diff options
Diffstat (limited to 'qemu/roms/u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c')
| -rw-r--r-- | qemu/roms/u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/qemu/roms/u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c b/qemu/roms/u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c deleted file mode 100644 index 3dce3623a..000000000 --- a/qemu/roms/u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. - * - * Michael Barkowski <michael.barkowski@freescale.com> - * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <common.h> -#include <ioports.h> -#include <mpc83xx.h> -#include <i2c.h> -#include <miiphy.h> -#include <command.h> -#include <libfdt.h> -#if defined(CONFIG_PCI) -#include <pci.h> -#endif -#include <asm/mmu.h> - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* UCC3 */ - {1, 0, 1, 0, 1}, /* TxD0 */ - {1, 1, 1, 0, 1}, /* TxD1 */ - {1, 2, 1, 0, 1}, /* TxD2 */ - {1, 3, 1, 0, 1}, /* TxD3 */ - {1, 9, 1, 0, 1}, /* TxER */ - {1, 12, 1, 0, 1}, /* TxEN */ - {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ - - {1, 4, 2, 0, 1}, /* RxD0 */ - {1, 5, 2, 0, 1}, /* RxD1 */ - {1, 6, 2, 0, 1}, /* RxD2 */ - {1, 7, 2, 0, 1}, /* RxD3 */ - {1, 8, 2, 0, 1}, /* RxER */ - {1, 10, 2, 0, 1}, /* RxDV */ - {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ - {1, 11, 2, 0, 1}, /* COL */ - {1, 13, 2, 0, 1}, /* CRS */ - - /* UCC2 */ - {0, 18, 1, 0, 1}, /* TxD0 */ - {0, 19, 1, 0, 1}, /* TxD1 */ - {0, 20, 1, 0, 1}, /* TxD2 */ - {0, 21, 1, 0, 1}, /* TxD3 */ - {0, 27, 1, 0, 1}, /* TxER */ - {0, 30, 1, 0, 1}, /* TxEN */ - {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */ - - {0, 22, 2, 0, 1}, /* RxD0 */ - {0, 23, 2, 0, 1}, /* RxD1 */ - {0, 24, 2, 0, 1}, /* RxD2 */ - {0, 25, 2, 0, 1}, /* RxD3 */ - {0, 26, 1, 0, 1}, /* RxER */ - {0, 28, 2, 0, 1}, /* Rx_DV */ - {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */ - {0, 29, 2, 0, 1}, /* COL */ - {0, 31, 2, 0, 1}, /* CRS */ - - {3, 4, 3, 0, 2}, /* MDIO */ - {3, 5, 1, 0, 2}, /* MDC */ - - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - -int fixed_sdram(void); - -phys_size_t initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; - - msize = fixed_sdram(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CONFIG_SYS_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; - im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; - __asm__ __volatile__ ("sync"); - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - __asm__ __volatile__ ("sync"); - return msize; -} - -int checkboard(void) -{ - puts("Board: Freescale MPC8323ERDB\n"); - return 0; -} - -static struct pci_region pci_regions[] = { - { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, - { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO - } -}; - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci_regions }; - - /* Enable all 3 PCI_CLK_OUTPUTs. */ - clk->occr |= 0xe0000000; - - /* Configure PCI Local Access Windows */ - pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - - pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - - mpc83xx_pci_init(1, reg); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif - -#if defined(CONFIG_SYS_I2C_MAC_OFFSET) -int mac_read_from_eeprom(void) -{ - uchar buf[28]; - char str[18]; - int i = 0; - unsigned int crc = 0; - unsigned char enetvar[32]; - - /* Read MAC addresses from EEPROM */ - if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) { - printf("\nEEPROM @ 0x%02x read FAILED!!!\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - } else { - uint32_t crc_buf; - - memcpy(&crc_buf, &buf[24], sizeof(uint32_t)); - - if (crc32(crc, buf, 24) == crc_buf) { - printf("Reading MAC from EEPROM\n"); - for (i = 0; i < 4; i++) { - if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) { - sprintf(str, - "%02X:%02X:%02X:%02X:%02X:%02X", - buf[i * 6], buf[i * 6 + 1], - buf[i * 6 + 2], buf[i * 6 + 3], - buf[i * 6 + 4], buf[i * 6 + 5]); - sprintf((char *)enetvar, - i ? "eth%daddr" : "ethaddr", i); - setenv((char *)enetvar, str); - } - } - } - } - return 0; -} -#endif /* CONFIG_I2C_MAC_OFFSET */ |