1 files changed, 128 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/arch/sparc/cpu/leon3/serial.c b/qemu/roms/u-boot/arch/sparc/cpu/leon3/serial.c
new file mode 100644
index 000000000..bca6b6548
--- /dev/null
+++ b/qemu/roms/u-boot/arch/sparc/cpu/leon3/serial.c
@@ -0,0 +1,128 @@
+/* GRLIB APBUART Serial controller driver
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/leon.h>
+#include <ambapp.h>
+#include <serial.h>
+#include <linux/compiler.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ambapp_dev_apbuart *leon3_apbuart = NULL;
+
+static int leon3_serial_init(void)
+{
+	ambapp_apbdev apbdev;
+	unsigned int tmp;
+
+	/* find UART */
+	if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) == 1) {
+
+		leon3_apbuart = (ambapp_dev_apbuart *) apbdev.address;
+
+		/* found apbuart, let's init...
+		 *
+		 * Set scaler / baud rate
+		 *
+		 * Receiver & transmitter enable
+		 */
+		leon3_apbuart->scaler = CONFIG_SYS_GRLIB_APBUART_SCALER;
+
+		/* Let bit 11 be unchanged (debug bit for GRMON) */
+		tmp = READ_WORD(leon3_apbuart->ctrl);
+
+		leon3_apbuart->ctrl = ((tmp & LEON_REG_UART_CTRL_DBG) |
+				       LEON_REG_UART_CTRL_RE |
+				       LEON_REG_UART_CTRL_TE);
+
+		return 0;
+	}
+	return -1;		/* didn't find hardware */
+}
+
+static void leon3_serial_putc_raw(const char c)
+{
+	if (!leon3_apbuart)
+		return;
+
+	/* Wait for last character to go. */
+	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_THE)) ;
+
+	/* Send data */
+	leon3_apbuart->data = c;
+
+#ifdef LEON_DEBUG
+	/* Wait for data to be sent */
+	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_TSE)) ;
+#endif
+}
+
+static void leon3_serial_putc(const char c)
+{
+	if (c == '\n')
+		leon3_serial_putc_raw('\r');
+
+	leon3_serial_putc_raw(c);
+}
+
+static int leon3_serial_getc(void)
+{
+	if (!leon3_apbuart)
+		return 0;
+
+	/* Wait for a character to arrive. */
+	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_DR)) ;
+
+	/* read data */
+	return READ_WORD(leon3_apbuart->data);
+}
+
+static int leon3_serial_tstc(void)
+{
+	if (leon3_apbuart)
+		return (READ_WORD(leon3_apbuart->status) &
+			LEON_REG_UART_STATUS_DR);
+	return 0;
+}
+
+/* set baud rate for uart */
+static void leon3_serial_setbrg(void)
+{
+	/* update baud rate settings, read it from gd->baudrate */
+	unsigned int scaler;
+	if (leon3_apbuart && (gd->baudrate > 0)) {
+		scaler =
+		    (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
+		     5) / 10;
+		leon3_apbuart->scaler = scaler;
+	}
+	return;
+}
+
+static struct serial_device leon3_serial_drv = {
+	.name	= "leon3_serial",
+	.start	= leon3_serial_init,
+	.stop	= NULL,
+	.setbrg	= leon3_serial_setbrg,
+	.putc	= leon3_serial_putc,
+	.puts	= default_serial_puts,
+	.getc	= leon3_serial_getc,
+	.tstc	= leon3_serial_tstc,
+};
+
+void leon3_serial_initialize(void)
+{
+	serial_register(&leon3_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &leon3_serial_drv;
+}