diff options
Diffstat (limited to 'qemu/roms/u-boot/board/amcc/luan/luan.c')
| -rw-r--r-- | qemu/roms/u-boot/board/amcc/luan/luan.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/board/amcc/luan/luan.c b/qemu/roms/u-boot/board/amcc/luan/luan.c new file mode 100644 index 000000000..774671db4 --- /dev/null +++ b/qemu/roms/u-boot/board/amcc/luan/luan.c @@ -0,0 +1,223 @@ +/* + * (C) Copyright 2005 + * John Otken, jotken@softadvances.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <asm/ppc4xx.h> +#include <asm/processor.h> +#include <asm/ppc4xx-isram.h> +#include <spd_sdram.h> +#include "epld.h" + +DECLARE_GLOBAL_DATA_PTR; + +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ + + +/************************************************************************* + * int board_early_init_f() + * + ************************************************************************/ +int board_early_init_f(void) +{ + u32 mfr; + + mtebc( PB0AP, 0x03800000 ); /* set chip selects */ + mtebc( PB0CR, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */ + mtebc( PB1AP, 0x03800000 ); + mtebc( PB1CR, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */ + mtebc( PB2AP, 0x03800000 ); + mtebc( PB2CR, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */ + + mtdcr( UIC1SR, 0xffffffff ); /* Clear all interrupts */ + mtdcr( UIC1ER, 0x00000000 ); /* disable all interrupts */ + mtdcr( UIC1CR, 0x00000000 ); /* Set Critical / Non Critical interrupts */ + mtdcr( UIC1PR, 0x7fff83ff ); /* Set Interrupt Polarities */ + mtdcr( UIC1TR, 0x001f8000 ); /* Set Interrupt Trigger Levels */ + mtdcr( UIC1VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( UIC1SR, 0x00000000 ); /* clear all interrupts */ + mtdcr( UIC1SR, 0xffffffff ); + + mtdcr( UIC0SR, 0xffffffff ); /* Clear all interrupts */ + mtdcr( UIC0ER, 0x00000000 ); /* disable all interrupts excepted cascade */ + mtdcr( UIC0CR, 0x00000001 ); /* Set Critical / Non Critical interrupts */ + mtdcr( UIC0PR, 0xffffffff ); /* Set Interrupt Polarities */ + mtdcr( UIC0TR, 0x01000004 ); /* Set Interrupt Trigger Levels */ + mtdcr( UIC0VR, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */ + mtdcr( UIC0SR, 0x00000000 ); /* clear all interrupts */ + mtdcr( UIC0SR, 0xffffffff ); + + mfsdr(SDR0_MFR, mfr); + mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */ + mtsdr(SDR0_MFR, mfr); + + return 0; +} + + +/************************************************************************* + * int misc_init_r() + * + ************************************************************************/ +int misc_init_r(void) +{ + volatile epld_t *x = (epld_t *) CONFIG_SYS_EPLD_BASE; + + /* set modes of operation */ + x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 | + EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE; + /* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */ + x->ethuart &= ~EPLD2_ETH_AUTO_NEGO; + + /* put Ethernet+PHY in reset */ + x->ethuart &= ~EPLD2_RESET_ETH_N; + udelay(10000); + /* take Ethernet+PHY out of reset */ + x->ethuart |= EPLD2_RESET_ETH_N; + + return 0; +} + + +/************************************************************************* + * int checkboard() + * + ************************************************************************/ +int checkboard(void) +{ + char buf[64]; + int i = getenv_f("serial#", buf, sizeof(buf)); + + printf("Board: Luan - AMCC PPC440SP Evaluation Board"); + + if (i > 0) { + puts(", serial# "); + puts(buf); + } + putc('\n'); + + return 0; +} + +/* + * Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with + * board specific values. + */ +u32 ddr_clktr(u32 default_val) { + return (SDRAM_CLKTR_CLKP_180_DEG_ADV); +} + +/************************************************************************* + * hw_watchdog_reset + * + * This routine is called to reset (keep alive) the watchdog timer + * + ************************************************************************/ +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ +} +#endif + + +/************************************************************************* + * int on_off() + * + ************************************************************************/ +static int on_off( const char *s ) +{ + if (strcmp(s, "on") == 0) { + return 1; + } else if (strcmp(s, "off") == 0) { + return 0; + } + return -1; +} + + +/************************************************************************* + * void l2cache_disable() + * + ************************************************************************/ +static void l2cache_disable(void) +{ + mtdcr( L2_CACHE_CFG, 0 ); +} + + +/************************************************************************* + * void l2cache_enable() + * + ************************************************************************/ +static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */ +{ + mtdcr( L2_CACHE_CFG, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */ + + mtdcr( L2_CACHE_ADDR, 0 ); /* set L2_ADDR with all zeros */ + + mtdcr( L2_CACHE_CMD, 0x80000000 ); /* issue HCLEAR command via L2_CMD */ + + while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 )) ;; /* poll L2_SR for completion */ + + mtdcr( L2_CACHE_CMD, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */ + + mtdcr( L2_CACHE_CMD, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */ + + mtdcr( L2_CACHE_SNP0, 0 ); /* snoop registers */ + mtdcr( L2_CACHE_SNP1, 0 ); + + __asm__ volatile ("sync"); /* msync */ + + mtdcr( L2_CACHE_CFG, 0xe0000000 ); /* inst and data use L2 */ + + __asm__ volatile ("sync"); +} + + +/************************************************************************* + * int l2cache_status() + * + ************************************************************************/ +static int l2cache_status(void) +{ + return (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0; +} + + +/************************************************************************* + * int do_l2cache() + * + ************************************************************************/ +int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) +{ + switch (argc) { + case 2: /* on / off */ + switch (on_off(argv[1])) { + case 0: l2cache_disable(); + break; + case 1: l2cache_enable(); + break; + } + /* FALL TROUGH */ + case 1: /* get status */ + printf ("L2 Cache is %s\n", + l2cache_status() ? "ON" : "OFF"); + return 0; + default: + return cmd_usage(cmdtp); + } + + return 0; +} + + +U_BOOT_CMD( + l2cache, 2, 1, do_l2cache, + "enable or disable L2 cache", + "[on, off]\n" + " - enable or disable L2 cache" +); |