summaryrefslogtreecommitdiffstats
path: root/qemu/roms/ipxe/contrib/vm/bochsrc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/ipxe/contrib/vm/bochsrc.txt')
-rw-r--r--qemu/roms/ipxe/contrib/vm/bochsrc.txt1131
1 files changed, 1131 insertions, 0 deletions
diff --git a/qemu/roms/ipxe/contrib/vm/bochsrc.txt b/qemu/roms/ipxe/contrib/vm/bochsrc.txt
new file mode 100644
index 000000000..d0f12504b
--- /dev/null
+++ b/qemu/roms/ipxe/contrib/vm/bochsrc.txt
@@ -0,0 +1,1131 @@
+# You may now use double quotes around pathnames, in case
+# your pathname includes spaces.
+
+#=======================================================================
+# PLUGIN_CTRL:
+# Controls the presence of optional device plugins. These plugins are loaded
+# directly with this option and some of them install a config option that is
+# only available when the plugin device is loaded. The value "1" means to load
+# the plugin and "0" will unload it (if loaded before).
+# These plugins are currently supported: 'biosdev', 'e1000', 'es1370',
+# 'extfpuirq', 'gameport', 'iodebug', 'ne2k', 'parallel', 'pcidev', 'pcipnic',
+# 'sb16', 'serial', 'speaker', 'unmapped', 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
+#=======================================================================
+plugin_ctrl: unmapped=1, biosdev=1, speaker=1, e1000=1, parallel=1, serial=1
+
+#=======================================================================
+# CONFIG_INTERFACE
+#
+# The configuration interface is a series of menus or dialog boxes that
+# allows you to change all the settings that control Bochs's behavior.
+# Depending on the platform there are up to 3 choices of configuration
+# interface: a text mode version called "textconfig" and two graphical versions
+# called "win32config" and "wx". The text mode version uses stdin/stdout and
+# is always compiled in, unless Bochs is compiled for wx only. The choice
+# "win32config" is only available on win32 and it is the default there.
+# The choice "wx" is only available when you use "--with-wx" on the configure
+# command. If you do not write a config_interface line, Bochs will
+# choose a default for you.
+#
+# NOTE: if you use the "wx" configuration interface, you must also use
+# the "wx" display library.
+#=======================================================================
+#config_interface: textconfig
+#config_interface: win32config
+#config_interface: wx
+
+#=======================================================================
+# DISPLAY_LIBRARY
+#
+# The display library is the code that displays the Bochs VGA screen. Bochs
+# has a selection of about 10 different display library implementations for
+# different platforms. If you run configure with multiple --with-* options,
+# the display_library command lets you choose which one you want to run with.
+# If you do not write a display_library line, Bochs will choose a default for
+# you.
+#
+# The choices are:
+# x use X windows interface, cross platform
+# win32 use native win32 libraries
+# carbon use Carbon library (for MacOS X)
+# macintosh use MacOS pre-10
+# amigaos use native AmigaOS libraries
+# sdl use SDL library, cross platform
+# svga use SVGALIB library for Linux, allows graphics without X11
+# term text only, uses curses/ncurses library, cross platform
+# rfb provides an interface to AT&T's VNC viewer, cross platform
+# wx use wxWidgets library, cross platform
+# nogui no display at all
+#
+# NOTE: if you use the "wx" configuration interface, you must also use
+# the "wx" display library.
+#
+# Specific options:
+# Some display libraries now support specific options to control their
+# behaviour. These options are supported by more than one display library:
+#
+# "gui_debug" - use GTK debugger gui (sdl, x) / Win32 debugger gui (win32)
+# "hideIPS" - disable IPS output in status bar (sdl, wx, x)
+# "nokeyrepeat" - turn off host keyboard repeat (sdl, win32, x)
+#
+# See the examples below for other currently supported options.
+#=======================================================================
+#display_library: amigaos
+#display_library: carbon
+#display_library: macintosh
+#display_library: nogui
+#display_library: rfb, options="timeout=60" # time to wait for client
+#display_library: sdl, options="fullscreen" # startup in fullscreen mode
+#display_library: term
+#display_library: win32
+#display_library: wx
+#display_library: x
+
+#=======================================================================
+# ROMIMAGE:
+# The ROM BIOS controls what the PC does when it first powers on.
+# Normally, you can use a precompiled BIOS in the source or binary
+# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
+# starting at address 0xf0000, and it is exactly 64k long. Another option
+# is 128k BIOS which is loaded at address 0xe0000.
+# You can also use the environment variable $BXSHARE to specify the
+# location of the BIOS.
+# The usage of external large BIOS images (up to 512k) at memory top is
+# now supported, but we still recommend to use the BIOS distributed with
+# Bochs. The start address optional, since it can be calculated from image size.
+#=======================================================================
+#romimage: file=$BXSHARE/BIOS-bochs-latest
+#romimage: file=bios/seabios-1.6.3.bin
+#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
+romimage: file=bochs/bios/BIOS-bochs-latest
+
+#=======================================================================
+# CPU:
+# This defines cpu-related parameters inside Bochs:
+#
+# MODEL:
+# Selects CPU configuration to emulate from pre-defined list of all
+# supported configurations. When this option is used, the CPUID option
+# has no effect anymore.
+#
+# CPU configurations that can be selected:
+# -----------------------------------------------------------------
+# pentium_mmx Intel Pentium MMX
+# amd_k6_2_chomper AMD-K6(tm) 3D processor (Chomper)
+# p2_klamath Intel Pentium II (Klamath)
+# p3_katmai Intel Pentium III (Katmai)
+# p4_willamette Intel(R) Pentium(R) 4 (Willamette)
+# core_duo_t2400_yonah Intel(R) Core(TM) Duo CPU T2400 (Yonah)
+# atom_n270 Intel(R) Atom(TM) CPU N270
+# athlon64_clawhammer AMD Athlon(tm) 64 Processor 2800+ (Clawhammer)
+# athlon64_venice AMD Athlon(tm) 64 Processor 3000+ (Venice)
+# turion64_tyler AMD Turion(tm) 64 X2 Mobile TL-60 (Tyler)
+# phenom_8650_toliman AMD Phenom X3 8650 (Toliman)
+# p4_prescott_celeron_336 Intel(R) Celeron(R) 336 (Prescott)
+# core2_penryn_t9600 Intel Mobile Core 2 Duo T9600 (Penryn)
+# corei5_lynnfield_750 Intel(R) Core(TM) i5 750 (Lynnfield)
+# corei5_arrandale_m520 Intel(R) Core(TM) i5 M 520 (Arrandale)
+# corei7_sandy_bridge_2600k Intel(R) Core(TM) i7-2600K (Sandy Bridge)
+# corei7_ivy_bridge_3770k Intel(R) Core(TM) i7-3770K CPU (Ivy Bridge)
+#
+# COUNT:
+# Set the number of processors:cores per processor:threads per core
+# when Bochs is compiled for SMP emulation.
+# Bochs currently supports up to 8 threads running simultaniosly.
+# If Bochs is compiled without SMP support, it won't accept values
+# different from 1.
+#
+# QUANTUM:
+# Maximum amount of instructions allowed to execute by processor before
+# returning control to another cpu. This option exists only in Bochs
+# binary compiled with SMP support.
+#
+# RESET_ON_TRIPLE_FAULT:
+# Reset the CPU when triple fault occur (highly recommended) rather than
+# PANIC. Remember that if you trying to continue after triple fault the
+# simulation will be completely bogus !
+#
+# CPUID_LIMIT_WINNT:
+# Determine whether to limit maximum CPUID function to 2. This mode is
+# required to workaround WinNT installation and boot issues.
+#
+# MSRS:
+# Define path to user CPU Model Specific Registers (MSRs) specification.
+# See example in msrs.def.
+#
+# IGNORE_BAD_MSRS:
+# Ignore MSR references that Bochs does not understand; print a warning
+# message instead of generating #GP exception. This option is enabled
+# by default but will not be avaiable if configurable MSRs are enabled.
+#
+# MWAIT_IS_NOP:
+# When this option is enabled MWAIT will not put the CPU into a sleep state.
+# This option exists only if Bochs compiled with --enable-monitor-mwait.
+#
+# IPS:
+# Emulated Instructions Per Second. This is the number of IPS that bochs
+# is capable of running on your machine. You can recompile Bochs with
+# --enable-show-ips option enabled, to find your host's capability.
+# Measured IPS value will then be logged into your log file or shown
+# in the status bar (if supported by the gui).
+#
+# IPS is used to calibrate many time-dependent events within the bochs
+# simulation. For example, changing IPS affects the frequency of VGA
+# updates, the duration of time before a key starts to autorepeat, and
+# the measurement of BogoMips and other benchmarks.
+#
+# Examples:
+#
+# Bochs Machine/Compiler Mips
+# ______________________________________________________________________
+# 2.4.6 3.4Ghz Intel Core i7 2600 with Win7x64/g++ 4.5.2 85 to 95 Mips
+# 2.3.7 3.2Ghz Intel Core 2 Q9770 with WinXP/g++ 3.4 50 to 55 Mips
+# 2.3.7 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 38 to 43 Mips
+# 2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 21 to 25 Mips
+# 2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4 12 to 15 Mips
+#=======================================================================
+cpu: model=core2_penryn_t9600, count=1, ips=50000000, reset_on_triple_fault=1, ignore_bad_msrs=1, msrs="msrs.def"
+cpu: cpuid_limit_winnt=0
+
+#=======================================================================
+# CPUID:
+#
+# This defines features and functionality supported by Bochs emulated CPU.
+# The option has no offect if CPU model was selected in CPU option.
+#
+# MMX:
+# Select MMX instruction set support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
+#
+# APIC:
+# Select APIC configuration (LEGACY/XAPIC/XAPIC_EXT/X2APIC).
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
+#
+# SEP:
+# Select SYSENTER/SYSEXIT instruction set support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# SSE:
+# Select SSE instruction set support.
+# Any of NONE/SSE/SSE2/SSE3/SSSE3/SSE4_1/SSE4_2 could be selected.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# SSE4A:
+# Select AMD SSE4A instructions support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# AES:
+# Select AES instruction set support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# MOVBE:
+# Select MOVBE Intel(R) Atom instruction support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# XSAVE:
+# Select XSAVE extensions support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# XSAVEOPT:
+# Select XSAVEOPT instruction support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# AVX:
+# Select AVX/AVX2 instruction set support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# AVX_F16C:
+# Select AVX float16 convert instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# AVX_FMA:
+# Select AVX fused multiply add (FMA) instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# BMI:
+# Select BMI1/BMI2 instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# XOP:
+# Select AMD XOP instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# FMA4:
+# Select AMD four operand FMA instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# TBM:
+# Select AMD Trailing Bit Manipulation (TBM) instructions support.
+# This option exists only if Bochs compiled with --enable-avx option.
+#
+# X86-64:
+# Enable x86-64 and long mode support.
+# This option exists only if Bochs compiled with x86-64 support.
+#
+# 1G_PAGES:
+# Enable 1G page size support in long mode.
+# This option exists only if Bochs compiled with x86-64 support.
+#
+# PCID:
+# Enable Process-Context Identifiers (PCID) support in long mode.
+# This option exists only if Bochs compiled with x86-64 support.
+#
+# FSGSBASE:
+# Enable GS/GS BASE access instructions support in long mode.
+# This option exists only if Bochs compiled with x86-64 support.
+#
+# SMEP:
+# Enable Supervisor Mode Execution Protection (SMEP) support.
+# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
+#
+# MWAIT:
+# Select MONITOR/MWAIT instructions support.
+# This option exists only if Bochs compiled with --enable-monitor-mwait.
+#
+# VMX:
+# Select VMX extensions emulation support.
+# This option exists only if Bochs compiled with --enable-vmx option.
+#
+# VENDOR_STRING:
+# Set the CPUID vendor string returned by CPUID(0x0). This should be a
+# twelve-character ASCII string.
+#
+# BRAND_STRING:
+# Set the CPUID vendor string returned by CPUID(0x80000002 .. 0x80000004).
+# This should be at most a forty-eight-character ASCII string.
+#
+# FAMILY:
+# Set model information returned by CPUID. Default family value determined
+# by configure option --enable-cpu-level.
+#
+# MODEL:
+# Set model information returned by CPUID. Default model value is 3.
+#
+# STEPPING:
+# Set stepping information returned by CPUID. Default stepping value is 3.
+#=======================================================================
+#cpuid: x86_64=1, mmx=1, sep=1, sse=sse4_2, apic=xapic, aes=1, movbe=1, xsave=1
+#cpuid: family=6, model=0x1a, stepping=5
+
+#=======================================================================
+# MEMORY
+# Set the amount of physical memory you want to emulate.
+#
+# GUEST:
+# Set amount of guest physical memory to emulate. The default is 32MB,
+# the maximum amount limited only by physical address space limitations.
+#
+# HOST:
+# Set amount of host memory you want to allocate for guest RAM emulation.
+# It is possible to allocate less memory than you want to emulate in guest
+# system. This will fake guest to see the non-existing memory. Once guest
+# system touches new memory block it will be dynamically taken from the
+# memory pool. You will be warned (by FATAL PANIC) in case guest already
+# used all allocated host memory and wants more.
+#
+#=======================================================================
+memory: guest=512, host=256
+
+#=======================================================================
+# OPTROMIMAGE[1-4]:
+# You may now load up to 4 optional ROM images. Be sure to use a
+# read-only area, typically between C8000 and EFFFF. These optional
+# ROM images should not overwrite the rombios (located at
+# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
+# Those ROM images will be initialized by the bios if they contain
+# the right signature (0x55AA) and a valid checksum.
+# It can also be a convenient way to upload some arbitrary code/data
+# in the simulation, that can be retrieved by the boot loader
+#=======================================================================
+#optromimage1: file=optionalrom.bin, address=0xd0000
+#optromimage2: file=optionalrom.bin, address=0xd1000
+#optromimage3: file=optionalrom.bin, address=0xd2000
+#optromimage4: file=optionalrom.bin, address=0xd3000
+optromimage1: file=../../src/bin/intel.rom, address=0xcb000
+
+#optramimage1: file=/path/file1.img, address=0x0010000
+#optramimage2: file=/path/file2.img, address=0x0020000
+#optramimage3: file=/path/file3.img, address=0x0030000
+#optramimage4: file=/path/file4.img, address=0x0040000
+
+#=======================================================================
+# VGAROMIMAGE
+# You now need to load a VGA ROM BIOS into C0000.
+#=======================================================================
+#vgaromimage: file=bios/VGABIOS-elpin-2.40
+#vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest
+#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
+vgaromimage: file=bochs/bios/VGABIOS-lgpl-latest
+
+#=======================================================================
+# VGA:
+# This defines parameters related to the VGA display
+#
+# EXTENSION
+# Here you can specify the display extension to be used. With the value
+# 'none' you can use standard VGA with no extension. Other supported
+# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
+#
+# UPDATE_FREQ
+# The VGA update frequency is based on the emulated clock and the default
+# value is 5. Keep in mind that you must tweak the 'cpu: ips=N' directive
+# to be as close to the number of emulated instructions-per-second your
+# workstation can do, for this to be accurate. If the realtime sync is
+# enabled with the 'clock' option, the value is based on the real time.
+# This parameter can be changed at runtime.
+#
+# Examples:
+# vga: extension=cirrus, update_freq=10
+#=======================================================================
+#vga: extension=vbe, update_freq=5
+
+#=======================================================================
+# FLOPPYA:
+# Point this to pathname of floppy image file or device
+# This should be of a bootable floppy(image/device) if you're
+# booting from 'a' (or 'floppy').
+#
+# You can set the initial status of the media to 'ejected' or 'inserted'.
+# floppya: 2_88=path, status=ejected (2.88M 3.5" media)
+# floppya: 1_44=path, status=inserted (1.44M 3.5" media)
+# floppya: 1_2=path, status=ejected (1.2M 5.25" media)
+# floppya: 720k=path, status=inserted (720K 3.5" media)
+# floppya: 360k=path, status=inserted (360K 5.25" media)
+# floppya: 320k=path, status=inserted (320K 5.25" media)
+# floppya: 180k=path, status=inserted (180K 5.25" media)
+# floppya: 160k=path, status=inserted (160K 5.25" media)
+# floppya: image=path, status=inserted (guess media type from image size)
+# floppya: 1_44=vvfat:path, status=inserted (use directory as VFAT media)
+# floppya: type=1_44 (1.44M 3.5" floppy drive, no media)
+#
+# The path should be the name of a disk image file. On Unix, you can use a raw
+# device name such as /dev/fd0 on Linux. On win32 platforms, use drive letters
+# such as a: or b: as the path. The parameter 'image' works with image files
+# only. In that case the size must match one of the supported types.
+# The parameter 'type' can be used to enable the floppy drive without media
+# and status specified. Usually the drive type is set up based on the media type.
+# The optional parameter 'write_protected' can be used to control the media
+# write protect switch. By default it is turned off.
+#=======================================================================
+#floppya: 1_44=/dev/fd0, status=inserted
+#floppya: image=../1.44, status=inserted
+#floppya: 1_44=/dev/fd0H1440, status=inserted
+#floppya: 1_2=../1_2, status=inserted
+#floppya: 1_44=a:, status=inserted
+#floppya: 1_44=a.img, status=inserted, write_protected=1
+#floppya: 1_44=/dev/rfd0a, status=inserted
+floppya: 1_44=../../src/bin/ipxe.dsk, status=inserted
+
+#=======================================================================
+# FLOPPYB:
+# See FLOPPYA above for syntax
+#=======================================================================
+#floppyb: 1_44=b:, status=inserted
+#floppyb: 1_44=b.img, status=inserted
+
+#=======================================================================
+# ATA0, ATA1, ATA2, ATA3
+# ATA controller for hard disks and cdroms
+#
+# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
+#
+# These options enables up to 4 ata channels. For each channel
+# the two base io addresses and the irq must be specified.
+#
+# ata0 and ata1 are enabled by default with the values shown below
+#
+# Examples:
+# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
+# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
+# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
+# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
+#=======================================================================
+ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
+ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
+ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
+ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
+
+#=======================================================================
+# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
+#
+# This defines the type and characteristics of all attached ata devices:
+# type= type of attached device [disk|cdrom]
+# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3]
+# mode= only valid for disks [undoable|growing|volatile|vvfat]
+# path= path of the image / directory
+# cylinders= only valid for disks
+# heads= only valid for disks
+# spt= only valid for disks
+# status= only valid for cdroms [inserted|ejected]
+# biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
+# translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
+# model= string returned by identify device command
+# journal= optional filename of the redolog for undoable, volatile and vvfat disks
+#
+# Point this at a hard disk image file, cdrom iso file, or physical cdrom
+# device. To create a hard disk image, try running bximage. It will help you
+# choose the size and then suggest a line that works with it.
+#
+# In UNIX it may be possible to use a raw device as a Bochs hard disk,
+# but WE DON'T RECOMMEND IT. In Windows there is no easy way.
+#
+# In windows, the drive letter + colon notation should be used for cdroms.
+# Depending on versions of windows and drivers, you may only be able to
+# access the "first" cdrom in the system. On MacOSX, use path="drive"
+# to access the physical drive.
+#
+# The path is mandatory for hard disks. Disk geometry autodetection works with
+# images created by bximage if CHS is set to 0/0/0 (cylinders are calculated
+# using heads=16 and spt=63). For other hard disk images and modes the
+# cylinders, heads, and spt are mandatory. In all cases the disk size reported
+# from the image must be exactly C*H*S*512.
+#
+# Default values are:
+# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
+#
+# The biosdetect option has currently no effect on the bios
+#
+# Examples:
+# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
+# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
+# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
+# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
+# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
+# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
+# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
+# ata3-slave: type=cdrom, path=iso.sample, status=inserted
+#=======================================================================
+#ata0-master: type=disk, mode=flat, path="30M.sample"
+#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
+#ata0-master: type=disk, mode=flat, path="c.img", cylinders=0 # autodetect
+#ata0-slave: type=disk, mode=vvfat, path=/bochs/images/vvfat, journal=vvfat.redolog
+#ata0-slave: type=cdrom, path=D:, status=inserted
+#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
+#ata0-slave: type=cdrom, path="drive", status=inserted
+#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted
+
+#=======================================================================
+# BOOT:
+# This defines the boot sequence. Now you can specify up to 3 boot drives,
+# which can be 'floppy', 'disk', 'cdrom' or 'network' (boot ROM).
+# Legacy 'a' and 'c' are also supported.
+# Examples:
+# boot: floppy
+# boot: cdrom, disk
+# boot: network, disk
+# boot: cdrom, floppy, disk
+#=======================================================================
+#boot: floppy
+#boot: disk
+boot: network, floppy
+
+#=======================================================================
+# CLOCK:
+# This defines the parameters of the clock inside Bochs:
+#
+# SYNC:
+# This defines the method how to synchronize the Bochs internal time
+# with realtime. With the value 'none' the Bochs time relies on the IPS
+# value and no host time synchronization is used. The 'slowdown' method
+# sacrifices performance to preserve reproducibility while allowing host
+# time correlation. The 'realtime' method sacrifices reproducibility to
+# preserve performance and host-time correlation.
+# It is possible to enable both synchronization methods.
+#
+# RTC_SYNC:
+# If this option is enabled together with the realtime synchronization,
+# the RTC runs at realtime speed. This feature is disabled by default.
+#
+# TIME0:
+# Specifies the start (boot) time of the virtual machine. Use a time
+# value as returned by the time(2) system call. If no time0 value is
+# set or if time0 equal to 1 (special case) or if time0 equal 'local',
+# the simulation will be started at the current local host time.
+# If time0 equal to 2 (special case) or if time0 equal 'utc',
+# the simulation will be started at the current utc time.
+#
+# Syntax:
+# clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
+#
+# Example:
+# clock: sync=none, time0=local # Now (localtime)
+# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980
+# clock: sync=none, time0=631148400 # Mon Jan 1 00:00:00 1990
+# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999
+# clock: sync=realtime, time0=946681200 # Sat Jan 1 00:00:00 2000
+# clock: sync=none, time0=1 # Now (localtime)
+# clock: sync=none, time0=utc # Now (utc/gmt)
+#
+# Default value are sync=none, time0=local
+#=======================================================================
+#clock: sync=none, time0=local
+
+
+#=======================================================================
+# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
+# Enables or disables the 0xaa55 signature check on boot floppies
+# Defaults to disabled=0
+# Examples:
+# floppy_bootsig_check: disabled=0
+# floppy_bootsig_check: disabled=1
+#=======================================================================
+floppy_bootsig_check: disabled=0
+
+#=======================================================================
+# LOG:
+# Give the path of the log file you'd like Bochs debug and misc. verbiage
+# to be written to. If you don't use this option or set the filename to
+# '-' the output is written to the console. If you really don't want it,
+# make it "/dev/null" (Unix) or "nul" (win32). :^(
+#
+# Examples:
+# log: ./bochs.out
+# log: /dev/tty
+#=======================================================================
+#log: /dev/null
+log: bochsout.txt
+
+#=======================================================================
+# LOGPREFIX:
+# This handles the format of the string prepended to each log line.
+# You may use those special tokens :
+# %t : 11 decimal digits timer tick
+# %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
+# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
+# %d : 5 characters string of the device, between brackets
+#
+# Default : %t%e%d
+# Examples:
+# logprefix: %t-%e-@%i-%d
+# logprefix: %i%e%d
+#=======================================================================
+#logprefix: %t%e%d
+
+#=======================================================================
+# LOG CONTROLS
+#
+# Bochs has four severity levels for event logging.
+# panic: cannot proceed. If you choose to continue after a panic,
+# don't be surprised if you get strange behavior or crashes.
+# error: something went wrong, but it is probably safe to continue the
+# simulation.
+# info: interesting or useful messages.
+# debug: messages useful only when debugging the code. This may
+# spit out thousands per second.
+#
+# For events of each level, you can choose to exit Bochs ('fatal'), 'report'
+# or 'ignore'. On some guis you have the additional choice 'ask'. A gui dialog
+# appears asks how to proceed.
+#
+# It is also possible to specify the 'action' to do for each Bochs facility
+# separately (e.g. crash on panics from everything except the cdrom, and only
+# report those). See the 'log function' module list in the user documentation.
+#
+# If you are experiencing many panics, it can be helpful to change
+# the panic action to report instead of fatal. However, be aware
+# that anything executed after a panic is uncharted territory and can
+# cause bochs to become unstable. The panic is a "graceful exit," so
+# if you disable it you may get a spectacular disaster instead.
+#=======================================================================
+panic: action=ask
+error: action=report
+info: action=report
+debug: action=ignore, pci=report # report BX_DEBUG from module 'pci'
+
+#=======================================================================
+# DEBUGGER_LOG:
+# Give the path of the log file you'd like Bochs to log debugger output.
+# If you really don't want it, make it /dev/null or '-'. :^(
+#
+# Examples:
+# debugger_log: ./debugger.out
+#=======================================================================
+#debugger_log: /dev/null
+#debugger_log: debugger.out
+debugger_log: -
+
+#=======================================================================
+# COM1, COM2, COM3, COM4:
+# This defines a serial port (UART type 16550A). In the 'term' you can specify
+# a device to use as com1. This can be a real serial line, or a pty. To use
+# a pty (under X/Unix), create two windows (xterms, usually). One of them will
+# run bochs, and the other will act as com1. Find out the tty the com1
+# window using the `tty' command, and use that as the `dev' parameter.
+# Then do `sleep 1000000' in the com1 window to keep the shell from
+# messing with things, and run bochs in the other window. Serial I/O to
+# com1 (port 0x3f8) will all go to the other window.
+# In socket* and pipe* (win32 only) modes Bochs becomes either socket/named pipe
+# client or server. In client mode it connects to an already running server (if
+# connection fails Bochs treats com port as not connected). In server mode it
+# opens socket/named pipe and waits until a client application connects to it
+# before starting simulation. This mode is useful for remote debugging (e.g.
+# with gdb's "target remote host:port" command or windbg's command line option
+# -k com:pipe,port=\\.\pipe\pipename). Note: 'socket' is a shorthand for
+# 'socket-client' and 'pipe' for 'pipe-client'. Socket modes use simple TCP
+# communication, pipe modes use duplex byte mode pipes.
+# Other serial modes are 'null' (no input/output), 'file' (output to a file
+# specified as the 'dev' parameter), 'raw' (use the real serial port - under
+# construction for win32), 'mouse' (standard serial mouse - requires
+# mouse option setting 'type=serial', 'type=serial_wheel' or 'type=serial_msys').
+#
+# Examples:
+# com1: enabled=1, mode=null
+# com1: enabled=1, mode=mouse
+# com2: enabled=1, mode=file, dev=serial.out
+# com3: enabled=1, mode=raw, dev=com1
+# com3: enabled=1, mode=socket-client, dev=localhost:8888
+# com3: enabled=1, mode=socket-server, dev=localhost:8888
+# com4: enabled=1, mode=pipe-client, dev=\\.\pipe\mypipe
+# com4: enabled=1, mode=pipe-server, dev=\\.\pipe\mypipe
+#=======================================================================
+#com1: enabled=1, mode=term, dev=/dev/ttyp9
+
+
+#=======================================================================
+# PARPORT1, PARPORT2:
+# This defines a parallel (printer) port. When turned on and an output file is
+# defined the emulated printer port sends characters printed by the guest OS
+# into the output file. On some platforms a device filename can be used to
+# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
+# win32 platforms).
+#
+# Examples:
+# parport1: enabled=1, file="parport.out"
+# parport2: enabled=1, file="/dev/lp0"
+# parport1: enabled=0
+#=======================================================================
+parport1: enabled=1, file="parport.out"
+
+#=======================================================================
+# SB16:
+# This defines the SB16 sound emulation. It can have several of the
+# following properties.
+# All properties are in the format sb16: property=value
+# enabled:
+# This optional property controls the presence of the SB16 emulation.
+# The emulation is turned on unless this property is used and set to 0.
+# midi: The filename is where the midi data is sent. This can be a
+# device or just a file if you want to record the midi data.
+# midimode:
+# 0=no data
+# 1=output to device (system dependent. midi denotes the device driver)
+# 2=SMF file output, including headers
+# 3=output the midi data stream to the file (no midi headers and no
+# delta times, just command and data bytes)
+# wave: This is the device/file where wave output is stored
+# wavemode:
+# 0=no data
+# 1=output to device (system dependent. wave denotes the device driver)
+# 2=VOC file output, incl. headers
+# 3=output the raw wave stream to the file
+# log: The file to write the sb16 emulator messages to.
+# loglevel:
+# 0=no log
+# 1=resource changes, midi program and bank changes
+# 2=severe errors
+# 3=all errors
+# 4=all errors plus all port accesses
+# 5=all errors and port accesses plus a lot of extra info
+# dmatimer:
+# microseconds per second for a DMA cycle. Make it smaller to fix
+# non-continuous sound. 750000 is usually a good value. This needs a
+# reasonably correct setting for the IPS parameter of the CPU option.
+#
+# Examples for output devices:
+# sb16: midimode=1, midi="", wavemode=1, wave="" # win32
+# sb16: midimode=1, midi=alsa:128:0, wavemode=1, wave=alsa # Linux with ALSA
+#=======================================================================
+#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
+
+#=======================================================================
+# ES1370:
+# This defines the ES1370 sound emulation. The parameter 'enabled' controls the
+# presence of the device. In addition to this, it must be loaded with 'plugin_ctrl'
+# and assigned to a PCI slot. The 'wavedev' parameter is similar to the 'wave'
+# parameter of the SB16 soundcard. The emulation supports recording and playback
+# (except DAC1+DAC2 output at the same time).
+#
+# Examples:
+# es1370: enabled=1, wavedev="" # win32
+# es1370: enabled=1, wavedev=alsa # Linux with ALSA
+#=======================================================================
+#es1370: enabled=1, wavedev=alsa
+
+#=======================================================================
+# KEYBOARD_SERIAL_DELAY:
+# Approximate time in microseconds that it takes one character to
+# be transfered from the keyboard to controller over the serial path.
+# Examples:
+# keyboard_serial_delay: 200
+#=======================================================================
+keyboard_serial_delay: 250
+
+#=======================================================================
+# KEYBOARD_PASTE_DELAY:
+# Approximate time in microseconds between attempts to paste
+# characters to the keyboard controller. This leaves time for the
+# guest os to deal with the flow of characters. The ideal setting
+# depends on how your operating system processes characters. The
+# default of 100000 usec (.1 seconds) was chosen because it works
+# consistently in Windows.
+#
+# If your OS is losing characters during a paste, increase the paste
+# delay until it stops losing characters.
+#
+# Examples:
+# keyboard_paste_delay: 100000
+#=======================================================================
+keyboard_paste_delay: 100000
+
+#=======================================================================
+# MOUSE:
+# This defines parameters for the emulated mouse type, the initial status
+# of the mouse capture and the runtime method to toggle it.
+#
+# TYPE:
+# With the mouse type option you can select the type of mouse to emulate.
+# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
+# on PS/2), 'serial', 'serial_wheel' and 'serial_msys' (one com port requires
+# setting 'mode=mouse'). To connect a mouse to an USB port, see the 'usb_uhci',
+# 'usb_ohci' or 'usb_xhci' options (requires PCI and USB support).
+#
+# ENABLED:
+# The Bochs gui creates mouse "events" unless the 'enabled' option is
+# set to 0. The hardware emulation itself is not disabled by this.
+# Unless you have a particular reason for enabling the mouse by default,
+# it is recommended that you leave it off. You can also toggle the mouse
+# usage at runtime (RFB, SDL, Win32, wxWidgets and X11 - see below).
+#
+# TOGGLE:
+# The default method to toggle the mouse capture at runtime is to press the
+# CTRL key and the middle mouse button ('ctrl+mbutton'). This option allows
+# to change the method to 'ctrl+f10' (like DOSBox), 'ctrl+alt' (like QEMU)
+# or 'f12' (replaces win32 'legacyF12' option).
+#
+# Examples:
+# mouse: enabled=1
+# mouse: type=imps2, enabled=1
+# mouse: type=serial, enabled=1
+# mouse: enabled=0, toggle=ctrl+f10
+#=======================================================================
+mouse: enabled=0
+
+#=======================================================================
+# private_colormap: Request that the GUI create and use it's own
+# non-shared colormap. This colormap will be used
+# when in the bochs window. If not enabled, a
+# shared colormap scheme may be used. Not implemented
+# on all GUI's.
+#
+# Examples:
+# private_colormap: enabled=1
+# private_colormap: enabled=0
+#=======================================================================
+private_colormap: enabled=0
+
+#=======================================================================
+# fullscreen: ONLY IMPLEMENTED ON AMIGA
+# Request that Bochs occupy the entire screen instead of a
+# window.
+#
+# Examples:
+# fullscreen: enabled=0
+# fullscreen: enabled=1
+#=======================================================================
+#fullscreen: enabled=0
+#screenmode: name="sample"
+
+#=======================================================================
+# ne2k: NE2000 compatible ethernet adapter
+#
+# Format:
+# ne2k: enabled=1, ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE,
+# ethdev=DEVICE, script=SCRIPT, bootrom=BOOTROM
+#
+# IOADDR, IRQ: You probably won't need to change ioaddr and irq, unless there
+# are IRQ conflicts. These arguments are ignored when assign the ne2k to a
+# PCI slot.
+#
+# MAC: The MAC address MUST NOT match the address of any machine on the net.
+# Also, the first byte must be an even number (bit 0 set means a multicast
+# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
+# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may
+# be other restrictions too. To be safe, just use the b0:c4... address.
+#
+# ETHDEV: The ethdev value is the name of the network interface on your host
+# platform. On UNIX machines, you can get the name by running ifconfig. On
+# Windows machines, you must run niclist to get the name of the ethdev.
+# Niclist source code is in misc/niclist.c and it is included in Windows
+# binary releases.
+#
+# SCRIPT: The script value is optional, and is the name of a script that
+# is executed after bochs initialize the network interface. You can use
+# this script to configure this network interface, or enable masquerading.
+# This is mainly useful for the tun/tap devices that only exist during
+# Bochs execution. The network interface name is supplied to the script
+# as first parameter.
+#
+# BOOTROM: The bootrom value is optional, and is the name of the ROM image
+# to load. Note that this feature is only implemented for the PCI version of
+# the NE2000.
+#
+# If you don't want to make connections to any physical networks,
+# you can use the following 'ethmod's to simulate a virtual network.
+# null: All packets are discarded, but logged to a few files.
+# vde: Virtual Distributed Ethernet
+# vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
+# The virtual host uses 192.168.10.1.
+# DHCP assigns 192.168.10.2 to the guest.
+# TFTP uses the 'ethdev' value for the root directory and doesn't
+# overwrite files.
+#
+#=======================================================================
+# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
+# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
+# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
+# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
+# ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=/usr/local/bin/slirp, bootrom=ne2k_pci.rom
+
+#=======================================================================
+# pnic: Bochs/Etherboot pseudo-NIC
+#
+# Format:
+# pnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
+# bootrom=BOOTROM
+#
+# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script,
+# bootrom) and supports the same networking modules as the NE2000 adapter.
+# In addition to this, it must be loaded with 'plugin_ctrl' and assigned
+# to a PCI slot.
+#=======================================================================
+#pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
+
+#=======================================================================
+# e1000: Intel(R) 82540EM Gigabit Ethernet adapter
+#
+# Format:
+# e1000: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
+# bootrom=BOOTROM
+#
+# The E1000 accepts the same syntax (for mac, ethmod, ethdev, script, bootrom)
+# and supports the same networking modules as the NE2000 adapter. In addition
+# to this, it must be loaded with 'plugin_ctrl' and assigned to a PCI slot.
+#=======================================================================
+#e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=/usr/local/bin/slirp
+e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=tuntap, ethdev=/dev/net/tun:tap0
+
+#=======================================================================
+# KEYBOARD_MAPPING:
+# This enables a remap of a physical localized keyboard to a
+# virtualized us keyboard, as the PC architecture expects.
+# If enabled, the keymap file must be specified.
+#
+# Examples:
+# keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
+#=======================================================================
+keyboard_mapping: enabled=0, map=
+
+#=======================================================================
+# KEYBOARD_TYPE:
+# Type of keyboard return by a "identify keyboard" command to the
+# keyboard controler. It must be one of "xt", "at" or "mf".
+# Defaults to "mf". It should be ok for almost everybody. A known
+# exception is french macs, that do have a "at"-like keyboard.
+#
+# Examples:
+# keyboard_type: mf
+#=======================================================================
+#keyboard_type: mf
+
+#=======================================================================
+# USER_SHORTCUT:
+# This defines the keyboard shortcut to be sent when you press the "user"
+# button in the headerbar. The shortcut string is a combination of maximum
+# 3 key names (listed below) separated with a '-' character.
+# Valid key names:
+# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
+# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
+# "plus", "right", "shift", "space", "tab", "up", "win", "print" and "power".
+#
+# Example:
+# user_shortcut: keys=ctrl-alt-del
+#=======================================================================
+#user_shortcut: keys=ctrl-alt-del
+
+#=======================================================================
+# PCI:
+# This option controls the presence of a PCI chipset in Bochs. Currently it only
+# supports the i440FX chipset. You can also specify the devices connected to
+# PCI slots. Up to 5 slots are available. These devices are currently supported:
+# cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
+#
+# Example:
+# pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
+#=======================================================================
+pci: enabled=1, chipset=i440fx, slot1=e1000
+
+#=======================================================================
+# USB_UHCI:
+# This option controls the presence of the USB root hub which is a part
+# of the i440FX PCI chipset. With the portX parameter you can connect devices
+# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom'
+# 'hub' and 'printer'). NOTE: UHCI must be loaded with 'plugin_ctrl'.
+#
+# The optionsX parameter can be used to assign specific options to the device
+# connected to the corresponding USB port. Currently this feature is only used
+# to set the speed reported by device and by the 'disk' device to specify
+# an alternative redolog file of some image modes.
+#
+# If you connect the mouse or tablet to one of the ports, Bochs forwards the
+# mouse movement data to the USB device instead of the selected mouse type.
+# When connecting the keypad to one of the ports, Bochs forwards the input of
+# the numeric keypad to the USB device instead of the PS/2 keyboard.
+#
+# To connect a 'flat' mode image as an USB hardisk you can use the 'disk' device
+# with the path to the image separated with a colon. To use other disk image modes
+# similar to ATA disks the syntax 'disk:mode:filename' must be used (see below).
+#
+# To emulate an USB cdrom you can use the 'cdrom' device name and the path to
+# an ISO image or raw device name also separated with a colon. An option to
+# insert/eject media is available in the runtime configuration.
+#
+# The device name 'hub' connects an external hub with max. 8 ports (default: 4)
+# to the root hub. To specify the number of ports you have to add the value
+# separated with a colon. Connecting devices to the external hub ports is only
+# available in the runtime configuration.
+#
+# The device 'printer' emulates the HP Deskjet 920C printer. The PCL data is
+# sent to a file specified in bochsrc.txt. The current code appends the PCL
+# code to the file if the file already existed. It would probably be nice to
+# overwrite the file instead, asking user first.
+#=======================================================================
+#usb_uhci: enabled=1
+#usb_uhci: enabled=1, port1=mouse, port2=disk:usbstick.img
+#usb_uhci: enabled=1, port1=hub:7, port2=disk:growing:usbdisk.img
+#usb_uhci: enabled=1, port2=disk:undoable:usbdisk.img, options1=journal:redo.log
+#usb_uhci: enabled=1, port1=printer:printdata.bin, port2=cdrom:image.iso
+
+#=======================================================================
+# USB_OHCI:
+# This option controls the presence of the USB OHCI host controller with a
+# 2-port hub. The portX option accepts the same device types with the same
+# syntax as the UHCI controller (see above). The OHCI HC must be assigned to
+# a PCI slot and loaded with 'plugin_ctrl'.
+#=======================================================================
+#usb_ohci: enabled=1
+#usb_ohci: enabled=1, port1=printer:usbprinter.bin
+
+#=======================================================================
+# USB_XHCI:
+# This option controls the presence of the experimental USB xHCI host controller
+# with a 4-port hub. The portX option accepts the same device types with the
+# same syntax as the UHCI controller (see above). The xHCI HC must be assigned
+# to a PCI slot and loaded with 'plugin_ctrl'.
+#=======================================================================
+#usb_xhci: enabled=1
+
+#=======================================================================
+# CMOSIMAGE:
+# This defines image file that can be loaded into the CMOS RAM at startup.
+# The rtc_init parameter controls whether initialize the RTC with values stored
+# in the image. By default the time0 argument given to the clock option is used.
+# With 'rtc_init=image' the image is the source for the initial time.
+#
+# Example:
+# cmosimage: file=cmos.img, rtc_init=image
+#=======================================================================
+#cmosimage: file=cmos.img, rtc_init=time0
+
+#=======================================================================
+# MAGIC_BREAK:
+# This enables the "magic breakpoint" feature when using the debugger.
+# The useless cpu instruction XCHG BX, BX causes Bochs to enter the
+# debugger mode. This might be useful for software development.
+#
+# Example:
+# magic_break: enabled=1
+#=======================================================================
+#magic_break: enabled=1
+magic_break: enabled=1
+
+#=======================================================================
+# PORT_E9_HACK:
+# The 0xE9 port doesn't exists in normal ISA architecture. However, we
+# define a convention here, to display on the console of the system running
+# Bochs anything that is written to it. The idea is to provide debug output
+# very early when writing BIOS or OS code for example, without having to
+# bother with setting up a serial port or etc. Reading from port 0xE9 will
+# will return 0xe9 to let you know if the feature is available.
+# Leave this 0 unless you have a reason to use it.
+#
+# Example:
+# port_e9_hack: enabled=1
+#=======================================================================
+port_e9_hack: enabled=1
+
+#=======================================================================
+# DEBUG_SYMBOLS:
+# This loads symbols from the specified file for use in Bochs' internal
+# debugger. Symbols are loaded into global context. This is equivalent to
+# issuing ldsym debugger command at start up.
+#
+# Example:
+# debug_symbols: file="kernel.sym"
+# debug_symbols: file="kernel.sym", offset=0x80000000
+#=======================================================================
+#debug_symbols: file="kernel.sym"
+
+#=======================================================================
+# other stuff
+#=======================================================================
+#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
+#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
+#print_timestamps: enabled=1
+
+#-------------------------
+# PCI host device mapping
+#-------------------------
+#pcidev: vendor=0x1234, device=0x5678
+
+#=======================================================================
+# GDBSTUB:
+# Enable GDB stub. See user documentation for details.
+# Default value is enabled=0.
+#=======================================================================
+#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
+
+#=======================================================================
+# USER_PLUGIN:
+# Load user-defined plugin. This option is available only if Bochs is
+# compiled with plugin support. Maximum 8 different plugins are supported.
+# See the example in the Bochs sources how to write a plugin device.
+#=======================================================================
+#user_plugin: name=testdev
+
+#=======================================================================
+# for Macintosh, use the style of pathnames in the following
+# examples.
+#
+# vgaromimage: :bios:VGABIOS-elpin-2.40
+# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
+# floppya: 1_44=[fd:], status=inserted
+#=======================================================================
+
+#=======================================================================
+# MEGS
+# Set the number of Megabytes of physical memory you want to emulate.
+# The default is 32MB, most OS's won't need more than that.
+# The maximum amount of memory supported is 2048Mb.
+# The 'MEGS' option is deprecated. Use 'MEMORY' option instead.
+#=======================================================================
+#megs: 256
+#megs: 128
+#megs: 64
+#megs: 32
+#megs: 16
+#megs: 8