summaryrefslogtreecommitdiffstats
path: root/qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c')
-rw-r--r--qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c1174
1 files changed, 1174 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c b/qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c
new file mode 100644
index 000000000..b2d537814
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/b4860qds/b4860qds.c
@@ -0,0 +1,1174 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "../common/idt8t49n222a_serdes_clk.h"
+#include "../common/zm7300.h"
+#include "b4860qds.h"
+#include "b4860qds_qixis.h"
+#include "b4860qds_crossbar_con.h"
+
+#define CLK_MUX_SEL_MASK 0x4
+#define ETH_PHY_CLK_OUT 0x4
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ char buf[64];
+ u8 sw;
+ struct cpu_type *cpu = gd->arch.cpu;
+ static const char *const freq[] = {"100", "125", "156.25", "161.13",
+ "122.88", "122.88", "122.88"};
+ int clock;
+
+ printf("Board: %sQDS, ", cpu->name);
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
+ QIXIS_READ(id), QIXIS_READ(arch));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw >= 0x8 && sw <= 0xE)
+ puts("NAND\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ printf("FPGA: v%d (%s), build %d",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+ /* the timestamp string contains "\n" at the end */
+ printf(" on %s", qixis_read_time(buf));
+
+ /*
+ * Display the actual SERDES reference clocks as configured by the
+ * dip switches on the board. Note that the SWx registers could
+ * technically be set to force the reference clocks to match the
+ * values that the SERDES expects (or vice versa). For now, however,
+ * we just display both values and hope the user notices when they
+ * don't match.
+ */
+ puts("SERDES Reference Clocks: ");
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = (sw >> 5) & 7;
+ printf("Bank1=%sMHz ", freq[clock]);
+ sw = QIXIS_READ(brdcfg[4]);
+ clock = (sw >> 6) & 3;
+ printf("Bank2=%sMHz\n", freq[clock]);
+
+ return 0;
+}
+
+int select_i2c_ch_pca(u8 ch)
+{
+ int ret;
+
+ /* Selecting proper channel via PCA*/
+ ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1);
+ if (ret) {
+ printf("PCA: failed to select proper channel.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * read_voltage from sensor on I2C bus
+ * We use average of 4 readings, waiting for 532us befor another reading
+ */
+#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
+#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
+
+static inline int read_voltage(void)
+{
+ int i, ret, voltage_read = 0;
+ u16 vol_mon;
+
+ for (i = 0; i < NUM_READINGS; i++) {
+ ret = i2c_read(I2C_VOL_MONITOR_ADDR,
+ I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
+ if (ret) {
+ printf("VID: failed to read core voltage\n");
+ return ret;
+ }
+ if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
+ printf("VID: Core voltage sensor error\n");
+ return -1;
+ }
+ debug("VID: bus voltage reads 0x%04x\n", vol_mon);
+ /* LSB = 4mv */
+ voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
+ udelay(WAIT_FOR_ADC);
+ }
+ /* calculate the average */
+ voltage_read /= NUM_READINGS;
+
+ return voltage_read;
+}
+
+static int adjust_vdd(ulong vdd_override)
+{
+ int re_enable = disable_interrupts();
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 fusesr;
+ u8 vid;
+ int vdd_target, vdd_last;
+ int existing_voltage, temp_voltage, voltage; /* all in 1/10 mV */
+ int ret;
+ unsigned int orig_i2c_speed;
+ unsigned long vdd_string_override;
+ char *vdd_string;
+ static const uint16_t vdd[32] = {
+ 0, /* unused */
+ 9875, /* 0.9875V */
+ 9750,
+ 9625,
+ 9500,
+ 9375,
+ 9250,
+ 9125,
+ 9000,
+ 8875,
+ 8750,
+ 8625,
+ 8500,
+ 8375,
+ 8250,
+ 8125,
+ 10000, /* 1.0000V */
+ 10125,
+ 10250,
+ 10375,
+ 10500,
+ 10625,
+ 10750,
+ 10875,
+ 11000,
+ 0, /* reserved */
+ };
+ struct vdd_drive {
+ u8 vid;
+ unsigned voltage;
+ };
+
+ ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ printf("VID: I2c failed to switch channel\n");
+ ret = -1;
+ goto exit;
+ }
+
+ /* get the voltage ID from fuse status register */
+ fusesr = in_be32(&gur->dcfg_fusesr);
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_VID_MASK;
+ if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+ }
+ vdd_target = vdd[vid];
+ debug("VID:Reading from from fuse,vid=%x vdd is %dmV\n",
+ vid, vdd_target/10);
+
+ /* check override variable for overriding VDD */
+ vdd_string = getenv("b4qds_vdd_mv");
+ if (vdd_override == 0 && vdd_string &&
+ !strict_strtoul(vdd_string, 10, &vdd_string_override))
+ vdd_override = vdd_string_override;
+ if (vdd_override >= 819 && vdd_override <= 1212) {
+ vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+ debug("VDD override is %lu\n", vdd_override);
+ } else if (vdd_override != 0) {
+ printf("Invalid value.\n");
+ }
+
+ if (vdd_target == 0) {
+ printf("VID: VID not used\n");
+ ret = 0;
+ goto exit;
+ }
+
+ /*
+ * Read voltage monitor to check real voltage.
+ * Voltage monitor LSB is 4mv.
+ */
+ vdd_last = read_voltage();
+ if (vdd_last < 0) {
+ printf("VID: abort VID adjustment\n");
+ ret = -1;
+ goto exit;
+ }
+
+ debug("VID: Core voltage is at %d mV\n", vdd_last);
+ ret = select_i2c_ch_pca(I2C_MUX_CH_DPM);
+ if (ret) {
+ printf("VID: I2c failed to switch channel to DPM\n");
+ ret = -1;
+ goto exit;
+ }
+
+ /* Round up to the value of step of Voltage regulator */
+ voltage = roundup(vdd_target, ZM_STEP);
+ debug("VID: rounded up voltage = %d\n", voltage);
+
+ /* lower the speed to 100kHz to access ZM7300 device */
+ debug("VID: Setting bus speed to 100KHz if not already set\n");
+ orig_i2c_speed = i2c_get_bus_speed();
+ if (orig_i2c_speed != 100000)
+ i2c_set_bus_speed(100000);
+
+ /* Read the existing level on board, if equal to requsted one,
+ no need to re-set */
+ existing_voltage = zm_read_voltage();
+
+ /* allowing the voltage difference of one step 0.0125V acceptable */
+ if ((existing_voltage >= voltage) &&
+ (existing_voltage < (voltage + ZM_STEP))) {
+ debug("VID: voltage already set as requested,returning\n");
+ ret = existing_voltage;
+ goto out;
+ }
+ debug("VID: Changing voltage for board from %dmV to %dmV\n",
+ existing_voltage/10, voltage/10);
+
+ if (zm_disable_wp() < 0) {
+ ret = -1;
+ goto out;
+ }
+ /* Change Voltage: the change is done through all the steps in the
+ way, to avoid reset to the board due to power good signal fail
+ in big voltage change gap jump.
+ */
+ if (existing_voltage > voltage) {
+ temp_voltage = existing_voltage - ZM_STEP;
+ while (temp_voltage >= voltage) {
+ ret = zm_write_voltage(temp_voltage);
+ if (ret == temp_voltage) {
+ temp_voltage -= ZM_STEP;
+ } else {
+ /* ZM7300 device failed to set
+ * the voltage */
+ printf
+ ("VID:Stepping down vol failed:%dmV\n",
+ temp_voltage/10);
+ ret = -1;
+ goto out;
+ }
+ }
+ } else {
+ temp_voltage = existing_voltage + ZM_STEP;
+ while (temp_voltage < (voltage + ZM_STEP)) {
+ ret = zm_write_voltage(temp_voltage);
+ if (ret == temp_voltage) {
+ temp_voltage += ZM_STEP;
+ } else {
+ /* ZM7300 device failed to set
+ * the voltage */
+ printf
+ ("VID:Stepping up vol failed:%dmV\n",
+ temp_voltage/10);
+ ret = -1;
+ goto out;
+ }
+ }
+ }
+
+ if (zm_enable_wp() < 0)
+ ret = -1;
+
+ /* restore the speed to 400kHz */
+out: debug("VID: Restore the I2C bus speed to %dKHz\n",
+ orig_i2c_speed/1000);
+ i2c_set_bus_speed(orig_i2c_speed);
+ if (ret < 0)
+ goto exit;
+
+ ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ printf("VID: I2c failed to switch channel\n");
+ ret = -1;
+ goto exit;
+ }
+ vdd_last = read_voltage();
+ select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+ if (vdd_last > 0)
+ printf("VID: Core voltage %d mV\n", vdd_last);
+ else
+ ret = -1;
+
+exit:
+ if (re_enable)
+ enable_interrupts();
+ return ret;
+}
+
+int configure_vsc3316_3308(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ unsigned int num_vsc16_con, num_vsc08_con;
+ u32 serdes1_prtcl, serdes2_prtcl;
+ int ret;
+
+ serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ if (!serdes1_prtcl) {
+ printf("SERDES1 is not enabled\n");
+ return 0;
+ }
+ serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+ serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ if (!serdes2_prtcl) {
+ printf("SERDES2 is not enabled\n");
+ return 0;
+ }
+ serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+ switch (serdes1_prtcl) {
+ case 0x29:
+ case 0x2a:
+ case 0x2C:
+ case 0x2D:
+ case 0x2E:
+ /*
+ * Configuration:
+ * SERDES: 1
+ * Lanes: A,B: SGMII
+ * Lanes: C,D,E,F,G,H: CPRI
+ */
+ debug("Configuring crossbar to use onboard SGMII PHYs:"
+ "srds_prctl:%x\n", serdes1_prtcl);
+ num_vsc16_con = NUM_CON_VSC3316;
+ /* Configure VSC3316 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+ if (!ret) {
+ ret = vsc3316_config(VSC3316_TX_ADDRESS,
+ vsc16_tx_4sfp_sgmii_12_56,
+ num_vsc16_con);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_RX_ADDRESS,
+ vsc16_rx_4sfp_sgmii_12_56,
+ num_vsc16_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
+
+ case 0x02:
+ case 0x04:
+ case 0x05:
+ case 0x06:
+ case 0x08:
+ case 0x09:
+ case 0x0A:
+ case 0x0B:
+ case 0x0C:
+ case 0x30:
+ case 0x32:
+ case 0x33:
+ case 0x34:
+ case 0x39:
+ case 0x3A:
+ case 0x3C:
+ case 0x3D:
+ case 0x5C:
+ case 0x5D:
+ /*
+ * Configuration:
+ * SERDES: 1
+ * Lanes: A,B: AURORA
+ * Lanes: C,d: SGMII
+ * Lanes: E,F,G,H: CPRI
+ */
+ debug("Configuring crossbar for Aurora, SGMII 3 and 4,"
+ " and CPRI. srds_prctl:%x\n", serdes1_prtcl);
+ num_vsc16_con = NUM_CON_VSC3316;
+ /* Configure VSC3316 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+ if (!ret) {
+ ret = vsc3316_config(VSC3316_TX_ADDRESS,
+ vsc16_tx_sfp_sgmii_aurora,
+ num_vsc16_con);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_RX_ADDRESS,
+ vsc16_rx_sfp_sgmii_aurora,
+ num_vsc16_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
+
+#ifdef CONFIG_PPC_B4420
+ case 0x17:
+ case 0x18:
+ /*
+ * Configuration:
+ * SERDES: 1
+ * Lanes: A,B,C,D: SGMII
+ * Lanes: E,F,G,H: CPRI
+ */
+ debug("Configuring crossbar to use onboard SGMII PHYs:"
+ "srds_prctl:%x\n", serdes1_prtcl);
+ num_vsc16_con = NUM_CON_VSC3316;
+ /* Configure VSC3316 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+ if (!ret) {
+ ret = vsc3316_config(VSC3316_TX_ADDRESS,
+ vsc16_tx_sgmii_lane_cd, num_vsc16_con);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_RX_ADDRESS,
+ vsc16_rx_sgmii_lane_cd, num_vsc16_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
+#endif
+
+ case 0x3E:
+ case 0x0D:
+ case 0x0E:
+ case 0x12:
+ num_vsc16_con = NUM_CON_VSC3316;
+ /* Configure VSC3316 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+ if (!ret) {
+ ret = vsc3316_config(VSC3316_TX_ADDRESS,
+ vsc16_tx_sfp, num_vsc16_con);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_RX_ADDRESS,
+ vsc16_rx_sfp, num_vsc16_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
+ default:
+ printf("WARNING:VSC crossbars programming not supported for:%x"
+ " SerDes1 Protocol.\n", serdes1_prtcl);
+ return -1;
+ }
+
+ switch (serdes2_prtcl) {
+ case 0x9E:
+ case 0x9A:
+ case 0x98:
+ case 0xb2:
+ case 0x49:
+ case 0x4E:
+ case 0x8D:
+ case 0x7A:
+ num_vsc08_con = NUM_CON_VSC3308;
+ /* Configure VSC3308 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3308);
+ if (!ret) {
+ ret = vsc3308_config(VSC3308_TX_ADDRESS,
+ vsc08_tx_amc, num_vsc08_con);
+ if (ret)
+ return ret;
+ ret = vsc3308_config(VSC3308_RX_ADDRESS,
+ vsc08_rx_amc, num_vsc08_con);
+ if (ret)
+ return ret;
+ } else {
+ return ret;
+ }
+ break;
+ default:
+ printf("WARNING:VSC crossbars programming not supported for: %x"
+ " SerDes2 Protocol.\n", serdes2_prtcl);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int calibrate_pll(serdes_corenet_t *srds_regs, int pll_num)
+{
+ u32 rst_err;
+
+ /* Steps For SerDes PLLs reset and reconfiguration
+ * or PLL power-up procedure
+ */
+ debug("CALIBRATE PLL:%d\n", pll_num);
+ clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+ SRDS_RSTCTL_SDRST_B);
+ udelay(10);
+ clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
+ udelay(10);
+ setbits_be32(&srds_regs->bank[pll_num].rstctl,
+ SRDS_RSTCTL_RST);
+ setbits_be32(&srds_regs->bank[pll_num].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+
+ udelay(20);
+
+ /* Check whether PLL has been locked or not */
+ rst_err = in_be32(&srds_regs->bank[pll_num].rstctl) &
+ SRDS_RSTCTL_RSTERR;
+ rst_err >>= SRDS_RSTCTL_RSTERR_SHIFT;
+ debug("RST_ERR value for PLL %d is: 0x%x:\n", pll_num, rst_err);
+ if (rst_err)
+ return rst_err;
+
+ return rst_err;
+}
+
+static int check_pll_locks(serdes_corenet_t *srds_regs, int pll_num)
+{
+ int ret = 0;
+ u32 fcap, dcbias, bcap, pllcr1, pllcr0;
+
+ if (calibrate_pll(srds_regs, pll_num)) {
+ /* STEP 1 */
+ /* Read fcap, dcbias and bcap value */
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OUT_EN);
+ fcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+ SRDS_PLLSR2_FCAP;
+ fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
+ bcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+ SRDS_PLLSR2_BCAP_EN;
+ bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
+ setbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OUT_EN);
+ dcbias = in_be32(&srds_regs->bank[pll_num].pllsr2) &
+ SRDS_PLLSR2_DCBIAS;
+ dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
+ debug("values of bcap:%x, fcap:%x and dcbias:%x\n",
+ bcap, fcap, dcbias);
+ if (fcap == 0 && bcap == 1) {
+ /* Step 3 */
+ clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_EN);
+ setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_OVD);
+ if (calibrate_pll(srds_regs, pll_num)) {
+ /*save the fcap, dcbias and bcap values*/
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OUT_EN);
+ fcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
+ & SRDS_PLLSR2_FCAP;
+ fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
+ bcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
+ & SRDS_PLLSR2_BCAP_EN;
+ bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
+ setbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OUT_EN);
+ dcbias = in_be32
+ (&srds_regs->bank[pll_num].pllsr2) &
+ SRDS_PLLSR2_DCBIAS;
+ dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
+
+ /* Step 4*/
+ clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+ setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BYP_CAL);
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_EN);
+ setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_OVD);
+ /* change the fcap and dcbias to the saved
+ * values from Step 3 */
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_PLL_FCAP);
+ pllcr1 = (in_be32
+ (&srds_regs->bank[pll_num].pllcr1)|
+ (fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
+ out_be32(&srds_regs->bank[pll_num].pllcr1,
+ pllcr1);
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OVRD);
+ pllcr0 = (in_be32
+ (&srds_regs->bank[pll_num].pllcr0)|
+ (dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
+ out_be32(&srds_regs->bank[pll_num].pllcr0,
+ pllcr0);
+ ret = calibrate_pll(srds_regs, pll_num);
+ if (ret)
+ return ret;
+ } else {
+ goto out;
+ }
+ } else { /* Step 5 */
+ clrbits_be32(&srds_regs->bank[pll_num].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+ udelay(10);
+ /* Change the fcap, dcbias, and bcap to the
+ * values from Step 1 */
+ setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BYP_CAL);
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_PLL_FCAP);
+ pllcr1 = (in_be32(&srds_regs->bank[pll_num].pllcr1)|
+ (fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
+ out_be32(&srds_regs->bank[pll_num].pllcr1,
+ pllcr1);
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
+ SRDS_PLLCR0_DCBIAS_OVRD);
+ pllcr0 = (in_be32(&srds_regs->bank[pll_num].pllcr0)|
+ (dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
+ out_be32(&srds_regs->bank[pll_num].pllcr0,
+ pllcr0);
+ clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_EN);
+ setbits_be32(&srds_regs->bank[pll_num].pllcr1,
+ SRDS_PLLCR1_BCAP_OVD);
+ ret = calibrate_pll(srds_regs, pll_num);
+ if (ret)
+ return ret;
+ }
+ }
+out:
+ return 0;
+}
+
+static int check_serdes_pll_locks(void)
+{
+ serdes_corenet_t *srds1_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ serdes_corenet_t *srds2_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+ int i, ret1, ret2;
+
+ debug("\nSerDes1 Lock check\n");
+ for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+ ret1 = check_pll_locks(srds1_regs, i);
+ if (ret1) {
+ printf("SerDes1, PLL:%d didnt lock\n", i);
+ return ret1;
+ }
+ }
+ debug("\nSerDes2 Lock check\n");
+ for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+ ret2 = check_pll_locks(srds2_regs, i);
+ if (ret2) {
+ printf("SerDes2, PLL:%d didnt lock\n", i);
+ return ret2;
+ }
+ }
+
+ return 0;
+}
+
+int config_serdes1_refclks(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ serdes_corenet_t *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ u32 serdes1_prtcl, lane;
+ unsigned int flag_sgmii_aurora_prtcl = 0;
+ int i;
+ int ret = 0;
+
+ serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ if (!serdes1_prtcl) {
+ printf("SERDES1 is not enabled\n");
+ return -1;
+ }
+ serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+ /* To prevent generation of reset request from SerDes
+ * while changing the refclks, By setting SRDS_RST_MSK bit,
+ * SerDes reset event cannot cause a reset request
+ */
+ setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+
+ /* Reconfigure IDT idt8t49n222a device for CPRI to work
+ * For this SerDes1's Refclk1 and refclk2 need to be set
+ * to 122.88MHz
+ */
+ switch (serdes1_prtcl) {
+ case 0x2A:
+ case 0x2C:
+ case 0x2D:
+ case 0x2E:
+ case 0x02:
+ case 0x04:
+ case 0x05:
+ case 0x06:
+ case 0x08:
+ case 0x09:
+ case 0x0A:
+ case 0x0B:
+ case 0x0C:
+ case 0x30:
+ case 0x32:
+ case 0x33:
+ case 0x34:
+ case 0x39:
+ case 0x3A:
+ case 0x3C:
+ case 0x3D:
+ case 0x5C:
+ case 0x5D:
+ debug("Configuring idt8t49n222a for CPRI SerDes clks:"
+ " for srds_prctl:%x\n", serdes1_prtcl);
+ ret = select_i2c_ch_pca(I2C_CH_IDT);
+ if (!ret) {
+ ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1,
+ SERDES_REFCLK_122_88,
+ SERDES_REFCLK_122_88, 0);
+ if (ret) {
+ printf("IDT8T49N222A configuration failed.\n");
+ goto out;
+ } else
+ debug("IDT8T49N222A configured.\n");
+ } else {
+ goto out;
+ }
+ select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+ /* Change SerDes1's Refclk1 to 125MHz for on board
+ * SGMIIs or Aurora to work
+ */
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl
+ (0, serdes1_prtcl, lane);
+ switch (lane_prtcl) {
+ case SGMII_FM1_DTSEC1:
+ case SGMII_FM1_DTSEC2:
+ case SGMII_FM1_DTSEC3:
+ case SGMII_FM1_DTSEC4:
+ case SGMII_FM1_DTSEC5:
+ case SGMII_FM1_DTSEC6:
+ case AURORA:
+ flag_sgmii_aurora_prtcl++;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (flag_sgmii_aurora_prtcl)
+ QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
+
+ /* Steps For SerDes PLLs reset and reconfiguration after
+ * changing SerDes's refclks
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+ debug("For PLL%d reset and reconfiguration after"
+ " changing refclks\n", i+1);
+ clrbits_be32(&srds_regs->bank[i].rstctl,
+ SRDS_RSTCTL_SDRST_B);
+ udelay(10);
+ clrbits_be32(&srds_regs->bank[i].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
+ udelay(10);
+ setbits_be32(&srds_regs->bank[i].rstctl,
+ SRDS_RSTCTL_RST);
+ setbits_be32(&srds_regs->bank[i].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+ }
+ break;
+ default:
+ printf("WARNING:IDT8T49N222A configuration not"
+ " supported for:%x SerDes1 Protocol.\n",
+ serdes1_prtcl);
+ }
+
+out:
+ /* Clearing SRDS_RST_MSK bit as now
+ * SerDes reset event can cause a reset request
+ */
+ clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+ return ret;
+}
+
+int config_serdes2_refclks(void)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ serdes_corenet_t *srds2_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+ u32 serdes2_prtcl;
+ int ret = 0;
+ int i;
+
+ serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ if (!serdes2_prtcl) {
+ debug("SERDES2 is not enabled\n");
+ return -ENODEV;
+ }
+ serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+ /* To prevent generation of reset request from SerDes
+ * while changing the refclks, By setting SRDS_RST_MSK bit,
+ * SerDes reset event cannot cause a reset request
+ */
+ setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+
+ /* Reconfigure IDT idt8t49n222a device for PCIe SATA to work
+ * For this SerDes2's Refclk1 need to be set to 100MHz
+ */
+ switch (serdes2_prtcl) {
+ case 0x9E:
+ case 0x9A:
+ case 0xb2:
+ debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
+ serdes2_prtcl);
+ ret = select_i2c_ch_pca(I2C_CH_IDT);
+ if (!ret) {
+ ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2,
+ SERDES_REFCLK_100,
+ SERDES_REFCLK_156_25, 0);
+ if (ret) {
+ printf("IDT8T49N222A configuration failed.\n");
+ goto out;
+ } else
+ debug("IDT8T49N222A configured.\n");
+ } else {
+ goto out;
+ }
+ select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+ /* Steps For SerDes PLLs reset and reconfiguration after
+ * changing SerDes's refclks
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
+ clrbits_be32(&srds2_regs->bank[i].rstctl,
+ SRDS_RSTCTL_SDRST_B);
+ udelay(10);
+ clrbits_be32(&srds2_regs->bank[i].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
+ udelay(10);
+ setbits_be32(&srds2_regs->bank[i].rstctl,
+ SRDS_RSTCTL_RST);
+ setbits_be32(&srds2_regs->bank[i].rstctl,
+ (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
+ | SRDS_RSTCTL_SDRST_B));
+
+ udelay(10);
+ }
+ break;
+ default:
+ printf("IDT configuration not supported for:%x S2 Protocol.\n",
+ serdes2_prtcl);
+ }
+
+out:
+ /* Clearing SRDS_RST_MSK bit as now
+ * SerDes reset event can cause a reset request
+ */
+ clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
+ return ret;
+}
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+ int ret;
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+ /*
+ * Adjust core voltage according to voltage ID
+ * This function changes I2C mux to channel 2.
+ */
+ if (adjust_vdd(0) < 0)
+ printf("Warning: Adjusting core voltage failed\n");
+
+ /* SerDes1 refclks need to be set again, as default clks
+ * are not suitable for CPRI and onboard SGMIIs to work
+ * simultaneously.
+ * This function will set SerDes1's Refclk1 and refclk2
+ * as per SerDes1 protocols
+ */
+ if (config_serdes1_refclks())
+ printf("SerDes1 Refclks couldn't set properly.\n");
+ else
+ printf("SerDes1 Refclks have been set.\n");
+
+ /* SerDes2 refclks need to be set again, as default clks
+ * are not suitable for PCIe SATA to work
+ * This function will set SerDes2's Refclk1 and refclk2
+ * for SerDes2 protocols having PCIe in them
+ * for PCIe SATA to work
+ */
+ ret = config_serdes2_refclks();
+ if (!ret)
+ printf("SerDes2 Refclks have been set.\n");
+ else if (ret == -ENODEV)
+ printf("SerDes disable, Refclks couldn't change.\n");
+ else
+ printf("SerDes2 Refclk reconfiguring failed.\n");
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_A006384) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A006475)
+ /* Rechecking the SerDes locks after all SerDes configurations
+ * are done, As SerDes PLLs may not lock reliably at 5 G VCO
+ * and at cold temperatures.
+ * Following sequence ensure the proper locking of SerDes PLLs.
+ */
+ if (SVR_MAJ(get_svr()) == 1) {
+ if (check_serdes_pll_locks())
+ printf("SerDes plls still not locked properly.\n");
+ else
+ printf("SerDes plls have been locked well.\n");
+ }
+#endif
+
+ /* Configure VSC3316 and VSC3308 crossbar switches */
+ if (configure_vsc3316_3308())
+ printf("VSC:failed to configure VSC3316/3308.\n");
+ else
+ printf("VSC:VSC3316/3308 successfully configured.\n");
+
+ select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((sysclk_conf & 0x0C) >> 2) {
+ case QIXIS_CLK_100:
+ return 100000000;
+ case QIXIS_CLK_125:
+ return 125000000;
+ case QIXIS_CLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (ddrclk_conf & 0x03) {
+ case QIXIS_CLK_100:
+ return 100000000;
+ case QIXIS_CLK_125:
+ return 125000000;
+ case QIXIS_CLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+static int serdes_refclock(u8 sw, u8 sdclk)
+{
+ unsigned int clock;
+ int ret = -1;
+ u8 brdcfg4;
+
+ if (sdclk == 1) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT)
+ return SRDS_PLLCR0_RFCK_SEL_125;
+ else
+ clock = (sw >> 5) & 7;
+ } else
+ clock = (sw >> 6) & 3;
+
+ switch (clock) {
+ case 0:
+ ret = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ ret = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ ret = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ case 3:
+ ret = SRDS_PLLCR0_RFCK_SEL_161_13;
+ break;
+ case 4:
+ case 5:
+ case 6:
+ ret = SRDS_PLLCR0_RFCK_SEL_122_88;
+ break;
+ default:
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
+#define NUM_SRDS_BANKS 2
+
+int misc_init_r(void)
+{
+ u8 sw;
+ serdes_corenet_t *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ u32 actual[NUM_SRDS_BANKS];
+ unsigned int i;
+ int clock;
+
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = serdes_refclock(sw, 1);
+ if (clock >= 0)
+ actual[0] = clock;
+ else
+ printf("Warning: SDREFCLK1 switch setting is unsupported\n");
+
+ sw = QIXIS_READ(brdcfg[4]);
+ clock = serdes_refclock(sw, 2);
+ if (clock >= 0)
+ actual[1] = clock;
+ else
+ printf("Warning: SDREFCLK2 switch setting unsupported\n");
+
+ for (i = 0; i < NUM_SRDS_BANKS; i++) {
+ u32 pllcr0 = srds_regs->bank[i].pllcr0;
+ u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+ if (expected != actual[i]) {
+ printf("Warning: SERDES bank %u expects reference clock"
+ " %sMHz, but actual is %sMHz\n", i + 1,
+ serdes_clock_to_string(expected),
+ serdes_clock_to_string(actual[i]));
+ }
+ }
+
+ return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+ pci_of_setup(blob, bd);
+#endif
+
+ fdt_fixup_liodn(blob);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+}
+
+/*
+ * Dump board switch settings.
+ * The bits that cannot be read/sampled via some FPGA or some
+ * registers, they will be displayed as
+ * underscore in binary format. mask[] has those bits.
+ * Some bits are calculated differently than the actual switches
+ * if booting with overriding by FPGA.
+ */
+void qixis_dump_switch(void)
+{
+ int i;
+ u8 sw[5];
+
+ /*
+ * Any bit with 1 means that bit cannot be reverse engineered.
+ * It will be displayed as _ in binary format.
+ */
+ static const u8 mask[] = {0x07, 0, 0, 0xff, 0};
+ char buf[10];
+ u8 brdcfg[16], dutcfg[16];
+
+ for (i = 0; i < 16; i++) {
+ brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+ dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+ }
+
+ sw[0] = ((brdcfg[0] & 0x0f) << 4) | \
+ (brdcfg[9] & 0x08);
+ sw[1] = ((dutcfg[1] & 0x01) << 7) | \
+ ((dutcfg[2] & 0x07) << 4) | \
+ ((dutcfg[6] & 0x10) >> 1) | \
+ ((dutcfg[6] & 0x80) >> 5) | \
+ ((dutcfg[1] & 0x40) >> 5) | \
+ (dutcfg[6] & 0x01);
+ sw[2] = dutcfg[0];
+ sw[3] = 0;
+ sw[4] = ((brdcfg[1] & 0x30) << 2) | \
+ ((brdcfg[1] & 0xc0) >> 2) | \
+ (brdcfg[1] & 0x0f);
+
+ puts("DIP switch settings:\n");
+ for (i = 0; i < 5; i++) {
+ printf("SW%d = 0b%s (0x%02x)\n",
+ i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+ }
+}