diff options
Diffstat (limited to 'qemu/roms/u-boot/board/davinci/sffsdr')
| -rw-r--r-- | qemu/roms/u-boot/board/davinci/sffsdr/Makefile | 11 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/davinci/sffsdr/board_init.S | 16 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/davinci/sffsdr/config.mk | 23 | ||||
| -rw-r--r-- | qemu/roms/u-boot/board/davinci/sffsdr/sffsdr.c | 132 |
4 files changed, 182 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/davinci/sffsdr/Makefile b/qemu/roms/u-boot/board/davinci/sffsdr/Makefile new file mode 100644 index 000000000..4ab30a406 --- /dev/null +++ b/qemu/roms/u-boot/board/davinci/sffsdr/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := sffsdr.o +obj-y += board_init.o diff --git a/qemu/roms/u-boot/board/davinci/sffsdr/board_init.S b/qemu/roms/u-boot/board/davinci/sffsdr/board_init.S new file mode 100644 index 000000000..ded059008 --- /dev/null +++ b/qemu/roms/u-boot/board/davinci/sffsdr/board_init.S @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Board-specific low level initialization code. Called at the very end + * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no + * initialization required. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> + +.globl dv_board_init +dv_board_init: + + mov pc, lr diff --git a/qemu/roms/u-boot/board/davinci/sffsdr/config.mk b/qemu/roms/u-boot/board/davinci/sffsdr/config.mk new file mode 100644 index 000000000..4fe900799 --- /dev/null +++ b/qemu/roms/u-boot/board/davinci/sffsdr/config.mk @@ -0,0 +1,23 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> +# +# Copyright (C) 2008 Lyrtech <www.lyrtech.com> +# Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> +# +# Lyrtech SFF SDR board (ARM926EJS) cpu +# +# SFF SDR board has 1 bank of 128 MB DDR RAM +# Physical Address: +# 8000'0000 to 87FF'FFFF +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# +# Integrity kernel is expected to be at 8000'0000, entry 8000'00D0, +# up to 81FF'FFFF (uses up to 32 MB of memory for text, heap, etc). +# +# we load ourself to 8400'0000 to provide at least 32MB spacing +# between us and the Integrity kernel image +CONFIG_SYS_TEXT_BASE = 0x84000000 diff --git a/qemu/roms/u-boot/board/davinci/sffsdr/sffsdr.c b/qemu/roms/u-boot/board/davinci/sffsdr/sffsdr.c new file mode 100644 index 000000000..f6ab91e6f --- /dev/null +++ b/qemu/roms/u-boot/board/davinci/sffsdr/sffsdr.c @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com> + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * + * Copyright (C) 2004 Texas Instruments. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/davinci_misc.h> + +#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ +#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ + +#define INTEGRITY_SYSCFG_OFFSET 0x7E8 +#define INTEGRITY_CHECKWORD_OFFSET 0x7F8 +#define INTEGRITY_CHECKWORD_VALUE 0x10ADBEEF + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_SFFSDR; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + davinci_errata_workarounds(); + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_GPIO); + +#if !defined(CONFIG_SYS_USE_DSPLINK) + /* Powerup the DSP */ + dsp_on(); +#endif /* CONFIG_SYS_USE_DSPLINK */ + + davinci_enable_uart0(); + davinci_enable_emac(); + davinci_enable_i2c(); + + lpsc_on(DAVINCI_LPSC_TIMER1); + timer_init(); + + return(0); +} + +/* Read ethernet MAC address from Integrity data structure inside EEPROM. + * Returns 1 if found, 0 otherwise. + */ +static int sffsdr_read_mac_address(uint8_t *buf) +{ + u_int32_t value, mac[2], address; + + /* Read Integrity data structure checkword. */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + if (value != INTEGRITY_CHECKWORD_VALUE) + return 0; + + /* Read SYSCFG structure offset. */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + (int) value; /* Address of SYSCFG structure. */ + + /* Read NET CONFIG structure offset. */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + (int) value; /* Address of NET CONFIG structure. */ + address += 12; /* Address of NET INTERFACE CONFIG structure. */ + + /* Read NET INTERFACE CONFIG 2 structure offset. */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) + goto err; + address = 0x800 + 16 + (int) value; /* Address of NET INTERFACE + * CONFIG 2 structure. */ + + /* Read MAC address. */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8)) + goto err; + + buf[0] = mac[0] >> 24; + buf[1] = mac[0] >> 16; + buf[2] = mac[0] >> 8; + buf[3] = mac[0]; + buf[4] = mac[1] >> 24; + buf[5] = mac[1] >> 16; + + return 1; /* Found */ + +err: + printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR); + return 0; +} + +/* Platform dependent initialisation. */ +int misc_init_r(void) +{ + uint8_t i2cbuf; + uint8_t eeprom_enetaddr[6]; + + /* EMIF-A CS3 configuration for FPGA. */ + REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; + + /* Configure I2C switch (PCA9543) to enable channel 0. */ + i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0; + if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0, + CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) { + printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR); + return 1; + } + + /* Read Ethernet MAC address from EEPROM if available. */ + if (sffsdr_read_mac_address(eeprom_enetaddr)) + davinci_sync_env_enetaddr(eeprom_enetaddr); + + return(0); +} |