1 files changed, 101 insertions, 0 deletions
diff --git a/qemu/roms/SLOF/board-js2x/slof/attu.fs b/qemu/roms/SLOF/board-js2x/slof/attu.fs
new file mode 100644
index 000000000..cc1225296
--- /dev/null
+++ b/qemu/roms/SLOF/board-js2x/slof/attu.fs
@@ -0,0 +1,101 @@
+\ *****************************************************************************
+\ * Copyright (c) 2004, 2008 IBM Corporation
+\ * All rights reserved.
+\ * This program and the accompanying materials
+\ * are made available under the terms of the BSD License
+\ * which accompanies this distribution, and is available at
+\ * http://www.opensource.org/licenses/bsd-license.php
+\ *
+\ * Contributors:
+\ *     IBM Corporation - initial implementation
+\ ****************************************************************************/
+
+\ U4 "Attu" PCIe root complex.
+
+\ See the PCI OF binding document.
+
+new-device
+
+s" pciex" device-name s" pci" device-type
+s" U4-pcie" compatible
+s" U4" encode-string s" model" property
+
+\ spare out 0xc0000000-0xefffffff for pcie
+f8070200 rl@ fffffff0 and f8070200 rl!
+\ enable io memory for pcie @ c0000000-efffffff
+70000003 f80903f0 rl!-le
+
+3 encode-int s" #address-cells" property
+2 encode-int s" #size-cells" property
+
+s" /mpic" find-node encode-int s" interrupt-parent" property
+\ XXX should have interrupt map, etc.  this works for now though.
+
+: decode-unit  2 hex-decode-unit  3 #join  8 lshift  0 0 rot F00000 + ;
+: encode-unit  nip nip  ff00 and 8 rshift  3 #split
+               over IF 2 ELSE nip 1 THEN hex-encode-unit ;
+
+f1000000 CONSTANT my-puid
+\ Configuration space accesses.
+: >config  f1000000 + ;
+: config-l!  >config rl!-le ;
+: config-l@  >config rl@-le ;
+: config-w!  >config rw!-le ;
+: config-w@  >config rw@-le ;
+: config-b!  >config rb! ;
+: config-b@  >config rb@ ;
+
+: config-dump ( addr size -- )  ['] config-l@ 4 (dump) ;
+
+\ 16MB of configuration space
+f1000000 encode-64 1000000 encode-64+ s" reg" property
+
+\ 4MB of I/O space.
+01000000 encode-int  00000000 encode-int+ 00000000 encode-int+ 
+00000000 encode-int+ f0000000 encode-int+ 
+00000000 encode-int+ 00400000 encode-int+
+
+\ 1.75GB of memory space @ c0000000.
+02000000 encode-int+ c0000000 encode-64+
+c0000000 encode-64+  30000000 encode-64+ s" ranges" property
+
+\ Host bridge, so full bus range.
+f0 encode-int ff encode-int+ s" bus-range" property
+
+: open  true ;
+: close ;
+
+\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- )
+s" /mpic" find-node my-puid pci-irq-init drop
+
+00fff1f0 18 config-l!
+
+ff F0 f0000000 e8000000 e8000000 c0000000 100000000 f000
+my-puid probe-pci-host-bridge
+
+\ \ PCIe debug / fixup
+: find-pcie-cap  ( devfn -- offset | 0 )
+   >r 34  BEGIN  r@ + config-b@ dup ff <> over and  WHILE
+       dup r@ + config-b@ 10 =  IF
+          r> drop EXIT
+       THEN 1+
+   REPEAT r> 2drop 0
+;
+
+ : (set-ps) ( ps addr -- )
+   8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ;
+ : set-ps ( ps -- )
+   log2 7 -
+   10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF
+   + 2dup (set-ps) THEN drop LOOP drop ;
+ 
+ : (set-rr) ( rr addr -- )
+   8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ;
+ : set-rr ( rr -- )
+   log2 7 -
+   10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF
+   + 2dup (set-rr) THEN drop LOOP drop ;
+
+80 set-ps  80 set-rr  
+
+finish-device