diff options
Diffstat (limited to 'qemu/roms/u-boot/board/enbw')
| -rw-r--r-- | qemu/roms/u-boot/board/enbw/enbw_cmc/Makefile | 10 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/enbw/enbw_cmc/enbw_cmc.c | 893 |
2 files changed, 903 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/enbw/enbw_cmc/Makefile b/qemu/roms/u-boot/board/enbw/enbw_cmc/Makefile new file mode 100644 index 000000000..054d6e7c8 --- /dev/null +++ b/qemu/roms/u-boot/board/enbw/enbw_cmc/Makefile @@ -0,0 +1,10 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := enbw_cmc.o diff --git a/qemu/roms/u-boot/board/enbw/enbw_cmc/enbw_cmc.c b/qemu/roms/u-boot/board/enbw/enbw_cmc/enbw_cmc.c new file mode 100644 index 000000000..39efe20bf --- /dev/null +++ b/qemu/roms/u-boot/board/enbw/enbw_cmc/enbw_cmc.c @@ -0,0 +1,893 @@ +/* + * (C) Copyright 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on da830evm.c. Original Copyrights follow: + * + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <environment.h> +#include <hwconfig.h> +#include <i2c.h> +#include <malloc.h> +#include <miiphy.h> +#include <mmc.h> +#include <net.h> +#include <netdev.h> +#include <spi.h> +#include <linux/ctype.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/da850_lowlevel.h> +#include <asm/arch/davinci_misc.h> +#include <asm/arch/emif_defs.h> +#include <asm/arch/emac_defs.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sdmmc_defs.h> +#include <asm/arch/timer_defs.h> +#include <asm/davinci_rtc.h> + +DECLARE_GLOBAL_DATA_PTR; + +const struct lpsc_resource lpsc[] = { + { DAVINCI_LPSC_AEMIF }, + { DAVINCI_LPSC_SPI1 }, + { DAVINCI_LPSC_ARM_RAM_ROM }, + { DAVINCI_LPSC_UART0 }, + { DAVINCI_LPSC_EMAC }, + { DAVINCI_LPSC_UART0 }, + { DAVINCI_LPSC_GPIO }, + { DAVINCI_LPSC_DDR_EMIF }, + { DAVINCI_LPSC_UART1 }, + { DAVINCI_LPSC_UART2 }, + { DAVINCI_LPSC_MMC_SD1 }, + { DAVINCI_LPSC_USB20 }, + { DAVINCI_LPSC_USB11 }, +}; + +const int lpsc_size = ARRAY_SIZE(lpsc); + +static const struct pinmux_config enbw_pins[] = { + { pinmux(0), 8, 0 }, + { pinmux(0), 8, 1 }, + { pinmux(0), 8, 2 }, + { pinmux(0), 8, 3 }, + { pinmux(0), 8, 4 }, + { pinmux(0), 8, 5 }, + { pinmux(1), 4, 0 }, + { pinmux(1), 8, 1 }, + { pinmux(1), 8, 2 }, + { pinmux(1), 8, 3 }, + { pinmux(1), 8, 4 }, + { pinmux(1), 8, 5 }, + { pinmux(1), 8, 6 }, + { pinmux(1), 4, 7 }, + { pinmux(2), 8, 0 }, + { pinmux(5), 1, 0 }, + { pinmux(5), 1, 3 }, + { pinmux(5), 1, 7 }, + { pinmux(5), 1, 5 }, + { pinmux(5), 1, 4 }, + { pinmux(5), 1, 3 }, + { pinmux(5), 1, 2 }, + { pinmux(5), 1, 1 }, + { pinmux(5), 1, 0 }, + { pinmux(6), 8, 0 }, + { pinmux(6), 8, 1 }, + { pinmux(6), 8, 2 }, + { pinmux(6), 8, 3 }, + { pinmux(6), 8, 4 }, + { pinmux(6), 8, 5 }, + { pinmux(6), 1, 7 }, + { pinmux(7), 8, 2 }, + { pinmux(7), 1, 3 }, + { pinmux(7), 8, 6 }, + { pinmux(7), 1, 7 }, + { pinmux(13), 8, 2 }, + { pinmux(13), 8, 3 }, + { pinmux(13), 8, 4 }, + { pinmux(13), 8, 5 }, + { pinmux(13), 8, 6 }, + { pinmux(13), 8, 7 }, + { pinmux(14), 8, 0 }, + { pinmux(14), 8, 1 }, + { pinmux(16), 8, 1 }, + { pinmux(16), 8, 2 }, + { pinmux(16), 8, 3 }, + { pinmux(16), 8, 4 }, + { pinmux(16), 8, 5 }, + { pinmux(16), 8, 6 }, + { pinmux(16), 8, 7 }, + { pinmux(17), 1, 0 }, + { pinmux(17), 1, 1 }, + { pinmux(17), 1, 2 }, + { pinmux(17), 8, 3 }, + { pinmux(17), 8, 4 }, + { pinmux(17), 8, 5 }, + { pinmux(17), 8, 6 }, + { pinmux(17), 8, 7 }, + { pinmux(18), 8, 0 }, + { pinmux(18), 8, 1 }, + { pinmux(18), 2, 2 }, + { pinmux(18), 2, 3 }, + { pinmux(18), 2, 4 }, + { pinmux(18), 8, 6 }, + { pinmux(18), 8, 7 }, + { pinmux(19), 8, 0 }, + { pinmux(19), 2, 1 }, + { pinmux(19), 2, 2 }, + { pinmux(19), 2, 3 }, + { pinmux(19), 2, 4 }, + { pinmux(19), 8, 5 }, + { pinmux(19), 8, 6 }, +}; + +const struct pinmux_resource pinmuxes[] = { + PINMUX_ITEM(emac_pins_mii), + PINMUX_ITEM(emac_pins_mdio), + PINMUX_ITEM(i2c0_pins), + PINMUX_ITEM(emifa_pins_cs2), + PINMUX_ITEM(emifa_pins_cs3), + PINMUX_ITEM(emifa_pins_cs4), + PINMUX_ITEM(emifa_pins_nand), + PINMUX_ITEM(emifa_pins_nor), + PINMUX_ITEM(spi1_pins_base), + PINMUX_ITEM(spi1_pins_scs0), + PINMUX_ITEM(uart1_pins_txrx), + PINMUX_ITEM(uart2_pins_txrx), + PINMUX_ITEM(uart2_pins_rtscts), + PINMUX_ITEM(enbw_pins), +}; + +const int pinmuxes_size = ARRAY_SIZE(pinmuxes); + +struct gpio_config { + char name[GPIO_NAME_SIZE]; + unsigned char bank; + unsigned char gpio; + unsigned char out; + unsigned char value; +}; + +static const struct gpio_config enbw_gpio_config_hut[] = { + { "RS485 enable", 8, 11, 1, 0 }, + { "RS485 iso", 8, 10, 1, 1 }, + { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, + { "W2HUT RS485 iso", 8, 8, 1, 1 }, +}; + +static const struct gpio_config enbw_gpio_config_w[] = { + { "RS485 enable", 8, 11, 1, 0 }, + { "RS485 iso", 8, 10, 1, 0 }, + { "W2HUT RS485 Rx ena", 8, 9, 1, 0 }, + { "W2HUT RS485 iso", 8, 8, 1, 0 }, +}; + +static const struct gpio_config enbw_gpio_config[] = { + { "LAN reset", 7, 15, 1, 1 }, + { "ena 11V PLC", 7, 14, 1, 0 }, + { "ena 1.5V PLC", 7, 13, 1, 0 }, + { "disable VBUS", 7, 12, 1, 1 }, + { "PLC reset", 6, 13, 1, 0 }, + { "LCM RS", 6, 12, 1, 0 }, + { "LCM R/W", 6, 11, 1, 0 }, + { "PLC pairing", 6, 10, 1, 1 }, + { "PLC MDIO CLK", 6, 9, 1, 0 }, + { "HK218", 6, 8, 1, 0 }, + { "HK218 Rx", 6, 1, 1, 1 }, + { "TPM reset", 6, 0, 1, 0 }, + { "Board-Type", 3, 9, 0, 0 }, + { "HW-ID0", 2, 7, 0, 0 }, + { "HW-ID1", 2, 6, 0, 0 }, + { "HW-ID2", 2, 3, 0, 0 }, + { "PV-IF RxD ena", 0, 15, 1, 1 }, + { "LED1", 1, 15, 1, 1 }, + { "LED2", 0, 1, 1, 1 }, + { "LED3", 0, 2, 1, 1 }, + { "LED4", 0, 3, 1, 1 }, + { "LED5", 0, 4, 1, 1 }, + { "LED6", 0, 5, 1, 0 }, + { "LED7", 0, 6, 1, 0 }, + { "LED8", 0, 14, 1, 0 }, + { "USER1", 0, 12, 0, 0 }, + { "USER2", 0, 13, 0, 0 }, +}; + +#define PHY_POWER 0x0800 + +static void enbw_cmc_switch(int port, int on) +{ + const char *devname; + unsigned char phyaddr = 3; + unsigned char reg = 0; + unsigned short data; + + if (port == 1) + phyaddr = 2; + + devname = miiphy_get_current_dev(); + if (!devname) { + printf("Error: no mii device\n"); + return; + } + if (miiphy_read(devname, phyaddr, reg, &data) != 0) { + printf("Error reading from the PHY addr=%02x reg=%02x\n", + phyaddr, reg); + return; + } + + if (on) + data &= ~PHY_POWER; + else + data |= PHY_POWER; + + if (miiphy_write(devname, phyaddr, reg, data) != 0) { + printf("Error writing to the PHY addr=%02x reg=%02x\n", + phyaddr, reg); + return; + } +} + +static int enbw_cmc_init_gpio(const struct gpio_config *conf, int sz) +{ + int i, ret; + + for (i = 0; i < sz; i++) { + int gpio = conf[i].bank * 16 + + conf[i].gpio; + + ret = gpio_request(gpio, conf[i].name); + if (ret) { + printf("%s: Could not get %s gpio\n", __func__, + conf[i].name); + return ret; + } + + if (conf[i].out) + gpio_direction_output(gpio, + conf[i].value); + else + gpio_direction_input(gpio); + } + + return 0; +} + +int board_init(void) +{ + int board_type, hw_id; + +#ifndef CONFIG_USE_IRQ + irq_init(); +#endif + /* address of boot parameters, not used as booting with DTT */ + gd->bd->bi_boot_params = 0; + + enbw_cmc_init_gpio(enbw_gpio_config, ARRAY_SIZE(enbw_gpio_config)); + + /* detect HW version */ + board_type = gpio_get_value(CONFIG_ENBW_CMC_BOARD_TYPE); + hw_id = gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT0) + + (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT1) << 1) + + (gpio_get_value(CONFIG_ENBW_CMC_HW_ID_BIT2) << 2); + printf("BOARD: CMC-%s hw id: %d\n", (board_type ? "w2" : "hut"), + hw_id); + if (board_type) + enbw_cmc_init_gpio(enbw_gpio_config_w, + ARRAY_SIZE(enbw_gpio_config_w)); + else + enbw_cmc_init_gpio(enbw_gpio_config_hut, + ARRAY_SIZE(enbw_gpio_config_hut)); + + /* setup the SUSPSRC for ARM to control emulation suspend */ + clrbits_le32(&davinci_syscfg_regs->suspsrc, + (DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2)); + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC + +#define KSZ_CMD_READ 0x03 +#define KSZ_CMD_WRITE 0x02 +#define KSZ_ID 0x95 + +static int enbw_cmc_switch_read(struct spi_slave *spi, u8 reg, u8 *val) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + int cmd_len; + u8 cmd[2]; + + cmd[0] = KSZ_CMD_READ; + cmd[1] = reg; + cmd_len = 2; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("Failed to send command (%zu bytes): %d\n", + cmd_len, ret); + return -EINVAL; + } + flags |= SPI_XFER_END; + *val = 0; + cmd_len = 1; + ret = spi_xfer(spi, cmd_len * 8, NULL, val, flags); + if (ret) { + debug("Failed to read (%zu bytes): %d\n", + cmd_len, ret); + return -EINVAL; + } + + return 0; +} + +static int enbw_cmc_switch_read_ident(struct spi_slave *spi) +{ + int ret; + u8 val; + + ret = enbw_cmc_switch_read(spi, 0, &val); + if (ret) { + debug("Failed to read\n"); + return -EINVAL; + } + + if (val != KSZ_ID) + return -EINVAL; + + return 0; +} + +static int enbw_cmc_switch_write(struct spi_slave *spi, unsigned long reg, + unsigned long val) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + int cmd_len; + u8 cmd[3]; + + cmd[0] = KSZ_CMD_WRITE; + cmd[1] = reg; + cmd[2] = val; + cmd_len = 3; + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("Failed to send command (%zu bytes): %d\n", + cmd_len, ret); + return -EINVAL; + } + + udelay(1000); + ret = enbw_cmc_switch_read(spi, reg, &cmd[0]); + if (ret) { + debug("Failed to read\n"); + return -EINVAL; + } + if (val != cmd[0]) + debug("warning: reg: %lx va: %x soll: %lx\n", + reg, cmd[0], val); + + return 0; +} + +static int enbw_cmc_eof(unsigned char *ptr) +{ + if (*ptr == 0xff) + return 1; + + return 0; +} + +static char *enbw_cmc_getnewline(char *ptr) +{ + while (*ptr != 0x0a) { + ptr++; + if (enbw_cmc_eof((unsigned char *)ptr)) + return NULL; + } + + ptr++; + return ptr; +} + +static char *enbw_cmc_getvalue(char *ptr, int *value) +{ + int end = 0; + + *value = -EINVAL; + + if (!isxdigit(*ptr)) + end = 1; + + while (end) { + if ((*ptr == '#') || (*ptr == ';')) { + ptr = enbw_cmc_getnewline(ptr); + return ptr; + } + if (ptr != NULL) { + if (isxdigit(*ptr)) { + end = 0; + } else if (*ptr == 0x0a) { + ptr++; + return ptr; + } else { + ptr++; + if (enbw_cmc_eof((unsigned char *)ptr)) + return NULL; + } + } else { + return NULL; + } + } + *value = (int)simple_strtoul((const char *)ptr, &ptr, 16); + ptr++; + return ptr; +} + +static struct spi_slave *enbw_cmc_init_spi(void) +{ + struct spi_slave *spi; + int ret; + + spi = spi_setup_slave(0, 0, 1000000, 0); + if (!spi) { + printf("Failed to set up slave\n"); + return NULL; + } + + ret = spi_claim_bus(spi); + if (ret) { + debug("Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + ret = enbw_cmc_switch_read_ident(spi); + if (ret) + goto err_read; + + return spi; +err_read: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +static int enbw_cmc_config_switch(unsigned long addr) +{ + struct spi_slave *spi; + char *ptr = (char *)addr; + int value, reg; + int ret = 0; + + debug("configure switch with file on addr: 0x%lx\n", addr); + + spi = enbw_cmc_init_spi(); + if (!spi) + return -EINVAL; + + while (ptr != NULL) { + ptr = enbw_cmc_getvalue(ptr, ®); + if (ptr != NULL) { + ptr = enbw_cmc_getvalue(ptr, &value); + if ((ptr != NULL) && (value >= 0)) + if (enbw_cmc_switch_write(spi, reg, value)) { + /* error writing to switch */ + ptr = NULL; + ret = -EINVAL; + } + } + } + + spi_release_bus(spi); + spi_free_slave(spi); + return ret; +} + +static int do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + unsigned long addr; + + if (argc < 2) + return cmd_usage(cmdtp); + + addr = simple_strtoul(argv[1], NULL, 16); + enbw_cmc_config_switch(addr); + + return 0; +} + +U_BOOT_CMD(switch, 3, 1, do_switch, + "switch addr", + "[addr]" +); + +/* + * Initializes on-board ethernet controllers. + */ +int board_eth_init(bd_t *bis) +{ + struct spi_slave *spi; + const char *s; + size_t len = 0; + int config = 1; + + davinci_emac_mii_mode_sel(0); + + /* send a config file to the switch */ + s = hwconfig_subarg("switch", "config", &len); + if (len) { + unsigned long addr = simple_strtoul(s, NULL, 16); + + config = enbw_cmc_config_switch(addr); + } + + if (config) { + /* + * no valid config file -> do we have some args in + * hwconfig ? + */ + if ((hwconfig_subarg("switch", "lan", &len)) || + (hwconfig_subarg("switch", "lmn", &len))) { + /* If so start switch */ + spi = enbw_cmc_init_spi(); + if (spi) { + if (enbw_cmc_switch_write(spi, 1, 0)) + config = 0; + udelay(10000); + if (enbw_cmc_switch_write(spi, 1, 1)) + config = 0; + spi_release_bus(spi); + spi_free_slave(spi); + } + } else { + config = 0; + } + } + if (!davinci_emac_initialize()) { + printf("Error: Ethernet init failed!\n"); + return -1; + } + + if (config) { + if (hwconfig_subarg_cmp("switch", "lan", "on")) + /* Switch port lan on */ + enbw_cmc_switch(1, 1); + else + enbw_cmc_switch(1, 0); + + if (hwconfig_subarg_cmp("switch", "lmn", "on")) + /* Switch port pwl on */ + enbw_cmc_switch(2, 1); + else + enbw_cmc_switch(2, 0); + } + + return 0; +} +#endif /* CONFIG_DRIVER_TI_EMAC */ + +#ifdef CONFIG_PREBOOT +static uchar kbd_magic_prefix[] = "key_magic_"; +static uchar kbd_command_prefix[] = "key_cmd_"; + +struct kbd_data_t { + char s1; +}; + +struct kbd_data_t *get_keys(struct kbd_data_t *kbd_data) +{ + /* read SW1 + SW2 */ + kbd_data->s1 = gpio_get_value(12) + + (gpio_get_value(13) << 1); + return kbd_data; +} + +static int compare_magic(const struct kbd_data_t *kbd_data, char *str) +{ + char s1 = str[0]; + + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s1) + return -1; + + return 0; +} + +static char *key_match(const struct kbd_data_t *kbd_data) +{ + char magic[sizeof(kbd_magic_prefix) + 1]; + char *suffix; + char *kbd_magic_keys; + + /* + * The following string defines the characters that can be appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + kbd_magic_keys = getenv("magic_keys"); + if (kbd_magic_keys == NULL) + kbd_magic_keys = ""; + + /* + * loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix || + suffix == kbd_magic_keys; ++suffix) { + sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); + + if (compare_magic(kbd_data, getenv(magic)) == 0) { + char cmd_name[sizeof(kbd_command_prefix) + 1]; + char *cmd; + + sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv(cmd_name); + + return cmd; + } + } + + return NULL; +} +#endif /* CONFIG_PREBOOT */ + +int misc_init_r(void) +{ + char *s, buf[32]; +#ifdef CONFIG_PREBOOT + struct kbd_data_t kbd_data; + /* Decode keys */ + char *str = strdup(key_match(get_keys(&kbd_data))); + /* Set or delete definition */ + setenv("preboot", str); + free(str); +#endif /* CONFIG_PREBOOT */ + + /* count all restarts, and save this in an environment var */ + s = getenv("restartcount"); + + if (s) + sprintf(buf, "%ld", simple_strtoul(s, NULL, 10) + 1); + else + strcpy(buf, "1"); + + setenv("restartcount", buf); + saveenv(); + +#ifdef CONFIG_HW_WATCHDOG + davinci_hw_watchdog_enable(); +#endif + + return 0; +} + +struct cmc_led { + char name[20]; + unsigned char bank; + unsigned char gpio; +}; + +struct cmc_led led_table[] = { + {"led1", 1, 15}, + {"led2", 0, 1}, + {"led3", 0, 2}, + {"led4", 0, 3}, + {"led5", 0, 4}, + {"led6", 0, 5}, + {"led7", 0, 6}, + {"led8", 0, 14}, +}; + +static int cmc_get_led_state(struct cmc_led *led) +{ + int value; + int gpio = led->bank * 16 + led->gpio; + + value = gpio_get_value(gpio); + + return value; +} + +static int cmc_set_led_state(struct cmc_led *led, int state) +{ + int gpio = led->bank * 16 + led->gpio; + + gpio_set_value(gpio, state); + return 0; +} + +static int do_led(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + struct cmc_led *led; + int found = 0; + int i = 0; + int only_print = 0; + int len = ARRAY_SIZE(led_table); + + if (argc < 2) + return cmd_usage(cmdtp); + + if (argc < 3) + only_print = 1; + + led = led_table; + while ((!found) && (i < len)) { + if (strcmp(argv[1], led->name) == 0) { + found = 1; + } else { + led++; + i++; + } + } + if (!found) + return cmd_usage(cmdtp); + + if (only_print) { + if (cmc_get_led_state(led)) + printf("on\n"); + else + printf("off\n"); + + return 0; + } + if (strcmp(argv[2], "on") == 0) + cmc_set_led_state(led, 1); + else + cmc_set_led_state(led, 0); + + return 0; +} + +U_BOOT_CMD(led, 3, 1, do_led, + "switch on/off board led", + "[name] [on/off]" +); + +#ifdef CONFIG_HW_WATCHDOG +void hw_watchdog_reset(void) +{ + davinci_hw_watchdog_reset(); +} +#endif + +#if defined(CONFIG_POST) +void arch_memory_failure_handle(void) +{ + struct davinci_gpio *gpio = davinci_gpio_bank01; + int state = 1; + + /* + * if memor< failure blink with the LED 1,2 and 3 + * as we running from flash, we cannot use the gpio + * api here, so access the gpio pin direct through + * the gpio register. + */ + while (1) { + if (state) { + clrbits_le32(&gpio->out_data, 0x80000006); + state = 0; + } else { + setbits_le32(&gpio->out_data, 0x80000006); + state = 1; + } + udelay(500); + } +} +#endif + +ulong post_word_load(void) +{ + struct davinci_rtc *reg = + (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; + + return in_be32(®->scratch2); +} + +void post_word_store(ulong value) +{ + struct davinci_rtc *reg = + (struct davinci_rtc *)CONFIG_SYS_POST_WORD_ADDR; + + /* + * write RTC kick register to enable write + * for RTC Scratch registers. Cratch0 and 1 are + * used for bootcount values. + */ + writel(RTC_KICK0R_WE, ®->kick0r); + writel(RTC_KICK1R_WE, ®->kick1r); + out_be32(®->scratch2, value); +} + +void board_gpio_init(void) +{ + struct davinci_gpio *gpio = davinci_gpio_bank01; + + /* + * set LED (gpio Interface not usable here) + * set LED pins to output and state 0 + */ + clrbits_le32(&gpio->dir, 0x8000407e); + clrbits_le32(&gpio->out_data, 0x8000407e); + /* set LED 1 - 5 to state on */ + setbits_le32(&gpio->out_data, 0x8000001e); + + /* + * set some gpio pins to low, this is needed early, + * so we have no gpio Interface here + * gpios: + * 8[8] Mode PV select low + * 8[9] Debug Rx Enable low + * 8[10] Mode Select PV low + * 8[11] Counter Interface RS485 Rx-Enable low + */ + gpio = davinci_gpio_bank8; + clrbits_le32(&gpio->dir, 0x00000f00); + clrbits_le32(&gpio->out_data, 0x0f00); +} + +int board_late_init(void) +{ + cmc_set_led_state(&led_table[4], 0); + + return 0; +} + +void show_boot_progress(int val) +{ + switch (val) { + case 1: + cmc_set_led_state(&led_table[4], 1); + break; + case 4: + cmc_set_led_state(&led_table[4], 0); + break; + case 15: + cmc_set_led_state(&led_table[4], 1); + break; + } +} + +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd1 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE, + .input_clk = 228000000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_2, +}; + +int board_mmc_init(bd_t *bis) +{ + mmc_sd1.input_clk = clk_get(DAVINCI_MMC_CLKID); + /* Add slot-0 to mmc subsystem */ + return davinci_mmc_init(bis, &mmc_sd1); +} +#endif |