summaryrefslogtreecommitdiffstats
path: root/qemu/roms/SLOF/slof/fs/ide.fs
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/roms/SLOF/slof/fs/ide.fs')
-rw-r--r--qemu/roms/SLOF/slof/fs/ide.fs612
1 files changed, 612 insertions, 0 deletions
diff --git a/qemu/roms/SLOF/slof/fs/ide.fs b/qemu/roms/SLOF/slof/fs/ide.fs
new file mode 100644
index 000000000..d6f16edd0
--- /dev/null
+++ b/qemu/roms/SLOF/slof/fs/ide.fs
@@ -0,0 +1,612 @@
+\ *****************************************************************************
+\ * Copyright (c) 2004, 2008 IBM Corporation
+\ * All rights reserved.
+\ * This program and the accompanying materials
+\ * are made available under the terms of the BSD License
+\ * which accompanies this distribution, and is available at
+\ * http://www.opensource.org/licenses/bsd-license.php
+\ *
+\ * Contributors:
+\ * IBM Corporation - initial implementation
+\ ****************************************************************************/
+\
+\ 26.06.2007 added: two devices (Master/Slave) per channel
+
+1 encode-int s" #address-cells" property
+0 encode-int s" #size-cells" property
+
+: decode-unit 1 hex-decode-unit ;
+: encode-unit 1 hex-encode-unit ;
+
+0 VALUE >ata \ base address for command-block
+0 VALUE >ata1 \ base address for control block
+
+true VALUE no-timeout \ flag that no timeout occurred
+
+0c CONSTANT #cdb-bytes \ command descriptor block (12 bytes)
+800 CONSTANT atapi-size
+200 CONSTANT ata-size
+
+\ *****************************
+\ Some register access helpers.
+\ *****************************
+: ata-ctrl! 2 >ata1 + io-c! ; \ device control reg
+: ata-astat@ 2 >ata1 + io-c@ ; \ read alternate status
+
+: ata-data@ 0 >ata + io-w@ ; \ data reg
+: ata-data! 0 >ata + io-w! ; \ data reg
+: ata-err@ 1 >ata + io-c@ ; \ error reg
+: ata-feat! 1 >ata + io-c! ; \ feature reg
+: ata-cnt@ 2 >ata + io-c@ ; \ sector count reg
+: ata-cnt! 2 >ata + io-c! ; \ sector count reg
+: ata-lbal! 3 >ata + io-c! ; \ lba low reg
+: ata-lbal@ 3 >ata + io-c@ ; \ lba low reg
+: ata-lbam! 4 >ata + io-c! ; \ lba mid reg
+: ata-lbam@ 4 >ata + io-c@ ; \ lba mid reg
+: ata-lbah! 5 >ata + io-c! ; \ lba high reg
+: ata-lbah@ 5 >ata + io-c@ ; \ lba high reg
+: ata-dev! 6 >ata + io-c! ; \ device reg
+: ata-dev@ 6 >ata + io-c@ ; \ device reg
+: ata-cmd! 7 >ata + io-c! ; \ command reg
+: ata-stat@ 7 >ata + io-c@ ; \ status reg
+
+\ **********************************************************************
+\ ATA / ATAPI Commands specifications:
+\ - AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
+\ - ATA Packet Interface for CD-ROMs SFF-8020i
+\ - ATA/ATAPI Host Adapters Standard (T13/1510D)
+\ **********************************************************************
+00 CONSTANT cmd#nop \ ATA and ATAPI
+08 CONSTANT cmd#device-reset \ ATAPI only (mandatory)
+20 CONSTANT cmd#read-sector \ ATA and ATAPI
+90 CONSTANT cmd#execute-device-diagnostic \ ATA and ATAPI
+a0 CONSTANT cmd#packet \ ATAPI only (mandatory)
+a1 CONSTANT cmd#identify-packet-device \ ATAPI only (mandatory)
+ec CONSTANT cmd#identify-device \ ATA and ATAPI
+
+\ *****************************
+\ Setup Regs for ATA:
+\ BAR 0 & 1 : Device 0
+\ BAR 2 & 3 : Device 1
+\ *****************************
+: set-regs ( n -- )
+ dup
+ 01 and \ only Chan 0 or Chan 1 allowed
+ 3 lshift dup 10 + config-l@ -4 and to >ata
+ 14 + config-l@ -4 and to >ata1
+ 02 ata-ctrl! \ disable interrupts
+ 02 and
+ IF
+ 10
+ ELSE
+ 00
+ THEN
+ ata-dev!
+;
+
+ata-size VALUE block-size
+80000 VALUE max-transfer \ Arbitrary, really
+
+CREATE sector d# 512 allot
+CREATE packet-cdb #cdb-bytes allot
+CREATE return-buffer atapi-size allot
+
+scsi-open \ add scsi functions
+
+\ ********************************
+\ show all ATAPI-registers
+\ data-register not read in order
+\ to not influence PIO mode
+\ ********************************
+: show-regs
+ cr
+ cr ." alt. Status: " ata-astat@ .
+ cr ." Status : " ata-stat@ .
+ cr ." Device : " ata-dev@ .
+ cr ." Error-Reg : " ata-err@ .
+ cr ." Sect-Count : " ata-cnt@ .
+ cr ." LBA-Low : " ata-lbal@ .
+ cr ." LBA-Med : " ata-lbam@ .
+ cr ." LBA-High : " ata-lbah@ .
+;
+
+\ ***************************************************
+\ reads ATAPI-Status and displays it if check-bit set
+\ ***************************************************
+: status-check ( -- )
+ ata-stat@
+ dup
+ 01 and \ is 'check' flag set ?
+ IF
+ cr
+ ." - ATAPI-Status: " .
+ ata-err@ \ retrieve sense code
+ dup
+ 60 = \ sense code = 6 ?
+ IF
+ ." ( media changed or reset )" \ 'unit attention'
+ drop \ drop err-reg content
+ ELSE
+ dup
+ ." (Err : " . \ show err-reg content
+ space
+ rshift 4 .sense-text \ show text string
+ 29 emit
+ THEN
+ cr
+ ELSE
+ drop \ remove unused status
+ THEN
+;
+
+\ *************************************
+\ Wait for interface ready condition
+\ Bit 7 of Status-Register is busy flag
+\ new version with abort after 5 sec.
+\ *************************************
+: wait-for-ready
+ get-msecs \ start timer
+ BEGIN
+ ata-stat@ 80 and 0<> \ busy flag still set ?
+ no-timeout and
+ WHILE \ yes
+ dup get-msecs swap
+ - \ calculate timer difference
+ FFFF AND \ reduce to 65.5 seconds
+ d# 5000 > \ difference > 5 seconds ?
+ IF
+ false to no-timeout
+ THEN
+ REPEAT
+ drop
+;
+
+\ *************************************
+\ wait for specific status bits
+\ new version with abort after 5 sec.
+\ *************************************
+: wait-for-status ( val mask -- )
+ get-msecs \ initial timer value (start)
+ >r
+ BEGIN
+ 2dup \ val mask
+ ata-stat@ and <> \ expected status ?
+ no-timeout and \ and no timeout ?
+ WHILE
+ get-msecs r@ - \ calculate timer difference
+ FFFF AND \ mask-off overflow bits
+ d# 5000 > \ 5 seconds exceeded ?
+ IF
+ false to no-timeout \ set global flag
+ THEN
+ REPEAT
+ r> \ clean return stack
+ 3drop
+;
+
+\ *********************************
+\ remove extra spaces from string end
+\ *********************************
+: cut-string ( saddr nul -- )
+ swap
+ over +
+ swap
+ 1 rshift \ bytecount -> wordcount
+ 0 do
+ /w -
+ dup ( addr -- addr addr )
+ w@ ( addr addr -- addr nuw )
+ dup ( addr nuw -- addr nuw nuw )
+ 2020 =
+ IF
+ drop
+ 0
+ ELSE
+ LEAVE
+ THEN
+ over
+ w!
+ LOOP
+ drop
+ drop
+;
+
+\ ****************************************************
+\ prints model-string received by identify device
+\ ****************************************************
+: show-model ( dev# chan# -- )
+ 2dup
+ ." CH " . \ channel 0 / 1
+ 0= IF ." / MA" \ Master / Slave
+ ELSE ." / SL"
+ THEN
+ swap
+ 2 * + ." (@" . ." ) : " \ device number
+ sector 1 +
+ c@
+ 80 AND 0=
+ IF
+ ." ATA-Drive "
+ ELSE
+ ." ATAPI-Drive "
+ THEN
+
+ 22 emit \ start string display with "
+ sector d# 54 + \ string starts 54 bytes from buffer start
+ dup
+ d# 40 \ and is 40 chars long
+ cut-string \ remove all trailing spaces
+
+ BEGIN
+ dup
+ w@
+ wbflip
+ wbsplit
+ dup 0<> \ first char
+ IF
+ emit
+ dup 0<> \ second char
+ IF
+ emit
+ wa1+ \ increment address for next
+ false
+ ELSE \ second char = EndOfString
+ drop
+ true
+ THEN
+ ELSE \ first char = EndOfString
+ drop
+ drop
+ true
+ THEN
+ UNTIL \ end of string detected
+ drop
+ 22 emit \ end string display
+
+ sector c@ \ get lower byte of first doublet
+ 80 AND \ check bit 7
+ IF
+ ." (removable media)"
+ THEN
+
+ sector 1 +
+ c@
+ 80 AND 0= IF \ is this an ATA drive ?
+ sector d# 120 + \ get word 60 + 61
+ rl@-le \ read 32-bit as little endian value
+ d# 512 \ standard ATA block-size
+ swap
+ .capacity-text ( block-size #blocks -- )
+ THEN
+
+ sector d# 98 + \ goto word 49
+ w@
+ wbflip
+ 200 and 0= IF cr ." ** LBA is not supported " THEN
+
+ sector c@ \ get lower byte of first doublet
+ 03 AND 01 = \ we use 12-byte packet commands (=00b)
+ IF
+ cr ." packet size = 16 ** not supported ! **"
+ THEN
+ no-timeout not \ any timeout occurred so far ?
+ IF
+ cr ." ** timeout **"
+ THEN
+;
+
+\ ****************************
+\ ATA functions
+\ ****************************
+: pio-sector ( addr -- ) 100 0 DO ata-data@
+ over w! wa1+ LOOP drop ;
+: pio-sector ( addr -- )
+ wait-for-ready pio-sector ;
+: pio-sectors ( n addr -- ) swap 0 ?DO dup pio-sector 200 + LOOP drop ;
+
+: lba! lbsplit
+ 0f and 40 or \ always set LBA-mode + LBA (27..24)
+ ata-dev@ 10 and or \ add current device-bit (DEV)
+ ata-dev! \ set LBA (27..24)
+ ata-lbah! \ set LBA (23..16)
+ ata-lbam! \ set LBA (15..8)
+ ata-lbal! \ set LBA (7..0)
+;
+
+: read-sectors ( lba count addr -- )
+ >r dup >r ata-cnt! lba! 20 ata-cmd! r> r> pio-sectors ;
+
+: read-sectors ( lba count addr dev-nr -- )
+ set-regs ( lba count addr ) \ Set ata regs
+ BEGIN >r dup 100 > WHILE
+ over 100 r@ read-sectors
+ >r 100 + r> 100 - r> 20000 + REPEAT
+ r> read-sectors
+;
+
+: ata-read-blocks ( addr block# #blocks dev# -- #read )
+ swap dup >r swap >r rot r> ( addr block# #blocks dev # R: #blocks )
+ read-sectors r> ( R: #read )
+;
+
+\ *******************************
+\ ATAPI functions
+\ preset LBA register with maximum
+\ allowed block-size (16-bits)
+\ *******************************
+: set-lba ( block-length -- )
+ lbsplit ( quad -- b1.lo b2 b3 b4.hi )
+ drop \ skip upper two bytes
+ drop
+ ata-lbah!
+ ata-lbam!
+;
+
+\ *******************************************
+\ gets byte-count and reads a block of words
+\ from data-register to a buffer
+\ *******************************************
+: read-pio-block ( buff-addr -- buff-addr-new )
+ ata-lbah@ 8 lshift \ get block length High
+ ata-lbam@ or \ get block length Low
+ 1 rshift \ bcount -> wcount
+ dup
+ 0> IF \ any data to transfer?
+ 0 DO \ words to read
+ dup \ buffer-address
+ ata-data@ swap w! \ write 16-bits
+ wa1+ \ address of next entry
+ LOOP
+ ELSE
+ drop ( buff-addr wcount -- buff-addr )
+ THEN
+ wait-for-ready
+;
+
+\ ********************************************
+\ ATAPI support
+\ Send a command block (12 bytes) in PIO mode
+\ read data if requested
+\ ********************************************
+: send-atapi-packet ( req-buffer -- )
+ >r ( R: req-buffer )
+ atapi-size set-lba \ set regs to length limit
+ 00 ata-feat!
+ cmd#packet ata-cmd! \ A0 = ATAPI packet command
+ 48 C8 wait-for-status ( val mask -- ) \ BSY:0 DRDY:1 DRQ:1
+ 6 0 do
+ packet-cdb i 2 * + \ transfer command block (12 bytes)
+ w@
+ ata-data! \ 6 doublets PIO transfer to device
+ loop \ copy packet to data-reg
+ status-check ( -- ) \ status err bit set ? -> display
+ wait-for-ready ( -- ) \ busy released ?
+ BEGIN
+ ata-stat@ 08 and 08 = WHILE \ Data-Request-Bit set ?
+ r> \ get last target buffer address
+ read-pio-block \ only if from device requested
+ >r \ start of next block
+ REPEAT
+ r> \ original value
+ drop \ return clean
+;
+
+: atapi-packet-io ( -- )
+ return-buffer atapi-size erase \ clear return buffer
+ return-buffer send-atapi-packet \ send 'packet-cdb' , get 'return-buffer'
+;
+
+
+
+\ ********************************
+\ ATAPI packet commands
+\ ********************************
+
+\ Methods to access atapi disk
+
+: atapi-test ( -- true|false )
+ packet-cdb scsi-build-test-unit-ready \ command-code: 00
+ atapi-packet-io ( ) \ send CDB, get return-buffer
+ ata-stat@ 1 and IF false ELSE true THEN
+;
+
+: atapi-sense ( -- ascq asc sense-key )
+ d# 252 packet-cdb scsi-build-request-sense ( alloc-len cdb -- )
+ atapi-packet-io ( ) \ send CDB, get return-buffer
+ return-buffer scsi-get-sense-data ( cdb-addr -- ascq asc sense-key )
+;
+
+: atapi-read-blocks ( address block# #blocks dev# -- #read-blocks )
+ set-regs ( address block# #blocks )
+ dup >r ( address block# #blocks )
+ packet-cdb scsi-build-read-10 ( address block# #blocks cdb -- )
+ send-atapi-packet ( address -- )
+ r> \ return requested number of blocks
+;
+
+\ ***************************************
+\ read capacity of drive medium
+\ use SCSI-Support Package
+\ ***************************************
+: atapi-read-capacity ( -- )
+ packet-cdb scsi-build-read-cap-10 \ fill block with command
+ atapi-packet-io ( ) \ send CDB, get return-buffer
+ return-buffer scsi-get-capacity-10 ( cdb -- block-size #blocks )
+ .capacity-text ( block-size #blocks -- )
+ status-check ( -- )
+;
+
+\ ***************************************
+\ read capacity of drive medium
+\ use SCSI-Support Package
+\ ***************************************
+: atapi-read-capacity-ext ( -- )
+ packet-cdb scsi-build-read-cap-16 \ fill block with command
+ atapi-packet-io ( ) \ send CDB, get return-buffer
+ return-buffer scsi-get-capacity-16 ( cdb -- block-size #blocks )
+ .capacity-text ( block-size #blocks -- )
+ status-check ( -- )
+;
+
+
+\ ***********************************************
+\ wait until media in drive is ready ( max 5 sec)
+\ ***********************************************
+: wait-for-media-ready ( -- true|false )
+ get-msecs \ initial timer value (start)
+ >r
+ BEGIN
+ atapi-test \ unit ready? false if not
+ not
+ no-timeout and
+ WHILE
+ atapi-sense ( -- ascq asc sense-key )
+ 02 = \ sense key 2 = media error
+ IF \ check add. sense code
+ 3A = \ asc: device not ready ?
+ IF
+ false to no-timeout
+ ." empty (" . 29 emit \ show asc qualifier
+ ELSE
+ drop \ discard asc qualifier
+ THEN \ medium not present, abort waiting
+ ELSE
+ drop \ discard asc
+ drop \ discard ascq
+ THEN
+ get-msecs r@ - \ calculate timer difference
+ FFFF AND \ mask-off overflow bits
+ d# 5000 > \ 5 seconds exceeded ?
+ IF
+ false to no-timeout \ set global flag
+ THEN
+ REPEAT
+ r>
+ drop
+ no-timeout
+;
+
+\ ******************************************************
+\ Method pointer for read-blocks methods
+\ controller implements 2 channels (primary / secondary)
+\ for 2 devices each (master / slasve)
+\ ******************************************************
+\ 2 channels (primary/secondary) per controller
+2 CONSTANT #chan
+
+\ 2 devices (master/slave) per channel
+2 CONSTANT #dev
+
+\ results in a total of devices
+\ connected to a controller with
+\ two separate channels (4)
+: #totaldev #dev #chan * ;
+
+CREATE read-blocks-xt #totaldev cells allot read-blocks-xt #totaldev cells erase
+
+\ Execute read-blocks of device
+: dev-read-blocks ( address block# #blocks dev# -- #read-blocks )
+ dup cells read-blocks-xt + @ execute
+;
+
+\ **********************************************************
+\ Read device type
+\ Signature ATAPI ATA
+\ ---------------------------------------------
+\ Sector Count 01h 01h
+\ Sector Number 01h 01h
+\ Cylinder Low 14h 00h
+\ Cylinder High EBh 00h
+\ Device/Head 00h or 10h 00h or 01h
+\ see also ATA/ATAPI errata at:
+\ http://suif.stanford.edu/~csapuntz/blackmagic.html
+\ **********************************************************
+: read-ident ( -- true|false )
+ false
+ 00 ata-lbal! \ clear previous signature
+ 00 ata-lbam!
+ 00 ata-lbah!
+ cmd#identify-device ata-cmd! wait-for-ready \ first try ATA, ATAPI aborts command
+ ata-stat@ CF and 48 =
+ IF
+ drop true \ cmd accepted, this is a ATA
+ d# 512 set-lba \ set LBA to sector-length
+ ELSE \ ATAPI sends signature instead
+ ata-lbam@ 14 = IF \ cylinder low = 14 ?
+ ata-lbah@ EB = IF \ cylinder high = EB ?
+ cmd#device-reset ata-cmd! wait-for-ready \ only supported by ATAPI
+ cmd#identify-packet-device ata-cmd! wait-for-ready \ first try ata
+ ata-stat@ CF and 48 = IF
+ drop true \ replace flag
+ THEN
+ THEN
+ THEN
+ THEN
+ dup IF
+ ata-stat@ 8 AND IF \ data requested (as expected) ?
+ sector read-pio-block
+ drop \ discard address end
+ ELSE
+ drop false
+ THEN
+ THEN
+
+ no-timeout not IF \ check without any timeout ?
+ drop
+ false \ no, detection discarded
+ THEN
+;
+
+scsi-close \ remove scsi commands from word list
+
+
+\ *************************************************
+\ Init controller ( chan 0 and 1 )
+\ device 0 (= master) and device 1 ( = slave)
+\ #dev #chan Dev-ID
+\ ----------------------
+\ 0 0 0 Master of Channel 0
+\ 0 1 1 Master of Channel 1
+\ 1 0 2 Slave of Channel 0
+\ 1 1 3 Slave of Channel 1
+\ *************************************************
+: find-disks ( -- )
+ #chan 0 DO \ check 2 channels (primary & secondary)
+ #dev 0 DO \ check 2 devices per channel (master / slave)
+ i 2 * j +
+ set-regs \ set base address and dev-register for register access
+ ata-stat@ 7f and 7f <> \ Check, if device is connected
+ IF
+ true to no-timeout \ preset timeout-flag
+ read-ident ( -- true|false )
+ IF
+ i j show-model \ print manufacturer + device string
+ sector 1+ c@ C0 and 80 = \ Check for ata or atapi
+ IF
+ wait-for-media-ready \ wait up to 5 sec if not ready
+ no-timeout and
+ IF
+ atapi-read-capacity
+ atapi-size to block-size \ ATAPI: 2048 bytes
+ 80000 to max-transfer
+ ['] atapi-read-blocks i 2 * j + cells read-blocks-xt + !
+ s" cdrom" strdup i 2 * j + s" generic-disk.fs" included
+ ELSE
+ ." -" \ show hint for not registered
+ THEN
+ ELSE
+ ata-size to block-size \ ATA: 512 bytes
+ 80000 to max-transfer
+ ['] ata-read-blocks i 2 * j + cells read-blocks-xt + !
+ s" disk" strdup i 2 * j + s" generic-disk.fs" included
+ THEN
+ cr
+ THEN
+ THEN
+ i 2 * j + 200 + cp
+ LOOP
+ LOOP
+;
+
+find-disks
+