diff options
Diffstat (limited to 'qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs')
-rw-r--r-- | qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs | 501 |
1 files changed, 0 insertions, 501 deletions
diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs deleted file mode 100644 index 39a02ded0..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs +++ /dev/null @@ -1,501 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space pci-class-name type - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -7 4 config-w! - -\ Special notice from ATI: -\ ATI TECHNOLOGIES INC. ("ATI") HAS NOT ASSISTED IN THE CREATION OF, -\ AND DOES NOT ENDORSE THE USE OF, THIS SOFTWARE. ATI WILL NOT BE -\ RESPONSIBLE OR LIABLE FOR ANY ACTUAL OR ALLEGED DAMAGE OR LOSS -\ CAUSED BY OR IN CONNECTION WITH THE USE OF, OR RELIANCE ON, -\ THIS SOFTWARE. - -\ Description: This FCODE driver initializes the RN50 (ES1000) ATI -\ adaptor. - --1 value mem-addr --1 value regs-addr -false value is_installed - -: reg-rl@ regs-addr + rl@-le ; -: reg-rl! regs-addr + rl!-le ; -: map-in " map-in" $call-parent ; -: map-out " map-out" $call-parent ; -: pc@ ( offset -- byte ) regs-addr + rb@ ; -: pc! ( byte offset -- ) regs-addr + rb! ; - -0 value phys_low -0 value phys_mid -0 value phys_high -0 value phys_len - -: MAP-CSR-BASE ( -- ) - " assigned-addresses" get-my-property 0= if - begin dup 0> while ( prop-addr len ) - \ Get the phys-hi mid low and the low order 32 bits of the length - - decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len - - phys_high H# FF and \ See which BAR this refers to - case - h# 10 of phys_low phys_mid phys_high h# 1000000 map-in to mem-addr endof - h# 18 of phys_low phys_mid phys_high phys_len map-in to regs-addr endof - endcase - repeat - ( prop-addr 0 ) 2drop - then - - ; - -: enable-card my-space 4 + dup config-b@ 3 or swap config-b! ; - -: EARLY-MAP ( -- ) - - " reg" get-my-property 0= if - begin dup 0> while ( prop-addr len ) - - \ Get the phys-hi mid low and the low order 32 bits of the length - - decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len - - phys_high H# FF and \ See which BAR this refers to - case - h# 10 of phys_low phys_mid phys_high H# 1000000 map-in to mem-addr endof - h# 18 of phys_low phys_mid phys_high h# 1000 map-in to regs-addr endof - endcase - repeat - ( prop-addr 0 ) 2drop - then - ; - -: EARLY-UNMAP ( -- ) - - mem-addr -1 <> if - mem-addr h# 1000000 map-out - -1 to mem-addr - then - - regs-addr -1 <> if - regs-addr h# 1000 map-out - -1 to regs-addr - then - - ; - -CREATE INIT1_ARRAY -H# 0F8 ( CONFIG_MEMSIZE ) L, H# 00000000 L, H# 01000000 L, -H# 1C0 ( MPP_TB_CONFIG ) L, H# 00FFFFFF L, H# 07000000 L, -H# 030 ( BUS_CNTL ) L, H# 00000000 L, H# 5133A3B0 L, -H# 0EC ( RBBM_CNTL ) L, H# 00000000 L, h# 00004443 L, -H# 1D0 ( DEBUG_CNTL ) L, H# FFFFFFFD L, H# 00000002 L, -H# 050 ( CRTC_GEN_CNTL ) L, H# 00000000 L, H# 04000000 L, -H# 058 ( DAC_CNTL ) L, H# 00000000 L, H# FF604102 L, -H# 168 ( PAD_CTLR_STRENGTH ) L, H# FFFEFFFF L, H# 00001200 L, -H# 178 ( MEM_REFRESH_CNTL ) L, H# 00000000 L, H# 88888888 L, -H# 17C ( MEM_READ_CNTL ) L, H# 00000000 L, H# B7C20000 L, -H# 188 ( MC_DEBUG ) L, H# FFFFFFFF L, H# 00000000 L, -H# D00 ( DISP_MISC_CNTL) L, H# 00FFFFFF L, H# 5B000000 L, -H# 88C ( TV_DAC_CNTL ) L, H# F800FCEF L, H# 00490200 L, -H# D04 ( DAC_MACRO_CNTL) L, H# 00000000 L, H# 00000905 L, -H# 284 ( FP_GEN_CNTL ) L, H# FFFFFFFF L, H# 00000008 L, -H# 030 ( BUS_CNTL ) L, H# FFFFFFEF L, H# 00000000 L, - -here INIT1_ARRAY - /L / CONSTANT INIT1_LENGTH - - -CREATE INIT2_ARRAY - -H# 140 ( MEM_CNTL ) L, H# 00000000 L, H# 38001A01 L, 0 L, -H# 158 ( MEM_SDRAM_MODE_REG ) L, H# E0000000 L, H# 08320032 L, 0 L, -H# 144 ( MEM_TIMING_CNTL ) L, H# 00000000 L, H# 20123833 L, 0 L, -H# 14C ( MC_AGP_LOCATION ) L, H# 00000000 L, H# 000FFFF0 L, 0 L, -H# 148 ( MC_FB_LOCATION ) L, H# 00000000 L, H# FFFF0000 L, 0 L, -H# 154 ( MEM_INIT_LAT_TIMER ) L, H# 00000000 L, H# 34444444 L, 0 L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# 00000000 L, H# 0A540002 L, 0 L, -H# 910 ( FCP_CNTL ) L, H# 00000000 L, H# 00000004 L, 0 L, -H# 010 ( BIOS_0_SCRATCH ) L, H# FFFFFFFB L, H# 00000004 L, 0 L, -H# D64 ( DISP_OUTPUT_CNTL ) L, H# FFFFFBFF L, H# 00000000 L, 0 L, -H# 2A8 ( TMDS_PLL_CNTL ) L, H# 00000000 L, H# 00000A1B L, 0 L, -H# 800 ( TV_MASTER_CNTL ) L, H# BFFFFFFF L, H# 40000000 L, 0 L, -H# D10 ( DISP_TEST_DBUG_CTL ) L, H# EFFFFFFF L, H# 10000000 L, 0 L, -H# 4DC ( OV0_FLAG_CNTRL ) L, H# FFFFFEFF L, H# 00000100 L, 0 L, -H# 034 ( BUS_CNTL1 ) L, H# 73FFFFFF L, H# 84000000 L, 0 L, -H# 174 ( AGP_CNTL ) L, H# FFEFFF00 L, H# 001E0000 L, 0 L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFF9 L, H# 00000006 L, h# 000A L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFB L, H# 00000000 L, H# 000A L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFD L, H# 00000000 L, 0 L, - -here INIT2_ARRAY - /L / CONSTANT INIT2_LENGTH - -CREATE PLLINIT_ARRAY - -H# 0D L, H# FFFFFFFF L, H# FFFF8000 L, 0 L, -H# 12 L, H# FFFFFFFF L, H# 00350000 L, 0 L, -H# 08 L, H# FFFFFFFF L, H# 00000000 L, 0 L, -H# 2D L, H# FFFFFFFF L, H# 00000000 L, 0 L, -H# 1F L, H# FFFFFFFF L, H# 0000000A L, 5 L, -H# 03 L, H# FFFFFFFF L, H# 0000003C L, 0 L, -H# 0A L, H# FFFFFFFF L, H# 00252504 L, 0 L, -H# 25 L, H# FFFFFFFF L, H# 00000005 L, 0 L, -H# 0E L, H# FFFFFFFF L, H# 04756400 L, 0 L, -H# 0C L, H# FFFFFFFF L, H# 04006401 L, 0 L, -H# 02 L, H# FFFFFFFF L, H# 0000A703 L, 0 L, -H# 0F L, H# FFFFFFFF L, H# 0000051C L, 0 L, -H# 10 L, H# FFFFFFFF L, H# 04000400 L, 5 L, -H# 0E L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 0E L, H# FFFFFFFE L, H# 00000000 L, 5 L, -H# 12 L, H# FFFFFFFF L, H# 00350012 L, 5 L, -H# 0F L, H# FFFFFFFE L, H# 00000000 L, 6 L, -H# 10 L, H# FFFFFFFE L, H# 00000000 L, 5 L, -H# 10 L, H# FFFEFFFF L, H# 00000000 L, 6 L, -H# 0F L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 10 L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 10 L, H# FFFDFFFF L, H# 00000000 L, d# 10 L, -H# 0C L, H# FFFFFFFE L, H# 00000000 L, 6 L, -H# 0C L, H# FFFFFFFD L, H# 00000000 L, 5 L, -h# 0D L, H# FFFFFFFF L, H# FFFF8007 L, 5 L, -H# 08 L, H# FFFFFF3C L, H# 00000000 L, 0 L, -H# 02 L, H# FFFFFFFF L, H# 00000003 L, 0 L, -H# 04 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, -H# 05 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, -H# 06 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, -H# 07 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, -H# 02 L, H# FFFFFFFD L, H# 00000000 L, 6 L, -H# 02 L, H# FFFFFFFE L, H# 00000000 L, 5 L, -h# 08 L, H# FFFFFF3C L, H# 00000003 L, 5 L, -H# 0B L, H# FFFFFFFF L, H# 78000800 L, 0 L, -H# 0B L, H# FFFFFFFF L, H# 00004000 L, 0 L, -h# 01 L, h# FFFFFFFF L, H# 00000010 L, 0 L, - -here PLLINIT_ARRAY - /L / CONSTANT PLLINIT_LENGTH - -CREATE MEMINIT_ARRAY -h# 6FFF0000 L, H# 00004000 L, H# 6FFF0000 L, H# 80004000 L, -h# 6FFF0000 L, H# 00000132 L, H# 6FFF0000 L, H# 80000132 L, -h# 6FFF0000 L, H# 00000032 L, H# 6FFF0000 L, H# 80000032 L, -h# 6FFF0000 L, H# 10000032 L, -here MEMINIT_ARRAY - /L / CONSTANT MEMINIT_LENGTH -: L@+ ( addr -- value addr' ) - -dup l@ swap la1+ -; - -0 VALUE _len - -: ENCODE-ARRAY ( array len -- ) - dup to _len 0 do l@+ swap encode-int rot loop - drop _len 1 - 0 ?do encode+ loop -; - -: andorset ( reg and or -- ) - 2 pick dup reg-rl@ - 3 pick AND 2 pick OR swap reg-rl! 3drop -; - -: INIT1 -H# 0F8 ( CONFIG_MEMSIZE ) H# 00000000 H# 01000000 andorset \ Set 16Mb memory size -H# 1C0 ( MPP_TB_CONFIG ) H# 00FFFFFF H# 07000000 andorset -H# 030 ( BUS_CNTL ) H# 00000000 H# 5133A3B0 andorset -H# 0EC ( RBBM_CNTL ) H# 00000000 h# 00004443 andorset -H# 1D0 ( DEBUG_CNTL ) H# FFFFFFFD H# 00000002 andorset -H# 050 ( CRTC_GEN_CNTL ) H# 00000000 H# 04000000 andorset -H# 058 ( DAC_CNTL ) H# 00000000 H# FF604102 andorset -H# 168 ( PAD_CTLR_STRENGTH ) H# FFFEFFFF H# 00001200 andorset -H# 178 ( MEM_REFRESH_CNTL ) H# 00000000 H# 88888888 andorset -H# 17C ( MEM_READ_CNTL ) H# 00000000 H# B7C20000 andorset -H# 188 ( MC_DEBUG ) H# FFFFFFFF H# 00000000 andorset -H# D00 ( DISP_MISC_CNTL) H# 00FFFFFF H# 5B000000 andorset -H# 88C ( TV_DAC_CNTL ) H# F800FCEF H# 00490200 andorset -H# D04 ( DAC_MACRO_CNTL) H# 00000000 H# 00000905 andorset -H# 284 ( FP_GEN_CNTL ) H# FFFFFFFF H# 00000008 andorset -H# 030 ( BUS_CNTL ) H# FFFFFFEF H# 00000000 andorset -; - - -: INIT2 -H# 140 ( MEM_CNTL ) H# 00000000 H# 38001A01 andorset -H# 158 ( MEM_SDRAM_MODE_REG ) H# E0000000 H# 08320032 andorset -H# 144 ( MEM_TIMING_CNTL ) H# 00000000 H# 20123833 andorset -H# 14C ( MC_AGP_LOCATION ) H# 00000000 H# 000FFFF0 andorset -H# 148 ( MC_FB_LOCATION ) H# 00000000 H# FFFF0000 andorset -H# 154 ( MEM_INIT_LAT_TIMER ) H# 00000000 H# 34444444 andorset -H# 18C ( MC_CHP_IO_OE_CNTL ) H# 00000000 H# 0A540002 andorset -H# 910 ( FCP_CNTL ) H# 00000000 H# 00000004 andorset -H# 010 ( BIOS_0_SCRATCH ) H# FFFFFFFB H# 00000004 andorset -H# D64 ( DISP_OUTPUT_CNTL ) H# FFFFFBFF H# 00000000 andorset -H# 2A8 ( TMDS_PLL_CNTL ) H# 00000000 H# 00000A1B andorset -H# 800 ( TV_MASTER_CNTL ) H# BFFFFFFF H# 40000000 andorset -H# D10 ( DISP_TEST_DEBUG_CTL ) H# EFFFFFFF H# 10000000 andorset -H# 4DC ( OV0_FLAG_CNTRL ) H# FFFFFEFF H# 00000100 andorset -H# 034 ( BUS_CNTL1 ) H# 73FFFFFF H# 84000000 andorset -H# 174 ( AGP_CNTL ) H# FFEFFF00 H# 001E0000 andorset -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFF9 H# 00000006 andorset h# 000A ms -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFB H# 00000000 andorset H# 000A ms -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFD H# 00000000 andorset -; - -: CLK-CNTL-INDEX! 8 ( CLK_CNTL_INDEX ) reg-rl! ; - -: CLK-CNTL-INDEX@ 8 ( CLK_CNTL_INDEX ) reg-rl@ ; - -: PLLWRITEON clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) or clk-cntl-index! ; - -: PLLWRITEOFF clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) not and clk-cntl-index! ; \ Remove PLL_WR_ENABLE - -: CLKDATA! h# 0c ( CLK_CNTL_DATA ) reg-rl! ; - -: CLKDATA@ h# 0c ( CLK_CNTL_DATA ) reg-rl@ ; - -: PLLINDEXSET clk-cntl-index@ h# FFFFFFC0 and or clk-cntl-index! ; - -: PLLSET swap pllindexset clkdata! ; - -: pllandorset ( index and or -- ) - 2 pick pllindexset clkdata@ - 2 pick AND over OR clkdata! 3drop -; - -: PLLINIT -pllwriteon -H# 0D H# FFFF8000 pllset -H# 12 H# 00350000 pllset -H# 08 H# 00000000 pllset -H# 2D H# 00000000 pllset -H# 1F H# 0000000A pllset 5 ms - -H# 03 H# 0000003C pllset -H# 0A H# 00252504 pllset -H# 25 H# 00000005 pllset -H# 0E H# 04756400 pllset -H# 0C H# 04006401 pllset -H# 02 H# 0000A703 pllset -H# 0F H# 0000051C pllset -H# 10 H# 04000400 pllset 5 ms - -H# 0E H# FFFFFFFD 00 pllandorset 5 ms -H# 0E H# FFFFFFFE 00 pllandorset 5 ms -H# 12 H# 00350012 pllset 5 ms -H# 0F H# FFFFFFFE 00 pllandorset 6 ms -H# 10 H# FFFFFFFE 00 pllandorset 5 ms -H# 10 H# FFFEFFFF 00 pllandorset 6 ms -H# 0F H# FFFFFFFD 00 pllandorset 5 ms -H# 10 H# FFFFFFFD 00 pllandorset 5 ms -H# 10 H# FFFDFFFF 00 pllandorset d# 10 ms -H# 0C H# FFFFFFFE 00 pllandorset 6 ms -H# 0C H# FFFFFFFD 00 pllandorset 5 ms -h# 0D h# FFFF8007 pllset 5 ms -H# 08 H# FFFFFF3C 00 pllandorset -H# 02 h# FFFFFFFF 03 pllandorset -H# 04 H# 000381C0 pllset -H# 05 H# 000381F7 pllset -H# 06 H# 000381C0 pllset -H# 07 H# 000381F7 pllset -H# 02 H# FFFFFFFD 00 pllandorset 6 ms -H# 02 h# FFFFFFFE 00 pllandorset 5 ms -h# 08 H# FFFFFF3C 03 pllandorset 5 ms -H# 0B h# 78000800 pllset -H# 0B H# FFFFFFFF h# 4000 pllandorset -h# 01 h# FFFFFFFF h# 0010 pllandorset - -pllwriteoff -; - -: DYNCKE -pllwriteon -H# 14 H# FFFF3FFF H# 30 pllandorset -H# 14 H# FF1FFFFF H# 00 pllandorset -H# 01 h# FFFFFFFF h# 80 pllandorset -H# 0D H# 00000007 pllset 5 ms -h# 2D H# 0000F8C0 pllset -h# 08 H# FFFFFFFF h# C0 pllandorset 5 ms -pllwriteoff -; - -: MEM-MODE@ - h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl@ ; - -: MEM-MODE! - h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl! ; - -: MEM-STATUS@ - H# 150 reg-rl@ ; - -: WAIT-MEM-CMPLT - h# 8000 0 do mem-status@ 3 and 3 = if leave then loop ; - -: INITMEM - - mem-mode@ h# 6FFF0000 and h# 4000 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80004000 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 0132 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80000132 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 0032 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80000032 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 10000032 or mem-mode! -; - - - -: CLR-REG ( reg -- ) - 0 swap reg-rl! - -; -: SET-PALETTE ( -- ) - h# 0 h# b0 pc! \ Reset PALETTE_INDEX - - d# 16 0 do - H# 000000 h# B4 reg-rl! \ Write the PALETTE_DATA ( Auto increments) - H# aa0000 H# B4 reg-rl! - H# 00aa00 H# B4 reg-rl! - H# aa5500 H# B4 reg-rl! - H# 0000aa H# B4 reg-rl! - H# aa00aa H# B4 reg-rl! - H# 00aaaa H# B4 reg-rl! - H# aaaaaa H# B4 reg-rl! - H# 555555 H# B4 reg-rl! - H# ff5555 H# B4 reg-rl! - H# 55ff55 H# B4 reg-rl! - H# ffff55 H# B4 reg-rl! - H# 5555ff H# B4 reg-rl! - H# ff55ff H# B4 reg-rl! - H# 55ffff H# B4 reg-rl! - H# ffffff H# B4 reg-rl! - loop - - ; - -0 VALUE _addr -0 VALUE _color - -: DO-COLOR ( color-addr addr color -- ) - to _color to _addr 0 to _color - 3 0 do _addr i + c@ 2 i - 8 * << _color + to _color loop - _color h# B4 reg-rl! -; - -: SET-COLORS ( addr index #indices -- ) - - swap h# B0 pc! - ( addr #indices ) 0 ?do dup ( index ) i 3 * + DO-COLOR loop - ( addr ) drop ; - -: init-card - - h# FF h# 58 3 + pc! \ - h# 59 pc@ h# FE and h# 59 pc! \ - h# 50 reg-rl@ H# FEFFFFFF AND h# 02000200 or \ Clear 24 set 25 and 8-11 to 2 - h# 50 reg-rl! - h# 4F0063 h# 200 reg-rl! - H# 8C02A2 h# 204 reg-rl! - H# 1Df020C h# 208 reg-rl! - h# 8201EA h# 20C reg-rl! - h# 50 reg-rl@ H# F8FFFFFF AND h# 03000000 or h# 50 reg-rl! - h# 50 h# 22C reg-rl! - set-palette - - \ at this point for some reason mem-addr does not point - \ to the right address and therefore the following command - \ which should probably clean the frame buffer just - \ overwrites everything starting from 0 including the - \ exception vectors - - \ mem-addr h# F0000 0 fill - ; - -: DO-INIT - early-map - enable-card - init1 - pllinit - init2 - initmem - init-card - h# 8020 h# 54 reg-rl! - early-unmap -; - -d# 640 constant /scanline -d# 480 constant #scanlines -/scanline #scanlines * constant /fb - -" okay" encode-string " status" property - -: display-install ( -- ) - is_installed not if - map-csr-base - enable-card - mem-addr to frame-buffer-adr - h# 8020 h# 54 reg-rl! - default-font set-font - /scanline #scanlines d# 100 d# 40 fb8-install - true to is_installed - then -; - -: display-remove ( -- ) ; - -do-init \ Set up the card -\ clear at least 640x480 -10 config-l@ 8 - F0000 0 rfill -init1_array init1_length encode-array " ibm,init1" property -init2_array init2_length encode-array " ibm,init2" property -pllinit_array pllinit_length encode-array " ibm,pllinit" property -meminit_array meminit_length encode-array " ibm,meminit" property -0 0 encode-bytes " iso6429-1983-colors" property -s" display" device-type -/scanline encode-int " width" property - #scanlines encode-int " height" property -8 encode-int " depth" property -/scanline encode-int " linebytes" property - -' display-install is-install -' display-remove is-remove - -: fill-rectangle ( index x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( index w h fbadr ) - swap 0 ?do ( index w fbadr ) - 3dup swap rot fill ( index w fbadr ) - /scanline + ( index w fbadr' ) - loop - 3drop -; -: draw-rectangle ( addr x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) - swap 0 ?do ( addr w fbadr ) - 3dup swap move ( addr w fbadr ) - >r tuck + swap r> ( addr' w fbadr ) - /scanline + ( addr' w fbadr' ) - loop - 3drop - ; - : read-rectangle ( addr x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) - swap 0 ?do ( addr w fbadr ) - 3dup -rot move ( addr w fbadr ) - >r tuck + swap r> ( addr' w fbadr ) - /scanline + ( addr' w fbadr' ) - loop - 3drop - ; - -: dimensions ( -- width height ) /scanline #scanlines ; - -." ( rn50 )" cr |