1 files changed, 0 insertions, 87 deletions
diff --git a/qemu/roms/ipxe/src/config/dhcp.h b/qemu/roms/ipxe/src/config/dhcp.h
deleted file mode 100644
index 49fe16b92..000000000
--- a/qemu/roms/ipxe/src/config/dhcp.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef CONFIG_DHCP_H
-#define CONFIG_DHCP_H
-
-/** @file
- *
- * DHCP configuration
- *
- */
-
-FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
-
-#include <config/defaults.h>
-
-/*
- * DHCP and PXE Boot Server timeout parameters
- *
- * Initial and final timeout for DHCP discovery
- *
- * The PXE spec indicates discover request are sent 4 times, with
- * timeouts of 4, 8, 16, 32 seconds.  iPXE by default uses 1, 2, 4, 8.
- */
-#define DHCP_DISC_START_TIMEOUT_SEC	1
-#define DHCP_DISC_END_TIMEOUT_SEC	10
-//#define DHCP_DISC_START_TIMEOUT_SEC	4	/* as per PXE spec */
-//#define DHCP_DISC_END_TIMEOUT_SEC	32	/* as per PXE spec */
-
-/*
- * ProxyDHCP offers are given precedence by continue to wait for them
- * after a valid DHCPOFFER is received.  We'll wait through this
- * timeout for it.  The PXE spec indicates waiting through the 4 & 8
- * second timeouts, iPXE by default stops after 2.
- */
-#define DHCP_DISC_PROXY_TIMEOUT_SEC	2
-//#define DHCP_DISC_PROXY_TIMEOUT_SEC	11	/* as per PXE spec */
-
-/*
- * Per the PXE spec, requests are also tried 4 times, but at timeout
- * intervals of 1, 2, 3, 4 seconds.  To adapt this to an exponential
- * backoff timer, we can either do 1, 2, 4, 8, ie. 4 retires with a
- * longer interval or start at 0 (0.25s) for 0.25, 0.5, 1, 2, 4,
- * ie. one extra try and shorter initial timeouts.  iPXE by default
- * does a combination of both, starting at 0 and going through the 8
- * second timeout.
- */
-#define DHCP_REQ_START_TIMEOUT_SEC	0
-#define DHCP_REQ_END_TIMEOUT_SEC	10
-//#define DHCP_REQ_END_TIMEOUT_SEC	4	/* as per PXE spec */
-
-/*
- * A ProxyDHCP offer without PXE options also goes through a request
- * phase using these same parameters, but note the early break below.
- */
-#define DHCP_PROXY_START_TIMEOUT_SEC	0
-#define DHCP_PROXY_END_TIMEOUT_SEC	10
-//#define DHCP_PROXY_END_TIMEOUT_SEC	8	/* as per PXE spec */
-
-/*
- * A ProxyDHCP request timeout should not induce a failure condition,
- * so we always want to break before the above set of timers expire.
- * The iPXE default value of 2 breaks at the first timeout after 2
- * seconds, which will be after the 2 second timeout.
- */
-#define DHCP_REQ_PROXY_TIMEOUT_SEC	2
-//#define DHCP_REQ_PROXY_TIMEOUT_SEC	7	/* as per PXE spec */
-
-/*
- * Per the PXE spec, a PXE boot server request is also be retried 4
- * times at timeouts of 1, 2, 3, 4.  iPXE uses the same timeouts as
- * discovery, 1, 2, 4, 8, but will move on to the next server if
- * available after an elapsed time greater than 3 seconds, therefore
- * effectively only sending 3 tries at timeouts of 1, 2, 4.
- */
-#define PXEBS_START_TIMEOUT_SEC		1
-#define PXEBS_END_TIMEOUT_SEC		10
-//#define PXEBS_START_TIMEOUT_SEC	0	/* as per PXE spec */
-//#define PXEBS_END_TIMEOUT_SEC		8	/* as per PXE spec */
-
-/*
- * Increment to the next PXE Boot server, if available, after this
- * this much time has elapsed.
- */
-#define PXEBS_MAX_TIMEOUT_SEC		3
-//#define PXEBS_MAX_TIMEOUT_SEC		7	/* as per PXE spec */
-
-#include <config/local/dhcp.h>
-
-#endif /* CONFIG_DHCP_H */