0V */ + val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val); + + /* LDO14 MOTOR: 3.0V */ + val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val); + + /* LDO15 LED_A: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val); + + /* LDO16 CAM_SENSOR: 1.8V */ + val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val); + + /* LDO17 VTF: 2.8V */ + val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val); + + /* LDO18 TOUCH_LED 3.3V */ + val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val); + + /* LDO21 VDDQ: 1.2V */ + val = max8997_reg_ldo(1200000) | EN_LDO; + ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val); + + /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */ + val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) | + ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2; + ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val); + + if (ret) { + puts("MAX8997 PMIC setting error!\n"); + return -1; + } + return 0; +} + +int exynos_power_init(void) +{ + int chrg, ret; + struct power_battery *pb; + struct pmic *p_fg, *p_chrg, *p_muic, *p_bat; + + /* + * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + * + * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected + * to logical I2C adapter 1 + */ + ret = pmic_init(I2C_5); + ret |= pmic_init_max8997(); + ret |= power_fg_init(I2C_9); + ret |= power_muic_init(I2C_5); + ret |= power_bat_init(0); + if (ret) + return ret; + + p_fg = pmic_get("MAX17042_FG"); + if (!p_fg) { + puts("MAX17042_FG: Not found\n"); + return -ENODEV; + } + + p_chrg = pmic_get("MAX8997_PMIC"); + if (!p_chrg) { + puts("MAX8997_PMIC: Not found\n"); + return -ENODEV; + } + + p_muic = pmic_get("MAX8997_MUIC"); + if (!p_muic) { + puts("MAX8997_MUIC: Not found\n"); + return -ENODEV; + } + + p_bat = pmic_get("BAT_TRATS"); + if (!p_bat) { + puts("BAT_TRATS: Not found\n"); + return -ENODEV; + } + + p_fg->parent = p_bat; + p_chrg->parent = p_bat; + p_muic->parent = p_bat; + + p_bat->low_power_mode = trats_low_power_mode; + p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic); + + pb = p_bat->pbat; + chrg = p_muic->chrg->chrg_type(p_muic); + debug("CHARGER TYPE: %d\n", chrg); + + if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { + puts("No battery detected\n"); + return -1; + } + + p_fg->fg->fg_battery_check(p_fg, p_bat); + + if (pb->bat->state == CHARGE && chrg == CHARGER_USB) + puts("CHARGE Battery !\n"); + + return 0; +} + +static unsigned int get_hw_revision(void) +{ + struct exynos4_gpio_part1 *gpio = + (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1(); + int hwrev = 0; + int i; + + /* hw_rev[3:0] == GPE1[3:0] */ + for (i = 0; i < 4; i++) { + s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT); + s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE); + } + + udelay(1); + + for (i = 0; i < 4; i++) + hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i); + + debug("hwrev 0x%x\n", hwrev); + + return hwrev; +} + +static void check_hw_revision(void) +{ + int hwrev; + + hwrev = get_hw_revision(); + + board_rev |= hwrev; +} + + +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) +{ + int ret = 0; + u32 val = 0; + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return -1; + + if (on) { + ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, + ENSAFEOUT1, LDO_ON); + ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val); + + ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val); + } else { + ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val); + + ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val); + ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, + ENSAFEOUT1, LDO_OFF); + } + + if (ret) { + puts("MAX8997 LDO setting error!\n"); + return -1; + } + + return 0; +} + +struct s3c_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4_USBPHY_BASE, + .regs_otg = EXYNOS4_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("USB_udc_probe\n"); + return s3c_udc_probe(&s5pc210_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + struct pmic *muic = pmic_get("MAX8997_MUIC"); + if (!muic) + return 0; + + return !!muic->chrg->chrg_type(muic); +} +#endif + +static void pmic_reset(void) +{ + struct exynos4_gpio_part2 *gpio = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + s5p_gpio_direction_output(&gpio->x0, 7, 1); + s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE); +} + +static void board_clock_init(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + + writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu); + writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0); + writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys); + writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0); + + writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0); + writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1); + writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0); + writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1); + writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus); + writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus); + writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top); + writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1); + writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2); + writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3); + writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0); + writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3); + + writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock); + writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock); + writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock); + writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock); + writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1); + writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0); + writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1); + writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0); + writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1); + writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0); + writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1); + writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0); + + writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam); + writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv); + writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc); + writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d); + writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image); + writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0); + writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1); + writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys); + writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps); + writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril); + writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir); + writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block); +} + +static void board_power_init(void) +{ + struct exynos4_power *pwr = + (struct exynos4_power *)samsung_get_base_power(); + + /* PS HOLD */ + writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control); + + /* Set power down */ + writel(0, (unsigned int)&pwr->cam_configuration); + writel(0, (unsigned int)&pwr->tv_configuration); + writel(0, (unsigned int)&pwr->mfc_configuration); + writel(0, (unsigned int)&pwr->g3d_configuration); + writel(0, (unsigned int)&pwr->lcd1_configuration); + writel(0, (unsigned int)&pwr->gps_configuration); + writel(0, (unsigned int)&pwr->gps_alive_configuration); + + /* It is necessary to power down core 1 */ + /* to successfully boot CPU1 in kernel */ + writel(0, (unsigned int)&pwr->arm_core1_configuration); +} + +static void exynos_uart_init(void) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + /* UART_SEL GPY4[7] (part2) at EXYNOS4 */ + s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP); + s5p_gpio_direction_output(&gpio2->y4, 7, 1); +} + +int exynos_early_init_f(void) +{ + wdt_stop(); + pmic_reset(); + board_clock_init(); + exynos_uart_init(); + board_power_init(); + + return 0; +} + +void exynos_reset_lcd(void) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + s5p_gpio_direction_output(&gpio2->y4, 5, 1); + udelay(10000); + s5p_gpio_direction_output(&gpio2->y4, 5, 0); + udelay(10000); + s5p_gpio_direction_output(&gpio2->y4, 5, 1); +} + +int lcd_power(void) +{ + int ret = 0; + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return 0; + + /* LDO15 voltage: 2.2v */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO); + /* LDO13 voltage: 3.0v */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO); + + if (ret) { + puts("MAX8997 LDO setting error!\n"); + return -1; + } + + return 0; +} + +int mipi_power(void) +{ + int ret = 0; + struct pmic *p = pmic_get("MAX8997_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return 0; + + /* LDO3 voltage: 1.1v */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO); + /* LDO4 voltage: 1.8v */ + ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO); + + if (ret) { + puts("MAX8997 LDO setting error!\n"); + return -1; + } + + return 0; +} + +void exynos_lcd_misc_init(vidinfo_t *vid) +{ +#ifdef CONFIG_TIZEN + get_tizen_logo_info(vid); +#endif +#ifdef CONFIG_S6E8AX0 + s6e8ax0_init(); + setenv("lcdinfo", "lcd=s6e8ax0"); +#endif +} |