1 files changed, 59 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/gdsys/gdppc440etx/init.S b/qemu/roms/u-boot/board/gdsys/gdppc440etx/init.S
new file mode 100644
index 000000000..2db84b59a
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/gdppc440etx/init.S
@@ -0,0 +1,59 @@
+/*
+* (C) Copyright 2008
+* Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+*
+* based on board/amcc/yosemite/init.S
+* original Copyright not specified there
+ * SPDX-License-Identifier:	GPL-2.0+
+*/
+
+#include <asm-offsets.h>
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+#include <asm/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+
+    /*
+     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use
+     * the speed up boot process. It is patched after relocation to enable SA_I
+     */
+    tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR,
+	0, AC_RWX | SA_G/*|SA_I*/)
+
+    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+    tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR,
+	0, AC_RWX | SA_G )
+
+    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE,
+	0, AC_RWX | SA_IG )
+    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE,
+	0, AC_RW | SA_IG )
+
+    /* PCI */
+    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE,
+	0, AC_RW | SA_IG )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1,
+	0, AC_RW | SA_IG )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2,
+	0, AC_RW | SA_IG )
+    tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3,
+	0, AC_RW | SA_IG )
+
+    tlbtab_end