diff options
Diffstat (limited to 'qemu/include/standard-headers/linux')
18 files changed, 3510 insertions, 0 deletions
diff --git a/qemu/include/standard-headers/linux/if_ether.h b/qemu/include/standard-headers/linux/if_ether.h new file mode 100644 index 000000000..91cf735fb --- /dev/null +++ b/qemu/include/standard-headers/linux/if_ether.h @@ -0,0 +1 @@ +#define ETH_ALEN 6 diff --git a/qemu/include/standard-headers/linux/input.h b/qemu/include/standard-headers/linux/input.h new file mode 100644 index 000000000..b003c6705 --- /dev/null +++ b/qemu/include/standard-headers/linux/input.h @@ -0,0 +1,1203 @@ +/* + * Copyright (c) 1999-2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _INPUT_H +#define _INPUT_H + + +#include <sys/time.h> +#include <sys/types.h> +#include "standard-headers/linux/types.h" + + +/* + * The event structure itself + */ + +struct input_event { + struct timeval time; + uint16_t type; + uint16_t code; + int32_t value; +}; + +/* + * Protocol version. + */ + +#define EV_VERSION 0x010001 + +/* + * IOCTLs (0x00 - 0x7f) + */ + +struct input_id { + uint16_t bustype; + uint16_t vendor; + uint16_t product; + uint16_t version; +}; + +/** + * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls + * @value: latest reported value for the axis. + * @minimum: specifies minimum value for the axis. + * @maximum: specifies maximum value for the axis. + * @fuzz: specifies fuzz value that is used to filter noise from + * the event stream. + * @flat: values that are within this value will be discarded by + * joydev interface and reported as 0 instead. + * @resolution: specifies resolution for the values reported for + * the axis. + * + * Note that input core does not clamp reported values to the + * [minimum, maximum] limits, such task is left to userspace. + * + * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in + * units per millimeter (units/mm), resolution for rotational axes + * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. + */ +struct input_absinfo { + int32_t value; + int32_t minimum; + int32_t maximum; + int32_t fuzz; + int32_t flat; + int32_t resolution; +}; + +/** + * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls + * @scancode: scancode represented in machine-endian form. + * @len: length of the scancode that resides in @scancode buffer. + * @index: index in the keymap, may be used instead of scancode + * @flags: allows to specify how kernel should handle the request. For + * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel + * should perform lookup in keymap by @index instead of @scancode + * @keycode: key code assigned to this scancode + * + * The structure is used to retrieve and modify keymap data. Users have + * option of performing lookup either by @scancode itself or by @index + * in keymap entry. EVIOCGKEYCODE will also return scancode or index + * (depending on which element was used to perform lookup). + */ +struct input_keymap_entry { +#define INPUT_KEYMAP_BY_INDEX (1 << 0) + uint8_t flags; + uint8_t len; + uint16_t index; + uint32_t keycode; + uint8_t scancode[32]; +}; + +#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ +#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ +#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ +#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ + +#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ +#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) +#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ +#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) + +#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ +#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ +#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ +#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ + +/** + * EVIOCGMTSLOTS(len) - get MT slot values + * @len: size of the data buffer in bytes + * + * The ioctl buffer argument should be binary equivalent to + * + * struct input_mt_request_layout { + * uint32_t code; + * int32_t values[num_slots]; + * }; + * + * where num_slots is the (arbitrary) number of MT slots to extract. + * + * The ioctl size argument (len) is the size of the buffer, which + * should satisfy len = (num_slots + 1) * sizeof(int32_t). If len is + * too small to fit all available slots, the first num_slots are + * returned. + * + * Before the call, code is set to the wanted ABS_MT event type. On + * return, values[] is filled with the slot values for the specified + * ABS_MT code. + * + * If the request code is not an ABS_MT value, -EINVAL is returned. + */ +#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) + +#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ +#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ +#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ +#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ + +#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ +#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ +#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ + +#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ +#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ +#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ + +#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ +#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ + +#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ + +/* + * Device properties and quirks + */ + +#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ +#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ +#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ +#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ +#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ +#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ +#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ + +#define INPUT_PROP_MAX 0x1f +#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) + +/* + * Event types + */ + +#define EV_SYN 0x00 +#define EV_KEY 0x01 +#define EV_REL 0x02 +#define EV_ABS 0x03 +#define EV_MSC 0x04 +#define EV_SW 0x05 +#define EV_LED 0x11 +#define EV_SND 0x12 +#define EV_REP 0x14 +#define EV_FF 0x15 +#define EV_PWR 0x16 +#define EV_FF_STATUS 0x17 +#define EV_MAX 0x1f +#define EV_CNT (EV_MAX+1) + +/* + * Synchronization events. + */ + +#define SYN_REPORT 0 +#define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 +#define SYN_DROPPED 3 +#define SYN_MAX 0xf +#define SYN_CNT (SYN_MAX+1) + +/* + * Keys and buttons + * + * Most of the keys/buttons are modeled after USB HUT 1.12 + * (see http://www.usb.org/developers/hidpage). + * Abbreviations in the comments: + * AC - Application Control + * AL - Application Launch Button + * SC - System Control + */ + +#define KEY_RESERVED 0 +#define KEY_ESC 1 +#define KEY_1 2 +#define KEY_2 3 +#define KEY_3 4 +#define KEY_4 5 +#define KEY_5 6 +#define KEY_6 7 +#define KEY_7 8 +#define KEY_8 9 +#define KEY_9 10 +#define KEY_0 11 +#define KEY_MINUS 12 +#define KEY_EQUAL 13 +#define KEY_BACKSPACE 14 +#define KEY_TAB 15 +#define KEY_Q 16 +#define KEY_W 17 +#define KEY_E 18 +#define KEY_R 19 +#define KEY_T 20 +#define KEY_Y 21 +#define KEY_U 22 +#define KEY_I 23 +#define KEY_O 24 +#define KEY_P 25 +#define KEY_LEFTBRACE 26 +#define KEY_RIGHTBRACE 27 +#define KEY_ENTER 28 +#define KEY_LEFTCTRL 29 +#define KEY_A 30 +#define KEY_S 31 +#define KEY_D 32 +#define KEY_F 33 +#define KEY_G 34 +#define KEY_H 35 +#define KEY_J 36 +#define KEY_K 37 +#define KEY_L 38 +#define KEY_SEMICOLON 39 +#define KEY_APOSTROPHE 40 +#define KEY_GRAVE 41 +#define KEY_LEFTSHIFT 42 +#define KEY_BACKSLASH 43 +#define KEY_Z 44 +#define KEY_X 45 +#define KEY_C 46 +#define KEY_V 47 +#define KEY_B 48 +#define KEY_N 49 +#define KEY_M 50 +#define KEY_COMMA 51 +#define KEY_DOT 52 +#define KEY_SLASH 53 +#define KEY_RIGHTSHIFT 54 +#define KEY_KPASTERISK 55 +#define KEY_LEFTALT 56 +#define KEY_SPACE 57 +#define KEY_CAPSLOCK 58 +#define KEY_F1 59 +#define KEY_F2 60 +#define KEY_F3 61 +#define KEY_F4 62 +#define KEY_F5 63 +#define KEY_F6 64 +#define KEY_F7 65 +#define KEY_F8 66 +#define KEY_F9 67 +#define KEY_F10 68 +#define KEY_NUMLOCK 69 +#define KEY_SCROLLLOCK 70 +#define KEY_KP7 71 +#define KEY_KP8 72 +#define KEY_KP9 73 +#define KEY_KPMINUS 74 +#define KEY_KP4 75 +#define KEY_KP5 76 +#define KEY_KP6 77 +#define KEY_KPPLUS 78 +#define KEY_KP1 79 +#define KEY_KP2 80 +#define KEY_KP3 81 +#define KEY_KP0 82 +#define KEY_KPDOT 83 + +#define KEY_ZENKAKUHANKAKU 85 +#define KEY_102ND 86 +#define KEY_F11 87 +#define KEY_F12 88 +#define KEY_RO 89 +#define KEY_KATAKANA 90 +#define KEY_HIRAGANA 91 +#define KEY_HENKAN 92 +#define KEY_KATAKANAHIRAGANA 93 +#define KEY_MUHENKAN 94 +#define KEY_KPJPCOMMA 95 +#define KEY_KPENTER 96 +#define KEY_RIGHTCTRL 97 +#define KEY_KPSLASH 98 +#define KEY_SYSRQ 99 +#define KEY_RIGHTALT 100 +#define KEY_LINEFEED 101 +#define KEY_HOME 102 +#define KEY_UP 103 +#define KEY_PAGEUP 104 +#define KEY_LEFT 105 +#define KEY_RIGHT 106 +#define KEY_END 107 +#define KEY_DOWN 108 +#define KEY_PAGEDOWN 109 +#define KEY_INSERT 110 +#define KEY_DELETE 111 +#define KEY_MACRO 112 +#define KEY_MUTE 113 +#define KEY_VOLUMEDOWN 114 +#define KEY_VOLUMEUP 115 +#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_KPEQUAL 117 +#define KEY_KPPLUSMINUS 118 +#define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ + +#define KEY_KPCOMMA 121 +#define KEY_HANGEUL 122 +#define KEY_HANGUEL KEY_HANGEUL +#define KEY_HANJA 123 +#define KEY_YEN 124 +#define KEY_LEFTMETA 125 +#define KEY_RIGHTMETA 126 +#define KEY_COMPOSE 127 + +#define KEY_STOP 128 /* AC Stop */ +#define KEY_AGAIN 129 +#define KEY_PROPS 130 /* AC Properties */ +#define KEY_UNDO 131 /* AC Undo */ +#define KEY_FRONT 132 +#define KEY_COPY 133 /* AC Copy */ +#define KEY_OPEN 134 /* AC Open */ +#define KEY_PASTE 135 /* AC Paste */ +#define KEY_FIND 136 /* AC Search */ +#define KEY_CUT 137 /* AC Cut */ +#define KEY_HELP 138 /* AL Integrated Help Center */ +#define KEY_MENU 139 /* Menu (show menu) */ +#define KEY_CALC 140 /* AL Calculator */ +#define KEY_SETUP 141 +#define KEY_SLEEP 142 /* SC System Sleep */ +#define KEY_WAKEUP 143 /* System Wake Up */ +#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SENDFILE 145 +#define KEY_DELETEFILE 146 +#define KEY_XFER 147 +#define KEY_PROG1 148 +#define KEY_PROG2 149 +#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_MSDOS 151 +#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ +#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */ +#define KEY_DIRECTION KEY_ROTATE_DISPLAY +#define KEY_CYCLEWINDOWS 154 +#define KEY_MAIL 155 +#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_COMPUTER 157 +#define KEY_BACK 158 /* AC Back */ +#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_CLOSECD 160 +#define KEY_EJECTCD 161 +#define KEY_EJECTCLOSECD 162 +#define KEY_NEXTSONG 163 +#define KEY_PLAYPAUSE 164 +#define KEY_PREVIOUSSONG 165 +#define KEY_STOPCD 166 +#define KEY_RECORD 167 +#define KEY_REWIND 168 +#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_ISO 170 +#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ +#define KEY_HOMEPAGE 172 /* AC Home */ +#define KEY_REFRESH 173 /* AC Refresh */ +#define KEY_EXIT 174 /* AC Exit */ +#define KEY_MOVE 175 +#define KEY_EDIT 176 +#define KEY_SCROLLUP 177 +#define KEY_SCROLLDOWN 178 +#define KEY_KPLEFTPAREN 179 +#define KEY_KPRIGHTPAREN 180 +#define KEY_NEW 181 /* AC New */ +#define KEY_REDO 182 /* AC Redo/Repeat */ + +#define KEY_F13 183 +#define KEY_F14 184 +#define KEY_F15 185 +#define KEY_F16 186 +#define KEY_F17 187 +#define KEY_F18 188 +#define KEY_F19 189 +#define KEY_F20 190 +#define KEY_F21 191 +#define KEY_F22 192 +#define KEY_F23 193 +#define KEY_F24 194 + +#define KEY_PLAYCD 200 +#define KEY_PAUSECD 201 +#define KEY_PROG3 202 +#define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_SUSPEND 205 +#define KEY_CLOSE 206 /* AC Close */ +#define KEY_PLAY 207 +#define KEY_FASTFORWARD 208 +#define KEY_BASSBOOST 209 +#define KEY_PRINT 210 /* AC Print */ +#define KEY_HP 211 +#define KEY_CAMERA 212 +#define KEY_SOUND 213 +#define KEY_QUESTION 214 +#define KEY_EMAIL 215 +#define KEY_CHAT 216 +#define KEY_SEARCH 217 +#define KEY_CONNECT 218 +#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_SPORT 220 +#define KEY_SHOP 221 +#define KEY_ALTERASE 222 +#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_BRIGHTNESSDOWN 224 +#define KEY_BRIGHTNESSUP 225 +#define KEY_MEDIA 226 + +#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video + outputs (Monitor/LCD/TV-out/etc) */ +#define KEY_KBDILLUMTOGGLE 228 +#define KEY_KBDILLUMDOWN 229 +#define KEY_KBDILLUMUP 230 + +#define KEY_SEND 231 /* AC Send */ +#define KEY_REPLY 232 /* AC Reply */ +#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ +#define KEY_SAVE 234 /* AC Save */ +#define KEY_DOCUMENTS 235 + +#define KEY_BATTERY 236 + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define KEY_UNKNOWN 240 + +#define KEY_VIDEO_NEXT 241 /* drive next video source */ +#define KEY_VIDEO_PREV 242 /* drive previous video source */ +#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ +#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual + brightness control is off, + rely on ambient */ +#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO +#define KEY_DISPLAY_OFF 245 /* display device to off state */ + +#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */ +#define KEY_WIMAX KEY_WWAN +#define KEY_RFKILL 247 /* Key that controls all radios */ + +#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ + +/* Code 255 is reserved for special needs of AT keyboard driver */ + +#define BTN_MISC 0x100 +#define BTN_0 0x100 +#define BTN_1 0x101 +#define BTN_2 0x102 +#define BTN_3 0x103 +#define BTN_4 0x104 +#define BTN_5 0x105 +#define BTN_6 0x106 +#define BTN_7 0x107 +#define BTN_8 0x108 +#define BTN_9 0x109 + +#define BTN_MOUSE 0x110 +#define BTN_LEFT 0x110 +#define BTN_RIGHT 0x111 +#define BTN_MIDDLE 0x112 +#define BTN_SIDE 0x113 +#define BTN_EXTRA 0x114 +#define BTN_FORWARD 0x115 +#define BTN_BACK 0x116 +#define BTN_TASK 0x117 + +#define BTN_JOYSTICK 0x120 +#define BTN_TRIGGER 0x120 +#define BTN_THUMB 0x121 +#define BTN_THUMB2 0x122 +#define BTN_TOP 0x123 +#define BTN_TOP2 0x124 +#define BTN_PINKIE 0x125 +#define BTN_BASE 0x126 +#define BTN_BASE2 0x127 +#define BTN_BASE3 0x128 +#define BTN_BASE4 0x129 +#define BTN_BASE5 0x12a +#define BTN_BASE6 0x12b +#define BTN_DEAD 0x12f + +#define BTN_GAMEPAD 0x130 +#define BTN_SOUTH 0x130 +#define BTN_A BTN_SOUTH +#define BTN_EAST 0x131 +#define BTN_B BTN_EAST +#define BTN_C 0x132 +#define BTN_NORTH 0x133 +#define BTN_X BTN_NORTH +#define BTN_WEST 0x134 +#define BTN_Y BTN_WEST +#define BTN_Z 0x135 +#define BTN_TL 0x136 +#define BTN_TR 0x137 +#define BTN_TL2 0x138 +#define BTN_TR2 0x139 +#define BTN_SELECT 0x13a +#define BTN_START 0x13b +#define BTN_MODE 0x13c +#define BTN_THUMBL 0x13d +#define BTN_THUMBR 0x13e + +#define BTN_DIGI 0x140 +#define BTN_TOOL_PEN 0x140 +#define BTN_TOOL_RUBBER 0x141 +#define BTN_TOOL_BRUSH 0x142 +#define BTN_TOOL_PENCIL 0x143 +#define BTN_TOOL_AIRBRUSH 0x144 +#define BTN_TOOL_FINGER 0x145 +#define BTN_TOOL_MOUSE 0x146 +#define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ +#define BTN_TOUCH 0x14a +#define BTN_STYLUS 0x14b +#define BTN_STYLUS2 0x14c +#define BTN_TOOL_DOUBLETAP 0x14d +#define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ + +#define BTN_WHEEL 0x150 +#define BTN_GEAR_DOWN 0x150 +#define BTN_GEAR_UP 0x151 + +#define KEY_OK 0x160 +#define KEY_SELECT 0x161 +#define KEY_GOTO 0x162 +#define KEY_CLEAR 0x163 +#define KEY_POWER2 0x164 +#define KEY_OPTION 0x165 +#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_TIME 0x167 +#define KEY_VENDOR 0x168 +#define KEY_ARCHIVE 0x169 +#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_CHANNEL 0x16b +#define KEY_FAVORITES 0x16c +#define KEY_EPG 0x16d +#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_MHP 0x16f +#define KEY_LANGUAGE 0x170 +#define KEY_TITLE 0x171 +#define KEY_SUBTITLE 0x172 +#define KEY_ANGLE 0x173 +#define KEY_ZOOM 0x174 +#define KEY_MODE 0x175 +#define KEY_KEYBOARD 0x176 +#define KEY_SCREEN 0x177 +#define KEY_PC 0x178 /* Media Select Computer */ +#define KEY_TV 0x179 /* Media Select TV */ +#define KEY_TV2 0x17a /* Media Select Cable */ +#define KEY_VCR 0x17b /* Media Select VCR */ +#define KEY_VCR2 0x17c /* VCR Plus */ +#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_SAT2 0x17e +#define KEY_CD 0x17f /* Media Select CD */ +#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_RADIO 0x181 +#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_PLAYER 0x183 +#define KEY_TEXT 0x184 +#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_AUX 0x186 +#define KEY_MP3 0x187 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ +#define KEY_DIRECTORY 0x18a +#define KEY_LIST 0x18b +#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_CALENDAR 0x18d +#define KEY_RED 0x18e +#define KEY_GREEN 0x18f +#define KEY_YELLOW 0x190 +#define KEY_BLUE 0x191 +#define KEY_CHANNELUP 0x192 /* Channel Increment */ +#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_FIRST 0x194 +#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_AB 0x196 +#define KEY_NEXT 0x197 +#define KEY_RESTART 0x198 +#define KEY_SLOW 0x199 +#define KEY_SHUFFLE 0x19a +#define KEY_BREAK 0x19b +#define KEY_PREVIOUS 0x19c +#define KEY_DIGITS 0x19d +#define KEY_TEEN 0x19e +#define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ +#define KEY_GAMES 0x1a1 /* Media Select Games */ +#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ +#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ +#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ +#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ +#define KEY_EDITOR 0x1a6 /* AL Text Editor */ +#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ +#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ +#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ +#define KEY_DATABASE 0x1aa /* AL Database App */ +#define KEY_NEWS 0x1ab /* AL Newsreader */ +#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ +#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ +#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE +#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ +#define KEY_LOGOFF 0x1b1 /* AL Logoff */ + +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + +#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ +#define KEY_FRAMEFORWARD 0x1b5 +#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ + +#define KEY_DEL_EOL 0x1c0 +#define KEY_DEL_EOS 0x1c1 +#define KEY_INS_LINE 0x1c2 +#define KEY_DEL_LINE 0x1c3 + +#define KEY_FN 0x1d0 +#define KEY_FN_ESC 0x1d1 +#define KEY_FN_F1 0x1d2 +#define KEY_FN_F2 0x1d3 +#define KEY_FN_F3 0x1d4 +#define KEY_FN_F4 0x1d5 +#define KEY_FN_F5 0x1d6 +#define KEY_FN_F6 0x1d7 +#define KEY_FN_F7 0x1d8 +#define KEY_FN_F8 0x1d9 +#define KEY_FN_F9 0x1da +#define KEY_FN_F10 0x1db +#define KEY_FN_F11 0x1dc +#define KEY_FN_F12 0x1dd +#define KEY_FN_1 0x1de +#define KEY_FN_2 0x1df +#define KEY_FN_D 0x1e0 +#define KEY_FN_E 0x1e1 +#define KEY_FN_F 0x1e2 +#define KEY_FN_S 0x1e3 +#define KEY_FN_B 0x1e4 + +#define KEY_BRL_DOT1 0x1f1 +#define KEY_BRL_DOT2 0x1f2 +#define KEY_BRL_DOT3 0x1f3 +#define KEY_BRL_DOT4 0x1f4 +#define KEY_BRL_DOT5 0x1f5 +#define KEY_BRL_DOT6 0x1f6 +#define KEY_BRL_DOT7 0x1f7 +#define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa + +#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ +#define KEY_NUMERIC_1 0x201 /* and other keypads */ +#define KEY_NUMERIC_2 0x202 +#define KEY_NUMERIC_3 0x203 +#define KEY_NUMERIC_4 0x204 +#define KEY_NUMERIC_5 0x205 +#define KEY_NUMERIC_6 0x206 +#define KEY_NUMERIC_7 0x207 +#define KEY_NUMERIC_8 0x208 +#define KEY_NUMERIC_9 0x209 +#define KEY_NUMERIC_STAR 0x20a +#define KEY_NUMERIC_POUND 0x20b +#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */ +#define KEY_NUMERIC_B 0x20d +#define KEY_NUMERIC_C 0x20e +#define KEY_NUMERIC_D 0x20f + +#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ +#define KEY_TOUCHPAD_ON 0x213 +#define KEY_TOUCHPAD_OFF 0x214 + +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + +#define KEY_ATTENDANT_ON 0x21b +#define KEY_ATTENDANT_OFF 0x21c +#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ +#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ + +#define BTN_DPAD_UP 0x220 +#define BTN_DPAD_DOWN 0x221 +#define BTN_DPAD_LEFT 0x222 +#define BTN_DPAD_RIGHT 0x223 + +#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ + +#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */ +#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */ +#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */ +#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */ +#define KEY_APPSELECT 0x244 /* AL Select Task/Application */ +#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ +#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ + +#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ +#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ + +#define KEY_KBDINPUTASSIST_PREV 0x260 +#define KEY_KBDINPUTASSIST_NEXT 0x261 +#define KEY_KBDINPUTASSIST_PREVGROUP 0x262 +#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263 +#define KEY_KBDINPUTASSIST_ACCEPT 0x264 +#define KEY_KBDINPUTASSIST_CANCEL 0x265 + +#define BTN_TRIGGER_HAPPY 0x2c0 +#define BTN_TRIGGER_HAPPY1 0x2c0 +#define BTN_TRIGGER_HAPPY2 0x2c1 +#define BTN_TRIGGER_HAPPY3 0x2c2 +#define BTN_TRIGGER_HAPPY4 0x2c3 +#define BTN_TRIGGER_HAPPY5 0x2c4 +#define BTN_TRIGGER_HAPPY6 0x2c5 +#define BTN_TRIGGER_HAPPY7 0x2c6 +#define BTN_TRIGGER_HAPPY8 0x2c7 +#define BTN_TRIGGER_HAPPY9 0x2c8 +#define BTN_TRIGGER_HAPPY10 0x2c9 +#define BTN_TRIGGER_HAPPY11 0x2ca +#define BTN_TRIGGER_HAPPY12 0x2cb +#define BTN_TRIGGER_HAPPY13 0x2cc +#define BTN_TRIGGER_HAPPY14 0x2cd +#define BTN_TRIGGER_HAPPY15 0x2ce +#define BTN_TRIGGER_HAPPY16 0x2cf +#define BTN_TRIGGER_HAPPY17 0x2d0 +#define BTN_TRIGGER_HAPPY18 0x2d1 +#define BTN_TRIGGER_HAPPY19 0x2d2 +#define BTN_TRIGGER_HAPPY20 0x2d3 +#define BTN_TRIGGER_HAPPY21 0x2d4 +#define BTN_TRIGGER_HAPPY22 0x2d5 +#define BTN_TRIGGER_HAPPY23 0x2d6 +#define BTN_TRIGGER_HAPPY24 0x2d7 +#define BTN_TRIGGER_HAPPY25 0x2d8 +#define BTN_TRIGGER_HAPPY26 0x2d9 +#define BTN_TRIGGER_HAPPY27 0x2da +#define BTN_TRIGGER_HAPPY28 0x2db +#define BTN_TRIGGER_HAPPY29 0x2dc +#define BTN_TRIGGER_HAPPY30 0x2dd +#define BTN_TRIGGER_HAPPY31 0x2de +#define BTN_TRIGGER_HAPPY32 0x2df +#define BTN_TRIGGER_HAPPY33 0x2e0 +#define BTN_TRIGGER_HAPPY34 0x2e1 +#define BTN_TRIGGER_HAPPY35 0x2e2 +#define BTN_TRIGGER_HAPPY36 0x2e3 +#define BTN_TRIGGER_HAPPY37 0x2e4 +#define BTN_TRIGGER_HAPPY38 0x2e5 +#define BTN_TRIGGER_HAPPY39 0x2e6 +#define BTN_TRIGGER_HAPPY40 0x2e7 + +/* We avoid low common keys in module aliases so they don't get huge. */ +#define KEY_MIN_INTERESTING KEY_MUTE +#define KEY_MAX 0x2ff +#define KEY_CNT (KEY_MAX+1) + +/* + * Relative axes + */ + +#define REL_X 0x00 +#define REL_Y 0x01 +#define REL_Z 0x02 +#define REL_RX 0x03 +#define REL_RY 0x04 +#define REL_RZ 0x05 +#define REL_HWHEEL 0x06 +#define REL_DIAL 0x07 +#define REL_WHEEL 0x08 +#define REL_MISC 0x09 +#define REL_MAX 0x0f +#define REL_CNT (REL_MAX+1) + +/* + * Absolute axes + */ + +#define ABS_X 0x00 +#define ABS_Y 0x01 +#define ABS_Z 0x02 +#define ABS_RX 0x03 +#define ABS_RY 0x04 +#define ABS_RZ 0x05 +#define ABS_THROTTLE 0x06 +#define ABS_RUDDER 0x07 +#define ABS_WHEEL 0x08 +#define ABS_GAS 0x09 +#define ABS_BRAKE 0x0a +#define ABS_HAT0X 0x10 +#define ABS_HAT0Y 0x11 +#define ABS_HAT1X 0x12 +#define ABS_HAT1Y 0x13 +#define ABS_HAT2X 0x14 +#define ABS_HAT2Y 0x15 +#define ABS_HAT3X 0x16 +#define ABS_HAT3Y 0x17 +#define ABS_PRESSURE 0x18 +#define ABS_DISTANCE 0x19 +#define ABS_TILT_X 0x1a +#define ABS_TILT_Y 0x1b +#define ABS_TOOL_WIDTH 0x1c + +#define ABS_VOLUME 0x20 + +#define ABS_MISC 0x28 + +#define ABS_MT_SLOT 0x2f /* MT slot being modified */ +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ +#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ +#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ +#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ + + +#define ABS_MAX 0x3f +#define ABS_CNT (ABS_MAX+1) + +/* + * Switch events + */ + +#define SW_LID 0x00 /* set = lid shut */ +#define SW_TABLET_MODE 0x01 /* set = tablet mode */ +#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ +#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ +#define SW_DOCK 0x05 /* set = plugged into dock */ +#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ +#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ +#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ +#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ +#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ +#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ +#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_LINEIN_INSERT 0x0d /* set = inserted */ +#define SW_MUTE_DEVICE 0x0e /* set = device disabled */ +#define SW_MAX 0x0f +#define SW_CNT (SW_MAX+1) + +/* + * Misc events + */ + +#define MSC_SERIAL 0x00 +#define MSC_PULSELED 0x01 +#define MSC_GESTURE 0x02 +#define MSC_RAW 0x03 +#define MSC_SCAN 0x04 +#define MSC_TIMESTAMP 0x05 +#define MSC_MAX 0x07 +#define MSC_CNT (MSC_MAX+1) + +/* + * LEDs + */ + +#define LED_NUML 0x00 +#define LED_CAPSL 0x01 +#define LED_SCROLLL 0x02 +#define LED_COMPOSE 0x03 +#define LED_KANA 0x04 +#define LED_SLEEP 0x05 +#define LED_SUSPEND 0x06 +#define LED_MUTE 0x07 +#define LED_MISC 0x08 +#define LED_MAIL 0x09 +#define LED_CHARGING 0x0a +#define LED_MAX 0x0f +#define LED_CNT (LED_MAX+1) + +/* + * Autorepeat values + */ + +#define REP_DELAY 0x00 +#define REP_PERIOD 0x01 +#define REP_MAX 0x01 +#define REP_CNT (REP_MAX+1) + +/* + * Sounds + */ + +#define SND_CLICK 0x00 +#define SND_BELL 0x01 +#define SND_TONE 0x02 +#define SND_MAX 0x07 +#define SND_CNT (SND_MAX+1) + +/* + * IDs. + */ + +#define ID_BUS 0 +#define ID_VENDOR 1 +#define ID_PRODUCT 2 +#define ID_VERSION 3 + +#define BUS_PCI 0x01 +#define BUS_ISAPNP 0x02 +#define BUS_USB 0x03 +#define BUS_HIL 0x04 +#define BUS_BLUETOOTH 0x05 +#define BUS_VIRTUAL 0x06 + +#define BUS_ISA 0x10 +#define BUS_I8042 0x11 +#define BUS_XTKBD 0x12 +#define BUS_RS232 0x13 +#define BUS_GAMEPORT 0x14 +#define BUS_PARPORT 0x15 +#define BUS_AMIGA 0x16 +#define BUS_ADB 0x17 +#define BUS_I2C 0x18 +#define BUS_HOST 0x19 +#define BUS_GSC 0x1A +#define BUS_ATARI 0x1B +#define BUS_SPI 0x1C + +/* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 +#define MT_TOOL_PALM 2 +#define MT_TOOL_MAX 2 + +/* + * Values describing the status of a force-feedback effect + */ +#define FF_STATUS_STOPPED 0x00 +#define FF_STATUS_PLAYING 0x01 +#define FF_STATUS_MAX 0x01 + +/* + * Structures used in ioctls to upload effects to a device + * They are pieces of a bigger structure (called ff_effect) + */ + +/* + * All duration values are expressed in ms. Values above 32767 ms (0x7fff) + * should not be used and have unspecified results. + */ + +/** + * struct ff_replay - defines scheduling of the force-feedback effect + * @length: duration of the effect + * @delay: delay before effect should start playing + */ +struct ff_replay { + uint16_t length; + uint16_t delay; +}; + +/** + * struct ff_trigger - defines what triggers the force-feedback effect + * @button: number of the button triggering the effect + * @interval: controls how soon the effect can be re-triggered + */ +struct ff_trigger { + uint16_t button; + uint16_t interval; +}; + +/** + * struct ff_envelope - generic force-feedback effect envelope + * @attack_length: duration of the attack (ms) + * @attack_level: level at the beginning of the attack + * @fade_length: duration of fade (ms) + * @fade_level: level at the end of fade + * + * The @attack_level and @fade_level are absolute values; when applying + * envelope force-feedback core will convert to positive/negative + * value based on polarity of the default level of the effect. + * Valid range for the attack and fade levels is 0x0000 - 0x7fff + */ +struct ff_envelope { + uint16_t attack_length; + uint16_t attack_level; + uint16_t fade_length; + uint16_t fade_level; +}; + +/** + * struct ff_constant_effect - defines parameters of a constant force-feedback effect + * @level: strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_constant_effect { + int16_t level; + struct ff_envelope envelope; +}; + +/** + * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect + * @start_level: beginning strength of the effect; may be negative + * @end_level: final strength of the effect; may be negative + * @envelope: envelope data + */ +struct ff_ramp_effect { + int16_t start_level; + int16_t end_level; + struct ff_envelope envelope; +}; + +/** + * struct ff_condition_effect - defines a spring or friction force-feedback effect + * @right_saturation: maximum level when joystick moved all way to the right + * @left_saturation: same for the left side + * @right_coeff: controls how fast the force grows when the joystick moves + * to the right + * @left_coeff: same for the left side + * @deadband: size of the dead zone, where no force is produced + * @center: position of the dead zone + */ +struct ff_condition_effect { + uint16_t right_saturation; + uint16_t left_saturation; + + int16_t right_coeff; + int16_t left_coeff; + + uint16_t deadband; + int16_t center; +}; + +/** + * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect + * @waveform: kind of the effect (wave) + * @period: period of the wave (ms) + * @magnitude: peak value + * @offset: mean value of the wave (roughly) + * @phase: 'horizontal' shift + * @envelope: envelope data + * @custom_len: number of samples (FF_CUSTOM only) + * @custom_data: buffer of samples (FF_CUSTOM only) + * + * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, + * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined + * for the time being as no driver supports it yet. + * + * Note: the data pointed by custom_data is copied by the driver. + * You can therefore dispose of the memory after the upload/update. + */ +struct ff_periodic_effect { + uint16_t waveform; + uint16_t period; + int16_t magnitude; + int16_t offset; + uint16_t phase; + + struct ff_envelope envelope; + + uint32_t custom_len; + int16_t *custom_data; +}; + +/** + * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect + * @strong_magnitude: magnitude of the heavy motor + * @weak_magnitude: magnitude of the light one + * + * Some rumble pads have two motors of different weight. Strong_magnitude + * represents the magnitude of the vibration generated by the heavy one. + */ +struct ff_rumble_effect { + uint16_t strong_magnitude; + uint16_t weak_magnitude; +}; + +/** + * struct ff_effect - defines force feedback effect + * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, + * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) + * @id: an unique id assigned to an effect + * @direction: direction of the effect + * @trigger: trigger conditions (struct ff_trigger) + * @replay: scheduling of the effect (struct ff_replay) + * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, + * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further + * defining effect parameters + * + * This structure is sent through ioctl from the application to the driver. + * To create a new effect application should set its @id to -1; the kernel + * will return assigned @id which can later be used to update or delete + * this effect. + * + * Direction of the effect is encoded as follows: + * 0 deg -> 0x0000 (down) + * 90 deg -> 0x4000 (left) + * 180 deg -> 0x8000 (up) + * 270 deg -> 0xC000 (right) + */ +struct ff_effect { + uint16_t type; + int16_t id; + uint16_t direction; + struct ff_trigger trigger; + struct ff_replay replay; + + union { + struct ff_constant_effect constant; + struct ff_ramp_effect ramp; + struct ff_periodic_effect periodic; + struct ff_condition_effect condition[2]; /* One for each axis */ + struct ff_rumble_effect rumble; + } u; +}; + +/* + * Force feedback effect types + */ + +#define FF_RUMBLE 0x50 +#define FF_PERIODIC 0x51 +#define FF_CONSTANT 0x52 +#define FF_SPRING 0x53 +#define FF_FRICTION 0x54 +#define FF_DAMPER 0x55 +#define FF_INERTIA 0x56 +#define FF_RAMP 0x57 + +#define FF_EFFECT_MIN FF_RUMBLE +#define FF_EFFECT_MAX FF_RAMP + +/* + * Force feedback periodic effect types + */ + +#define FF_SQUARE 0x58 +#define FF_TRIANGLE 0x59 +#define FF_SINE 0x5a +#define FF_SAW_UP 0x5b +#define FF_SAW_DOWN 0x5c +#define FF_CUSTOM 0x5d + +#define FF_WAVEFORM_MIN FF_SQUARE +#define FF_WAVEFORM_MAX FF_CUSTOM + +/* + * Set ff device properties + */ + +#define FF_GAIN 0x60 +#define FF_AUTOCENTER 0x61 + +#define FF_MAX 0x7f +#define FF_CNT (FF_MAX+1) + +#endif /* _INPUT_H */ diff --git a/qemu/include/standard-headers/linux/pci_regs.h b/qemu/include/standard-headers/linux/pci_regs.h new file mode 100644 index 000000000..57e8c80c3 --- /dev/null +++ b/qemu/include/standard-headers/linux/pci_regs.h @@ -0,0 +1,719 @@ +/* + * pci_regs.h + * + * PCI standard defines + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares <mj@ucw.cz> + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + * + * For hypertransport information, please consult the following manuals + * from http://www.hypertransport.org + * + * The Hypertransport I/O Link Specification + */ + +#ifndef LINUX_PCI_REGS_H +#define LINUX_PCI_REGS_H + +/* + * Under PCI, each device has 256 bytes of configuration address space, + * of which the first 64 bytes are standardized as follows: + */ +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ +#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ +#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ +#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ +#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ +#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ +#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ + +#define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ +#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ +#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ +#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ +#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ +#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ +#define PCI_STATUS_DEVSEL_FAST 0x000 +#define PCI_STATUS_DEVSEL_MEDIUM 0x200 +#define PCI_STATUS_DEVSEL_SLOW 0x400 +#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ +#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ +#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ +#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ +#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ + +#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ +#define PCI_REVISION_ID 0x08 /* Revision ID */ +#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ + +#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ +#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ +#define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_NORMAL 0 +#define PCI_HEADER_TYPE_BRIDGE 1 +#define PCI_HEADER_TYPE_CARDBUS 2 + +#define PCI_BIST 0x0f /* 8 bits */ +#define PCI_BIST_CODE_MASK 0x0f /* Return result */ +#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ +#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ + +/* + * Base addresses specify locations in memory or I/O space. + * Decoded size can be determined by writing a value of + * 0xffffffff to the register, and reading it back. Only + * 1 bits are decoded. + */ +#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ +#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ +#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ +#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ +#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ +#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ +#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ +#define PCI_BASE_ADDRESS_SPACE_IO 0x01 +#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 +#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 +#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ +#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ +#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ +#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +/* bit 1 is reserved if address_space = 1 */ + +/* Header type 0 (normal devices) */ +#define PCI_CARDBUS_CIS 0x28 +#define PCI_SUBSYSTEM_VENDOR_ID 0x2c +#define PCI_SUBSYSTEM_ID 0x2e +#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ +#define PCI_ROM_ADDRESS_ENABLE 0x01 +#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) + +#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ + +/* 0x35-0x3b are reserved */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* Header type 1 (PCI-to-PCI bridges) */ +#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ +#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ +#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ +#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ +#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ +#define PCI_IO_LIMIT 0x1d +#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ +#define PCI_IO_RANGE_TYPE_16 0x00 +#define PCI_IO_RANGE_TYPE_32 0x01 +#define PCI_IO_RANGE_MASK (~0x0fUL) +#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ +#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ +#define PCI_MEMORY_LIMIT 0x22 +#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL +#define PCI_MEMORY_RANGE_MASK (~0x0fUL) +#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ +#define PCI_PREF_MEMORY_LIMIT 0x26 +#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL +#define PCI_PREF_RANGE_TYPE_32 0x00 +#define PCI_PREF_RANGE_TYPE_64 0x01 +#define PCI_PREF_RANGE_MASK (~0x0fUL) +#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ +#define PCI_PREF_LIMIT_UPPER32 0x2c +#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ +#define PCI_IO_LIMIT_UPPER16 0x32 +/* 0x34 same as for htype 0 */ +/* 0x35-0x3b is reserved */ +#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_BRIDGE_CONTROL 0x3e +#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ +#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ +#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */ +#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ +#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ +#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ +#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ + +/* Header type 2 (CardBus bridges) */ +#define PCI_CB_CAPABILITY_LIST 0x14 +/* 0x15 reserved */ +#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ +#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ +#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ +#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ +#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ +#define PCI_CB_MEMORY_BASE_0 0x1c +#define PCI_CB_MEMORY_LIMIT_0 0x20 +#define PCI_CB_MEMORY_BASE_1 0x24 +#define PCI_CB_MEMORY_LIMIT_1 0x28 +#define PCI_CB_IO_BASE_0 0x2c +#define PCI_CB_IO_BASE_0_HI 0x2e +#define PCI_CB_IO_LIMIT_0 0x30 +#define PCI_CB_IO_LIMIT_0_HI 0x32 +#define PCI_CB_IO_BASE_1 0x34 +#define PCI_CB_IO_BASE_1_HI 0x36 +#define PCI_CB_IO_LIMIT_1 0x38 +#define PCI_CB_IO_LIMIT_1_HI 0x3a +#define PCI_CB_IO_RANGE_MASK (~0x03UL) +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_CB_BRIDGE_CONTROL 0x3e +#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ +#define PCI_CB_BRIDGE_CTL_SERR 0x02 +#define PCI_CB_BRIDGE_CTL_ISA 0x04 +#define PCI_CB_BRIDGE_CTL_VGA 0x08 +#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 +#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ +#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 +#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 +#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 +#define PCI_CB_SUBSYSTEM_ID 0x42 +#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ +/* 0x48-0x7f reserved */ + +/* Capability lists */ + +#define PCI_CAP_LIST_ID 0 /* Capability ID */ +#define PCI_CAP_ID_PM 0x01 /* Power Management */ +#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ +#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ +#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ +#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */ +#define PCI_CAP_ID_DBG 0x0A /* Debug port */ +#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ +#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* Serial ATA */ +#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ +#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ +#define PCI_CAP_SIZEOF 4 + +/* Power Management Registers */ + +#define PCI_PM_PMC 2 /* PM Capabilities Register */ +#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ +#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ +#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ +#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ +#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ +#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ +#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ +#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ +#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ +#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ +#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ +#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */ +#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ +#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ +#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ +#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ +#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ +#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ +#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ +#define PCI_PM_DATA_REGISTER 7 /* (??) */ +#define PCI_PM_SIZEOF 8 + +/* AGP registers */ + +#define PCI_AGP_VERSION 2 /* BCD version number */ +#define PCI_AGP_RFU 3 /* Rest of capability flags */ +#define PCI_AGP_STATUS 4 /* Status register */ +#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ +#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ +#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ +#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ +#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ +#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ +#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ +#define PCI_AGP_COMMAND 8 /* Control register */ +#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ +#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ +#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ +#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ +#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ +#define PCI_AGP_SIZEOF 12 + +/* Vital Product Data */ + +#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ +#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ +#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ +#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ + +/* Slot Identification */ + +#define PCI_SID_ESR 2 /* Expansion Slot Register */ +#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ +#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ +#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ + +/* Message Signalled Interrupts registers */ + +#define PCI_MSI_FLAGS 2 /* Various flags */ +#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ +#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ +#define PCI_MSI_RFU 3 /* Rest of capability flags */ +#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 16 /* Pending bits register for 32-bit devices */ +#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 20 /* Pending bits register for 32-bit devices */ + +/* MSI-X registers */ +#define PCI_MSIX_FLAGS 2 +#define PCI_MSIX_FLAGS_QSIZE 0x7FF +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) +#define PCI_MSIX_FLAGS_MASKALL (1 << 14) +#define PCI_MSIX_TABLE 4 +#define PCI_MSIX_PBA 8 +#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) + +/* MSI-X entry's format */ +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 + +/* CompactPCI Hotswap Register */ + +#define PCI_CHSWP_CSR 2 /* Control and Status Register */ +#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ +#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ +#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ +#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ +#define PCI_CHSWP_PI 0x30 /* Programming Interface */ +#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ +#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ + +/* PCI Advanced Feature registers */ + +#define PCI_AF_LENGTH 2 +#define PCI_AF_CAP 3 +#define PCI_AF_CAP_TP 0x01 +#define PCI_AF_CAP_FLR 0x02 +#define PCI_AF_CTRL 4 +#define PCI_AF_CTRL_FLR 0x01 +#define PCI_AF_STATUS 5 +#define PCI_AF_STATUS_TP 0x01 + +/* PCI-X registers */ + +#define PCI_X_CMD 2 /* Modes & Features */ +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */ +#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */ +#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ + /* Max # of outstanding split transactions */ +#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */ +#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */ +#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */ +#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */ +#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */ +#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */ +#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ +#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ +#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_STATUS 4 /* PCI-X capabilities */ +#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ +#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ +#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ +#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ +#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ +#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ +#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ +#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ +#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ +#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ +#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ +#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ +#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ + +/* PCI Bridge Subsystem ID registers */ + +#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ +#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */ + +/* PCI Express capability registers */ + +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ +#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ +#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ +#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ +#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ +#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ +#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ +#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ +#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ +#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ +#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ +#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ +#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ +#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ +#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ +#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ +#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ +#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ +#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ +#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ +#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ +#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ +#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ +#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ +#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ +#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ +#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ +#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */ +#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */ +#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */ +#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */ +#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */ +#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */ +#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ +#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ +#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ +#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ +#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ +#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */ +#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ +#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ +#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ +#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ +#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ +#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ +#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ +#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ +#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */ +#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */ +#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */ +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ +#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ +#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ +#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ +#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ +#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ +#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ +#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ +#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ +#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ +#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ + +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 1 +#define PCI_EXT_CAP_ID_VC 2 +#define PCI_EXT_CAP_ID_DSN 3 +#define PCI_EXT_CAP_ID_PWR 4 +#define PCI_EXT_CAP_ID_VNDR 11 +#define PCI_EXT_CAP_ID_ACS 13 +#define PCI_EXT_CAP_ID_ARI 14 +#define PCI_EXT_CAP_ID_ATS 15 +#define PCI_EXT_CAP_ID_SRIOV 16 +#define PCI_EXT_CAP_ID_LTR 24 + +/* Advanced Error Reporting */ +#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ +#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ +#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ +#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ +#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ +#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ +#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ +#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ +#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ +#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ + /* Same bits as above */ +#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ +#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ +#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ +#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +/* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 +/* Non-fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 +/* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 +#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +/* Multi ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 +/* ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 +/* Multi ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ +#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ + +/* Virtual Channel */ +#define PCI_VC_PORT_REG1 4 +#define PCI_VC_PORT_REG2 8 +#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_STATUS 26 + +/* Power Budgeting */ +#define PCI_PWR_DSR 4 /* Data Select Register */ +#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ +#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ +#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ +#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ +#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ +#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ +#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ + +/* + * Hypertransport sub capability types + * + * Unfortunately there are both 3 bit and 5 bit capability types defined + * in the HT spec, catering for that is a little messy. You probably don't + * want to use these directly, just use pci_find_ht_capability() and it + * will do the right thing for you. + */ +#define HT_3BIT_CAP_MASK 0xE0 +#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ +#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ + +#define HT_5BIT_CAP_MASK 0xF8 +#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ +#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ +#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ +#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ +#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ +#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ +#define HT_MSI_FLAGS 0x02 /* Offset to flags */ +#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ +#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ +#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ +#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ +#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ +#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ +#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ +#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ +#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ +#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ +#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ + +/* Alternative Routing-ID Interpretation */ +#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ +#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ +#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ +#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ +#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ +#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ +#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ +#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ + +/* Address Translation Service */ +#define PCI_ATS_CAP 0x04 /* ATS Capability Register */ +#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */ +#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */ +#define PCI_ATS_CTRL 0x06 /* ATS Control Register */ +#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ +#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ +#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ + +/* Single Root I/O Virtualization */ +#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ +#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ +#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ +#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ +#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ +#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */ +#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */ +#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ +#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ +#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */ +#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ +#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ +#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ +#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */ +#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */ +#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */ +#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */ +#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */ +#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */ +#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */ +#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */ +#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/ +#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */ +#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */ +#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */ +#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ +#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ +#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ + +#define PCI_LTR_MAX_SNOOP_LAT 0x4 +#define PCI_LTR_MAX_NOSNOOP_LAT 0x6 +#define PCI_LTR_VALUE_MASK 0x000003ff +#define PCI_LTR_SCALE_MASK 0x00001c00 +#define PCI_LTR_SCALE_SHIFT 10 + +/* Access Control Service */ +#define PCI_ACS_CAP 0x04 /* ACS Capability Register */ +#define PCI_ACS_SV 0x01 /* Source Validation */ +#define PCI_ACS_TB 0x02 /* Translation Blocking */ +#define PCI_ACS_RR 0x04 /* P2P Request Redirect */ +#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */ +#define PCI_ACS_UF 0x10 /* Upstream Forwarding */ +#define PCI_ACS_EC 0x20 /* P2P Egress Control */ +#define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_CTRL 0x06 /* ACS Control Register */ +#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ + +#endif /* LINUX_PCI_REGS_H */ diff --git a/qemu/include/standard-headers/linux/types.h b/qemu/include/standard-headers/linux/types.h new file mode 100644 index 000000000..0526c2b87 --- /dev/null +++ b/qemu/include/standard-headers/linux/types.h @@ -0,0 +1,2 @@ +#include <stdint.h> +#include "qemu/compiler.h" diff --git a/qemu/include/standard-headers/linux/virtio_9p.h b/qemu/include/standard-headers/linux/virtio_9p.h new file mode 100644 index 000000000..e68f71dbe --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_9p.h @@ -0,0 +1,44 @@ +#ifndef _LINUX_VIRTIO_9P_H +#define _LINUX_VIRTIO_9P_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" + +/* The feature bitmap for virtio 9P */ + +/* The mount point is specified in a config variable */ +#define VIRTIO_9P_MOUNT_TAG 0 + +struct virtio_9p_config { + /* length of the tag name */ + uint16_t tag_len; + /* non-NULL terminated tag name */ + uint8_t tag[0]; +} QEMU_PACKED; + +#endif /* _LINUX_VIRTIO_9P_H */ diff --git a/qemu/include/standard-headers/linux/virtio_balloon.h b/qemu/include/standard-headers/linux/virtio_balloon.h new file mode 100644 index 000000000..2e2a6dcf3 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_balloon.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_VIRTIO_BALLOON_H +#define _LINUX_VIRTIO_BALLOON_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" + +/* The feature bitmap for virtio balloon */ +#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ +#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */ +#define VIRTIO_BALLOON_F_DEFLATE_ON_OOM 2 /* Deflate balloon on OOM */ + +/* Size of a PFN in the balloon interface. */ +#define VIRTIO_BALLOON_PFN_SHIFT 12 + +struct virtio_balloon_config { + /* Number of pages host wants Guest to give up. */ + uint32_t num_pages; + /* Number of pages we've actually got in balloon. */ + uint32_t actual; +}; + +#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */ +#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */ +#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */ +#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */ +#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */ +#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */ +#define VIRTIO_BALLOON_S_NR 6 + +/* + * Memory statistics structure. + * Driver fills an array of these structures and passes to device. + * + * NOTE: fields are laid out in a way that would make compiler add padding + * between and after fields, so we have to use compiler-specific attributes to + * pack it, to disable this padding. This also often causes compiler to + * generate suboptimal code. + * + * We maintain this statistics structure format for backwards compatibility, + * but don't follow this example. + * + * If implementing a similar structure, do something like the below instead: + * struct virtio_balloon_stat { + * __virtio16 tag; + * uint8_t reserved[6]; + * __virtio64 val; + * }; + * + * In other words, add explicit reserved fields to align field and + * structure boundaries at field size, avoiding compiler padding + * without the packed attribute. + */ +struct virtio_balloon_stat { + __virtio16 tag; + __virtio64 val; +} QEMU_PACKED; + +#endif /* _LINUX_VIRTIO_BALLOON_H */ diff --git a/qemu/include/standard-headers/linux/virtio_blk.h b/qemu/include/standard-headers/linux/virtio_blk.h new file mode 100644 index 000000000..cd601f406 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_blk.h @@ -0,0 +1,147 @@ +#ifndef _LINUX_VIRTIO_BLK_H +#define _LINUX_VIRTIO_BLK_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" +#include "standard-headers/linux/virtio_types.h" + +/* Feature bits */ +#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ +#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ +#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ +#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ +#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ +#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ +#define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ + +/* Legacy feature bits */ +#ifndef VIRTIO_BLK_NO_LEGACY +#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ +#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ +#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ +#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ +/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */ +#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE +#endif /* !VIRTIO_BLK_NO_LEGACY */ + +#define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ + +struct virtio_blk_config { + /* The capacity (in 512-byte sectors). */ + uint64_t capacity; + /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ + uint32_t size_max; + /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ + uint32_t seg_max; + /* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */ + struct virtio_blk_geometry { + uint16_t cylinders; + uint8_t heads; + uint8_t sectors; + } geometry; + + /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ + uint32_t blk_size; + + /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */ + /* exponent for physical block per logical block. */ + uint8_t physical_block_exp; + /* alignment offset in logical blocks. */ + uint8_t alignment_offset; + /* minimum I/O size without performance penalty in logical blocks. */ + uint16_t min_io_size; + /* optimal sustained I/O size in logical blocks. */ + uint32_t opt_io_size; + + /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */ + uint8_t wce; + uint8_t unused; + + /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */ + uint16_t num_queues; +} QEMU_PACKED; + +/* + * Command types + * + * Usage is a bit tricky as some bits are used as flags and some are not. + * + * Rules: + * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or + * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own + * and may not be combined with any of the other flags. + */ + +/* These two define direction. */ +#define VIRTIO_BLK_T_IN 0 +#define VIRTIO_BLK_T_OUT 1 + +#ifndef VIRTIO_BLK_NO_LEGACY +/* This bit says it's a scsi command, not an actual read or write. */ +#define VIRTIO_BLK_T_SCSI_CMD 2 +#endif /* VIRTIO_BLK_NO_LEGACY */ + +/* Cache flush command */ +#define VIRTIO_BLK_T_FLUSH 4 + +/* Get device ID command */ +#define VIRTIO_BLK_T_GET_ID 8 + +#ifndef VIRTIO_BLK_NO_LEGACY +/* Barrier before this op. */ +#define VIRTIO_BLK_T_BARRIER 0x80000000 +#endif /* !VIRTIO_BLK_NO_LEGACY */ + +/* + * This comes first in the read scatter-gather list. + * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, + * this is the first element of the read scatter-gather list. + */ +struct virtio_blk_outhdr { + /* VIRTIO_BLK_T* */ + __virtio32 type; + /* io priority. */ + __virtio32 ioprio; + /* Sector (ie. 512 byte offset) */ + __virtio64 sector; +}; + +#ifndef VIRTIO_BLK_NO_LEGACY +struct virtio_scsi_inhdr { + __virtio32 errors; + __virtio32 data_len; + __virtio32 sense_len; + __virtio32 residual; +}; +#endif /* !VIRTIO_BLK_NO_LEGACY */ + +/* And this is the final byte of the write scatter-gather list. */ +#define VIRTIO_BLK_S_OK 0 +#define VIRTIO_BLK_S_IOERR 1 +#define VIRTIO_BLK_S_UNSUPP 2 +#endif /* _LINUX_VIRTIO_BLK_H */ diff --git a/qemu/include/standard-headers/linux/virtio_config.h b/qemu/include/standard-headers/linux/virtio_config.h new file mode 100644 index 000000000..bcc445b3d --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_config.h @@ -0,0 +1,64 @@ +#ifndef _LINUX_VIRTIO_CONFIG_H +#define _LINUX_VIRTIO_CONFIG_H +/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +/* Virtio devices use a standardized configuration space to define their + * features and pass configuration information, but each implementation can + * store and access that space differently. */ +#include "standard-headers/linux/types.h" + +/* Status byte for guest to report progress, and synchronize features. */ +/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ +#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 +/* We have found a driver for the device. */ +#define VIRTIO_CONFIG_S_DRIVER 2 +/* Driver has used its parts of the config, and is happy */ +#define VIRTIO_CONFIG_S_DRIVER_OK 4 +/* Driver has finished configuring features */ +#define VIRTIO_CONFIG_S_FEATURES_OK 8 +/* We've given up on this device. */ +#define VIRTIO_CONFIG_S_FAILED 0x80 + +/* Some virtio feature bits (currently bits 28 through 32) are reserved for the + * transport being used (eg. virtio_ring), the rest are per-device feature + * bits. */ +#define VIRTIO_TRANSPORT_F_START 28 +#define VIRTIO_TRANSPORT_F_END 33 + +#ifndef VIRTIO_CONFIG_NO_LEGACY +/* Do we get callbacks when the ring is completely used, even if we've + * suppressed them? */ +#define VIRTIO_F_NOTIFY_ON_EMPTY 24 + +/* Can the device handle any descriptor layout? */ +#define VIRTIO_F_ANY_LAYOUT 27 +#endif /* VIRTIO_CONFIG_NO_LEGACY */ + +/* v1.0 compliant. */ +#define VIRTIO_F_VERSION_1 32 + +#endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/qemu/include/standard-headers/linux/virtio_console.h b/qemu/include/standard-headers/linux/virtio_console.h new file mode 100644 index 000000000..0dedc9e6f --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_console.h @@ -0,0 +1,78 @@ +/* + * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so + * anyone can use the definitions to implement compatible drivers/servers: + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright (C) Red Hat, Inc., 2009, 2010, 2011 + * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011 + */ +#ifndef _LINUX_VIRTIO_CONSOLE_H +#define _LINUX_VIRTIO_CONSOLE_H +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" + +/* Feature bits */ +#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ +#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ +#define VIRTIO_CONSOLE_F_EMERG_WRITE 2 /* Does host support emergency write? */ + +#define VIRTIO_CONSOLE_BAD_ID (~(uint32_t)0) + +struct virtio_console_config { + /* colums of the screens */ + uint16_t cols; + /* rows of the screens */ + uint16_t rows; + /* max. number of ports this device can hold */ + uint32_t max_nr_ports; + /* emergency write register */ + uint32_t emerg_wr; +} QEMU_PACKED; + +/* + * A message that's passed between the Host and the Guest for a + * particular port. + */ +struct virtio_console_control { + __virtio32 id; /* Port number */ + __virtio16 event; /* The kind of control event (see below) */ + __virtio16 value; /* Extra information for the key */ +}; + +/* Some events for control messages */ +#define VIRTIO_CONSOLE_DEVICE_READY 0 +#define VIRTIO_CONSOLE_PORT_ADD 1 +#define VIRTIO_CONSOLE_PORT_REMOVE 2 +#define VIRTIO_CONSOLE_PORT_READY 3 +#define VIRTIO_CONSOLE_CONSOLE_PORT 4 +#define VIRTIO_CONSOLE_RESIZE 5 +#define VIRTIO_CONSOLE_PORT_OPEN 6 +#define VIRTIO_CONSOLE_PORT_NAME 7 + + +#endif /* _LINUX_VIRTIO_CONSOLE_H */ diff --git a/qemu/include/standard-headers/linux/virtio_gpu.h b/qemu/include/standard-headers/linux/virtio_gpu.h new file mode 100644 index 000000000..72ef815f5 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_gpu.h @@ -0,0 +1,206 @@ +/* + * Virtio GPU Device + * + * Copyright Red Hat, Inc. 2013-2014 + * + * Authors: + * Dave Airlie <airlied@redhat.com> + * Gerd Hoffmann <kraxel@redhat.com> + * + * This header is BSD licensed so anyone can use the definitions + * to implement compatible drivers/servers: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef VIRTIO_GPU_HW_H +#define VIRTIO_GPU_HW_H + +#include "standard-headers/linux/types.h" + +enum virtio_gpu_ctrl_type { + VIRTIO_GPU_UNDEFINED = 0, + + /* 2d commands */ + VIRTIO_GPU_CMD_GET_DISPLAY_INFO = 0x0100, + VIRTIO_GPU_CMD_RESOURCE_CREATE_2D, + VIRTIO_GPU_CMD_RESOURCE_UNREF, + VIRTIO_GPU_CMD_SET_SCANOUT, + VIRTIO_GPU_CMD_RESOURCE_FLUSH, + VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D, + VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING, + VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING, + + /* cursor commands */ + VIRTIO_GPU_CMD_UPDATE_CURSOR = 0x0300, + VIRTIO_GPU_CMD_MOVE_CURSOR, + + /* success responses */ + VIRTIO_GPU_RESP_OK_NODATA = 0x1100, + VIRTIO_GPU_RESP_OK_DISPLAY_INFO, + + /* error responses */ + VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200, + VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY, + VIRTIO_GPU_RESP_ERR_INVALID_SCANOUT_ID, + VIRTIO_GPU_RESP_ERR_INVALID_RESOURCE_ID, + VIRTIO_GPU_RESP_ERR_INVALID_CONTEXT_ID, + VIRTIO_GPU_RESP_ERR_INVALID_PARAMETER, +}; + +#define VIRTIO_GPU_FLAG_FENCE (1 << 0) + +struct virtio_gpu_ctrl_hdr { + uint32_t type; + uint32_t flags; + uint64_t fence_id; + uint32_t ctx_id; + uint32_t padding; +}; + +/* data passed in the cursor vq */ + +struct virtio_gpu_cursor_pos { + uint32_t scanout_id; + uint32_t x; + uint32_t y; + uint32_t padding; +}; + +/* VIRTIO_GPU_CMD_UPDATE_CURSOR, VIRTIO_GPU_CMD_MOVE_CURSOR */ +struct virtio_gpu_update_cursor { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_cursor_pos pos; /* update & move */ + uint32_t resource_id; /* update only */ + uint32_t hot_x; /* update only */ + uint32_t hot_y; /* update only */ + uint32_t padding; +}; + +/* data passed in the control vq, 2d related */ + +struct virtio_gpu_rect { + uint32_t x; + uint32_t y; + uint32_t width; + uint32_t height; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_UNREF */ +struct virtio_gpu_resource_unref { + struct virtio_gpu_ctrl_hdr hdr; + uint32_t resource_id; + uint32_t padding; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_CREATE_2D: create a 2d resource with a format */ +struct virtio_gpu_resource_create_2d { + struct virtio_gpu_ctrl_hdr hdr; + uint32_t resource_id; + uint32_t format; + uint32_t width; + uint32_t height; +}; + +/* VIRTIO_GPU_CMD_SET_SCANOUT */ +struct virtio_gpu_set_scanout { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_rect r; + uint32_t scanout_id; + uint32_t resource_id; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_FLUSH */ +struct virtio_gpu_resource_flush { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_rect r; + uint32_t resource_id; + uint32_t padding; +}; + +/* VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D: simple transfer to_host */ +struct virtio_gpu_transfer_to_host_2d { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_rect r; + uint64_t offset; + uint32_t resource_id; + uint32_t padding; +}; + +struct virtio_gpu_mem_entry { + uint64_t addr; + uint32_t length; + uint32_t padding; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING */ +struct virtio_gpu_resource_attach_backing { + struct virtio_gpu_ctrl_hdr hdr; + uint32_t resource_id; + uint32_t nr_entries; +}; + +/* VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING */ +struct virtio_gpu_resource_detach_backing { + struct virtio_gpu_ctrl_hdr hdr; + uint32_t resource_id; + uint32_t padding; +}; + +/* VIRTIO_GPU_RESP_OK_DISPLAY_INFO */ +#define VIRTIO_GPU_MAX_SCANOUTS 16 +struct virtio_gpu_resp_display_info { + struct virtio_gpu_ctrl_hdr hdr; + struct virtio_gpu_display_one { + struct virtio_gpu_rect r; + uint32_t enabled; + uint32_t flags; + } pmodes[VIRTIO_GPU_MAX_SCANOUTS]; +}; + +#define VIRTIO_GPU_EVENT_DISPLAY (1 << 0) + +struct virtio_gpu_config { + uint32_t events_read; + uint32_t events_clear; + uint32_t num_scanouts; + uint32_t reserved; +}; + +/* simple formats for fbcon/X use */ +enum virtio_gpu_formats { + VIRTIO_GPU_FORMAT_B8G8R8A8_UNORM = 1, + VIRTIO_GPU_FORMAT_B8G8R8X8_UNORM = 2, + VIRTIO_GPU_FORMAT_A8R8G8B8_UNORM = 3, + VIRTIO_GPU_FORMAT_X8R8G8B8_UNORM = 4, + + VIRTIO_GPU_FORMAT_R8G8B8A8_UNORM = 67, + VIRTIO_GPU_FORMAT_X8B8G8R8_UNORM = 68, + + VIRTIO_GPU_FORMAT_A8B8G8R8_UNORM = 121, + VIRTIO_GPU_FORMAT_R8G8B8X8_UNORM = 134, +}; + +#endif diff --git a/qemu/include/standard-headers/linux/virtio_ids.h b/qemu/include/standard-headers/linux/virtio_ids.h new file mode 100644 index 000000000..77925f587 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_ids.h @@ -0,0 +1,45 @@ +#ifndef _LINUX_VIRTIO_IDS_H +#define _LINUX_VIRTIO_IDS_H +/* + * Virtio IDs + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio rng */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ +#define VIRTIO_ID_CAIF 12 /* Virtio caif */ +#define VIRTIO_ID_GPU 16 /* virtio GPU */ +#define VIRTIO_ID_INPUT 18 /* virtio input */ + +#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/qemu/include/standard-headers/linux/virtio_input.h b/qemu/include/standard-headers/linux/virtio_input.h new file mode 100644 index 000000000..a98a7974c --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_input.h @@ -0,0 +1,76 @@ +#ifndef _LINUX_VIRTIO_INPUT_H +#define _LINUX_VIRTIO_INPUT_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ + +#include "standard-headers/linux/types.h" + +enum virtio_input_config_select { + VIRTIO_INPUT_CFG_UNSET = 0x00, + VIRTIO_INPUT_CFG_ID_NAME = 0x01, + VIRTIO_INPUT_CFG_ID_SERIAL = 0x02, + VIRTIO_INPUT_CFG_ID_DEVIDS = 0x03, + VIRTIO_INPUT_CFG_PROP_BITS = 0x10, + VIRTIO_INPUT_CFG_EV_BITS = 0x11, + VIRTIO_INPUT_CFG_ABS_INFO = 0x12, +}; + +struct virtio_input_absinfo { + uint32_t min; + uint32_t max; + uint32_t fuzz; + uint32_t flat; + uint32_t res; +}; + +struct virtio_input_devids { + uint16_t bustype; + uint16_t vendor; + uint16_t product; + uint16_t version; +}; + +struct virtio_input_config { + uint8_t select; + uint8_t subsel; + uint8_t size; + uint8_t reserved[5]; + union { + char string[128]; + uint8_t bitmap[128]; + struct virtio_input_absinfo abs; + struct virtio_input_devids ids; + } u; +}; + +struct virtio_input_event { + uint16_t type; + uint16_t code; + uint32_t value; +}; + +#endif /* _LINUX_VIRTIO_INPUT_H */ diff --git a/qemu/include/standard-headers/linux/virtio_net.h b/qemu/include/standard-headers/linux/virtio_net.h new file mode 100644 index 000000000..a78f33e77 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_net.h @@ -0,0 +1,245 @@ +#ifndef _LINUX_VIRTIO_NET_H +#define _LINUX_VIRTIO_NET_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" +#include "standard-headers/linux/virtio_types.h" +#include "standard-headers/linux/if_ether.h" + +/* The feature bitmap for virtio net */ +#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ +#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ +#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */ +#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ +#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ +#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ +#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ +#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ +#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ +#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ +#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ +#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ +#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ +#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ +#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the + * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ + +#ifndef VIRTIO_NET_NO_LEGACY +#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ +#endif /* VIRTIO_NET_NO_LEGACY */ + +#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ + +struct virtio_net_config { + /* The config defining mac address (if VIRTIO_NET_F_MAC) */ + uint8_t mac[ETH_ALEN]; + /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ + uint16_t status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + uint16_t max_virtqueue_pairs; +} QEMU_PACKED; + +/* + * This header comes first in the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. + * + * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf, + * only flattened. + */ +struct virtio_net_hdr_v1 { +#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */ +#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ + uint8_t flags; +#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ +#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ +#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ +#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ + uint8_t gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + __virtio16 csum_start; /* Position to start checksumming from */ + __virtio16 csum_offset; /* Offset after that to place checksum */ + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; + +#ifndef VIRTIO_NET_NO_LEGACY +/* This header comes first in the scatter-gather list. + * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. */ +struct virtio_net_hdr { + /* See VIRTIO_NET_HDR_F_* */ + uint8_t flags; + /* See VIRTIO_NET_HDR_GSO_* */ + uint8_t gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + __virtio16 csum_start; /* Position to start checksumming from */ + __virtio16 csum_offset; /* Offset after that to place checksum */ +}; + +/* This is the version of the header to use when the MRG_RXBUF + * feature has been negotiated. */ +struct virtio_net_hdr_mrg_rxbuf { + struct virtio_net_hdr hdr; + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; +#endif /* ...VIRTIO_NET_NO_LEGACY */ + +/* + * Control virtqueue data structures + * + * The control virtqueue expects a header in the first sg entry + * and an ack/status response in the last entry. Data for the + * command goes in between. + */ +struct virtio_net_ctrl_hdr { + uint8_t class; + uint8_t cmd; +} QEMU_PACKED; + +typedef uint8_t virtio_net_ctrl_ack; + +#define VIRTIO_NET_OK 0 +#define VIRTIO_NET_ERR 1 + +/* + * Control the RX mode, ie. promisucous, allmulti, etc... + * All commands require an "out" sg entry containing a 1 byte + * state value, zero = disable, non-zero = enable. Commands + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. + */ +#define VIRTIO_NET_CTRL_RX 0 + #define VIRTIO_NET_CTRL_RX_PROMISC 0 + #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 + #define VIRTIO_NET_CTRL_RX_ALLUNI 2 + #define VIRTIO_NET_CTRL_RX_NOMULTI 3 + #define VIRTIO_NET_CTRL_RX_NOUNI 4 + #define VIRTIO_NET_CTRL_RX_NOBCAST 5 + +/* + * Control the MAC + * + * The MAC filter table is managed by the hypervisor, the guest should + * assume the size is infinite. Filtering should be considered + * non-perfect, ie. based on hypervisor resources, the guest may + * received packets from sources not specified in the filter list. + * + * In addition to the class/cmd header, the TABLE_SET command requires + * two out scatterlists. Each contains a 4 byte count of entries followed + * by a concatenated byte stream of the ETH_ALEN MAC addresses. The + * first sg list contains unicast addresses, the second is for multicast. + * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature + * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. + */ +struct virtio_net_ctrl_mac { + __virtio32 entries; + uint8_t macs[][ETH_ALEN]; +} QEMU_PACKED; + +#define VIRTIO_NET_CTRL_MAC 1 + #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 + +/* + * Control VLAN filtering + * + * The VLAN filter table is controlled via a simple ADD/DEL interface. + * VLAN IDs not added may be filterd by the hypervisor. Del is the + * opposite of add. Both commands expect an out entry containing a 2 + * byte VLAN ID. VLAN filterting is available with the + * VIRTIO_NET_F_CTRL_VLAN feature bit. + */ +#define VIRTIO_NET_CTRL_VLAN 2 + #define VIRTIO_NET_CTRL_VLAN_ADD 0 + #define VIRTIO_NET_CTRL_VLAN_DEL 1 + +/* + * Control link announce acknowledgement + * + * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that + * driver has recevied the notification; device would clear the + * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives + * this command. + */ +#define VIRTIO_NET_CTRL_ANNOUNCE 3 + #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 + +/* + * Control Receive Flow Steering + * + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + __virtio16 virtqueue_pairs; +}; + +#define VIRTIO_NET_CTRL_MQ 4 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + +/* + * Control network offloads + * + * Reconfigures the network offloads that Guest can handle. + * + * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit. + * + * Command data format matches the feature bit mask exactly. + * + * See VIRTIO_NET_F_GUEST_* for the list of offloads + * that can be enabled/disabled. + */ +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5 +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 + +#endif /* _LINUX_VIRTIO_NET_H */ diff --git a/qemu/include/standard-headers/linux/virtio_pci.h b/qemu/include/standard-headers/linux/virtio_pci.h new file mode 100644 index 000000000..9262acd13 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_pci.h @@ -0,0 +1,199 @@ +/* + * Virtio PCI driver + * + * This module allows virtio devices to be used over a virtual PCI device. + * This can be used with QEMU based VMMs like KVM or Xen. + * + * Copyright IBM Corp. 2007 + * + * Authors: + * Anthony Liguori <aliguori@us.ibm.com> + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _LINUX_VIRTIO_PCI_H +#define _LINUX_VIRTIO_PCI_H + +#include "standard-headers/linux/types.h" + +#ifndef VIRTIO_PCI_NO_LEGACY + +/* A 32-bit r/o bitmask of the features supported by the host */ +#define VIRTIO_PCI_HOST_FEATURES 0 + +/* A 32-bit r/w bitmask of features activated by the guest */ +#define VIRTIO_PCI_GUEST_FEATURES 4 + +/* A 32-bit r/w PFN for the currently selected queue */ +#define VIRTIO_PCI_QUEUE_PFN 8 + +/* A 16-bit r/o queue size for the currently selected queue */ +#define VIRTIO_PCI_QUEUE_NUM 12 + +/* A 16-bit r/w queue selector */ +#define VIRTIO_PCI_QUEUE_SEL 14 + +/* A 16-bit r/w queue notifier */ +#define VIRTIO_PCI_QUEUE_NOTIFY 16 + +/* An 8-bit device status register. */ +#define VIRTIO_PCI_STATUS 18 + +/* An 8-bit r/o interrupt status register. Reading the value will return the + * current contents of the ISR and will also clear it. This is effectively + * a read-and-acknowledge. */ +#define VIRTIO_PCI_ISR 19 + +/* MSI-X registers: only enabled if MSI-X is enabled. */ +/* A 16-bit vector for configuration changes. */ +#define VIRTIO_MSI_CONFIG_VECTOR 20 +/* A 16-bit vector for selected queue notifications. */ +#define VIRTIO_MSI_QUEUE_VECTOR 22 + +/* The remaining space is defined by each driver as the per-driver + * configuration space */ +#define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20) +/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */ +#define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled) + +/* Virtio ABI version, this must match exactly */ +#define VIRTIO_PCI_ABI_VERSION 0 + +/* How many bits to shift physical queue address written to QUEUE_PFN. + * 12 is historical, and due to x86 page size. */ +#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12 + +/* The alignment to use between consumer and producer parts of vring. + * x86 pagesize again. */ +#define VIRTIO_PCI_VRING_ALIGN 4096 + +#endif /* VIRTIO_PCI_NO_LEGACY */ + +/* The bit of the ISR which indicates a device configuration change. */ +#define VIRTIO_PCI_ISR_CONFIG 0x2 +/* Vector value used to disable MSI for queue */ +#define VIRTIO_MSI_NO_VECTOR 0xffff + +#ifndef VIRTIO_PCI_NO_MODERN + +/* IDs for different capabilities. Must all exist. */ + +/* Common configuration */ +#define VIRTIO_PCI_CAP_COMMON_CFG 1 +/* Notifications */ +#define VIRTIO_PCI_CAP_NOTIFY_CFG 2 +/* ISR access */ +#define VIRTIO_PCI_CAP_ISR_CFG 3 +/* Device specific configuration */ +#define VIRTIO_PCI_CAP_DEVICE_CFG 4 +/* PCI configuration access */ +#define VIRTIO_PCI_CAP_PCI_CFG 5 + +/* This is the PCI capability header: */ +struct virtio_pci_cap { + uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */ + uint8_t cap_next; /* Generic PCI field: next ptr. */ + uint8_t cap_len; /* Generic PCI field: capability length */ + uint8_t cfg_type; /* Identifies the structure. */ + uint8_t bar; /* Where to find it. */ + uint8_t padding[3]; /* Pad to full dword. */ + uint32_t offset; /* Offset within bar. */ + uint32_t length; /* Length of the structure, in bytes. */ +}; + +struct virtio_pci_notify_cap { + struct virtio_pci_cap cap; + uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */ +}; + +/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */ +struct virtio_pci_common_cfg { + /* About the whole device. */ + uint32_t device_feature_select; /* read-write */ + uint32_t device_feature; /* read-only */ + uint32_t guest_feature_select; /* read-write */ + uint32_t guest_feature; /* read-write */ + uint16_t msix_config; /* read-write */ + uint16_t num_queues; /* read-only */ + uint8_t device_status; /* read-write */ + uint8_t config_generation; /* read-only */ + + /* About a specific virtqueue. */ + uint16_t queue_select; /* read-write */ + uint16_t queue_size; /* read-write, power of 2. */ + uint16_t queue_msix_vector; /* read-write */ + uint16_t queue_enable; /* read-write */ + uint16_t queue_notify_off; /* read-only */ + uint32_t queue_desc_lo; /* read-write */ + uint32_t queue_desc_hi; /* read-write */ + uint32_t queue_avail_lo; /* read-write */ + uint32_t queue_avail_hi; /* read-write */ + uint32_t queue_used_lo; /* read-write */ + uint32_t queue_used_hi; /* read-write */ +}; + +/* Fields in VIRTIO_PCI_CAP_PCI_CFG: */ +struct virtio_pci_cfg_cap { + struct virtio_pci_cap cap; + uint8_t pci_cfg_data[4]; /* Data for BAR access. */ +}; + +/* Macro versions of offsets for the Old Timers! */ +#define VIRTIO_PCI_CAP_VNDR 0 +#define VIRTIO_PCI_CAP_NEXT 1 +#define VIRTIO_PCI_CAP_LEN 2 +#define VIRTIO_PCI_CAP_CFG_TYPE 3 +#define VIRTIO_PCI_CAP_BAR 4 +#define VIRTIO_PCI_CAP_OFFSET 8 +#define VIRTIO_PCI_CAP_LENGTH 12 + +#define VIRTIO_PCI_NOTIFY_CAP_MULT 16 + +#define VIRTIO_PCI_COMMON_DFSELECT 0 +#define VIRTIO_PCI_COMMON_DF 4 +#define VIRTIO_PCI_COMMON_GFSELECT 8 +#define VIRTIO_PCI_COMMON_GF 12 +#define VIRTIO_PCI_COMMON_MSIX 16 +#define VIRTIO_PCI_COMMON_NUMQ 18 +#define VIRTIO_PCI_COMMON_STATUS 20 +#define VIRTIO_PCI_COMMON_CFGGENERATION 21 +#define VIRTIO_PCI_COMMON_Q_SELECT 22 +#define VIRTIO_PCI_COMMON_Q_SIZE 24 +#define VIRTIO_PCI_COMMON_Q_MSIX 26 +#define VIRTIO_PCI_COMMON_Q_ENABLE 28 +#define VIRTIO_PCI_COMMON_Q_NOFF 30 +#define VIRTIO_PCI_COMMON_Q_DESCLO 32 +#define VIRTIO_PCI_COMMON_Q_DESCHI 36 +#define VIRTIO_PCI_COMMON_Q_AVAILLO 40 +#define VIRTIO_PCI_COMMON_Q_AVAILHI 44 +#define VIRTIO_PCI_COMMON_Q_USEDLO 48 +#define VIRTIO_PCI_COMMON_Q_USEDHI 52 + +#endif /* VIRTIO_PCI_NO_MODERN */ + +#endif diff --git a/qemu/include/standard-headers/linux/virtio_ring.h b/qemu/include/standard-headers/linux/virtio_ring.h new file mode 100644 index 000000000..6fe276faf --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_ring.h @@ -0,0 +1,171 @@ +#ifndef _LINUX_VIRTIO_RING_H +#define _LINUX_VIRTIO_RING_H +/* An interface for efficient virtio implementation, currently for use by KVM + * and lguest, but hopefully others soon. Do NOT change this since it will + * break existing servers and clients. + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright Rusty Russell IBM Corporation 2007. */ +#include "standard-headers/linux/types.h" +#include "standard-headers/linux/virtio_types.h" + +/* This marks a buffer as continuing via the next field. */ +#define VRING_DESC_F_NEXT 1 +/* This marks a buffer as write-only (otherwise read-only). */ +#define VRING_DESC_F_WRITE 2 +/* This means the buffer contains a list of buffer descriptors. */ +#define VRING_DESC_F_INDIRECT 4 + +/* The Host uses this in used->flags to advise the Guest: don't kick me when + * you add a buffer. It's unreliable, so it's simply an optimization. Guest + * will still kick if it's out of buffers. */ +#define VRING_USED_F_NO_NOTIFY 1 +/* The Guest uses this in avail->flags to advise the Host: don't interrupt me + * when you consume a buffer. It's unreliable, so it's simply an + * optimization. */ +#define VRING_AVAIL_F_NO_INTERRUPT 1 + +/* We support indirect buffer descriptors */ +#define VIRTIO_RING_F_INDIRECT_DESC 28 + +/* The Guest publishes the used index for which it expects an interrupt + * at the end of the avail ring. Host should ignore the avail->flags field. */ +/* The Host publishes the avail index for which it expects a kick + * at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_EVENT_IDX 29 + +/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ +struct vring_desc { + /* Address (guest-physical). */ + __virtio64 addr; + /* Length. */ + __virtio32 len; + /* The flags as indicated above. */ + __virtio16 flags; + /* We chain unused descriptors via this, too */ + __virtio16 next; +}; + +struct vring_avail { + __virtio16 flags; + __virtio16 idx; + __virtio16 ring[]; +}; + +/* u32 is used here for ids for padding reasons. */ +struct vring_used_elem { + /* Index of start of used descriptor chain. */ + __virtio32 id; + /* Total length of the descriptor chain which was used (written to) */ + __virtio32 len; +}; + +struct vring_used { + __virtio16 flags; + __virtio16 idx; + struct vring_used_elem ring[]; +}; + +struct vring { + unsigned int num; + + struct vring_desc *desc; + + struct vring_avail *avail; + + struct vring_used *used; +}; + +/* Alignment requirements for vring elements. + * When using pre-virtio 1.0 layout, these fall out naturally. + */ +#define VRING_AVAIL_ALIGN_SIZE 2 +#define VRING_USED_ALIGN_SIZE 4 +#define VRING_DESC_ALIGN_SIZE 16 + +/* The standard layout for the ring is a continuous chunk of memory which looks + * like this. We assume num is a power of 2. + * + * struct vring + * { + * // The actual descriptors (16 bytes each) + * struct vring_desc desc[num]; + * + * // A ring of available descriptor heads with free-running index. + * __virtio16 avail_flags; + * __virtio16 avail_idx; + * __virtio16 available[num]; + * __virtio16 used_event_idx; + * + * // Padding to the next align boundary. + * char pad[]; + * + * // A ring of used descriptor heads with free-running index. + * __virtio16 used_flags; + * __virtio16 used_idx; + * struct vring_used_elem used[num]; + * __virtio16 avail_event_idx; + * }; + */ +/* We publish the used event index at the end of the available ring, and vice + * versa. They are at the end for backwards compatibility. */ +#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num]) +#define vring_avail_event(vr) (*(__virtio16 *)&(vr)->used->ring[(vr)->num]) + +static inline void vring_init(struct vring *vr, unsigned int num, void *p, + unsigned long align) +{ + vr->num = num; + vr->desc = p; + vr->avail = p + num*sizeof(struct vring_desc); + vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__virtio16) + + align-1) & ~(align - 1)); +} + +static inline unsigned vring_size(unsigned int num, unsigned long align) +{ + return ((sizeof(struct vring_desc) * num + sizeof(__virtio16) * (3 + num) + + align - 1) & ~(align - 1)) + + sizeof(__virtio16) * 3 + sizeof(struct vring_used_elem) * num; +} + +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other side, if + * we have just incremented index from old to new_idx, + * should we trigger an event? */ +static inline int vring_need_event(uint16_t event_idx, uint16_t new_idx, uint16_t old) +{ + /* Note: Xen has similar logic for notification hold-off + * in include/xen/interface/io/ring.h with req_event and req_prod + * corresponding to event_idx + 1 and new_idx respectively. + * Note also that req_event and req_prod in Xen start at 1, + * event indexes in virtio start at 0. */ + return (uint16_t)(new_idx - event_idx - 1) < (uint16_t)(new_idx - old); +} + +#endif /* _LINUX_VIRTIO_RING_H */ diff --git a/qemu/include/standard-headers/linux/virtio_rng.h b/qemu/include/standard-headers/linux/virtio_rng.h new file mode 100644 index 000000000..60fc798bd --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_rng.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_VIRTIO_RNG_H +#define _LINUX_VIRTIO_RNG_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. */ +#include "standard-headers/linux/virtio_ids.h" +#include "standard-headers/linux/virtio_config.h" + +#endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/qemu/include/standard-headers/linux/virtio_scsi.h b/qemu/include/standard-headers/linux/virtio_scsi.h new file mode 100644 index 000000000..ab66166b6 --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_scsi.h @@ -0,0 +1,172 @@ +/* + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef _LINUX_VIRTIO_SCSI_H +#define _LINUX_VIRTIO_SCSI_H + +#include "standard-headers/linux/virtio_types.h" + +/* Default values of the CDB and sense data size configuration fields */ +#define VIRTIO_SCSI_CDB_DEFAULT_SIZE 32 +#define VIRTIO_SCSI_SENSE_DEFAULT_SIZE 96 + +#ifndef VIRTIO_SCSI_CDB_SIZE +#define VIRTIO_SCSI_CDB_SIZE VIRTIO_SCSI_CDB_DEFAULT_SIZE +#endif +#ifndef VIRTIO_SCSI_SENSE_SIZE +#define VIRTIO_SCSI_SENSE_SIZE VIRTIO_SCSI_SENSE_DEFAULT_SIZE +#endif + +/* SCSI command request, followed by data-out */ +struct virtio_scsi_cmd_req { + uint8_t lun[8]; /* Logical Unit Number */ + __virtio64 tag; /* Command identifier */ + uint8_t task_attr; /* Task attribute */ + uint8_t prio; /* SAM command priority field */ + uint8_t crn; + uint8_t cdb[VIRTIO_SCSI_CDB_SIZE]; +} QEMU_PACKED; + +/* SCSI command request, followed by protection information */ +struct virtio_scsi_cmd_req_pi { + uint8_t lun[8]; /* Logical Unit Number */ + __virtio64 tag; /* Command identifier */ + uint8_t task_attr; /* Task attribute */ + uint8_t prio; /* SAM command priority field */ + uint8_t crn; + __virtio32 pi_bytesout; /* DataOUT PI Number of bytes */ + __virtio32 pi_bytesin; /* DataIN PI Number of bytes */ + uint8_t cdb[VIRTIO_SCSI_CDB_SIZE]; +} QEMU_PACKED; + +/* Response, followed by sense data and data-in */ +struct virtio_scsi_cmd_resp { + __virtio32 sense_len; /* Sense data length */ + __virtio32 resid; /* Residual bytes in data buffer */ + __virtio16 status_qualifier; /* Status qualifier */ + uint8_t status; /* Command completion status */ + uint8_t response; /* Response values */ + uint8_t sense[VIRTIO_SCSI_SENSE_SIZE]; +} QEMU_PACKED; + +/* Task Management Request */ +struct virtio_scsi_ctrl_tmf_req { + __virtio32 type; + __virtio32 subtype; + uint8_t lun[8]; + __virtio64 tag; +} QEMU_PACKED; + +struct virtio_scsi_ctrl_tmf_resp { + uint8_t response; +} QEMU_PACKED; + +/* Asynchronous notification query/subscription */ +struct virtio_scsi_ctrl_an_req { + __virtio32 type; + uint8_t lun[8]; + __virtio32 event_requested; +} QEMU_PACKED; + +struct virtio_scsi_ctrl_an_resp { + __virtio32 event_actual; + uint8_t response; +} QEMU_PACKED; + +struct virtio_scsi_event { + __virtio32 event; + uint8_t lun[8]; + __virtio32 reason; +} QEMU_PACKED; + +struct virtio_scsi_config { + uint32_t num_queues; + uint32_t seg_max; + uint32_t max_sectors; + uint32_t cmd_per_lun; + uint32_t event_info_size; + uint32_t sense_size; + uint32_t cdb_size; + uint16_t max_channel; + uint16_t max_target; + uint32_t max_lun; +} QEMU_PACKED; + +/* Feature Bits */ +#define VIRTIO_SCSI_F_INOUT 0 +#define VIRTIO_SCSI_F_HOTPLUG 1 +#define VIRTIO_SCSI_F_CHANGE 2 +#define VIRTIO_SCSI_F_T10_PI 3 + +/* Response codes */ +#define VIRTIO_SCSI_S_OK 0 +#define VIRTIO_SCSI_S_OVERRUN 1 +#define VIRTIO_SCSI_S_ABORTED 2 +#define VIRTIO_SCSI_S_BAD_TARGET 3 +#define VIRTIO_SCSI_S_RESET 4 +#define VIRTIO_SCSI_S_BUSY 5 +#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6 +#define VIRTIO_SCSI_S_TARGET_FAILURE 7 +#define VIRTIO_SCSI_S_NEXUS_FAILURE 8 +#define VIRTIO_SCSI_S_FAILURE 9 +#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10 +#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11 +#define VIRTIO_SCSI_S_INCORRECT_LUN 12 + +/* Controlq type codes. */ +#define VIRTIO_SCSI_T_TMF 0 +#define VIRTIO_SCSI_T_AN_QUERY 1 +#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2 + +/* Valid TMF subtypes. */ +#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0 +#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1 +#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2 +#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3 +#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4 +#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7 + +/* Events. */ +#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000 +#define VIRTIO_SCSI_T_NO_EVENT 0 +#define VIRTIO_SCSI_T_TRANSPORT_RESET 1 +#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 +#define VIRTIO_SCSI_T_PARAM_CHANGE 3 + +/* Reasons of transport reset event */ +#define VIRTIO_SCSI_EVT_RESET_HARD 0 +#define VIRTIO_SCSI_EVT_RESET_RESCAN 1 +#define VIRTIO_SCSI_EVT_RESET_REMOVED 2 + +#define VIRTIO_SCSI_S_SIMPLE 0 +#define VIRTIO_SCSI_S_ORDERED 1 +#define VIRTIO_SCSI_S_HEAD 2 +#define VIRTIO_SCSI_S_ACA 3 + + +#endif /* _LINUX_VIRTIO_SCSI_H */ diff --git a/qemu/include/standard-headers/linux/virtio_types.h b/qemu/include/standard-headers/linux/virtio_types.h new file mode 100644 index 000000000..fd0d3511f --- /dev/null +++ b/qemu/include/standard-headers/linux/virtio_types.h @@ -0,0 +1,46 @@ +#ifndef _LINUX_VIRTIO_TYPES_H +#define _LINUX_VIRTIO_TYPES_H +/* Type definitions for virtio implementations. + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Copyright (C) 2014 Red Hat, Inc. + * Author: Michael S. Tsirkin <mst@redhat.com> + */ +#include "standard-headers/linux/types.h" + +/* + * __virtio{16,32,64} have the following meaning: + * - __u{16,32,64} for virtio devices in legacy mode, accessed in native endian + * - __le{16,32,64} for standard-compliant virtio devices + */ + +typedef uint16_t __virtio16; +typedef uint32_t __virtio32; +typedef uint64_t __virtio64; + +#endif /* _LINUX_VIRTIO_TYPES_H */ |