1 files changed, 53 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/quad100hd/nand.c b/qemu/roms/u-boot/board/quad100hd/nand.c
new file mode 100644
index 000000000..47bbb6b26
--- /dev/null
+++ b/qemu/roms/u-boot/board/quad100hd/nand.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/ppc4xx-gpio.h>
+#include <asm/io.h>
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd,
+				int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpio_write_bit(CONFIG_SYS_NAND_CLE, !!(ctrl & NAND_CLE));
+		gpio_write_bit(CONFIG_SYS_NAND_ALE, !!(ctrl & NAND_ALE));
+		gpio_write_bit(CONFIG_SYS_NAND_CE, !(ctrl & NAND_NCE));
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+	return gpio_read_in_bit(CONFIG_SYS_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+	/* Set address of hardware control function */
+	nand->cmd_ctrl = quad100hd_hwcontrol;
+	nand->dev_ready = quad100hd_nand_ready;
+	nand->ecc.mode = NAND_ECC_SOFT;
+	/* 15 us command delay time */
+	nand->chip_delay =  20;
+
+	/* Return happy */
+	return 0;
+}
+#endif /* CONFIG_CMD_NAND */