diff options
Diffstat (limited to 'qemu/roms/u-boot/board/gdsys/405ep/io.c')
| -rw-r--r-- | qemu/roms/u-boot/board/gdsys/405ep/io.c | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/gdsys/405ep/io.c b/qemu/roms/u-boot/board/gdsys/405ep/io.c new file mode 100644 index 000000000..03d796cdb --- /dev/null +++ b/qemu/roms/u-boot/board/gdsys/405ep/io.c @@ -0,0 +1,214 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/ppc4xx-gpio.h> + +#include <dtt.h> +#include <miiphy.h> + +#include "405ep.h" +#include <gdsys_fpga.h> + +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) + +#define PHYREG_CONTROL 0 +#define PHYREG_PAGE_ADDRESS 22 +#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 +#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26 + +enum { + UNITTYPE_CCD_SWITCH = 1, +}; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, + HWVER_121 = 2, + HWVER_122 = 3, +}; + +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + +int misc_init_r(void) +{ + /* startup fans */ + dtt_init(); + + return 0; +} + +int configure_gbit_phy(unsigned char addr) +{ + unsigned short value; + + /* select page 2 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0002)) + goto err_out; + /* disable SGMII autonegotiation */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a)) + goto err_out; + /* select page 0 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0000)) + goto err_out; + /* switch from powerdown to normal operation */ + if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value)) + goto err_out; + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004)) + goto err_out; + /* reset phy so settings take effect */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_CONTROL, 0x9140)) + goto err_out; + + return 0; + +err_out: + printf("Error writing to the PHY addr=%02x\n", addr); + return -1; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: CATCenter Io"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void print_fpga_info(void) +{ + u16 versions; + u16 fpga_version; + u16 fpga_features; + unsigned unit_type; + unsigned hardware_version; + unsigned feature_channels; + unsigned feature_expansion; + + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_channels = fpga_features & 0x007f; + feature_expansion = fpga_features & (1<<15); + + puts("FPGA: "); + + switch (unit_type) { + case UNITTYPE_CCD_SWITCH: + printf("CCD-Switch"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10\n"); + break; + + case HWVER_121: + printf(" HW-Ver 1.21\n"); + break; + + case HWVER_122: + printf(" HW-Ver 1.22\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d channel(s)", feature_channels); + + printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); +} + +/* + * setup Gbit PHYs + */ +int last_stage_init(void) +{ + unsigned int k; + + print_fpga_info(); + + miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME, + bb_miiphy_read, bb_miiphy_write); + + for (k = 0; k < 32; ++k) + configure_gbit_phy(k); + + /* take fpga serdes blocks out of reset */ + FPGA_SET_REG(0, quad_serdes_reset, 0); + + return 0; +} + +void gd405ep_init(void) +{ +} + +void gd405ep_set_fpga_reset(unsigned state) +{ + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } +} + +void gd405ep_setup_hw(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); +} + +int gd405ep_get_fpga_done(unsigned fpga) +{ + return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); +} |