summaryrefslogtreecommitdiffstats
path: root/qemu/roms/ipxe/src/config/general.h
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/ipxe/src/config/general.h')
-rw-r--r--qemu/roms/ipxe/src/config/general.h190
1 files changed, 190 insertions, 0 deletions
diff --git a/qemu/roms/ipxe/src/config/general.h b/qemu/roms/ipxe/src/config/general.h
new file mode 100644
index 000000000..539203457
--- /dev/null
+++ b/qemu/roms/ipxe/src/config/general.h
@@ -0,0 +1,190 @@
+#ifndef CONFIG_GENERAL_H
+#define CONFIG_GENERAL_H
+
+/** @file
+ *
+ * General configuration
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <config/defaults.h>
+
+/*
+ * Branding
+ *
+ * Vendors may use these strings to add their own branding to iPXE.
+ * PRODUCT_NAME is displayed prior to any iPXE branding in startup
+ * messages, and PRODUCT_SHORT_NAME is used where a brief product
+ * label is required (e.g. in BIOS boot selection menus).
+ *
+ * To minimise end-user confusion, it's probably a good idea to either
+ * make PRODUCT_SHORT_NAME a substring of PRODUCT_NAME or leave it as
+ * "iPXE".
+ *
+ */
+#define PRODUCT_NAME ""
+#define PRODUCT_SHORT_NAME "iPXE"
+
+/*
+ * Banner timeout configuration
+ *
+ * This controls the timeout for the "Press Ctrl-B for the iPXE
+ * command line" banner displayed when iPXE starts up. The value is
+ * specified in tenths of a second for which the banner should appear.
+ * A value of 0 disables the banner.
+ *
+ * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
+ * banner displayed only by ROM builds of iPXE during POST. This
+ * defaults to being twice the length of BANNER_TIMEOUT, to allow for
+ * BIOSes that switch video modes immediately before calling the
+ * initialisation vector, thus rendering the banner almost invisible
+ * to the user.
+ */
+#define BANNER_TIMEOUT 20
+#define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT )
+
+/*
+ * Network protocols
+ *
+ */
+
+#define NET_PROTO_IPV4 /* IPv4 protocol */
+#undef NET_PROTO_IPV6 /* IPv6 protocol */
+#undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */
+
+/*
+ * PXE support
+ *
+ */
+//#undef PXE_STACK /* PXE stack in iPXE - you want this! */
+//#undef PXE_MENU /* PXE menu booting */
+
+/*
+ * Download protocols
+ *
+ */
+
+#define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */
+#define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */
+#undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */
+#undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */
+#undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */
+#undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */
+
+/*
+ * SAN boot protocols
+ *
+ */
+
+//#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */
+//#undef SANBOOT_PROTO_AOE /* AoE protocol */
+//#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */
+//#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */
+
+/*
+ * 802.11 cryptosystems and handshaking protocols
+ *
+ */
+#define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */
+#define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */
+#define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */
+
+/*
+ * Name resolution modules
+ *
+ */
+
+#define DNS_RESOLVER /* DNS resolver */
+
+/*
+ * Image types
+ *
+ * Etherboot supports various image formats. Select whichever ones
+ * you want to use.
+ *
+ */
+//#define IMAGE_NBI /* NBI image support */
+//#define IMAGE_ELF /* ELF image support */
+//#define IMAGE_MULTIBOOT /* MultiBoot image support */
+//#define IMAGE_PXE /* PXE image support */
+//#define IMAGE_SCRIPT /* iPXE script image support */
+//#define IMAGE_BZIMAGE /* Linux bzImage image support */
+//#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */
+//#define IMAGE_EFI /* EFI image support */
+//#define IMAGE_SDI /* SDI image support */
+//#define IMAGE_PNM /* PNM image support */
+//#define IMAGE_PNG /* PNG image support */
+
+/*
+ * Command-line commands to include
+ *
+ */
+#define AUTOBOOT_CMD /* Automatic booting */
+#define NVO_CMD /* Non-volatile option storage commands */
+#define CONFIG_CMD /* Option configuration console */
+#define IFMGMT_CMD /* Interface management commands */
+#define IWMGMT_CMD /* Wireless interface management commands */
+#define FCMGMT_CMD /* Fibre Channel management commands */
+#define ROUTE_CMD /* Routing table management commands */
+#define IMAGE_CMD /* Image management commands */
+#define DHCP_CMD /* DHCP management commands */
+#define SANBOOT_CMD /* SAN boot commands */
+#define MENU_CMD /* Menu commands */
+#define LOGIN_CMD /* Login command */
+#define SYNC_CMD /* Sync command */
+//#define NSLOOKUP_CMD /* DNS resolving command */
+//#define TIME_CMD /* Time commands */
+//#define DIGEST_CMD /* Image crypto digest commands */
+//#define LOTEST_CMD /* Loopback testing commands */
+//#define VLAN_CMD /* VLAN commands */
+//#define PXE_CMD /* PXE commands */
+//#define REBOOT_CMD /* Reboot command */
+//#define POWEROFF_CMD /* Power off command */
+//#define IMAGE_TRUST_CMD /* Image trust management commands */
+//#define PCI_CMD /* PCI commands */
+//#define PARAM_CMD /* Form parameter commands */
+//#define NEIGHBOUR_CMD /* Neighbour management commands */
+//#define PING_CMD /* Ping command */
+//#define CONSOLE_CMD /* Console command */
+//#define IPSTAT_CMD /* IP statistics commands */
+//#define PROFSTAT_CMD /* Profiling commands */
+
+/*
+ * ROM-specific options
+ *
+ */
+#undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */
+
+/*
+ * Error message tables to include
+ *
+ */
+#undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */
+
+/*
+ * Obscure configuration options
+ *
+ * You probably don't need to touch these.
+ *
+ */
+
+#define NETDEV_DISCARD_RATE 0 /* Drop every N packets (0=>no drop) */
+#undef BUILD_SERIAL /* Include an automatic build serial
+ * number. Add "bs" to the list of
+ * make targets. For example:
+ * "make bin/rtl8139.dsk bs" */
+#undef BUILD_ID /* Include a custom build ID string,
+ * e.g "test-foo" */
+#undef NULL_TRAP /* Attempt to catch NULL function calls */
+#undef GDBSERIAL /* Remote GDB debugging over serial */
+#undef GDBUDP /* Remote GDB debugging over UDP
+ * (both may be set) */
+
+#include <config/named.h>
+#include NAMED_CONFIG(general.h)
+#include <config/local/general.h>
+#include LOCAL_NAMED_CONFIG(general.h)
+
+#endif /* CONFIG_GENERAL_H */