1 files changed, 139 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/samsung/smdk2410/smdk2410.c b/qemu/roms/u-boot/board/samsung/smdk2410/smdk2410.c
new file mode 100644
index 000000000..b75a0e34d
--- /dev/null
+++ b/qemu/roms/u-boot/board/samsung/smdk2410/smdk2410.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002, 2010
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/s3c24x0_cpu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
+#define M_MDIV	0xA1
+#define M_PDIV	0x3
+#define M_SDIV	0x1
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK==0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK==1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif
+
+static inline void pll_delay(unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_early_init_f(void)
+{
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+	/* to reduce PLL lock time, adjust the LOCKTIME register */
+	writel(0xFFFFFF, &clk_power->locktime);
+
+	/* configure MPLL */
+	writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
+	       &clk_power->mpllcon);
+
+	/* some delay between MPLL and UPLL */
+	pll_delay(4000);
+
+	/* configure UPLL */
+	writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
+	       &clk_power->upllcon);
+
+	/* some delay between MPLL and UPLL */
+	pll_delay(8000);
+
+	/* set up the I/O ports */
+	writel(0x007FFFFF, &gpio->gpacon);
+	writel(0x00044555, &gpio->gpbcon);
+	writel(0x000007FF, &gpio->gpbup);
+	writel(0xAAAAAAAA, &gpio->gpccon);
+	writel(0x0000FFFF, &gpio->gpcup);
+	writel(0xAAAAAAAA, &gpio->gpdcon);
+	writel(0x0000FFFF, &gpio->gpdup);
+	writel(0xAAAAAAAA, &gpio->gpecon);
+	writel(0x0000FFFF, &gpio->gpeup);
+	writel(0x000055AA, &gpio->gpfcon);
+	writel(0x000000FF, &gpio->gpfup);
+	writel(0xFF95FFBA, &gpio->gpgcon);
+	writel(0x0000FFFF, &gpio->gpgup);
+	writel(0x002AFAAA, &gpio->gphcon);
+	writel(0x000007FF, &gpio->gphup);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of SMDK2410-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x30000100;
+
+	icache_enable();
+	dcache_enable();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_CS8900
+	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
+#endif
+	return rc;
+}
+#endif
+
+/*
+ * Hardcoded flash setup:
+ * Flash 0 is a non-CFI AMD AM29LV800BB flash.
+ */
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+	info->portwidth = FLASH_CFI_16BIT;
+	info->chipwidth = FLASH_CFI_BY16;
+	info->interface = FLASH_CFI_X16;
+	return 1;
+}