1 files changed, 0 insertions, 139 deletions
diff --git a/qemu/roms/u-boot/board/bluegiga/apx4devkit/apx4devkit.c b/qemu/roms/u-boot/board/bluegiga/apx4devkit/apx4devkit.c
deleted file mode 100644
index 08e79bd7a..000000000
--- a/qemu/roms/u-boot/board/bluegiga/apx4devkit/apx4devkit.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Bluegiga APX4 Development Kit
- *
- * Copyright (C) 2012 Bluegiga Technologies Oy
- *
- * Authors:
- * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
- * Lauri Hintsala <lauri.hintsala@bluegiga.com>
- *
- * Based on m28evk.c:
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Functions */
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP0 clock at 96MHz */
-	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	return mxsmmc_initialize(bis, 0, NULL, NULL);
-}
-#endif
-
-
-#ifdef CONFIG_CMD_NET
-
-#define MII_PHY_CTRL2 0x1f
-int fecmxc_mii_postcall(int phy)
-{
-	/* change PHY RMII clock to 50MHz */
-	miiphy_write("FEC", 0, MII_PHY_CTRL2, 0x8180);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int ret;
-	struct eth_device *dev;
-
-	ret = cpu_eth_init(bis);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC clocks\n");
-		return ret;
-	}
-
-	ret = fecmxc_initialize(bis);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC");
-	if (!dev) {
-		printf("FEC MXS: Unable to get FEC device entry\n");
-		return -EINVAL;
-	}
-
-	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-	if (ret) {
-		printf("FEC MXS: Unable to register FEC MII postcall\n");
-		return ret;
-	}
-
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_SERIAL_TAG
-#define MXS_OCOTP_MAX_TIMEOUT 1000000
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-	struct mxs_ocotp_regs *ocotp_regs =
-		(struct mxs_ocotp_regs *)MXS_OCOTP_BASE;
-
-	serialnr->high = 0;
-	serialnr->low = 0;
-
-	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
-	if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
-		MXS_OCOTP_MAX_TIMEOUT)) {
-		printf("MXS: Can't get serial number from OCOTP\n");
-		return;
-	}
-
-	serialnr->low = readl(&ocotp_regs->hw_ocotp_cust3);
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	if (getenv("revision#") != NULL)
-		return simple_strtoul(getenv("revision#"), NULL, 10);
-	return 0;
-}
-#endif