diff options
Diffstat (limited to 'qemu/roms/seabios/scripts/kconfig/Makefile')
| -rw-r--r-- | qemu/roms/seabios/scripts/kconfig/Makefile | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/qemu/roms/seabios/scripts/kconfig/Makefile b/qemu/roms/seabios/scripts/kconfig/Makefile deleted file mode 100644 index 1c1293618..000000000 --- a/qemu/roms/seabios/scripts/kconfig/Makefile +++ /dev/null @@ -1,331 +0,0 @@ -# =========================================================================== -# Kernel configuration targets -# These targets are used from top-level makefile - -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ - localmodconfig localyesconfig - -ifdef KBUILD_KCONFIG -Kconfig := $(KBUILD_KCONFIG) -else -Kconfig := Kconfig -endif - -# We need this, in case the user has it in its environment -unexport CONFIG_ - -xconfig: $(obj)/qconf - $< $(Kconfig) - -gconfig: $(obj)/gconf - $< $(Kconfig) - -menuconfig: $(obj)/mconf - $< $(Kconfig) - -config: $(obj)/conf - $< --oldaskconfig $(Kconfig) - -nconfig: $(obj)/nconf - $< $(Kconfig) - -oldconfig: $(obj)/conf - $< --$@ $(Kconfig) - -silentoldconfig: $(obj)/conf - @echo " Build Kconfig config file" - $(Q)mkdir -p include/config include/generated - $(Q)$< --$@ $(Kconfig) - -localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)mkdir -p include/config include/generated - $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config - $(Q)if [ -f .config ]; then \ - cmp -s .tmp.config .config || \ - (mv -f .config .config.old.1; \ - mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ - mv -f .config.old.1 .config.old) \ - else \ - mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ - fi - $(Q)rm -f .tmp.config - -# Create new linux.pot file -# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files -update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config.pot" - $(Q)xgettext --default-domain=linux \ - --add-comments --keyword=_ --keyword=N_ \ - --from-code=UTF-8 \ - --files-from=$(srctree)/scripts/kconfig/POTFILES.in \ - --directory=$(srctree) --directory=$(objtree) \ - --output $(obj)/config.pot - $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot - $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ - $(srctree)/arch/*/um/Kconfig`; \ - do \ - echo " GEN $$i"; \ - $(obj)/kxgettext $$i \ - >> $(obj)/config.pot; \ - done ) - $(Q)echo " GEN linux.pot" - $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ - --output $(obj)/linux.pot - $(Q)rm -f $(obj)/config.pot - -PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig - -allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf - $< --$@ $(Kconfig) - -PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig - -listnewconfig olddefconfig: $(obj)/conf - $< --$@ $(Kconfig) - -# oldnoconfig is an alias of olddefconfig, because people already are dependent -# on its behavior(sets new symbols to their default value but not 'n') with the -# counter-intuitive name. -oldnoconfig: $(obj)/conf - $< --olddefconfig $(Kconfig) - -savedefconfig: $(obj)/conf - $< --$@=defconfig $(Kconfig) - -defconfig: $(obj)/conf - @echo " Build default config" - $(Q)$< --defconfig=/dev/null $(Kconfig) - -%_defconfig: $(obj)/conf - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) - -# Help text used by make help -help: - @echo ' config - Update current config utilising a line-oriented program' - @echo ' nconfig - Update current config utilising a ncurses menu based program' - @echo ' menuconfig - Update current config utilising a menu based program' - @echo ' xconfig - Update current config utilising a QT based front-end' - @echo ' gconfig - Update current config utilising a GTK based front-end' - @echo ' oldconfig - Update current config utilising a provided .config as base' - @echo ' localmodconfig - Update current config disabling modules not loaded' - @echo ' localyesconfig - Update current config converting local mods to core' - @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' - @echo ' defconfig - New config with default from ARCH supplied defconfig' - @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' - @echo ' allnoconfig - New config where all options are answered with no' - @echo ' allyesconfig - New config where all options are accepted with yes' - @echo ' allmodconfig - New config selecting modules when possible' - @echo ' alldefconfig - New config with all symbols set to default' - @echo ' randconfig - New config with random answer to all options' - @echo ' listnewconfig - List new options' - @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - -# lxdialog stuff -check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh - -# Use recursively expanded variables so we do not call gcc unless -# we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ - -DLOCALE - -# =========================================================================== -# Shared Makefile for the various kconfig executables: -# conf: Used for defconfig, oldconfig and related targets -# nconf: Used for the nconfig target. -# Utilizes ncurses -# mconf: Used for the menuconfig target -# Utilizes the lxdialog package -# qconf: Used for the xconfig target -# Based on QT which needs to be installed to compile it -# gconf: Used for the gconfig target -# Based on GTK which needs to be installed to compile it -# object files used by all kconfig flavours - -lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o -lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o - -conf-objs := conf.o zconf.tab.o -mconf-objs := mconf.o zconf.tab.o $(lxdialog) -nconf-objs := nconf.o zconf.tab.o nconf.gui.o -kxgettext-objs := kxgettext.o zconf.tab.o -qconf-cxxobjs := qconf.o -qconf-objs := zconf.tab.o -gconf-objs := gconf.o zconf.tab.o - -hostprogs-y := conf - -ifeq ($(MAKECMDGOALS),nconfig) - hostprogs-y += nconf -endif - -ifeq ($(MAKECMDGOALS),menuconfig) - hostprogs-y += mconf -endif - -ifeq ($(MAKECMDGOALS),update-po-config) - hostprogs-y += kxgettext -endif - -ifeq ($(MAKECMDGOALS),xconfig) - qconf-target := 1 -endif -ifeq ($(MAKECMDGOALS),gconfig) - gconf-target := 1 -endif - - -ifeq ($(qconf-target),1) - hostprogs-y += qconf -endif - -ifeq ($(gconf-target),1) - hostprogs-y += gconf -endif - -clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck -clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf -clean-files += config.pot linux.pot - -# Check that we have the required ncurses stuff installed for lxdialog (menuconfig) -PHONY += $(obj)/dochecklxdialog -$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog -$(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) - -always := dochecklxdialog - -# Add environment specific flags -HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) - -# generated files seem to need this to find local include files -HOSTCFLAGS_zconf.lex.o := -I$(src) -HOSTCFLAGS_zconf.tab.o := -I$(src) - -LEX_PREFIX_zconf := zconf -YACC_PREFIX_zconf := zconf - -HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) - -HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ - -Wno-missing-prototypes - -HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOSTLOADLIBES_nconf = $(shell \ - pkg-config --libs menu panel ncurses 2>/dev/null \ - || echo "-lmenu -lpanel -lncurses" ) -$(obj)/qconf.o: $(obj)/.tmp_qtcheck - -ifeq ($(qconf-target),1) -$(obj)/.tmp_qtcheck: $(src)/Makefile --include $(obj)/.tmp_qtcheck - -# QT needs some extra effort... -$(obj)/.tmp_qtcheck: - @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - if ! pkg-config --exists QtCore 2> /dev/null; then \ - echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ - else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo >&2 "*"; \ - echo >&2 "* Unable to find any QT installation. Please make sure that"; \ - echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ - echo >&2 "* either qmake can be found or install pkg-config or set"; \ - echo >&2 "* the QTDIR environment variable to the correct location."; \ - echo >&2 "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ - fi; \ - else \ - cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ - moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ - [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ - fi; \ - echo "KC_QT_CFLAGS=$$cflags" > $@; \ - echo "KC_QT_LIBS=$$libs" >> $@; \ - echo "KC_QT_MOC=$$moc" >> $@ -endif - -$(obj)/gconf.o: $(obj)/.tmp_gtkcheck - -ifeq ($(gconf-target),1) --include $(obj)/.tmp_gtkcheck - -# GTK needs some extra effort, too... -$(obj)/.tmp_gtkcheck: - @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \ - if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ - touch $@; \ - else \ - echo >&2 "*"; \ - echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \ - echo >&2 "*"; \ - false; \ - fi \ - else \ - echo >&2 "*"; \ - echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \ - echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \ - echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \ - echo >&2 "*"; \ - false; \ - fi -endif - -$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c - -$(obj)/qconf.o: $(obj)/qconf.moc - -quiet_cmd_moc = MOC $@ - cmd_moc = $(KC_QT_MOC) -i $< -o $@ - -$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck - $(call cmd,moc) - -# Extract gconf menu items for I18N support -$(obj)/gconf.glade.h: $(obj)/gconf.glade - $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ - $(obj)/gconf.glade - -VPATH := $(srctree) - -$(obj)/%:: $(src)/%_shipped - $(Q)cat $< > $@ - -host-cobjs := $(sort $(foreach m,$(hostprogs-y),$($(m)-objs))) -host-cobjs := $(addprefix $(obj)/,$(host-cobjs)) -hostprogs-y := $(addprefix $(obj)/,$(hostprogs-y)) -$(host-cobjs) : $(obj)/%.o : $(src)/%.c - $(Q)$(HOSTCC) -I$(obj) -I$(srctree)/$(src) $(HOSTCFLAGS) $(HOSTCFLAGS_$(@F)) $(HOST_EXTRACFLAGS) -c -o $@ $< -$(hostprogs-y) : $(obj)/% : $(host-cobjs) - $(Q)$(HOSTCC) $(HOSTLDFLAGS) -o $@ $(addprefix $(obj)/,$($(@F)-objs)) $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) |