summaryrefslogtreecommitdiffstats
path: root/qemu/roms/ipxe/src/drivers/net/3c515.c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/ipxe/src/drivers/net/3c515.c')
-rw-r--r--qemu/roms/ipxe/src/drivers/net/3c515.c764
1 files changed, 764 insertions, 0 deletions
diff --git a/qemu/roms/ipxe/src/drivers/net/3c515.c b/qemu/roms/ipxe/src/drivers/net/3c515.c
new file mode 100644
index 000000000..1591e0617
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/3c515.c
@@ -0,0 +1,764 @@
+/*
+* 3c515.c -- 3COM 3C515 Fast Etherlink ISA 10/100BASE-TX driver for etherboot
+* Copyright (C) 2002 Timothy Legge <tlegge@rogers.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+* 02110-1301, USA.
+*
+* Portions of this code:
+* Copyright (C) 1997-2002 Donald Becker 3c515.c: A 3Com ISA EtherLink XL "Corkscrew" ethernet driver for linux.
+* Copyright (C) 2001 P.J.H.Fox (fox@roestock.demon.co.uk) ISAPNP Tools
+* Copyright (c) 2002 Jaroslav Kysela <perex@suse.cz> ISA Plug & Play support Linux Kernel
+* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp> etherboot-5.0.5 3c595.c
+* Coptright (C) 1995 Martin Renters etherboot-5.0.5 3c509.c
+* Copyright (C) 1999 LightSys Technology Services, Inc. etherboot-5.0.5 3c90x.c
+* Portions Copyright (C) 1999 Steve Smith etherboot-5.0.5 3c90x.c
+*
+* The probe and reset functions and defines are direct copies from the
+* Becker code modified where necessary to make it work for etherboot
+*
+* The poll and transmit functions either contain code from or were written by referencing
+* the above referenced etherboot drivers. This driver would not have been
+* possible without this prior work
+*
+* REVISION HISTORY:
+* ================
+* v0.10 4-17-2002 TJL Initial implementation.
+* v0.11 4-17-2002 TJL Cleanup of the code
+* v0.12 4-26-2002 TJL Added ISA Plug and Play for Non-PNP Bioses
+* v0.13 6-10-2002 TJL Fixed ISA_PNP MAC Address problem
+* v0.14 9-23-2003 TJL Replaced delay with currticks
+*
+* Indent Options: indent -kr -i8
+* *********************************************************/
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+/* to get some global routines like printf */
+#include "etherboot.h"
+/* to get the interface to the body of the program */
+#include "nic.h"
+#include <ipxe/isapnp.h>
+#include <ipxe/isa.h> /* for ISA_ROM */
+#include <ipxe/ethernet.h>
+
+static void t3c515_wait(unsigned int nticks)
+{
+ unsigned int to = currticks() + nticks;
+ while (currticks() < to)
+ /* wait */ ;
+}
+
+/* TJL definations */
+#define HZ 100
+static int if_port;
+static struct corkscrew_private *vp;
+/* Brought directly from 3c515.c by Becker */
+#define CORKSCREW 1
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt.
+static int max_interrupt_work = 20;
+*/
+
+/* Enable the automatic media selection code -- usually set. */
+#define AUTOMEDIA 1
+
+/* Allow the use of fragment bus master transfers instead of only
+ programmed-I/O for Vortex cards. Full-bus-master transfers are always
+ enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined,
+ the feature may be turned on using 'options'. */
+#define VORTEX_BUS_MASTER
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE 16
+#define RX_RING_SIZE 16
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
+
+/* "Knobs" for adjusting internal parameters. */
+/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
+#define DRIVER_DEBUG 1
+/* Some values here only for performance evaluation and path-coverage
+ debugging.
+static int rx_nocopy, rx_copy, queued_packet;
+*/
+
+#define CORKSCREW_ID 10
+
+#define EL3WINDOW(win_num) \
+ outw(SelectWindow + (win_num), nic->ioaddr + EL3_CMD)
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+#define RX_BYTES_MASK (unsigned short) (0x07ff)
+
+enum corkscrew_cmd {
+ TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
+ RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
+ UpStall = 6 << 11, UpUnstall = (6 << 11) + 1,
+ DownStall = (6 << 11) + 2, DownUnstall = (6 << 11) + 3,
+ RxDiscard = 8 << 11, TxEnable = 9 << 11, TxDisable =
+ 10 << 11, TxReset = 11 << 11,
+ FakeIntr = 12 << 11, AckIntr = 13 << 11, SetIntrEnb = 14 << 11,
+ SetStatusEnb = 15 << 11, SetRxFilter = 16 << 11, SetRxThreshold =
+ 17 << 11,
+ SetTxThreshold = 18 << 11, SetTxStart = 19 << 11,
+ StartDMAUp = 20 << 11, StartDMADown = (20 << 11) + 1, StatsEnable =
+ 21 << 11,
+ StatsDisable = 22 << 11, StopCoax = 23 << 11,
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Bits in the general status register. */
+enum corkscrew_status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080,
+ DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
+ DMAInProgress = 1 << 11, /* DMA controller is still busy. */
+ CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+ On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+ TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
+ RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
+ TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+ Wn0IRQ = 0x08,
+#if defined(CORKSCREW)
+ Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */
+ Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */
+#else
+ Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */
+ Wn0EepromData = 12, /* Window 0: EEPROM results register. */
+#endif
+};
+enum Win0_EEPROM_bits {
+ EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+ EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
+ EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
+};
+
+enum Window3 { /* Window 3: MAC/config bits. */
+ Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
+};
+union wn3_config {
+ int i;
+ struct w3_config_fields {
+ unsigned int ram_size:3, ram_width:1, ram_speed:2,
+ rom_size:2;
+ int pad8:8;
+ unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1,
+ autoselect:1;
+ int pad24:7;
+ } u;
+};
+
+enum Window4 {
+ Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */
+};
+enum Win4_Media_bits {
+ Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */
+ Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */
+ Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */
+ Media_LnkBeat = 0x0800,
+};
+enum Window7 { /* Window 7: Bus Master control. */
+ Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
+};
+
+/* Boomerang-style bus master control registers. Note ISA aliases! */
+enum MasterCtrl {
+ PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
+ 0x40c,
+ TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
+};
+
+/* The Rx and Tx descriptor lists.
+ Caution Alpha hackers: these types are 32 bits! Note also the 8 byte
+ alignment contraint on tx_ring[] and rx_ring[]. */
+struct boom_rx_desc {
+ u32 next;
+ s32 status;
+ u32 addr;
+ s32 length;
+};
+
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+ RxDComplete = 0x00008000, RxDError = 0x4000,
+ /* See boomerang_rx() for actual error bits */
+};
+
+struct boom_tx_desc {
+ u32 next;
+ s32 status;
+ u32 addr;
+ s32 length;
+};
+
+struct corkscrew_private {
+ const char *product_name;
+ struct net_device *next_module;
+ /* The Rx and Tx rings are here to keep them quad-word-aligned. */
+ struct boom_rx_desc rx_ring[RX_RING_SIZE];
+ struct boom_tx_desc tx_ring[TX_RING_SIZE];
+ /* The addresses of transmit- and receive-in-place skbuffs. */
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+ struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */
+ int capabilities; /* Adapter capabilities word. */
+ int options; /* User-settable misc. driver options. */
+ int last_rx_packets; /* For media autoselection. */
+ unsigned int available_media:8, /* From Wn3_Options */
+ media_override:3, /* Passed-in media type. */
+ default_media:3, /* Read from the EEPROM. */
+ full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */
+ full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */
+ tx_full:1;
+};
+
+/* The action to take with a media selection timer tick.
+ Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+ XCVR_10baseT =
+ 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+ XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
+};
+
+static struct media_table {
+ char *name;
+ unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
+ mask:8, /* The transceiver-present bit in Wn3_Config. */
+ next:8; /* The media type to try next. */
+ short wait; /* Time before we check media status. */
+} media_tbl[] = {
+ {
+ "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10}
+ , {
+ "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}
+ , {
+ "undefined", 0, 0x80, XCVR_10baseT, 10000}
+ , {
+ "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10}
+ , {
+ "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx,
+ (14 * HZ) / 10}
+ , {
+ "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}
+ , {
+ "MII", 0, 0x40, XCVR_10baseT, 3 * HZ}
+ , {
+ "undefined", 0, 0x01, XCVR_10baseT, 10000}
+ , {
+ "Default", 0, 0xFF, XCVR_10baseT, 10000}
+,};
+
+/* TILEG Modified to remove reference to dev */
+static int corkscrew_found_device(int ioaddr, int irq, int product_index,
+ int options, struct nic *nic);
+static int corkscrew_probe1(int ioaddr, int irq, int product_index,
+ struct nic *nic);
+
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Note: this is the only limit on the number of cards supported!! */
+static int options = -1;
+
+/* End Brought directly from 3c515.c by Becker */
+
+/**************************************************************************
+RESET - Reset adapter
+***************************************************************************/
+static void t515_reset(struct nic *nic)
+{
+ union wn3_config config;
+ int i;
+
+ /* Before initializing select the active media port. */
+ EL3WINDOW(3);
+ if (vp->full_duplex)
+ outb(0x20, nic->ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
+ config.i = inl(nic->ioaddr + Wn3_Config);
+
+ if (vp->media_override != 7) {
+ DBG ( "Media override to transceiver %d (%s).\n",
+ vp->media_override,
+ media_tbl[vp->media_override].name);
+ if_port = vp->media_override;
+ } else if (vp->autoselect) {
+ /* Find first available media type, starting with 100baseTx. */
+ if_port = 4;
+ while (!(vp->available_media & media_tbl[if_port].mask))
+ if_port = media_tbl[if_port].next;
+
+ DBG ( "Initial media type %s.\n",
+ media_tbl[if_port].name);
+ } else
+ if_port = vp->default_media;
+
+ config.u.xcvr = if_port;
+ outl(config.i, nic->ioaddr + Wn3_Config);
+
+ DBG ( "corkscrew_open() InternalConfig 0x%hX.\n",
+ config.i);
+
+ outw(TxReset, nic->ioaddr + EL3_CMD);
+ for (i = 20; i >= 0; i--)
+ if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+
+ outw(RxReset, nic->ioaddr + EL3_CMD);
+ /* Wait a few ticks for the RxReset command to complete. */
+ for (i = 20; i >= 0; i--)
+ if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+
+ outw(SetStatusEnb | 0x00, nic->ioaddr + EL3_CMD);
+
+#ifdef debug_3c515
+ EL3WINDOW(4);
+ DBG ( "FIXME: fix print for irq, not 9" );
+ DBG ( "corkscrew_open() irq %d media status 0x%hX.\n",
+ 9, inw(nic->ioaddr + Wn4_Media) );
+#endif
+
+ /* Set the station address and mask in window 2 each time opened. */
+ EL3WINDOW(2);
+ for (i = 0; i < 6; i++)
+ outb(nic->node_addr[i], nic->ioaddr + i);
+ for (; i < 12; i += 2)
+ outw(0, nic->ioaddr + i);
+
+ if (if_port == 3)
+ /* Start the thinnet transceiver. We should really wait 50ms... */
+ outw(StartCoax, nic->ioaddr + EL3_CMD);
+ EL3WINDOW(4);
+ outw((inw(nic->ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
+ media_tbl[if_port].media_bits, nic->ioaddr + Wn4_Media);
+
+ /* Switch to the stats window, and clear all stats by reading. */
+/* outw(StatsDisable, nic->ioaddr + EL3_CMD);*/
+ EL3WINDOW(6);
+ for (i = 0; i < 10; i++)
+ inb(nic->ioaddr + i);
+ inw(nic->ioaddr + 10);
+ inw(nic->ioaddr + 12);
+ /* New: On the Vortex we must also clear the BadSSD counter. */
+ EL3WINDOW(4);
+ inb(nic->ioaddr + 12);
+ /* ..and on the Boomerang we enable the extra statistics bits. */
+ outw(0x0040, nic->ioaddr + Wn4_NetDiag);
+
+ /* Switch to register set 7 for normal use. */
+ EL3WINDOW(7);
+
+ /* Temporarily left in place. If these FIXMEs are printed
+ it meand that special logic for that card may need to be added
+ see Becker's 3c515.c driver */
+ if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+ printf("FIXME: Is this if necessary");
+ vp->cur_rx = vp->dirty_rx = 0;
+ DBG ( " Filling in the Rx ring.\n" );
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ printf("FIXME: Is this if necessary");
+ }
+ }
+ if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
+ vp->cur_tx = vp->dirty_tx = 0;
+ outb(PKT_BUF_SZ >> 8, nic->ioaddr + TxFreeThreshold); /* Room for a packet. */
+ /* Clear the Tx ring. */
+ for (i = 0; i < TX_RING_SIZE; i++)
+ vp->tx_skbuff[i] = NULL;
+ outl(0, nic->ioaddr + DownListPtr);
+ }
+ /* Set receiver mode: presumably accept b-case and phys addr only. */
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+ nic->ioaddr + EL3_CMD);
+
+ outw(RxEnable, nic->ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, nic->ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
+ (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+ (vp->full_bus_master_rx ? UpComplete : RxComplete) |
+ (vp->bus_master ? DMADone : 0), nic->ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ nic->ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+ | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
+ nic->ioaddr + EL3_CMD);
+
+}
+
+/**************************************************************************
+POLL - Wait for a frame
+***************************************************************************/
+static int t515_poll(struct nic *nic, int retrieve)
+{
+ short status, cst;
+ register short rx_fifo;
+
+ cst = inw(nic->ioaddr + EL3_STATUS);
+
+ if ((cst & RxComplete) == 0) {
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ nic->ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete |
+ StatsFull | (vp->
+ bus_master ? DMADone : 0) | UpComplete |
+ DownComplete, nic->ioaddr + EL3_CMD);
+ return 0;
+ }
+ status = inw(nic->ioaddr + RxStatus);
+
+ if (status & RxDError) {
+ printf("RxDError\n");
+ outw(RxDiscard, nic->ioaddr + EL3_CMD);
+ return 0;
+ }
+
+ rx_fifo = status & RX_BYTES_MASK;
+ if (rx_fifo == 0)
+ return 0;
+
+ if ( ! retrieve ) return 1;
+
+ DBG ( "[l=%d", rx_fifo );
+ insw(nic->ioaddr + RX_FIFO, nic->packet, rx_fifo / 2);
+ if (rx_fifo & 1)
+ nic->packet[rx_fifo - 1] = inb(nic->ioaddr + RX_FIFO);
+ nic->packetlen = rx_fifo;
+
+ while (1) {
+ status = inw(nic->ioaddr + RxStatus);
+ DBG ( "0x%hX*", status );
+ rx_fifo = status & RX_BYTES_MASK;
+
+ if (rx_fifo > 0) {
+ insw(nic->ioaddr + RX_FIFO, nic->packet + nic->packetlen,
+ rx_fifo / 2);
+ if (rx_fifo & 1)
+ nic->packet[nic->packetlen + rx_fifo - 1] =
+ inb(nic->ioaddr + RX_FIFO);
+ nic->packetlen += rx_fifo;
+ DBG ( "+%d", rx_fifo );
+ }
+ if ((status & RxComplete) == 0) {
+ DBG ( "=%d", nic->packetlen );
+ break;
+ }
+ udelay(1000);
+ }
+
+ /* acknowledge reception of packet */
+ outw(RxDiscard, nic->ioaddr + EL3_CMD);
+ while (inw(nic->ioaddr + EL3_STATUS) & CmdInProgress);
+#ifdef debug_3c515
+ {
+ unsigned short type = 0;
+ type = (nic->packet[12] << 8) | nic->packet[13];
+ if (nic->packet[0] + nic->packet[1] + nic->packet[2] +
+ nic->packet[3] + nic->packet[4] + nic->packet[5] ==
+ 0xFF * ETH_ALEN)
+ DBG ( ",t=0x%hX,b]", type );
+ else
+ DBG ( ",t=0x%hX]", type );
+ }
+#endif
+
+ return 1;
+}
+
+/*************************************************************************
+ 3Com 515 - specific routines
+**************************************************************************/
+static char padmap[] = {
+ 0, 3, 2, 1
+};
+/**************************************************************************
+TRANSMIT - Transmit a frame
+***************************************************************************/
+static void t515_transmit(struct nic *nic, const char *d, /* Destination */
+ unsigned int t, /* Type */
+ unsigned int s, /* size */
+ const char *p)
+{ /* Packet */
+ register int len;
+ int pad;
+ int status;
+
+ DBG ( "{l=%d,t=0x%hX}", s + ETH_HLEN, t );
+
+ /* swap bytes of type */
+ t = htons(t);
+
+ len = s + ETH_HLEN; /* actual length of packet */
+ pad = padmap[len & 3];
+
+ /*
+ * The 3c515 automatically pads short packets to minimum ethernet length,
+ * but we drop packets that are too large. Perhaps we should truncate
+ * them instead?
+ Copied from 3c595. Is this true for the 3c515?
+ */
+ if (len + pad > ETH_FRAME_LEN) {
+ return;
+ }
+ /* drop acknowledgements */
+ while ((status = inb(nic->ioaddr + TxStatus)) & TxComplete) {
+ /*if(status & (TXS_UNDERRUN|0x88|TXS_STATUS_OVERFLOW)) { */
+ outw(TxReset, nic->ioaddr + EL3_CMD);
+ outw(TxEnable, nic->ioaddr + EL3_CMD);
+/* } */
+
+ outb(0x0, nic->ioaddr + TxStatus);
+ }
+
+ while (inw(nic->ioaddr + TxFree) < len + pad + 4) {
+ /* no room in FIFO */
+ }
+
+ outw(len, nic->ioaddr + TX_FIFO);
+ outw(0x0, nic->ioaddr + TX_FIFO); /* Second dword meaningless */
+
+ /* write packet */
+ outsw(nic->ioaddr + TX_FIFO, d, ETH_ALEN / 2);
+ outsw(nic->ioaddr + TX_FIFO, nic->node_addr, ETH_ALEN / 2);
+ outw(t, nic->ioaddr + TX_FIFO);
+ outsw(nic->ioaddr + TX_FIFO, p, s / 2);
+
+ if (s & 1)
+ outb(*(p + s - 1), nic->ioaddr + TX_FIFO);
+
+ while (pad--)
+ outb(0, nic->ioaddr + TX_FIFO); /* Padding */
+
+ /* wait for Tx complete */
+ while ((inw(nic->ioaddr + EL3_STATUS) & CmdInProgress) != 0);
+}
+
+/**************************************************************************
+DISABLE - Turn off ethernet interface
+***************************************************************************/
+static void t515_disable ( struct nic *nic,
+ struct isapnp_device *isapnp ) {
+
+ t515_reset(nic);
+
+ /* This is a hack. Since ltsp worked on my
+ system without any disable functionality I
+ have no way to determine if this works */
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, nic->ioaddr + EL3_CMD);
+ outw(TxDisable, nic->ioaddr + EL3_CMD);
+
+ if (if_port == XCVR_10base2)
+ /* Turn off thinnet power. Green! */
+ outw(StopCoax, nic->ioaddr + EL3_CMD);
+
+
+ outw(SetIntrEnb | 0x0000, nic->ioaddr + EL3_CMD);
+
+ deactivate_isapnp_device ( isapnp );
+ return;
+}
+
+static void t515_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+ switch ( action ) {
+ case DISABLE :
+ break;
+ case ENABLE :
+ break;
+ case FORCE :
+ break;
+ }
+}
+
+static struct nic_operations t515_operations = {
+ .connect = dummy_connect,
+ .poll = t515_poll,
+ .transmit = t515_transmit,
+ .irq = t515_irq,
+
+};
+
+/**************************************************************************
+PROBE - Look for an adapter, this routine's visible to the outside
+You should omit the last argument struct pci_device * for a non-PCI NIC
+***************************************************************************/
+static int t515_probe ( struct nic *nic, struct isapnp_device *isapnp ) {
+
+ /* Direct copy from Beckers 3c515.c removing any ISAPNP sections */
+
+ nic->ioaddr = isapnp->ioaddr;
+ nic->irqno = isapnp->irqno;
+ activate_isapnp_device ( isapnp );
+
+ /* Check the resource configuration for a matching ioaddr. */
+ if ((unsigned)(inw(nic->ioaddr + 0x2002) & 0x1f0)
+ != (nic->ioaddr & 0x1f0)) {
+ DBG ( "3c515 ioaddr mismatch\n" );
+ return 0;
+ }
+
+ /* Verify by reading the device ID from the EEPROM. */
+ {
+ int timer;
+ outw(EEPROM_Read + 7, nic->ioaddr + Wn0EepromCmd);
+ /* Pause for at least 162 us. for the read to take place. */
+ for (timer = 4; timer >= 0; timer--) {
+ t3c515_wait(1);
+ if ((inw(nic->ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+ break;
+ }
+ if (inw(nic->ioaddr + Wn0EepromData) != 0x6d50) {
+ DBG ( "3c515 read incorrect vendor ID from EEPROM" );
+ return 0;
+ }
+
+ }
+ DBG ( "3c515 Resource configuration register 0x%X, DCR 0x%hX.\n",
+ inl(nic->ioaddr + 0x2002), inw(nic->ioaddr + 0x2000) );
+ corkscrew_found_device(nic->ioaddr, nic->irqno, CORKSCREW_ID,
+ options, nic);
+
+ t515_reset(nic);
+ nic->nic_op = &t515_operations;
+ return 1;
+}
+
+static int
+corkscrew_found_device(int ioaddr, int irq,
+ int product_index, int options, struct nic *nic)
+{
+ /* Direct copy from Becker 3c515.c with unnecessary parts removed */
+ vp->product_name = "3c515";
+ vp->options = options;
+ if (options >= 0) {
+ vp->media_override =
+ ((options & 7) == 2) ? 0 : options & 7;
+ vp->full_duplex = (options & 8) ? 1 : 0;
+ vp->bus_master = (options & 16) ? 1 : 0;
+ } else {
+ vp->media_override = 7;
+ vp->full_duplex = 0;
+ vp->bus_master = 0;
+ }
+
+ corkscrew_probe1(ioaddr, irq, product_index, nic);
+ return 0;
+}
+
+static int
+corkscrew_probe1(int ioaddr, int irq, int product_index __unused,
+ struct nic *nic)
+{
+ unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
+ int i;
+
+ printf("3Com %s at 0x%hX, ", vp->product_name, ioaddr);
+
+ /* Read the station address from the EEPROM. */
+ EL3WINDOW(0);
+ for (i = 0; i < 0x18; i++) {
+ short *phys_addr = (short *) nic->node_addr;
+ int timer;
+ outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
+ /* Pause for at least 162 us. for the read to take place. */
+ for (timer = 4; timer >= 0; timer--) {
+ t3c515_wait(1);
+ if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+ break;
+ }
+ eeprom[i] = inw(ioaddr + Wn0EepromData);
+ DBG ( "Value %d: %hX ", i, eeprom[i] );
+ checksum ^= eeprom[i];
+ if (i < 3)
+ phys_addr[i] = htons(eeprom[i]);
+ }
+ checksum = (checksum ^ (checksum >> 8)) & 0xff;
+ if (checksum != 0x00)
+ printf(" ***INVALID CHECKSUM 0x%hX*** ", checksum);
+
+ DBG ( "%s", eth_ntoa ( nic->node_addr ) );
+
+ if (eeprom[16] == 0x11c7) { /* Corkscrew */
+
+ }
+ printf(", IRQ %d\n", irq);
+ /* Tell them about an invalid IRQ. */
+ if ( (irq <= 0 || irq > 15) ) {
+ DBG (" *** Warning: this IRQ is unlikely to work! ***\n" );
+ }
+
+ {
+ char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
+ union wn3_config config;
+ EL3WINDOW(3);
+ vp->available_media = inw(ioaddr + Wn3_Options);
+ config.i = inl(ioaddr + Wn3_Config);
+ DBG ( " Internal config register is %4.4x, "
+ "transceivers 0x%hX.\n",
+ config.i, inw(ioaddr + Wn3_Options) );
+ printf
+ (" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ 8 << config.u.ram_size,
+ config.u.ram_width ? "word" : "byte",
+ ram_split[config.u.ram_split],
+ config.u.autoselect ? "autoselect/" : "",
+ media_tbl[config.u.xcvr].name);
+ if_port = config.u.xcvr;
+ vp->default_media = config.u.xcvr;
+ vp->autoselect = config.u.autoselect;
+ }
+ if (vp->media_override != 7) {
+ printf(" Media override to transceiver type %d (%s).\n",
+ vp->media_override,
+ media_tbl[vp->media_override].name);
+ if_port = vp->media_override;
+ }
+
+ vp->capabilities = eeprom[16];
+ vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
+ /* Rx is broken at 10mbps, so we always disable it. */
+ /* vp->full_bus_master_rx = 0; */
+ vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
+
+ return 0;
+}
+
+static struct isapnp_device_id t515_adapters[] = {
+ { "3c515 (ISAPnP)", ISAPNP_VENDOR('T','C','M'), 0x5051 },
+};
+
+ISAPNP_DRIVER ( t515_driver, t515_adapters );
+
+DRIVER ( "3c515", nic_driver, isapnp_driver, t515_driver,
+ t515_probe, t515_disable );
+
+ISA_ROM ( "3c515", "3c515 Fast EtherLink ISAPnP" );