diff options
Diffstat (limited to 'qemu/roms/u-boot/board/freescale/mpc8569mds/mpc8569mds.c')
| -rw-r--r-- | qemu/roms/u-boot/board/freescale/mpc8569mds/mpc8569mds.c | 583 |
1 files changed, 0 insertions, 583 deletions
diff --git a/qemu/roms/u-boot/board/freescale/mpc8569mds/mpc8569mds.c b/qemu/roms/u-boot/board/freescale/mpc8569mds/mpc8569mds.c deleted file mode 100644 index cb55e1c98..000000000 --- a/qemu/roms/u-boot/board/freescale/mpc8569mds/mpc8569mds.c +++ /dev/null @@ -1,583 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor. - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <hwconfig.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include <ioports.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_esdhc.h> -#include <phy.h> - -#include "bcsr.h" -#if defined(CONFIG_PQ_MDS_PIB) -#include "../common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* QE_MUX_MDC */ - {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ - - /* QE_MUX_MDIO */ - {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */ - -#if defined(CONFIG_SYS_UCC_RGMII_MODE) - /* UCC_1_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */ - {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ - {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */ - {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */ - - /* UCC_2_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */ - {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */ - {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */ - {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */ - - /* UCC_3_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */ - {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */ - {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */ - {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */ - - /* UCC_4_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */ - {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */ - {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ - {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */ - {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */ - -#elif defined(CONFIG_SYS_UCC_RMII_MODE) - /* UCC_1_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - - /* UCC_2_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - - /* UCC_3_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - - /* UCC_4_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ -#endif - - /* UART1 is muxed with QE PortF bit [9-12].*/ - {5, 12, 2, 0, 3}, /* UART1_SIN */ - {5, 9, 1, 0, 3}, /* UART1_SOUT */ - {5, 10, 2, 0, 3}, /* UART1_CTS_B */ - {5, 11, 1, 0, 2}, /* UART1_RTS_B */ - - /* QE UART */ - {0, 19, 1, 0, 2}, /* QEUART_TX */ - {1, 17, 2, 0, 3}, /* QEUART_RX */ - {0, 25, 1, 0, 1}, /* QEUART_RTS */ - {1, 23, 2, 0, 1}, /* QEUART_CTS */ - - /* QE USB */ - {5, 3, 1, 0, 1}, /* USB_OE */ - {5, 4, 1, 0, 2}, /* USB_TP */ - {5, 5, 1, 0, 2}, /* USB_TN */ - {5, 6, 2, 0, 2}, /* USB_RP */ - {5, 7, 2, 0, 1}, /* USB_RX */ - {5, 8, 2, 0, 1}, /* USB_RN */ - {2, 4, 2, 0, 2}, /* CLK5 */ - - /* SPI Flash, M25P40 */ - {4, 27, 3, 0, 1}, /* SPI_MOSI */ - {4, 28, 3, 0, 1}, /* SPI_MISO */ - {4, 29, 3, 0, 1}, /* SPI_CLK */ - {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */ - - {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ -}; - -void local_bus_init(void); - -int board_early_init_f (void) -{ - /* - * Initialize local bus. - */ - local_bus_init (); - - enable_8569mds_flash_write(); - -#ifdef CONFIG_QE - enable_8569mds_qe_uec(); -#endif - -#if CONFIG_SYS_I2C2_OFFSET - /* Enable I2C2 signals instead of SD signals */ - volatile struct ccsr_gur *gur; - gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000); - gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK; - gur->plppar1 |= PLPPAR1_I2C2_VAL; - gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK; - gur->plpdir1 |= PLPDIR1_I2C2_VAL; - - disable_8569mds_brd_eeprom_write_protect(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_NAND_BASE; - const u8 flash_esel = 0; - - /* - * Remap Boot flash to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */ - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, /* ts, esel */ - BOOKE_PAGESZ_64M, 1); /* tsize, iprot */ - - return 0; -} - -int checkboard (void) -{ - printf ("Board: 8569 MDS\n"); - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); - out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); - out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE); - out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2); - out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL); - out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); - out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); - out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); - out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); - out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); - out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); -#if defined (CONFIG_DDR_ECC) - out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN); - out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS); - out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE); -#endif - udelay(500); - - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { - udelay(1000); - } - debug("DDR: memory initialized\n\n"); - udelay(500); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif - -/* - * Initialize Local Bus - */ -void -local_bus_init(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - uint clkdiv; - sys_info_t sysinfo; - - get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - - out_be32(&gur->lbiuiplldcr1, 0x00078080); - if (clkdiv == 16) - out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); - else if (clkdiv == 8) - out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); - else if (clkdiv == 4) - out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); - - out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000); -} - -static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias) -{ - const char *status = "disabled"; - int off; - int err; - - off = fdt_path_offset(blob, alias); - if (off < 0) { - printf("WARNING: could not find %s alias: %s.\n", alias, - fdt_strerror(off)); - return; - } - - err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); - if (err) { - printf("WARNING: could not set status for serial0: %s.\n", - fdt_strerror(err)); - return; - } -} - -/* - * Because of an erratum in prototype boards it is impossible to use eSDHC - * without disabling UART0 (which makes it quite easy to 'brick' the board - * by simply issung 'setenv hwconfig esdhc', and not able to interact with - * U-Boot anylonger). - * - * So, but default we assume that the board is a prototype, which is a most - * safe assumption. There is no way to determine board revision from a - * register, so we use hwconfig. - */ - -static int prototype_board(void) -{ - if (hwconfig_subarg("board", "rev", NULL)) - return hwconfig_subarg_cmp("board", "rev", "prototype"); - return 1; -} - -static int esdhc_disables_uart0(void) -{ - return prototype_board() || - hwconfig_subarg_cmp("esdhc", "mode", "4-bits"); -} - -static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - const char *devtype = "serial"; - const char *compat = "ucc_uart"; - const char *clk = "brg9"; - u32 portnum = 0; - int off = -1; - - if (!hwconfig("qe_uart")) - return; - - if (hwconfig("esdhc") && esdhc_disables_uart0()) { - printf("QE UART: won't enable with esdhc.\n"); - return; - } - - fdt_board_disable_serial(blob, bd, "serial1"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "ucc_geth"); - if (off < 0) { - printf("WARNING: unable to fixup device tree for " - "QE UART\n"); - return; - } - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2)) - continue; - break; - } - - fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1); - fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1); - fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum)); - - setbits_8(&bcsr[15], BCSR15_QEUART_EN); -} - -#ifdef CONFIG_FSL_ESDHC - -int board_mmc_init(bd_t *bd) -{ - struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - u8 bcsr6 = BCSR6_SD_CARD_1BIT; - - if (!hwconfig("esdhc")) - return 0; - - printf("Enabling eSDHC...\n" - " For eSDHC to function, I2C2 "); - if (esdhc_disables_uart0()) { - printf("and UART0 should be disabled.\n"); - printf(" Redirecting stderr, stdout and stdin to UART1...\n"); - console_assign(stderr, "eserial1"); - console_assign(stdout, "eserial1"); - console_assign(stdin, "eserial1"); - printf("Switched to UART1 (initial log has been printed to " - "UART0).\n"); - - clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK, - PLPPAR1_ESDHC_4BITS_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK, - PLPDIR1_ESDHC_4BITS_VAL); - bcsr6 |= BCSR6_SD_CARD_4BITS; - } else { - printf("should be disabled.\n"); - } - - /* Assign I2C2 signals to eSDHC. */ - clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK, - PLPPAR1_ESDHC_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK, - PLPDIR1_ESDHC_VAL); - - /* Mux I2C2 (and optionally UART0) signals to eSDHC. */ - setbits_8(&bcsr[6], bcsr6); - - return fsl_esdhc_mmc_init(bd); -} - -static void fdt_board_fixup_esdhc(void *blob, bd_t *bd) -{ - const char *status = "disabled"; - int off = -1; - - if (!hwconfig("esdhc")) - return; - - if (esdhc_disables_uart0()) - fdt_board_disable_serial(blob, bd, "serial0"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c"); - if (off < 0) - break; - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx)) - continue; - - if (*idx == 1) { - fdt_setprop(blob, off, "status", status, - strlen(status) + 1); - break; - } - } - - if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) { - off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc"); - if (off < 0) { - printf("WARNING: could not find esdhc node\n"); - return; - } - fdt_delprop(blob, off, "sdhci,1-bit-only"); - } -} -#else -static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {} -#endif - -static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - - if (hwconfig_subarg_cmp("qe_usb", "speed", "low")) - clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - else - setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - - if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) { - clrbits_8(&bcsr[17], BCSR17_USBVCC); - clrbits_8(&bcsr[17], BCSR17_USBMODE); - do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode", - "peripheral", sizeof("peripheral"), 1); - } else { - setbits_8(&bcsr[17], BCSR17_USBVCC); - setbits_8(&bcsr[17], BCSR17_USBMODE); - } - - clrbits_8(&bcsr[17], BCSR17_nUSBEN); -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ -#if defined(CONFIG_PQ_MDS_PIB) - pib_init(); -#endif - - fsl_pcie_init_board(0); -} -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_SYS_UCC_RMII_MODE) - int nodeoff, off, err; - unsigned int val; - const u32 *ph; - const u32 *index; - - /* fixup device tree for supporting rmii mode */ - nodeoff = -1; - while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff, - "ucc_geth")) >= 0) { - err = fdt_setprop_string(blob, nodeoff, "tx-clock-name", - "clk16"); - if (err < 0) { - printf("WARNING: could not set tx-clock-name %s.\n", - fdt_strerror(err)); - break; - } - - err = fdt_fixup_phy_connection(blob, nodeoff, - PHY_INTERFACE_MODE_RMII); - - if (err < 0) { - printf("WARNING: could not set phy-connection-type " - "%s.\n", fdt_strerror(err)); - break; - } - - index = fdt_getprop(blob, nodeoff, "cell-index", 0); - if (index == NULL) { - printf("WARNING: could not get cell-index of ucc\n"); - break; - } - - ph = fdt_getprop(blob, nodeoff, "phy-handle", 0); - if (ph == NULL) { - printf("WARNING: could not get phy-handle of ucc\n"); - break; - } - - off = fdt_node_offset_by_phandle(blob, *ph); - if (off < 0) { - printf("WARNING: could not get phy node %s.\n", - fdt_strerror(err)); - break; - } - - val = 0x7 + *index; /* RMII phy address starts from 0x8 */ - - err = fdt_setprop(blob, off, "reg", &val, sizeof(u32)); - if (err < 0) { - printf("WARNING: could not set reg for phy-handle " - "%s.\n", fdt_strerror(err)); - break; - } - } -#endif - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - - fdt_board_fixup_esdhc(blob, bd); - fdt_board_fixup_qe_uart(blob, bd); - fdt_board_fixup_qe_usb(blob, bd); -} -#endif |