1 files changed, 0 insertions, 185 deletions
diff --git a/qemu/roms/ipxe/src/config/general.h b/qemu/roms/ipxe/src/config/general.h
deleted file mode 100644
index ee15f6bf1..000000000
--- a/qemu/roms/ipxe/src/config/general.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef CONFIG_GENERAL_H
-#define CONFIG_GENERAL_H
-
-/** @file
- *
- * General configuration
- *
- */
-
-FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
-
-#include <config/defaults.h>
-
-/*
- * Banner timeout configuration
- *
- * This controls the timeout for the "Press Ctrl-B for the iPXE
- * command line" banner displayed when iPXE starts up.  The value is
- * specified in tenths of a second for which the banner should appear.
- * A value of 0 disables the banner.
- *
- * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
- * banner displayed only by ROM builds of iPXE during POST.  This
- * defaults to being twice the length of BANNER_TIMEOUT, to allow for
- * BIOSes that switch video modes immediately before calling the
- * initialisation vector, thus rendering the banner almost invisible
- * to the user.
- */
-#define BANNER_TIMEOUT		20
-#define ROM_BANNER_TIMEOUT	( 2 * BANNER_TIMEOUT )
-
-/*
- * Network protocols
- *
- */
-
-#define	NET_PROTO_IPV4		/* IPv4 protocol */
-#undef	NET_PROTO_IPV6		/* IPv6 protocol */
-#undef	NET_PROTO_FCOE		/* Fibre Channel over Ethernet protocol */
-#define	NET_PROTO_STP		/* Spanning Tree protocol */
-
-/*
- * PXE support
- *
- */
-//#undef	PXE_STACK		/* PXE stack in iPXE - you want this! */
-//#undef	PXE_MENU		/* PXE menu booting */
-
-/*
- * Download protocols
- *
- */
-
-#define	DOWNLOAD_PROTO_TFTP	/* Trivial File Transfer Protocol */
-#define	DOWNLOAD_PROTO_HTTP	/* Hypertext Transfer Protocol */
-#undef	DOWNLOAD_PROTO_HTTPS	/* Secure Hypertext Transfer Protocol */
-#undef	DOWNLOAD_PROTO_FTP	/* File Transfer Protocol */
-#undef	DOWNLOAD_PROTO_SLAM	/* Scalable Local Area Multicast */
-#undef	DOWNLOAD_PROTO_NFS	/* Network File System Protocol */
-
-/*
- * SAN boot protocols
- *
- */
-
-//#undef	SANBOOT_PROTO_ISCSI	/* iSCSI protocol */
-//#undef	SANBOOT_PROTO_AOE	/* AoE protocol */
-//#undef	SANBOOT_PROTO_IB_SRP	/* Infiniband SCSI RDMA protocol */
-//#undef	SANBOOT_PROTO_FCP	/* Fibre Channel protocol */
-//#undef	SANBOOT_PROTO_HTTP	/* HTTP SAN protocol */
-
-/*
- * HTTP extensions
- *
- */
-#define HTTP_AUTH_BASIC		/* Basic authentication */
-#define HTTP_AUTH_DIGEST	/* Digest authentication */
-//#define HTTP_ENC_PEERDIST	/* PeerDist content encoding */
-
-/*
- * 802.11 cryptosystems and handshaking protocols
- *
- */
-#define	CRYPTO_80211_WEP	/* WEP encryption (deprecated and insecure!) */
-#define	CRYPTO_80211_WPA	/* WPA Personal, authenticating with passphrase */
-#define	CRYPTO_80211_WPA2	/* Add support for stronger WPA cryptography */
-
-/*
- * Name resolution modules
- *
- */
-
-#define	DNS_RESOLVER		/* DNS resolver */
-
-/*
- * Image types
- *
- * Etherboot supports various image formats.  Select whichever ones
- * you want to use.
- *
- */
-//#define	IMAGE_NBI		/* NBI image support */
-//#define	IMAGE_ELF		/* ELF image support */
-//#define	IMAGE_MULTIBOOT		/* MultiBoot image support */
-//#define	IMAGE_PXE		/* PXE image support */
-//#define	IMAGE_SCRIPT		/* iPXE script image support */
-//#define	IMAGE_BZIMAGE		/* Linux bzImage image support */
-//#define	IMAGE_COMBOOT		/* SYSLINUX COMBOOT image support */
-//#define	IMAGE_EFI		/* EFI image support */
-//#define	IMAGE_SDI		/* SDI image support */
-//#define	IMAGE_PNM		/* PNM image support */
-//#define	IMAGE_PNG		/* PNG image support */
-
-/*
- * Command-line commands to include
- *
- */
-#define	AUTOBOOT_CMD		/* Automatic booting */
-#define	NVO_CMD			/* Non-volatile option storage commands */
-#define	CONFIG_CMD		/* Option configuration console */
-#define	IFMGMT_CMD		/* Interface management commands */
-#define	IWMGMT_CMD		/* Wireless interface management commands */
-#define FCMGMT_CMD		/* Fibre Channel management commands */
-#define	ROUTE_CMD		/* Routing table management commands */
-#define IMAGE_CMD		/* Image management commands */
-#define DHCP_CMD		/* DHCP management commands */
-#define SANBOOT_CMD		/* SAN boot commands */
-#define MENU_CMD		/* Menu commands */
-#define LOGIN_CMD		/* Login command */
-#define SYNC_CMD		/* Sync command */
-//#define NSLOOKUP_CMD		/* DNS resolving command */
-//#define TIME_CMD		/* Time commands */
-//#define DIGEST_CMD		/* Image crypto digest commands */
-//#define LOTEST_CMD		/* Loopback testing commands */
-//#define VLAN_CMD		/* VLAN commands */
-//#define PXE_CMD		/* PXE commands */
-//#define REBOOT_CMD		/* Reboot command */
-//#define POWEROFF_CMD		/* Power off command */
-//#define IMAGE_TRUST_CMD	/* Image trust management commands */
-//#define PCI_CMD		/* PCI commands */
-//#define PARAM_CMD		/* Form parameter commands */
-//#define NEIGHBOUR_CMD		/* Neighbour management commands */
-//#define PING_CMD		/* Ping command */
-//#define CONSOLE_CMD		/* Console command */
-//#define IPSTAT_CMD		/* IP statistics commands */
-//#define PROFSTAT_CMD		/* Profiling commands */
-
-/*
- * ROM-specific options
- *
- */
-#undef	NONPNP_HOOK_INT19	/* Hook INT19 on non-PnP BIOSes */
-#define	AUTOBOOT_ROM_FILTER	/* Autoboot only devices matching our ROM */
-
-/*
- * Error message tables to include
- *
- */
-#undef	ERRMSG_80211		/* All 802.11 error descriptions (~3.3kb) */
-
-/*
- * Obscure configuration options
- *
- * You probably don't need to touch these.
- *
- */
-
-#undef	BUILD_SERIAL		/* Include an automatic build serial
-				 * number.  Add "bs" to the list of
-				 * make targets.  For example:
-				 * "make bin/rtl8139.dsk bs" */
-#undef	BUILD_ID		/* Include a custom build ID string,
-				 * e.g "test-foo" */
-#undef	NULL_TRAP		/* Attempt to catch NULL function calls */
-#undef	GDBSERIAL		/* Remote GDB debugging over serial */
-#undef	GDBUDP			/* Remote GDB debugging over UDP
-				 * (both may be set) */
-//#define EFI_DOWNGRADE_UX	/* Downgrade UEFI user experience */
-
-#include <config/named.h>
-#include NAMED_CONFIG(general.h)
-#include <config/local/general.h>
-#include LOCAL_NAMED_CONFIG(general.h)
-
-#endif /* CONFIG_GENERAL_H */