diff options
Diffstat (limited to 'qemu/roms/u-boot/board/samsung/goni')
| -rw-r--r-- | qemu/roms/u-boot/board/samsung/goni/Makefile | 12 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/samsung/goni/goni.c | 192 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/samsung/goni/lowlevel_init.S | 446 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/samsung/goni/onenand.c | 21 |
4 files changed, 671 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/samsung/goni/Makefile b/qemu/roms/u-boot/board/samsung/goni/Makefile new file mode 100644 index 000000000..2cdc21d85 --- /dev/null +++ b/qemu/roms/u-boot/board/samsung/goni/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := goni.o onenand.o +obj-y += lowlevel_init.o diff --git a/qemu/roms/u-boot/board/samsung/goni/goni.c b/qemu/roms/u-boot/board/samsung/goni/goni.c new file mode 100644 index 000000000..61b9ece03 --- /dev/null +++ b/qemu/roms/u-boot/board/samsung/goni/goni.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> +#include <power/pmic.h> +#include <usb/s3c_udc.h> +#include <asm/arch/cpu.h> +#include <power/max8998_pmic.h> +#include <samsung/misc.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct s5pc110_gpio *s5pc110_gpio; + +u32 get_board_rev(void) +{ + return 0; +} + +int board_init(void) +{ + /* Set Initial global variables */ + s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE; + + gd->bd->bi_arch_number = MACH_TYPE_GONI; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int power_init_board(void) +{ + int ret; + + /* + * For PMIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + */ + ret = pmic_init(I2C_0); + if (ret) + return ret; + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE + + PHYS_SDRAM_3_SIZE; + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + puts("Board:\tGoni\n"); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i, ret, ret_sd = 0; + + /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ + s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1); + + /* + * MMC0 GPIO + * GPG0[0] SD_0_CLK + * GPG0[1] SD_0_CMD + * GPG0[2] SD_0_CDn -> Not used + * GPG0[3:6] SD_0_DATA[0:3] + */ + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + /* GPG0[0:6] special function 2 */ + s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2); + /* GPG0[0:6] pull disable */ + s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE); + /* GPG0[0:6] drv 4x */ + s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); + } + + ret = s5p_mmc_init(0, 4); + if (ret) + error("MMC: Failed to init MMC:0.\n"); + + /* + * SD card (T_FLASH) detect and init + * T_FLASH_DETECT: EINT28: GPH3[4] input mode + */ + s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT); + s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP); + + if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) { + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + + /* GPG2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2); + /* GPG2[0:6] pull disable */ + s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE); + /* GPG2[0:6] drv 4x */ + s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X); + } + + ret_sd = s5p_mmc_init(2, 4); + if (ret_sd) + error("MMC: Failed to init SD card (MMC:2).\n"); + } + + return ret & ret_sd; +} +#endif + +#ifdef CONFIG_USB_GADGET +static int s5pc1xx_phy_control(int on) +{ + int ret; + static int status; + struct pmic *p = pmic_get("MAX8998_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return -1; + + if (on && !status) { + ret = pmic_set_output(p, MAX8998_REG_ONOFF1, + MAX8998_LDO3, LDO_ON); + ret = pmic_set_output(p, MAX8998_REG_ONOFF2, + MAX8998_LDO8, LDO_ON); + if (ret) { + puts("MAX8998 LDO setting error!\n"); + return -1; + } + status = 1; + } else if (!on && status) { + ret = pmic_set_output(p, MAX8998_REG_ONOFF1, + MAX8998_LDO3, LDO_OFF); + ret = pmic_set_output(p, MAX8998_REG_ONOFF2, + MAX8998_LDO8, LDO_OFF); + if (ret) { + puts("MAX8998 LDO setting error!\n"); + return -1; + } + status = 0; + } + udelay(10000); + + return 0; +} + +struct s3c_plat_otg_data s5pc110_otg_data = { + .phy_control = s5pc1xx_phy_control, + .regs_phy = S5PC110_PHY_BASE, + .regs_otg = S5PC110_OTG_BASE, + .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL, +}; +#endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif + return 0; +} +#endif diff --git a/qemu/roms/u-boot/board/samsung/goni/lowlevel_init.S b/qemu/roms/u-boot/board/samsung/goni/lowlevel_init.S new file mode 100644 index 000000000..d52bc09f8 --- /dev/null +++ b/qemu/roms/u-boot/board/samsung/goni/lowlevel_init.S @@ -0,0 +1,446 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/power.h> + +/* + * Register usages: + * + * r5 has zero always + * r7 has S5PC100 GPIO base, 0xE0300000 + * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively + * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on + */ + + .globl lowlevel_init +lowlevel_init: + mov r11, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r7, =S5PC100_GPIO_BASE + ldr r8, =S5PC100_GPIO_BASE + /* Read CPU ID */ + ldr r2, =S5PC110_PRO_ID + ldr r0, [r2] + mov r1, #0x00010000 + and r0, r0, r1 + cmp r0, r5 + beq 100f + ldr r8, =S5PC110_GPIO_BASE +100: + /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */ + cmp r7, r8 + beq skip_check_didle @ Support C110 only + + ldr r0, =S5PC110_RST_STAT + ldr r1, [r0] + and r1, r1, #0x000D0000 + cmp r1, #(0x1 << 19) @ DEEPIDLE_WAKEUP + beq didle_wakeup + cmp r7, r8 + +skip_check_didle: + addeq r0, r8, #0x280 @ S5PC100_GPIO_J4 + addne r0, r8, #0x2C0 @ S5PC110_GPIO_J4 + ldr r1, [r0, #0x0] @ GPIO_CON_OFFSET + bic r1, r1, #(0xf << 4) @ 1 * 4-bit + orr r1, r1, #(0x1 << 4) + str r1, [r0, #0x0] @ GPIO_CON_OFFSET + + ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET + bic r1, r1, #(1 << 1) + str r1, [r0, #0x4] @ GPIO_DAT_OFFSET + + /* Don't setup at s5pc100 */ + beq 100f + + /* + * Initialize Async Register Setting for EVT1 + * Because we are setting EVT1 as the default value of EVT0, + * setting EVT0 as well does not make things worse. + * Thus, for the simplicity, we set for EVT0, too + * + * The "Async Registers" are: + * 0xE0F0_0000 + * 0xE1F0_0000 + * 0xF180_0000 + * 0xF190_0000 + * 0xF1A0_0000 + * 0xF1B0_0000 + * 0xF1C0_0000 + * 0xF1D0_0000 + * 0xF1E0_0000 + * 0xF1F0_0000 + * 0xFAF0_0000 + */ + ldr r0, =0xe0f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xe1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1800000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1900000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1a00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1b00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1c00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1d00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1e00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xf1f00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + ldr r0, =0xfaf00000 + ldr r1, [r0] + bic r1, r1, #0x1 + str r1, [r0] + + /* + * Diable ABB block to reduce sleep current at low temperature + * Note that it's hidden register setup don't modify it + */ + ldr r0, =0xE010C300 + ldr r1, =0x00800000 + str r1, [r0] + +100: + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + /* Do not release retention here for S5PC110 */ + streq r1, [r0] + + /* Disable Watchdog */ + ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000 + ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000 + str r5, [r0] + + /* setting SRAM */ + ldreq r0, =S5PC100_SROMC_BASE + ldrne r0, =S5PC110_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] + + /* S5PC100 has 3 groups of interrupt sources */ + ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000 + ldrne r0, =S5PC110_VIC0_BASE @ 0xF2000000 + add r1, r0, #0x00100000 + add r2, r0, #0x00200000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @ INTENCLEAR + str r3, [r1, #0x14] @ INTENCLEAR + str r3, [r2, #0x14] @ INTENCLEAR + + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @ INTSELECT + str r5, [r1, #0xc] @ INTSELECT + str r5, [r2, #0xc] @ INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @ INTADDRESS + str r5, [r1, #0xf00] @ INTADDRESS + str r5, [r2, #0xf00] @ INTADDRESS + + /* for UART */ + bl uart_asm_init + + bl internal_ram_init + + cmp r7, r8 + /* Clear wakeup status register */ + ldreq r0, =S5PC100_WAKEUP_STAT + ldrne r0, =S5PC110_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* IO retension release */ + ldreq r0, =S5PC100_OTHERS @ 0xE0108200 + ldrne r0, =S5PC110_OTHERS @ 0xE010E000 + ldr r1, [r0] + ldreq r2, =(1 << 31) @ IO_RET_REL + ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) + orr r1, r1, r2 + str r1, [r0] + + b 1f + +didle_wakeup: + /* Wait when APLL is locked */ + ldr r0, =0xE0100100 @ S5PC110_APLL_CON +lockloop: + ldr r1, [r0] + and r1, r1, #(1 << 29) + cmp r1, #(1 << 29) + bne lockloop + + ldr r0, =S5PC110_INFORM0 + ldr r1, [r0] + mov pc, r1 + nop + nop + nop + nop + nop + +1: + mov lr, r11 + mov pc, lr + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000 + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f +100: + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x000] @ S5PC100_APLL_LOCK + str r1, [r0, #0x004] @ S5PC100_MPLL_LOCK + str r1, [r0, #0x008] @ S5PC100_EPLL_LOCK + str r1, [r0, #0x00C] @ S5PC100_HPLL_LOCK + + /* S5P_APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1333MHz) + str r1, [r0, #0x100] + /* S5P_MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r0, #0x104] + /* S5P_EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r0, #0x108] + /* S5P_HPLL_CON */ + ldr r1, =0x80600603 @ SDIV 3, PDIV 6, MDIV 96 + str r1, [r0, #0x10C] + + ldr r1, [r0, #0x300] + ldr r2, =0x00003fff + bic r1, r1, r2 + ldr r2, =0x00011301 + + orr r1, r1, r2 + str r1, [r0, #0x300] + ldr r1, [r0, #0x304] + ldr r2, =0x00011110 + orr r1, r1, r2 + str r1, [r0, #0x304] + ldr r1, =0x00000001 + str r1, [r0, #0x308] + + /* Set Source Clock */ + ldr r1, =0x00001111 @ A, M, E, HPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + b 200f +110: + ldr r0, =0xE010C000 @ S5PC110_PWR_CFG + + /* Set OSC_FREQ value */ + ldr r1, =0xf + str r1, [r0, #0x100] @ S5PC110_OSC_FREQ + + /* Set MTC_STABLE value */ + ldr r1, =0xffffffff + str r1, [r0, #0x110] @ S5PC110_MTC_STABLE + + /* Set CLAMP_STABLE value */ + ldr r1, =0x3ff03ff + str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE + + ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5 + str r1, [r0, #0x300] + ldr r1, =0x11110111 @ UART[3210]: MMC[3210] + str r1, [r0, #0x310] + + /* Set Lock Time */ + ldr r1, =0x2cf @ Locktime : 30us + str r1, [r0, #0x000] @ S5PC110_APLL_LOCK + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r0, #0x008] @ S5PC110_MPLL_LOCK + str r1, [r0, #0x010] @ S5PC110_EPLL_LOCK + str r1, [r0, #0x020] @ S5PC110_VPLL_LOCK + + /* S5PC110_APLL_CON */ + ldr r1, =0x80C80601 @ 800MHz + str r1, [r0, #0x100] + /* S5PC110_MPLL_CON */ + ldr r1, =0x829B0C01 @ 667MHz + str r1, [r0, #0x108] + /* S5PC110_EPLL_CON */ + ldr r1, =0x80600602 @ 96MHz VSEL 0 P 6 M 96 S 2 + str r1, [r0, #0x110] + /* S5PC110_VPLL_CON */ + ldr r1, =0x806C0603 @ 54MHz + str r1, [r0, #0x120] + + /* Set Source Clock */ + ldr r1, =0x10001111 @ A, M, E, VPLL Muxing + str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 + + /* OneDRAM(DMC0) clock setting */ + ldr r1, =0x01000000 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL + str r1, [r0, #0x218] @ S5PC110_CLK_SRC6 + ldr r1, =0x30000000 @ ONEDRAM_RATIO[31:28] 3 + 1 + str r1, [r0, #0x318] @ S5PC110_CLK_DIV6 + + /* XCLKOUT = XUSBXTI 24MHz */ + add r2, r0, #0xE000 @ S5PC110_OTHERS + ldr r1, [r2] + orr r1, r1, #(0x3 << 8) @ CLKOUT[9:8] 3 XUSBXTI + str r1, [r2] + + /* CLK_IP0 */ + ldr r1, =0x8fefeeb @ DMC[1:0] PDMA0[3] IMEM[5] + str r1, [r0, #0x460] @ S5PC110_CLK_IP0 + + /* CLK_IP1 */ + ldr r1, =0xe9fdf0f9 @ FIMD[0] USBOTG[16] + @ NANDXL[24] + str r1, [r0, #0x464] @ S5PC110_CLK_IP1 + + /* CLK_IP2 */ + ldr r1, =0xf75f7fc @ CORESIGHT[8] MODEM[9] + @ HOSTIF[10] HSMMC0[16] + @ HSMMC2[18] VIC[27:24] + str r1, [r0, #0x468] @ S5PC110_CLK_IP2 + + /* CLK_IP3 */ + ldr r1, =0x8eff038c @ I2C[8:6] + @ SYSTIMER[16] UART0[17] + @ UART1[18] UART2[19] + @ UART3[20] WDT[22] + @ PWM[23] GPIO[26] SYSCON[27] + str r1, [r0, #0x46c] @ S5PC110_CLK_IP3 + + /* CLK_IP4 */ + ldr r1, =0xfffffff1 @ CHIP_ID[0] TZPC[8:5] + str r1, [r0, #0x470] @ S5PC110_CLK_IP3 + +200: + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +internal_ram_init: + ldreq r0, =0xE3800000 + ldrne r0, =0xF1500000 + ldr r1, =0x0 + str r1, [r0] + + mov pc, lr + +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + /* set GPIO to enable UART0-UART4 */ + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ S5PC100_GPIO_A0_OFFSET + ldr r1, =0x00002222 + str r1, [r0, #0x20] @ S5PC100_GPIO_A1_OFFSET + + /* Check S5PC100 */ + cmp r7, r8 + bne 110f + + /* UART_SEL GPK0[5] at S5PC100 */ + add r0, r8, #0x2A0 @ S5PC100_GPIO_K0_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 20) @ 20 = 5 * 4-bit + orr r1, r1, #(0x1 << 20) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 10) @ 10 = 5 * 2-bit + orr r1, r1, #(0x2 << 10) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 5) @ 5 = 5 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + + b 200f +110: + /* + * Note that the following address + * 0xE020'0360 is reserved address at S5PC100 + */ + /* UART_SEL MP0_5[7] at S5PC110 */ + add r0, r8, #0x360 @ S5PC110_GPIO_MP0_5_OFFSET + ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit + orr r1, r1, #(0x1 << 28) @ Output + str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET + + ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit + orr r1, r1, #(0x2 << 14) @ Pull-up enabled + str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET + + ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit + str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET +200: + mov pc, lr diff --git a/qemu/roms/u-boot/board/samsung/goni/onenand.c b/qemu/roms/u-boot/board/samsung/goni/onenand.c new file mode 100644 index 000000000..b74d8e8ac --- /dev/null +++ b/qemu/roms/u-boot/board/samsung/goni/onenand.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/samsung_onenand.h> +#include <onenand_uboot.h> + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; + this->chip_probe = s5pc110_chip_probe; +} |