diff options
Diffstat (limited to 'qemu/roms/u-boot/arch/blackfin/cpu/cpu.c')
| -rw-r--r-- | qemu/roms/u-boot/arch/blackfin/cpu/cpu.c | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c b/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c new file mode 100644 index 000000000..2409c300e --- /dev/null +++ b/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c @@ -0,0 +1,152 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/cplb.h> +#include <asm/mach-common/bits/core.h> +#include <asm/mach-common/bits/ebiu.h> +#include <asm/mach-common/bits/trace.h> +#include <asm/serial.h> + +#include "cpu.h" +#include "initcode.h" + +ulong bfin_poweron_retx; + +#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START) +void bfin_core1_start(void) +{ +#ifdef BF561_FAMILY + /* Enable core 1 */ + bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020); +#else + /* Enable core 1 */ + bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START); + bfin_write32(RCU0_CRCTL, 0); + + bfin_write32(RCU0_CRCTL, 0x2); + + /* Check if core 1 starts */ + while (!(bfin_read32(RCU0_CRSTAT) & 0x2)) + continue; + + bfin_write32(RCU0_CRCTL, 0); + + /* flag to notify cces core 1 application */ + bfin_write32(SDU0_MSG_SET, (1 << 19)); +#endif +} +#endif + +__attribute__ ((__noreturn__)) +void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) +{ +#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1 + /* Build a NOP slide over the LDR jump block. Whee! */ + char nops[0xC]; + serial_early_puts("NOP Slide\n"); + memset(nops, 0x00, sizeof(nops)); + memcpy((void *)L1_INST_SRAM, nops, sizeof(nops)); +#endif + + if (!loaded_from_ldr) { + /* Relocate sections into L1 if the LDR didn't do it -- don't + * check length because the linker script does the size + * checking at build time. + */ + serial_early_puts("L1 Relocate\n"); + extern char _stext_l1[], _text_l1_lma[], _text_l1_len[]; + memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len); + extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[]; + memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len); + } + + /* + * Make sure our async settings are committed. Some bootroms + * (like the BF537) will reset some registers on us after it + * has finished loading the LDR. Or if we're booting over + * JTAG, the initcode never got a chance to run. Or if we + * aren't booting from parallel flash, the initcode skipped + * this step completely. + */ + program_async_controller(NULL); + + /* Save RETX so we can pass it while booting Linux */ + bfin_poweron_retx = bootflag; + +#ifdef CONFIG_DEBUG_DUMP + /* Turn on hardware trace buffer */ + bfin_write_TBUFCTL(TBUFPWR | TBUFEN); +#endif + +#ifndef CONFIG_PANIC_HANG + /* Reset upon a double exception rather than just hanging. + * Do not do bfin_read on SWRST as that will reset status bits. + */ +# ifdef SWRST + bfin_write_SWRST(DOUBLE_FAULT); +# endif +#endif + +#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START) + bfin_core1_start(); +#endif + + serial_early_puts("Board init flash\n"); + board_init_f(bootflag); + + /* should not be reached */ + while (1); +} + +int exception_init(void) +{ + bfin_write_EVT3(trap); + return 0; +} + +int irq_init(void) +{ +#ifdef SIC_IMASK0 + bfin_write_SIC_IMASK0(0); + bfin_write_SIC_IMASK1(0); +# ifdef SIC_IMASK2 + bfin_write_SIC_IMASK2(0); +# endif +#elif defined(SICA_IMASK0) + bfin_write_SICA_IMASK0(0); + bfin_write_SICA_IMASK1(0); +#elif defined(SIC_IMASK) + bfin_write_SIC_IMASK(0); +#endif + /* Set up a dummy NMI handler if needed. */ + if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219) + bfin_write_EVT2(evt_nmi); /* NMI */ + bfin_write_EVT5(evt_default); /* hardware error */ + bfin_write_EVT6(evt_default); /* core timer */ + bfin_write_EVT7(evt_default); + bfin_write_EVT8(evt_default); + bfin_write_EVT9(evt_default); + bfin_write_EVT10(evt_default); + bfin_write_EVT11(evt_default); + bfin_write_EVT12(evt_default); + bfin_write_EVT13(evt_default); + bfin_write_EVT14(evt_default); + bfin_write_EVT15(evt_default); + bfin_write_ILAT(0); + CSYNC(); + /* enable hardware error irq */ + irq_flags = 0x3f; + local_irq_enable(); + return 0; +} |