diff options
Diffstat (limited to 'qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c')
| -rw-r--r-- | qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c new file mode 100644 index 000000000..4e9a40d58 --- /dev/null +++ b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/cmd_chip_config.c @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2008-2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2009 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <asm/ppc4xx_config.h> +#include <asm/io.h> + +static void print_configs(int cur_config_nr) +{ + int i; + + for (i = 0; i < ppc4xx_config_count; i++) { + printf("%-16s - %s", ppc4xx_config_val[i].label, + ppc4xx_config_val[i].description); + if (i == cur_config_nr) + printf(" ***"); + printf("\n"); + } + +} + +static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int i; + int ret; + int cur_config_nr = -1; + u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE]; + + /* + * First switch to correct I2C bus. This is I2C bus 0 + * for all currently available 4xx derivats. + */ + i2c_set_bus_num(0); + +#ifdef CONFIG_CMD_EEPROM + ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE); +#else + ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE); +#endif + if (ret) { + printf("Error reading EEPROM at addr 0x%x\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + return -1; + } + + /* + * Search the current configuration + */ + for (i = 0; i < ppc4xx_config_count; i++) { + if (memcmp(cur_config, ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE) == 0) + cur_config_nr = i; + } + + if (cur_config_nr == -1) { + printf("Warning: The I2C bootstrap values don't match any" + " of the available options!\n"); + printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) { + printf("%02x ", cur_config[i]); + } + printf("\n"); + } + + if (argc < 2) { + printf("Available configurations (I2C address 0x%02x):\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + print_configs(cur_config_nr); + return 0; + } + + for (i = 0; i < ppc4xx_config_count; i++) { + /* + * Search for configuration name/label + */ + if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) { + printf("Using configuration:\n%-16s - %s\n", + ppc4xx_config_val[i].label, + ppc4xx_config_val[i].description); + +#ifdef CONFIG_CMD_EEPROM + ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE); +#else + ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + 1, ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE); +#endif + udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + if (ret) { + printf("Error updating EEPROM at addr 0x%x\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + return -1; + } + + printf("done (dump via 'i2c md %x 0.1 %x')\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_BLOCKSIZE); + printf("Reset the board for the changes to" + " take effect\n"); + return 0; + } + } + + printf("Configuration %s not found!\n", argv[1]); + print_configs(cur_config_nr); + return -1; +} + +U_BOOT_CMD( + chip_config, 2, 0, do_chip_config, + "program the I2C bootstrap EEPROM", + "[config-label]" +); |