summaryrefslogtreecommitdiffstats
path: root/qemu/include/standard-headers/linux
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/include/standard-headers/linux')
-rw-r--r--qemu/include/standard-headers/linux/if_ether.h1
-rw-r--r--qemu/include/standard-headers/linux/input.h1203
-rw-r--r--qemu/include/standard-headers/linux/pci_regs.h719
-rw-r--r--qemu/include/standard-headers/linux/types.h2
-rw-r--r--qemu/include/standard-headers/linux/virtio_9p.h44
-rw-r--r--qemu/include/standard-headers/linux/virtio_balloon.h84
-rw-r--r--qemu/include/standard-headers/linux/virtio_blk.h147
-rw-r--r--qemu/include/standard-headers/linux/virtio_config.h64
-rw-r--r--qemu/include/standard-headers/linux/virtio_console.h78
-rw-r--r--qemu/include/standard-headers/linux/virtio_gpu.h206
-rw-r--r--qemu/include/standard-headers/linux/virtio_ids.h45
-rw-r--r--qemu/include/standard-headers/linux/virtio_input.h76
-rw-r--r--qemu/include/standard-headers/linux/virtio_net.h245
-rw-r--r--qemu/include/standard-headers/linux/virtio_pci.h199
-rw-r--r--qemu/include/standard-headers/linux/virtio_ring.h171
-rw-r--r--qemu/include/standard-headers/linux/virtio_rng.h8
-rw-r--r--qemu/include/standard-headers/linux/virtio_scsi.h172
-rw-r--r--qemu/include/standard-headers/linux/virtio_types.h46
18 files changed, 3510 insertions, 0 deletions
diff --git a/qemu/include/standard-headers/linux/if_ether.h b/qemu/include/standard-headers/linux/if_ether.h
new file mode 100644
index 000000000..91cf735fb
--- /dev/null
+++ b/qemu/include/standard-headers/linux/if_ether.h
@@ -0,0 +1 @@
+#define ETH_ALEN 6
diff --git a/qemu/include/standard-headers/linux/input.h b/qemu/include/standard-headers/linux/input.h
new file mode 100644
index 000000000..b003c6705
--- /dev/null
+++ b/qemu/include/standard-headers/linux/input.h
@@ -0,0 +1,1203 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _INPUT_H
+#define _INPUT_H
+
+
+#include <sys/time.h>
+#include <sys/types.h>
+#include "standard-headers/linux/types.h"
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+ struct timeval time;
+ uint16_t type;
+ uint16_t code;
+ int32_t value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION 0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+ uint16_t bustype;
+ uint16_t vendor;
+ uint16_t product;
+ uint16_t version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+ int32_t value;
+ int32_t minimum;
+ int32_t maximum;
+ int32_t fuzz;
+ int32_t flat;
+ int32_t resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ * should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX (1 << 0)
+ uint8_t flags;
+ uint8_t len;
+ uint16_t index;
+ uint32_t keycode;
+ uint8_t scancode[32];
+};
+
+#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
+#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
+#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
+#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
+
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
+#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
+#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
+#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ * uint32_t code;
+ * int32_t values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(int32_t). If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
+#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
+#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
+#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
+
+#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
+#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
+#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
+
+#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
+#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
+#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
+
+#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
+#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */
+
+#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
+#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
+#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
+#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
+#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
+#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
+
+#define INPUT_PROP_MAX 0x1f
+#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN 0x00
+#define EV_KEY 0x01
+#define EV_REL 0x02
+#define EV_ABS 0x03
+#define EV_MSC 0x04
+#define EV_SW 0x05
+#define EV_LED 0x11
+#define EV_SND 0x12
+#define EV_REP 0x14
+#define EV_FF 0x15
+#define EV_PWR 0x16
+#define EV_FF_STATUS 0x17
+#define EV_MAX 0x1f
+#define EV_CNT (EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT 0
+#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
+#define SYN_DROPPED 3
+#define SYN_MAX 0xf
+#define SYN_CNT (SYN_MAX+1)
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED 0
+#define KEY_ESC 1
+#define KEY_1 2
+#define KEY_2 3
+#define KEY_3 4
+#define KEY_4 5
+#define KEY_5 6
+#define KEY_6 7
+#define KEY_7 8
+#define KEY_8 9
+#define KEY_9 10
+#define KEY_0 11
+#define KEY_MINUS 12
+#define KEY_EQUAL 13
+#define KEY_BACKSPACE 14
+#define KEY_TAB 15
+#define KEY_Q 16
+#define KEY_W 17
+#define KEY_E 18
+#define KEY_R 19
+#define KEY_T 20
+#define KEY_Y 21
+#define KEY_U 22
+#define KEY_I 23
+#define KEY_O 24
+#define KEY_P 25
+#define KEY_LEFTBRACE 26
+#define KEY_RIGHTBRACE 27
+#define KEY_ENTER 28
+#define KEY_LEFTCTRL 29
+#define KEY_A 30
+#define KEY_S 31
+#define KEY_D 32
+#define KEY_F 33
+#define KEY_G 34
+#define KEY_H 35
+#define KEY_J 36
+#define KEY_K 37
+#define KEY_L 38
+#define KEY_SEMICOLON 39
+#define KEY_APOSTROPHE 40
+#define KEY_GRAVE 41
+#define KEY_LEFTSHIFT 42
+#define KEY_BACKSLASH 43
+#define KEY_Z 44
+#define KEY_X 45
+#define KEY_C 46
+#define KEY_V 47
+#define KEY_B 48
+#define KEY_N 49
+#define KEY_M 50
+#define KEY_COMMA 51
+#define KEY_DOT 52
+#define KEY_SLASH 53
+#define KEY_RIGHTSHIFT 54
+#define KEY_KPASTERISK 55
+#define KEY_LEFTALT 56
+#define KEY_SPACE 57
+#define KEY_CAPSLOCK 58
+#define KEY_F1 59
+#define KEY_F2 60
+#define KEY_F3 61
+#define KEY_F4 62
+#define KEY_F5 63
+#define KEY_F6 64
+#define KEY_F7 65
+#define KEY_F8 66
+#define KEY_F9 67
+#define KEY_F10 68
+#define KEY_NUMLOCK 69
+#define KEY_SCROLLLOCK 70
+#define KEY_KP7 71
+#define KEY_KP8 72
+#define KEY_KP9 73
+#define KEY_KPMINUS 74
+#define KEY_KP4 75
+#define KEY_KP5 76
+#define KEY_KP6 77
+#define KEY_KPPLUS 78
+#define KEY_KP1 79
+#define KEY_KP2 80
+#define KEY_KP3 81
+#define KEY_KP0 82
+#define KEY_KPDOT 83
+
+#define KEY_ZENKAKUHANKAKU 85
+#define KEY_102ND 86
+#define KEY_F11 87
+#define KEY_F12 88
+#define KEY_RO 89
+#define KEY_KATAKANA 90
+#define KEY_HIRAGANA 91
+#define KEY_HENKAN 92
+#define KEY_KATAKANAHIRAGANA 93
+#define KEY_MUHENKAN 94
+#define KEY_KPJPCOMMA 95
+#define KEY_KPENTER 96
+#define KEY_RIGHTCTRL 97
+#define KEY_KPSLASH 98
+#define KEY_SYSRQ 99
+#define KEY_RIGHTALT 100
+#define KEY_LINEFEED 101
+#define KEY_HOME 102
+#define KEY_UP 103
+#define KEY_PAGEUP 104
+#define KEY_LEFT 105
+#define KEY_RIGHT 106
+#define KEY_END 107
+#define KEY_DOWN 108
+#define KEY_PAGEDOWN 109
+#define KEY_INSERT 110
+#define KEY_DELETE 111
+#define KEY_MACRO 112
+#define KEY_MUTE 113
+#define KEY_VOLUMEDOWN 114
+#define KEY_VOLUMEUP 115
+#define KEY_POWER 116 /* SC System Power Down */
+#define KEY_KPEQUAL 117
+#define KEY_KPPLUSMINUS 118
+#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA 121
+#define KEY_HANGEUL 122
+#define KEY_HANGUEL KEY_HANGEUL
+#define KEY_HANJA 123
+#define KEY_YEN 124
+#define KEY_LEFTMETA 125
+#define KEY_RIGHTMETA 126
+#define KEY_COMPOSE 127
+
+#define KEY_STOP 128 /* AC Stop */
+#define KEY_AGAIN 129
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
+#define KEY_FRONT 132
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
+#define KEY_SETUP 141
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
+#define KEY_SENDFILE 145
+#define KEY_DELETEFILE 146
+#define KEY_XFER 147
+#define KEY_PROG1 148
+#define KEY_PROG2 149
+#define KEY_WWW 150 /* AL Internet Browser */
+#define KEY_MSDOS 151
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
+#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
+#define KEY_DIRECTION KEY_ROTATE_DISPLAY
+#define KEY_CYCLEWINDOWS 154
+#define KEY_MAIL 155
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+#define KEY_COMPUTER 157
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
+#define KEY_CLOSECD 160
+#define KEY_EJECTCD 161
+#define KEY_EJECTCLOSECD 162
+#define KEY_NEXTSONG 163
+#define KEY_PLAYPAUSE 164
+#define KEY_PREVIOUSSONG 165
+#define KEY_STOPCD 166
+#define KEY_RECORD 167
+#define KEY_REWIND 168
+#define KEY_PHONE 169 /* Media Select Telephone */
+#define KEY_ISO 170
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
+#define KEY_MOVE 175
+#define KEY_EDIT 176
+#define KEY_SCROLLUP 177
+#define KEY_SCROLLDOWN 178
+#define KEY_KPLEFTPAREN 179
+#define KEY_KPRIGHTPAREN 180
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
+
+#define KEY_F13 183
+#define KEY_F14 184
+#define KEY_F15 185
+#define KEY_F16 186
+#define KEY_F17 187
+#define KEY_F18 188
+#define KEY_F19 189
+#define KEY_F20 190
+#define KEY_F21 191
+#define KEY_F22 192
+#define KEY_F23 193
+#define KEY_F24 194
+
+#define KEY_PLAYCD 200
+#define KEY_PAUSECD 201
+#define KEY_PROG3 202
+#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_SUSPEND 205
+#define KEY_CLOSE 206 /* AC Close */
+#define KEY_PLAY 207
+#define KEY_FASTFORWARD 208
+#define KEY_BASSBOOST 209
+#define KEY_PRINT 210 /* AC Print */
+#define KEY_HP 211
+#define KEY_CAMERA 212
+#define KEY_SOUND 213
+#define KEY_QUESTION 214
+#define KEY_EMAIL 215
+#define KEY_CHAT 216
+#define KEY_SEARCH 217
+#define KEY_CONNECT 218
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+#define KEY_SPORT 220
+#define KEY_SHOP 221
+#define KEY_ALTERASE 222
+#define KEY_CANCEL 223 /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN 224
+#define KEY_BRIGHTNESSUP 225
+#define KEY_MEDIA 226
+
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE 228
+#define KEY_KBDILLUMDOWN 229
+#define KEY_KBDILLUMUP 230
+
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
+#define KEY_DOCUMENTS 235
+
+#define KEY_BATTERY 236
+
+#define KEY_BLUETOOTH 237
+#define KEY_WLAN 238
+#define KEY_UWB 239
+
+#define KEY_UNKNOWN 240
+
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
+ brightness control is off,
+ rely on ambient */
+#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
+#define KEY_WIMAX KEY_WWAN
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC 0x100
+#define BTN_0 0x100
+#define BTN_1 0x101
+#define BTN_2 0x102
+#define BTN_3 0x103
+#define BTN_4 0x104
+#define BTN_5 0x105
+#define BTN_6 0x106
+#define BTN_7 0x107
+#define BTN_8 0x108
+#define BTN_9 0x109
+
+#define BTN_MOUSE 0x110
+#define BTN_LEFT 0x110
+#define BTN_RIGHT 0x111
+#define BTN_MIDDLE 0x112
+#define BTN_SIDE 0x113
+#define BTN_EXTRA 0x114
+#define BTN_FORWARD 0x115
+#define BTN_BACK 0x116
+#define BTN_TASK 0x117
+
+#define BTN_JOYSTICK 0x120
+#define BTN_TRIGGER 0x120
+#define BTN_THUMB 0x121
+#define BTN_THUMB2 0x122
+#define BTN_TOP 0x123
+#define BTN_TOP2 0x124
+#define BTN_PINKIE 0x125
+#define BTN_BASE 0x126
+#define BTN_BASE2 0x127
+#define BTN_BASE3 0x128
+#define BTN_BASE4 0x129
+#define BTN_BASE5 0x12a
+#define BTN_BASE6 0x12b
+#define BTN_DEAD 0x12f
+
+#define BTN_GAMEPAD 0x130
+#define BTN_SOUTH 0x130
+#define BTN_A BTN_SOUTH
+#define BTN_EAST 0x131
+#define BTN_B BTN_EAST
+#define BTN_C 0x132
+#define BTN_NORTH 0x133
+#define BTN_X BTN_NORTH
+#define BTN_WEST 0x134
+#define BTN_Y BTN_WEST
+#define BTN_Z 0x135
+#define BTN_TL 0x136
+#define BTN_TR 0x137
+#define BTN_TL2 0x138
+#define BTN_TR2 0x139
+#define BTN_SELECT 0x13a
+#define BTN_START 0x13b
+#define BTN_MODE 0x13c
+#define BTN_THUMBL 0x13d
+#define BTN_THUMBR 0x13e
+
+#define BTN_DIGI 0x140
+#define BTN_TOOL_PEN 0x140
+#define BTN_TOOL_RUBBER 0x141
+#define BTN_TOOL_BRUSH 0x142
+#define BTN_TOOL_PENCIL 0x143
+#define BTN_TOOL_AIRBRUSH 0x144
+#define BTN_TOOL_FINGER 0x145
+#define BTN_TOOL_MOUSE 0x146
+#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+#define BTN_TOUCH 0x14a
+#define BTN_STYLUS 0x14b
+#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+
+#define BTN_WHEEL 0x150
+#define BTN_GEAR_DOWN 0x150
+#define BTN_GEAR_UP 0x151
+
+#define KEY_OK 0x160
+#define KEY_SELECT 0x161
+#define KEY_GOTO 0x162
+#define KEY_CLEAR 0x163
+#define KEY_POWER2 0x164
+#define KEY_OPTION 0x165
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME 0x167
+#define KEY_VENDOR 0x168
+#define KEY_ARCHIVE 0x169
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+#define KEY_CHANNEL 0x16b
+#define KEY_FAVORITES 0x16c
+#define KEY_EPG 0x16d
+#define KEY_PVR 0x16e /* Media Select Home */
+#define KEY_MHP 0x16f
+#define KEY_LANGUAGE 0x170
+#define KEY_TITLE 0x171
+#define KEY_SUBTITLE 0x172
+#define KEY_ANGLE 0x173
+#define KEY_ZOOM 0x174
+#define KEY_MODE 0x175
+#define KEY_KEYBOARD 0x176
+#define KEY_SCREEN 0x177
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
+#define KEY_SAT2 0x17e
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
+#define KEY_RADIO 0x181
+#define KEY_TUNER 0x182 /* Media Select Tuner */
+#define KEY_PLAYER 0x183
+#define KEY_TEXT 0x184
+#define KEY_DVD 0x185 /* Media Select DVD */
+#define KEY_AUX 0x186
+#define KEY_MP3 0x187
+#define KEY_AUDIO 0x188 /* AL Audio Browser */
+#define KEY_VIDEO 0x189 /* AL Movie Browser */
+#define KEY_DIRECTORY 0x18a
+#define KEY_LIST 0x18b
+#define KEY_MEMO 0x18c /* Media Select Messages */
+#define KEY_CALENDAR 0x18d
+#define KEY_RED 0x18e
+#define KEY_GREEN 0x18f
+#define KEY_YELLOW 0x190
+#define KEY_BLUE 0x191
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+#define KEY_FIRST 0x194
+#define KEY_LAST 0x195 /* Recall Last */
+#define KEY_AB 0x196
+#define KEY_NEXT 0x197
+#define KEY_RESTART 0x198
+#define KEY_SLOW 0x199
+#define KEY_SHUFFLE 0x19a
+#define KEY_BREAK 0x19b
+#define KEY_PREVIOUS 0x19c
+#define KEY_DIGITS 0x19d
+#define KEY_TEEN 0x19e
+#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+#define KEY_IMAGES 0x1ba /* AL Image Browser */
+
+#define KEY_DEL_EOL 0x1c0
+#define KEY_DEL_EOS 0x1c1
+#define KEY_INS_LINE 0x1c2
+#define KEY_DEL_LINE 0x1c3
+
+#define KEY_FN 0x1d0
+#define KEY_FN_ESC 0x1d1
+#define KEY_FN_F1 0x1d2
+#define KEY_FN_F2 0x1d3
+#define KEY_FN_F3 0x1d4
+#define KEY_FN_F4 0x1d5
+#define KEY_FN_F5 0x1d6
+#define KEY_FN_F6 0x1d7
+#define KEY_FN_F7 0x1d8
+#define KEY_FN_F8 0x1d9
+#define KEY_FN_F9 0x1da
+#define KEY_FN_F10 0x1db
+#define KEY_FN_F11 0x1dc
+#define KEY_FN_F12 0x1dd
+#define KEY_FN_1 0x1de
+#define KEY_FN_2 0x1df
+#define KEY_FN_D 0x1e0
+#define KEY_FN_E 0x1e1
+#define KEY_FN_F 0x1e2
+#define KEY_FN_S 0x1e3
+#define KEY_FN_B 0x1e4
+
+#define KEY_BRL_DOT1 0x1f1
+#define KEY_BRL_DOT2 0x1f2
+#define KEY_BRL_DOT3 0x1f3
+#define KEY_BRL_DOT4 0x1f4
+#define KEY_BRL_DOT5 0x1f5
+#define KEY_BRL_DOT6 0x1f6
+#define KEY_BRL_DOT7 0x1f7
+#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
+#define KEY_NUMERIC_B 0x20d
+#define KEY_NUMERIC_C 0x20e
+#define KEY_NUMERIC_D 0x20f
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
+#define KEY_CAMERA_ZOOMIN 0x215
+#define KEY_CAMERA_ZOOMOUT 0x216
+#define KEY_CAMERA_UP 0x217
+#define KEY_CAMERA_DOWN 0x218
+#define KEY_CAMERA_LEFT 0x219
+#define KEY_CAMERA_RIGHT 0x21a
+
+#define KEY_ATTENDANT_ON 0x21b
+#define KEY_ATTENDANT_OFF 0x21c
+#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
+#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+
+#define BTN_DPAD_UP 0x220
+#define BTN_DPAD_DOWN 0x221
+#define BTN_DPAD_LEFT 0x222
+#define BTN_DPAD_RIGHT 0x223
+
+#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
+
+#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
+#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
+#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
+#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
+#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
+#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
+#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
+
+#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
+#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
+
+#define KEY_KBDINPUTASSIST_PREV 0x260
+#define KEY_KBDINPUTASSIST_NEXT 0x261
+#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
+#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
+#define KEY_KBDINPUTASSIST_ACCEPT 0x264
+#define KEY_KBDINPUTASSIST_CANCEL 0x265
+
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING KEY_MUTE
+#define KEY_MAX 0x2ff
+#define KEY_CNT (KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X 0x00
+#define REL_Y 0x01
+#define REL_Z 0x02
+#define REL_RX 0x03
+#define REL_RY 0x04
+#define REL_RZ 0x05
+#define REL_HWHEEL 0x06
+#define REL_DIAL 0x07
+#define REL_WHEEL 0x08
+#define REL_MISC 0x09
+#define REL_MAX 0x0f
+#define REL_CNT (REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X 0x00
+#define ABS_Y 0x01
+#define ABS_Z 0x02
+#define ABS_RX 0x03
+#define ABS_RY 0x04
+#define ABS_RZ 0x05
+#define ABS_THROTTLE 0x06
+#define ABS_RUDDER 0x07
+#define ABS_WHEEL 0x08
+#define ABS_GAS 0x09
+#define ABS_BRAKE 0x0a
+#define ABS_HAT0X 0x10
+#define ABS_HAT0Y 0x11
+#define ABS_HAT1X 0x12
+#define ABS_HAT1Y 0x13
+#define ABS_HAT2X 0x14
+#define ABS_HAT2Y 0x15
+#define ABS_HAT3X 0x16
+#define ABS_HAT3Y 0x17
+#define ABS_PRESSURE 0x18
+#define ABS_DISTANCE 0x19
+#define ABS_TILT_X 0x1a
+#define ABS_TILT_Y 0x1b
+#define ABS_TOOL_WIDTH 0x1c
+
+#define ABS_VOLUME 0x20
+
+#define ABS_MISC 0x28
+
+#define ABS_MT_SLOT 0x2f /* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
+#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
+#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
+#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
+
+
+#define ABS_MAX 0x3f
+#define ABS_CNT (ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
+#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
+#define SW_DOCK 0x05 /* set = plugged into dock */
+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
+#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
+#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT 0x0d /* set = inserted */
+#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
+#define SW_MAX 0x0f
+#define SW_CNT (SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL 0x00
+#define MSC_PULSELED 0x01
+#define MSC_GESTURE 0x02
+#define MSC_RAW 0x03
+#define MSC_SCAN 0x04
+#define MSC_TIMESTAMP 0x05
+#define MSC_MAX 0x07
+#define MSC_CNT (MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML 0x00
+#define LED_CAPSL 0x01
+#define LED_SCROLLL 0x02
+#define LED_COMPOSE 0x03
+#define LED_KANA 0x04
+#define LED_SLEEP 0x05
+#define LED_SUSPEND 0x06
+#define LED_MUTE 0x07
+#define LED_MISC 0x08
+#define LED_MAIL 0x09
+#define LED_CHARGING 0x0a
+#define LED_MAX 0x0f
+#define LED_CNT (LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY 0x00
+#define REP_PERIOD 0x01
+#define REP_MAX 0x01
+#define REP_CNT (REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK 0x00
+#define SND_BELL 0x01
+#define SND_TONE 0x02
+#define SND_MAX 0x07
+#define SND_CNT (SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS 0
+#define ID_VENDOR 1
+#define ID_PRODUCT 2
+#define ID_VERSION 3
+
+#define BUS_PCI 0x01
+#define BUS_ISAPNP 0x02
+#define BUS_USB 0x03
+#define BUS_HIL 0x04
+#define BUS_BLUETOOTH 0x05
+#define BUS_VIRTUAL 0x06
+
+#define BUS_ISA 0x10
+#define BUS_I8042 0x11
+#define BUS_XTKBD 0x12
+#define BUS_RS232 0x13
+#define BUS_GAMEPORT 0x14
+#define BUS_PARPORT 0x15
+#define BUS_AMIGA 0x16
+#define BUS_ADB 0x17
+#define BUS_I2C 0x18
+#define BUS_HOST 0x19
+#define BUS_GSC 0x1A
+#define BUS_ATARI 0x1B
+#define BUS_SPI 0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+#define MT_TOOL_PALM 2
+#define MT_TOOL_MAX 2
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED 0x00
+#define FF_STATUS_PLAYING 0x01
+#define FF_STATUS_MAX 0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+ uint16_t length;
+ uint16_t delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+ uint16_t button;
+ uint16_t interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+ uint16_t attack_length;
+ uint16_t attack_level;
+ uint16_t fade_length;
+ uint16_t fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+ int16_t level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+ int16_t start_level;
+ int16_t end_level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ * to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+ uint16_t right_saturation;
+ uint16_t left_saturation;
+
+ int16_t right_coeff;
+ int16_t left_coeff;
+
+ uint16_t deadband;
+ int16_t center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+ uint16_t waveform;
+ uint16_t period;
+ int16_t magnitude;
+ int16_t offset;
+ uint16_t phase;
+
+ struct ff_envelope envelope;
+
+ uint32_t custom_len;
+ int16_t *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+ uint16_t strong_magnitude;
+ uint16_t weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ * defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ * 0 deg -> 0x0000 (down)
+ * 90 deg -> 0x4000 (left)
+ * 180 deg -> 0x8000 (up)
+ * 270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+ uint16_t type;
+ int16_t id;
+ uint16_t direction;
+ struct ff_trigger trigger;
+ struct ff_replay replay;
+
+ union {
+ struct ff_constant_effect constant;
+ struct ff_ramp_effect ramp;
+ struct ff_periodic_effect periodic;
+ struct ff_condition_effect condition[2]; /* One for each axis */
+ struct ff_rumble_effect rumble;
+ } u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE 0x50
+#define FF_PERIODIC 0x51
+#define FF_CONSTANT 0x52
+#define FF_SPRING 0x53
+#define FF_FRICTION 0x54
+#define FF_DAMPER 0x55
+#define FF_INERTIA 0x56
+#define FF_RAMP 0x57
+
+#define FF_EFFECT_MIN FF_RUMBLE
+#define FF_EFFECT_MAX FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE 0x58
+#define FF_TRIANGLE 0x59
+#define FF_SINE 0x5a
+#define FF_SAW_UP 0x5b
+#define FF_SAW_DOWN 0x5c
+#define FF_CUSTOM 0x5d
+
+#define FF_WAVEFORM_MIN FF_SQUARE
+#define FF_WAVEFORM_MAX FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN 0x60
+#define FF_AUTOCENTER 0x61
+
+#define FF_MAX 0x7f
+#define FF_CNT (FF_MAX+1)
+
+#endif /* _INPUT_H */
diff --git a/qemu/include/standard-headers/linux/pci_regs.h b/qemu/include/standard-headers/linux/pci_regs.h
new file mode 100644
index 000000000..57e8c80c3
--- /dev/null
+++ b/qemu/include/standard-headers/linux/pci_regs.h
@@ -0,0 +1,719 @@
+/*
+ * pci_regs.h
+ *
+ * PCI standard defines
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ *
+ * For hypertransport information, please consult the following manuals
+ * from http://www.hypertransport.org
+ *
+ * The Hypertransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bits */
+#define PCI_DEVICE_ID 0x02 /* 16 bits */
+#define PCI_COMMAND 0x04 /* 16 bits */
+#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
+#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
+#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
+#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
+#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
+#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
+#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
+#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
+#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
+#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
+#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
+#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
+#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
+#define PCI_STATUS_DEVSEL_FAST 0x000
+#define PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define PCI_STATUS_DEVSEL_SLOW 0x400
+#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID 0x08 /* Revision ID */
+#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE 0x0a /* Device class */
+
+#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
+#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
+#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+#define PCI_HEADER_TYPE_NORMAL 0
+#define PCI_HEADER_TYPE_BRIDGE 1
+#define PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST 0x0f /* 8 bits */
+#define PCI_BIST_CODE_MASK 0x0f /* Return result */
+#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
+#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back. Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
+#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
+#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
+#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
+#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
+#define PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
+#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
+#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
+#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
+#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
+#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS 0x28
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+#define PCI_SUBSYSTEM_ID 0x2e
+#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
+#define PCI_ROM_ADDRESS_ENABLE 0x01
+#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
+#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
+#define PCI_MIN_GNT 0x3e /* 8 bits */
+#define PCI_MAX_LAT 0x3f /* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
+#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
+#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
+#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
+#define PCI_IO_LIMIT 0x1d
+#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */
+#define PCI_IO_RANGE_TYPE_16 0x00
+#define PCI_IO_RANGE_TYPE_32 0x01
+#define PCI_IO_RANGE_MASK (~0x0fUL)
+#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
+#define PCI_MEMORY_LIMIT 0x22
+#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define PCI_MEMORY_RANGE_MASK (~0x0fUL)
+#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT 0x26
+#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define PCI_PREF_RANGE_TYPE_32 0x00
+#define PCI_PREF_RANGE_TYPE_64 0x01
+#define PCI_PREF_RANGE_MASK (~0x0fUL)
+#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32 0x2c
+#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16 0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL 0x3e
+#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
+#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
+#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */
+#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
+#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
+#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
+#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST 0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
+#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
+#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0 0x1c
+#define PCI_CB_MEMORY_LIMIT_0 0x20
+#define PCI_CB_MEMORY_BASE_1 0x24
+#define PCI_CB_MEMORY_LIMIT_1 0x28
+#define PCI_CB_IO_BASE_0 0x2c
+#define PCI_CB_IO_BASE_0_HI 0x2e
+#define PCI_CB_IO_LIMIT_0 0x30
+#define PCI_CB_IO_LIMIT_0_HI 0x32
+#define PCI_CB_IO_BASE_1 0x34
+#define PCI_CB_IO_BASE_1_HI 0x36
+#define PCI_CB_IO_LIMIT_1 0x38
+#define PCI_CB_IO_LIMIT_1_HI 0x3a
+#define PCI_CB_IO_RANGE_MASK (~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL 0x3e
+#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
+#define PCI_CB_BRIDGE_CTL_SERR 0x02
+#define PCI_CB_BRIDGE_CTL_ISA 0x04
+#define PCI_CB_BRIDGE_CTL_VGA 0x08
+#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
+#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
+#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID 0x42
+#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID 0 /* Capability ID */
+#define PCI_CAP_ID_PM 0x01 /* Power Management */
+#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
+#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
+#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
+#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
+#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
+#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_DBG 0x0A /* Debug port */
+#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
+#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_CAP_ID_SATA 0x12 /* Serial ATA */
+#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
+#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF 4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC 2 /* PM Capabilities Register */
+#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
+#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
+#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */
+#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
+#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */
+#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
+#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
+#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
+#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */
+#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */
+#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */
+#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
+#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
+#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
+#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
+#define PCI_PM_CTRL 4 /* PM control and status register */
+#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
+#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */
+#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
+#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
+#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
+#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
+#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
+#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER 7 /* (??) */
+#define PCI_PM_SIZEOF 8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION 2 /* BCD version number */
+#define PCI_AGP_RFU 3 /* Rest of capability flags */
+#define PCI_AGP_STATUS 4 /* Status register */
+#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
+#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
+#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
+#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
+#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
+#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
+#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
+#define PCI_AGP_COMMAND 8 /* Control register */
+#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
+#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
+#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
+#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
+#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
+#define PCI_AGP_SIZEOF 12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */
+#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
+#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
+
+/* Slot Identification */
+
+#define PCI_SID_ESR 2 /* Expansion Slot Register */
+#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
+#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS 2 /* Various flags */
+#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
+#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
+#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
+#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
+#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */
+#define PCI_MSI_RFU 3 /* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 16 /* Pending bits register for 32-bit devices */
+#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64 20 /* Pending bits register for 32-bit devices */
+
+/* MSI-X registers */
+#define PCI_MSIX_FLAGS 2
+#define PCI_MSIX_FLAGS_QSIZE 0x7FF
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
+#define PCI_MSIX_TABLE 4
+#define PCI_MSIX_PBA 8
+#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
+
+/* MSI-X entry's format */
+#define PCI_MSIX_ENTRY_SIZE 16
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0
+#define PCI_MSIX_ENTRY_UPPER_ADDR 4
+#define PCI_MSIX_ENTRY_DATA 8
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
+#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR 2 /* Control and Status Register */
+#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */
+#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */
+#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */
+#define PCI_CHSWP_LOO 0x08 /* LED On / Off */
+#define PCI_CHSWP_PI 0x30 /* Programming Interface */
+#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */
+#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */
+
+/* PCI Advanced Feature registers */
+
+#define PCI_AF_LENGTH 2
+#define PCI_AF_CAP 3
+#define PCI_AF_CAP_TP 0x01
+#define PCI_AF_CAP_FLR 0x02
+#define PCI_AF_CTRL 4
+#define PCI_AF_CTRL_FLR 0x01
+#define PCI_AF_STATUS 5
+#define PCI_AF_STATUS_TP 0x01
+
+/* PCI-X registers */
+
+#define PCI_X_CMD 2 /* Modes & Features */
+#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
+#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
+#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */
+#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */
+#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */
+#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */
+#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */
+ /* Max # of outstanding split transactions */
+#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */
+#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */
+#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */
+#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */
+#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */
+#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */
+#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
+#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
+#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS 4 /* PCI-X capabilities */
+#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
+#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
+#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */
+#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */
+#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */
+#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */
+#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */
+#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */
+#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */
+#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */
+#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
+#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
+#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
+
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS 2 /* Capabilities register */
+#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */
+#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
+#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */
+#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */
+#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
+#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
+#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
+#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
+#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
+#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
+#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
+#define PCI_EXP_DEVCAP 4 /* Device capabilities */
+#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
+#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
+#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
+#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
+#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
+#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
+#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
+#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
+#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
+#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
+#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL 8 /* Device Control */
+#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
+#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
+#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
+#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
+#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
+#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
+#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
+#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
+#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
+#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
+#define PCI_EXP_DEVSTA 10 /* Device Status */
+#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
+#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
+#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
+#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
+#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
+#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
+#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
+#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
+#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
+#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
+#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
+#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
+#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
+#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
+#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
+#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
+#define PCI_EXP_LNKCTL 16 /* Link Control */
+#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
+#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
+#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
+#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
+#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
+#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
+#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
+#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
+#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKSTA 18 /* Link Status */
+#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
+#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
+#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
+#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
+#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
+#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
+#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
+#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
+#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
+#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
+#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */
+#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */
+#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */
+#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */
+#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
+#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */
+#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */
+#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
+#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
+#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCTL 24 /* Slot Control */
+#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
+#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
+#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */
+#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */
+#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
+#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
+#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
+#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
+#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */
+#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
+#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTSTA 26 /* Slot Status */
+#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
+#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
+#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */
+#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */
+#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */
+#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */
+#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */
+#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
+#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
+#define PCI_EXP_RTCTL 28 /* Root Control */
+#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
+#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
+#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
+#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
+#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP 30 /* Root Capabilities */
+#define PCI_EXP_RTSTA 32 /* Root Status */
+#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
+#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
+#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
+#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
+#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
+#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
+#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
+#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
+#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
+#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR 1
+#define PCI_EXT_CAP_ID_VC 2
+#define PCI_EXT_CAP_ID_DSN 3
+#define PCI_EXT_CAP_ID_PWR 4
+#define PCI_EXT_CAP_ID_VNDR 11
+#define PCI_EXT_CAP_ID_ACS 13
+#define PCI_EXT_CAP_ID_ARI 14
+#define PCI_EXT_CAP_ID_ATS 15
+#define PCI_EXT_CAP_ID_SRIOV 16
+#define PCI_EXT_CAP_ID_LTR 24
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
+#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
+#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
+#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
+#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
+#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
+#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */
+#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */
+#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */
+#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
+#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
+#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
+#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
+ /* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
+ /* Same bits as above */
+#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
+#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
+#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
+#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
+#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
+#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
+#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
+ /* Same bits as above */
+#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
+#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */
+#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */
+#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */
+#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */
+#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004
+#define PCI_ERR_ROOT_STATUS 48
+#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
+#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1 4
+#define PCI_VC_PORT_REG2 8
+#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_STATUS 26
+
+/* Power Budgeting */
+#define PCI_PWR_DSR 4 /* Data Select Register */
+#define PCI_PWR_DATA 8 /* Data Register */
+#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */
+#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */
+#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */
+#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */
+#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
+#define PCI_PWR_CAP 12 /* Capability */
+#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
+
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK 0xE0
+#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK 0xF8
+#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */
+#define HT_MSI_FLAGS 0x02 /* Offset to flags */
+#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */
+#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */
+#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */
+#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */
+#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */
+#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
+#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+
+/* Alternative Routing-ID Interpretation */
+#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
+#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */
+#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */
+#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */
+#define PCI_ARI_CTRL 0x06 /* ARI Control Register */
+#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
+#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
+#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
+
+/* Address Translation Service */
+#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
+#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */
+#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL 0x06 /* ATS Control Register */
+#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
+#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
+#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+
+/* Single Root I/O Virtualization */
+#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
+#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */
+#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */
+#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */
+#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */
+#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */
+#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */
+#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */
+#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */
+#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */
+#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */
+#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */
+#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */
+#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */
+#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */
+#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */
+#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */
+#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */
+#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */
+#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */
+#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/
+#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */
+#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */
+#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */
+#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
+#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
+#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+
+#define PCI_LTR_MAX_SNOOP_LAT 0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
+#define PCI_LTR_VALUE_MASK 0x000003ff
+#define PCI_LTR_SCALE_MASK 0x00001c00
+#define PCI_LTR_SCALE_SHIFT 10
+
+/* Access Control Service */
+#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
+#define PCI_ACS_SV 0x01 /* Source Validation */
+#define PCI_ACS_TB 0x02 /* Translation Blocking */
+#define PCI_ACS_RR 0x04 /* P2P Request Redirect */
+#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */
+#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
+#define PCI_ACS_EC 0x20 /* P2P Egress Control */
+#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+
+#endif /* LINUX_PCI_REGS_H */
diff --git a/qemu/include/standard-headers/linux/types.h b/qemu/include/standard-headers/linux/types.h
new file mode 100644
index 000000000..0526c2b87
--- /dev/null
+++ b/qemu/include/standard-headers/linux/types.h
@@ -0,0 +1,2 @@
+#include <stdint.h>
+#include "qemu/compiler.h"
diff --git a/qemu/include/standard-headers/linux/virtio_9p.h b/qemu/include/standard-headers/linux/virtio_9p.h
new file mode 100644
index 000000000..e68f71dbe
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_9p.h
@@ -0,0 +1,44 @@
+#ifndef _LINUX_VIRTIO_9P_H
+#define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+
+/* The feature bitmap for virtio 9P */
+
+/* The mount point is specified in a config variable */
+#define VIRTIO_9P_MOUNT_TAG 0
+
+struct virtio_9p_config {
+ /* length of the tag name */
+ uint16_t tag_len;
+ /* non-NULL terminated tag name */
+ uint8_t tag[0];
+} QEMU_PACKED;
+
+#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/qemu/include/standard-headers/linux/virtio_balloon.h b/qemu/include/standard-headers/linux/virtio_balloon.h
new file mode 100644
index 000000000..2e2a6dcf3
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_balloon.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
+#define VIRTIO_BALLOON_F_DEFLATE_ON_OOM 2 /* Deflate balloon on OOM */
+
+/* Size of a PFN in the balloon interface. */
+#define VIRTIO_BALLOON_PFN_SHIFT 12
+
+struct virtio_balloon_config {
+ /* Number of pages host wants Guest to give up. */
+ uint32_t num_pages;
+ /* Number of pages we've actually got in balloon. */
+ uint32_t actual;
+};
+
+#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR 6
+
+/*
+ * Memory statistics structure.
+ * Driver fills an array of these structures and passes to device.
+ *
+ * NOTE: fields are laid out in a way that would make compiler add padding
+ * between and after fields, so we have to use compiler-specific attributes to
+ * pack it, to disable this padding. This also often causes compiler to
+ * generate suboptimal code.
+ *
+ * We maintain this statistics structure format for backwards compatibility,
+ * but don't follow this example.
+ *
+ * If implementing a similar structure, do something like the below instead:
+ * struct virtio_balloon_stat {
+ * __virtio16 tag;
+ * uint8_t reserved[6];
+ * __virtio64 val;
+ * };
+ *
+ * In other words, add explicit reserved fields to align field and
+ * structure boundaries at field size, avoiding compiler padding
+ * without the packed attribute.
+ */
+struct virtio_balloon_stat {
+ __virtio16 tag;
+ __virtio64 val;
+} QEMU_PACKED;
+
+#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/qemu/include/standard-headers/linux/virtio_blk.h b/qemu/include/standard-headers/linux/virtio_blk.h
new file mode 100644
index 000000000..cd601f406
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_blk.h
@@ -0,0 +1,147 @@
+#ifndef _LINUX_VIRTIO_BLK_H
+#define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+#include "standard-headers/linux/virtio_types.h"
+
+/* Feature bits */
+#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
+#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
+#define VIRTIO_BLK_F_MQ 12 /* support more than one vq */
+
+/* Legacy feature bits */
+#ifndef VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
+#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
+#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */
+#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */
+/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
+#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+#define VIRTIO_BLK_ID_BYTES 20 /* ID string length */
+
+struct virtio_blk_config {
+ /* The capacity (in 512-byte sectors). */
+ uint64_t capacity;
+ /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+ uint32_t size_max;
+ /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+ uint32_t seg_max;
+ /* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */
+ struct virtio_blk_geometry {
+ uint16_t cylinders;
+ uint8_t heads;
+ uint8_t sectors;
+ } geometry;
+
+ /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+ uint32_t blk_size;
+
+ /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */
+ /* exponent for physical block per logical block. */
+ uint8_t physical_block_exp;
+ /* alignment offset in logical blocks. */
+ uint8_t alignment_offset;
+ /* minimum I/O size without performance penalty in logical blocks. */
+ uint16_t min_io_size;
+ /* optimal sustained I/O size in logical blocks. */
+ uint32_t opt_io_size;
+
+ /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
+ uint8_t wce;
+ uint8_t unused;
+
+ /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */
+ uint16_t num_queues;
+} QEMU_PACKED;
+
+/*
+ * Command types
+ *
+ * Usage is a bit tricky as some bits are used as flags and some are not.
+ *
+ * Rules:
+ * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
+ * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own
+ * and may not be combined with any of the other flags.
+ */
+
+/* These two define direction. */
+#define VIRTIO_BLK_T_IN 0
+#define VIRTIO_BLK_T_OUT 1
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+/* This bit says it's a scsi command, not an actual read or write. */
+#define VIRTIO_BLK_T_SCSI_CMD 2
+#endif /* VIRTIO_BLK_NO_LEGACY */
+
+/* Cache flush command */
+#define VIRTIO_BLK_T_FLUSH 4
+
+/* Get device ID command */
+#define VIRTIO_BLK_T_GET_ID 8
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+/* Barrier before this op. */
+#define VIRTIO_BLK_T_BARRIER 0x80000000
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+/*
+ * This comes first in the read scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated,
+ * this is the first element of the read scatter-gather list.
+ */
+struct virtio_blk_outhdr {
+ /* VIRTIO_BLK_T* */
+ __virtio32 type;
+ /* io priority. */
+ __virtio32 ioprio;
+ /* Sector (ie. 512 byte offset) */
+ __virtio64 sector;
+};
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+struct virtio_scsi_inhdr {
+ __virtio32 errors;
+ __virtio32 data_len;
+ __virtio32 sense_len;
+ __virtio32 residual;
+};
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+/* And this is the final byte of the write scatter-gather list. */
+#define VIRTIO_BLK_S_OK 0
+#define VIRTIO_BLK_S_IOERR 1
+#define VIRTIO_BLK_S_UNSUPP 2
+#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/qemu/include/standard-headers/linux/virtio_config.h b/qemu/include/standard-headers/linux/virtio_config.h
new file mode 100644
index 000000000..bcc445b3d
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_config.h
@@ -0,0 +1,64 @@
+#ifndef _LINUX_VIRTIO_CONFIG_H
+#define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include "standard-headers/linux/types.h"
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER 2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK 4
+/* Driver has finished configuring features */
+#define VIRTIO_CONFIG_S_FEATURES_OK 8
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED 0x80
+
+/* Some virtio feature bits (currently bits 28 through 32) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START 28
+#define VIRTIO_TRANSPORT_F_END 33
+
+#ifndef VIRTIO_CONFIG_NO_LEGACY
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
+/* Can the device handle any descriptor layout? */
+#define VIRTIO_F_ANY_LAYOUT 27
+#endif /* VIRTIO_CONFIG_NO_LEGACY */
+
+/* v1.0 compliant. */
+#define VIRTIO_F_VERSION_1 32
+
+#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/qemu/include/standard-headers/linux/virtio_console.h b/qemu/include/standard-headers/linux/virtio_console.h
new file mode 100644
index 000000000..0dedc9e6f
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_console.h
@@ -0,0 +1,78 @@
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
+#define VIRTIO_CONSOLE_F_EMERG_WRITE 2 /* Does host support emergency write? */
+
+#define VIRTIO_CONSOLE_BAD_ID (~(uint32_t)0)
+
+struct virtio_console_config {
+ /* colums of the screens */
+ uint16_t cols;
+ /* rows of the screens */
+ uint16_t rows;
+ /* max. number of ports this device can hold */
+ uint32_t max_nr_ports;
+ /* emergency write register */
+ uint32_t emerg_wr;
+} QEMU_PACKED;
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+ __virtio32 id; /* Port number */
+ __virtio16 event; /* The kind of control event (see below) */
+ __virtio16 value; /* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY 0
+#define VIRTIO_CONSOLE_PORT_ADD 1
+#define VIRTIO_CONSOLE_PORT_REMOVE 2
+#define VIRTIO_CONSOLE_PORT_READY 3
+#define VIRTIO_CONSOLE_CONSOLE_PORT 4
+#define VIRTIO_CONSOLE_RESIZE 5
+#define VIRTIO_CONSOLE_PORT_OPEN 6
+#define VIRTIO_CONSOLE_PORT_NAME 7
+
+
+#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/qemu/include/standard-headers/linux/virtio_gpu.h b/qemu/include/standard-headers/linux/virtio_gpu.h
new file mode 100644
index 000000000..72ef815f5
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_gpu.h
@@ -0,0 +1,206 @@
+/*
+ * Virtio GPU Device
+ *
+ * Copyright Red Hat, Inc. 2013-2014
+ *
+ * Authors:
+ * Dave Airlie <airlied@redhat.com>
+ * Gerd Hoffmann <kraxel@redhat.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions
+ * to implement compatible drivers/servers:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef VIRTIO_GPU_HW_H
+#define VIRTIO_GPU_HW_H
+
+#include "standard-headers/linux/types.h"
+
+enum virtio_gpu_ctrl_type {
+ VIRTIO_GPU_UNDEFINED = 0,
+
+ /* 2d commands */
+ VIRTIO_GPU_CMD_GET_DISPLAY_INFO = 0x0100,
+ VIRTIO_GPU_CMD_RESOURCE_CREATE_2D,
+ VIRTIO_GPU_CMD_RESOURCE_UNREF,
+ VIRTIO_GPU_CMD_SET_SCANOUT,
+ VIRTIO_GPU_CMD_RESOURCE_FLUSH,
+ VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D,
+ VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING,
+ VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING,
+
+ /* cursor commands */
+ VIRTIO_GPU_CMD_UPDATE_CURSOR = 0x0300,
+ VIRTIO_GPU_CMD_MOVE_CURSOR,
+
+ /* success responses */
+ VIRTIO_GPU_RESP_OK_NODATA = 0x1100,
+ VIRTIO_GPU_RESP_OK_DISPLAY_INFO,
+
+ /* error responses */
+ VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200,
+ VIRTIO_GPU_RESP_ERR_OUT_OF_MEMORY,
+ VIRTIO_GPU_RESP_ERR_INVALID_SCANOUT_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_RESOURCE_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_CONTEXT_ID,
+ VIRTIO_GPU_RESP_ERR_INVALID_PARAMETER,
+};
+
+#define VIRTIO_GPU_FLAG_FENCE (1 << 0)
+
+struct virtio_gpu_ctrl_hdr {
+ uint32_t type;
+ uint32_t flags;
+ uint64_t fence_id;
+ uint32_t ctx_id;
+ uint32_t padding;
+};
+
+/* data passed in the cursor vq */
+
+struct virtio_gpu_cursor_pos {
+ uint32_t scanout_id;
+ uint32_t x;
+ uint32_t y;
+ uint32_t padding;
+};
+
+/* VIRTIO_GPU_CMD_UPDATE_CURSOR, VIRTIO_GPU_CMD_MOVE_CURSOR */
+struct virtio_gpu_update_cursor {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_cursor_pos pos; /* update & move */
+ uint32_t resource_id; /* update only */
+ uint32_t hot_x; /* update only */
+ uint32_t hot_y; /* update only */
+ uint32_t padding;
+};
+
+/* data passed in the control vq, 2d related */
+
+struct virtio_gpu_rect {
+ uint32_t x;
+ uint32_t y;
+ uint32_t width;
+ uint32_t height;
+};
+
+/* VIRTIO_GPU_CMD_RESOURCE_UNREF */
+struct virtio_gpu_resource_unref {
+ struct virtio_gpu_ctrl_hdr hdr;
+ uint32_t resource_id;
+ uint32_t padding;
+};
+
+/* VIRTIO_GPU_CMD_RESOURCE_CREATE_2D: create a 2d resource with a format */
+struct virtio_gpu_resource_create_2d {
+ struct virtio_gpu_ctrl_hdr hdr;
+ uint32_t resource_id;
+ uint32_t format;
+ uint32_t width;
+ uint32_t height;
+};
+
+/* VIRTIO_GPU_CMD_SET_SCANOUT */
+struct virtio_gpu_set_scanout {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ uint32_t scanout_id;
+ uint32_t resource_id;
+};
+
+/* VIRTIO_GPU_CMD_RESOURCE_FLUSH */
+struct virtio_gpu_resource_flush {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ uint32_t resource_id;
+ uint32_t padding;
+};
+
+/* VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D: simple transfer to_host */
+struct virtio_gpu_transfer_to_host_2d {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_rect r;
+ uint64_t offset;
+ uint32_t resource_id;
+ uint32_t padding;
+};
+
+struct virtio_gpu_mem_entry {
+ uint64_t addr;
+ uint32_t length;
+ uint32_t padding;
+};
+
+/* VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING */
+struct virtio_gpu_resource_attach_backing {
+ struct virtio_gpu_ctrl_hdr hdr;
+ uint32_t resource_id;
+ uint32_t nr_entries;
+};
+
+/* VIRTIO_GPU_CMD_RESOURCE_DETACH_BACKING */
+struct virtio_gpu_resource_detach_backing {
+ struct virtio_gpu_ctrl_hdr hdr;
+ uint32_t resource_id;
+ uint32_t padding;
+};
+
+/* VIRTIO_GPU_RESP_OK_DISPLAY_INFO */
+#define VIRTIO_GPU_MAX_SCANOUTS 16
+struct virtio_gpu_resp_display_info {
+ struct virtio_gpu_ctrl_hdr hdr;
+ struct virtio_gpu_display_one {
+ struct virtio_gpu_rect r;
+ uint32_t enabled;
+ uint32_t flags;
+ } pmodes[VIRTIO_GPU_MAX_SCANOUTS];
+};
+
+#define VIRTIO_GPU_EVENT_DISPLAY (1 << 0)
+
+struct virtio_gpu_config {
+ uint32_t events_read;
+ uint32_t events_clear;
+ uint32_t num_scanouts;
+ uint32_t reserved;
+};
+
+/* simple formats for fbcon/X use */
+enum virtio_gpu_formats {
+ VIRTIO_GPU_FORMAT_B8G8R8A8_UNORM = 1,
+ VIRTIO_GPU_FORMAT_B8G8R8X8_UNORM = 2,
+ VIRTIO_GPU_FORMAT_A8R8G8B8_UNORM = 3,
+ VIRTIO_GPU_FORMAT_X8R8G8B8_UNORM = 4,
+
+ VIRTIO_GPU_FORMAT_R8G8B8A8_UNORM = 67,
+ VIRTIO_GPU_FORMAT_X8B8G8R8_UNORM = 68,
+
+ VIRTIO_GPU_FORMAT_A8B8G8R8_UNORM = 121,
+ VIRTIO_GPU_FORMAT_R8G8B8X8_UNORM = 134,
+};
+
+#endif
diff --git a/qemu/include/standard-headers/linux/virtio_ids.h b/qemu/include/standard-headers/linux/virtio_ids.h
new file mode 100644
index 000000000..77925f587
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_ids.h
@@ -0,0 +1,45 @@
+#ifndef _LINUX_VIRTIO_IDS_H
+#define _LINUX_VIRTIO_IDS_H
+/*
+ * Virtio IDs
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+#define VIRTIO_ID_NET 1 /* virtio net */
+#define VIRTIO_ID_BLOCK 2 /* virtio block */
+#define VIRTIO_ID_CONSOLE 3 /* virtio console */
+#define VIRTIO_ID_RNG 4 /* virtio rng */
+#define VIRTIO_ID_BALLOON 5 /* virtio balloon */
+#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */
+#define VIRTIO_ID_SCSI 8 /* virtio scsi */
+#define VIRTIO_ID_9P 9 /* 9p virtio console */
+#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */
+#define VIRTIO_ID_CAIF 12 /* Virtio caif */
+#define VIRTIO_ID_GPU 16 /* virtio GPU */
+#define VIRTIO_ID_INPUT 18 /* virtio input */
+
+#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/qemu/include/standard-headers/linux/virtio_input.h b/qemu/include/standard-headers/linux/virtio_input.h
new file mode 100644
index 000000000..a98a7974c
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_input.h
@@ -0,0 +1,76 @@
+#ifndef _LINUX_VIRTIO_INPUT_H
+#define _LINUX_VIRTIO_INPUT_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+#include "standard-headers/linux/types.h"
+
+enum virtio_input_config_select {
+ VIRTIO_INPUT_CFG_UNSET = 0x00,
+ VIRTIO_INPUT_CFG_ID_NAME = 0x01,
+ VIRTIO_INPUT_CFG_ID_SERIAL = 0x02,
+ VIRTIO_INPUT_CFG_ID_DEVIDS = 0x03,
+ VIRTIO_INPUT_CFG_PROP_BITS = 0x10,
+ VIRTIO_INPUT_CFG_EV_BITS = 0x11,
+ VIRTIO_INPUT_CFG_ABS_INFO = 0x12,
+};
+
+struct virtio_input_absinfo {
+ uint32_t min;
+ uint32_t max;
+ uint32_t fuzz;
+ uint32_t flat;
+ uint32_t res;
+};
+
+struct virtio_input_devids {
+ uint16_t bustype;
+ uint16_t vendor;
+ uint16_t product;
+ uint16_t version;
+};
+
+struct virtio_input_config {
+ uint8_t select;
+ uint8_t subsel;
+ uint8_t size;
+ uint8_t reserved[5];
+ union {
+ char string[128];
+ uint8_t bitmap[128];
+ struct virtio_input_absinfo abs;
+ struct virtio_input_devids ids;
+ } u;
+};
+
+struct virtio_input_event {
+ uint16_t type;
+ uint16_t code;
+ uint32_t value;
+};
+
+#endif /* _LINUX_VIRTIO_INPUT_H */
diff --git a/qemu/include/standard-headers/linux/virtio_net.h b/qemu/include/standard-headers/linux/virtio_net.h
new file mode 100644
index 000000000..a78f33e77
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_net.h
@@ -0,0 +1,245 @@
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+#include "standard-headers/linux/virtio_types.h"
+#include "standard-headers/linux/if_ether.h"
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
+#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
+#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
+#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
+ * network */
+#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
+ * Steering */
+#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
+
+#ifndef VIRTIO_NET_NO_LEGACY
+#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
+#endif /* VIRTIO_NET_NO_LEGACY */
+
+#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
+#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
+
+struct virtio_net_config {
+ /* The config defining mac address (if VIRTIO_NET_F_MAC) */
+ uint8_t mac[ETH_ALEN];
+ /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+ uint16_t status;
+ /* Maximum number of each of transmit and receive queues;
+ * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
+ * Legal values are between 1 and 0x8000
+ */
+ uint16_t max_virtqueue_pairs;
+} QEMU_PACKED;
+
+/*
+ * This header comes first in the scatter-gather list. If you don't
+ * specify GSO or CSUM features, you can simply ignore the header.
+ *
+ * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
+ * only flattened.
+ */
+struct virtio_net_hdr_v1 {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
+#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
+ uint8_t flags;
+#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */
+#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
+#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */
+#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
+#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
+ uint8_t gso_type;
+ __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
+ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
+ __virtio16 csum_start; /* Position to start checksumming from */
+ __virtio16 csum_offset; /* Offset after that to place checksum */
+ __virtio16 num_buffers; /* Number of merged rx buffers */
+};
+
+#ifndef VIRTIO_NET_NO_LEGACY
+/* This header comes first in the scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
+ * be the first element of the scatter-gather list. If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr {
+ /* See VIRTIO_NET_HDR_F_* */
+ uint8_t flags;
+ /* See VIRTIO_NET_HDR_GSO_* */
+ uint8_t gso_type;
+ __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
+ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
+ __virtio16 csum_start; /* Position to start checksumming from */
+ __virtio16 csum_offset; /* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+ struct virtio_net_hdr hdr;
+ __virtio16 num_buffers; /* Number of merged rx buffers */
+};
+#endif /* ...VIRTIO_NET_NO_LEGACY */
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry. Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+ uint8_t class;
+ uint8_t cmd;
+} QEMU_PACKED;
+
+typedef uint8_t virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK 0
+#define VIRTIO_NET_ERR 1
+
+/*
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable. Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
+ */
+#define VIRTIO_NET_CTRL_RX 0
+ #define VIRTIO_NET_CTRL_RX_PROMISC 0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI 2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI 3
+ #define VIRTIO_NET_CTRL_RX_NOUNI 4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST 5
+
+/*
+ * Control the MAC
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite. Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists. Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ *
+ * The ADDR_SET command requests one out scatterlist, it contains a
+ * 6 bytes MAC address. This functionality is present if the
+ * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
+ */
+struct virtio_net_ctrl_mac {
+ __virtio32 entries;
+ uint8_t macs[][ETH_ALEN];
+} QEMU_PACKED;
+
+#define VIRTIO_NET_CTRL_MAC 1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+ #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor. Del is the
+ * opposite of add. Both commands expect an out entry containing a 2
+ * byte VLAN ID. VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN 2
+ #define VIRTIO_NET_CTRL_VLAN_ADD 0
+ #define VIRTIO_NET_CTRL_VLAN_DEL 1
+
+/*
+ * Control link announce acknowledgement
+ *
+ * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
+ * driver has recevied the notification; device would clear the
+ * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
+ * this command.
+ */
+#define VIRTIO_NET_CTRL_ANNOUNCE 3
+ #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
+
+/*
+ * Control Receive Flow Steering
+ *
+ * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
+ * enables Receive Flow Steering, specifying the number of the transmit and
+ * receive queues that will be used. After the command is consumed and acked by
+ * the device, the device will not steer new packets on receive virtqueues
+ * other than specified nor read from transmit virtqueues other than specified.
+ * Accordingly, driver should not transmit new packets on virtqueues other than
+ * specified.
+ */
+struct virtio_net_ctrl_mq {
+ __virtio16 virtqueue_pairs;
+};
+
+#define VIRTIO_NET_CTRL_MQ 4
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
+ #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
+
+/*
+ * Control network offloads
+ *
+ * Reconfigures the network offloads that Guest can handle.
+ *
+ * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
+ *
+ * Command data format matches the feature bit mask exactly.
+ *
+ * See VIRTIO_NET_F_GUEST_* for the list of offloads
+ * that can be enabled/disabled.
+ */
+#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
+#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
+
+#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/qemu/include/standard-headers/linux/virtio_pci.h b/qemu/include/standard-headers/linux/virtio_pci.h
new file mode 100644
index 000000000..9262acd13
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_pci.h
@@ -0,0 +1,199 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include "standard-headers/linux/types.h"
+
+#ifndef VIRTIO_PCI_NO_LEGACY
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES 0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES 4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN 8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM 12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL 14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY 16
+
+/* An 8-bit device status register. */
+#define VIRTIO_PCI_STATUS 18
+
+/* An 8-bit r/o interrupt status register. Reading the value will return the
+ * current contents of the ISR and will also clear it. This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR 19
+
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR 20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR 22
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20)
+/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */
+#define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled)
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION 0
+
+/* How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size. */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
+
+/* The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize again. */
+#define VIRTIO_PCI_VRING_ALIGN 4096
+
+#endif /* VIRTIO_PCI_NO_LEGACY */
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG 0x2
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR 0xffff
+
+#ifndef VIRTIO_PCI_NO_MODERN
+
+/* IDs for different capabilities. Must all exist. */
+
+/* Common configuration */
+#define VIRTIO_PCI_CAP_COMMON_CFG 1
+/* Notifications */
+#define VIRTIO_PCI_CAP_NOTIFY_CFG 2
+/* ISR access */
+#define VIRTIO_PCI_CAP_ISR_CFG 3
+/* Device specific configuration */
+#define VIRTIO_PCI_CAP_DEVICE_CFG 4
+/* PCI configuration access */
+#define VIRTIO_PCI_CAP_PCI_CFG 5
+
+/* This is the PCI capability header: */
+struct virtio_pci_cap {
+ uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */
+ uint8_t cap_next; /* Generic PCI field: next ptr. */
+ uint8_t cap_len; /* Generic PCI field: capability length */
+ uint8_t cfg_type; /* Identifies the structure. */
+ uint8_t bar; /* Where to find it. */
+ uint8_t padding[3]; /* Pad to full dword. */
+ uint32_t offset; /* Offset within bar. */
+ uint32_t length; /* Length of the structure, in bytes. */
+};
+
+struct virtio_pci_notify_cap {
+ struct virtio_pci_cap cap;
+ uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */
+};
+
+/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
+struct virtio_pci_common_cfg {
+ /* About the whole device. */
+ uint32_t device_feature_select; /* read-write */
+ uint32_t device_feature; /* read-only */
+ uint32_t guest_feature_select; /* read-write */
+ uint32_t guest_feature; /* read-write */
+ uint16_t msix_config; /* read-write */
+ uint16_t num_queues; /* read-only */
+ uint8_t device_status; /* read-write */
+ uint8_t config_generation; /* read-only */
+
+ /* About a specific virtqueue. */
+ uint16_t queue_select; /* read-write */
+ uint16_t queue_size; /* read-write, power of 2. */
+ uint16_t queue_msix_vector; /* read-write */
+ uint16_t queue_enable; /* read-write */
+ uint16_t queue_notify_off; /* read-only */
+ uint32_t queue_desc_lo; /* read-write */
+ uint32_t queue_desc_hi; /* read-write */
+ uint32_t queue_avail_lo; /* read-write */
+ uint32_t queue_avail_hi; /* read-write */
+ uint32_t queue_used_lo; /* read-write */
+ uint32_t queue_used_hi; /* read-write */
+};
+
+/* Fields in VIRTIO_PCI_CAP_PCI_CFG: */
+struct virtio_pci_cfg_cap {
+ struct virtio_pci_cap cap;
+ uint8_t pci_cfg_data[4]; /* Data for BAR access. */
+};
+
+/* Macro versions of offsets for the Old Timers! */
+#define VIRTIO_PCI_CAP_VNDR 0
+#define VIRTIO_PCI_CAP_NEXT 1
+#define VIRTIO_PCI_CAP_LEN 2
+#define VIRTIO_PCI_CAP_CFG_TYPE 3
+#define VIRTIO_PCI_CAP_BAR 4
+#define VIRTIO_PCI_CAP_OFFSET 8
+#define VIRTIO_PCI_CAP_LENGTH 12
+
+#define VIRTIO_PCI_NOTIFY_CAP_MULT 16
+
+#define VIRTIO_PCI_COMMON_DFSELECT 0
+#define VIRTIO_PCI_COMMON_DF 4
+#define VIRTIO_PCI_COMMON_GFSELECT 8
+#define VIRTIO_PCI_COMMON_GF 12
+#define VIRTIO_PCI_COMMON_MSIX 16
+#define VIRTIO_PCI_COMMON_NUMQ 18
+#define VIRTIO_PCI_COMMON_STATUS 20
+#define VIRTIO_PCI_COMMON_CFGGENERATION 21
+#define VIRTIO_PCI_COMMON_Q_SELECT 22
+#define VIRTIO_PCI_COMMON_Q_SIZE 24
+#define VIRTIO_PCI_COMMON_Q_MSIX 26
+#define VIRTIO_PCI_COMMON_Q_ENABLE 28
+#define VIRTIO_PCI_COMMON_Q_NOFF 30
+#define VIRTIO_PCI_COMMON_Q_DESCLO 32
+#define VIRTIO_PCI_COMMON_Q_DESCHI 36
+#define VIRTIO_PCI_COMMON_Q_AVAILLO 40
+#define VIRTIO_PCI_COMMON_Q_AVAILHI 44
+#define VIRTIO_PCI_COMMON_Q_USEDLO 48
+#define VIRTIO_PCI_COMMON_Q_USEDHI 52
+
+#endif /* VIRTIO_PCI_NO_MODERN */
+
+#endif
diff --git a/qemu/include/standard-headers/linux/virtio_ring.h b/qemu/include/standard-headers/linux/virtio_ring.h
new file mode 100644
index 000000000..6fe276faf
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_ring.h
@@ -0,0 +1,171 @@
+#ifndef _LINUX_VIRTIO_RING_H
+#define _LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon. Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include "standard-headers/linux/types.h"
+#include "standard-headers/linux/virtio_types.h"
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT 1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE 2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT 4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer. It's unreliable, so it's simply an optimization. Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY 1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer. It's unreliable, so it's simply an
+ * optimization. */
+#define VRING_AVAIL_F_NO_INTERRUPT 1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC 28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX 29
+
+/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
+struct vring_desc {
+ /* Address (guest-physical). */
+ __virtio64 addr;
+ /* Length. */
+ __virtio32 len;
+ /* The flags as indicated above. */
+ __virtio16 flags;
+ /* We chain unused descriptors via this, too */
+ __virtio16 next;
+};
+
+struct vring_avail {
+ __virtio16 flags;
+ __virtio16 idx;
+ __virtio16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+ /* Index of start of used descriptor chain. */
+ __virtio32 id;
+ /* Total length of the descriptor chain which was used (written to) */
+ __virtio32 len;
+};
+
+struct vring_used {
+ __virtio16 flags;
+ __virtio16 idx;
+ struct vring_used_elem ring[];
+};
+
+struct vring {
+ unsigned int num;
+
+ struct vring_desc *desc;
+
+ struct vring_avail *avail;
+
+ struct vring_used *used;
+};
+
+/* Alignment requirements for vring elements.
+ * When using pre-virtio 1.0 layout, these fall out naturally.
+ */
+#define VRING_AVAIL_ALIGN_SIZE 2
+#define VRING_USED_ALIGN_SIZE 4
+#define VRING_DESC_ALIGN_SIZE 16
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this. We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ * // The actual descriptors (16 bytes each)
+ * struct vring_desc desc[num];
+ *
+ * // A ring of available descriptor heads with free-running index.
+ * __virtio16 avail_flags;
+ * __virtio16 avail_idx;
+ * __virtio16 available[num];
+ * __virtio16 used_event_idx;
+ *
+ * // Padding to the next align boundary.
+ * char pad[];
+ *
+ * // A ring of used descriptor heads with free-running index.
+ * __virtio16 used_flags;
+ * __virtio16 used_idx;
+ * struct vring_used_elem used[num];
+ * __virtio16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__virtio16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+ unsigned long align)
+{
+ vr->num = num;
+ vr->desc = p;
+ vr->avail = p + num*sizeof(struct vring_desc);
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__virtio16)
+ + align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+ return ((sizeof(struct vring_desc) * num + sizeof(__virtio16) * (3 + num)
+ + align - 1) & ~(align - 1))
+ + sizeof(__virtio16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other side, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(uint16_t event_idx, uint16_t new_idx, uint16_t old)
+{
+ /* Note: Xen has similar logic for notification hold-off
+ * in include/xen/interface/io/ring.h with req_event and req_prod
+ * corresponding to event_idx + 1 and new_idx respectively.
+ * Note also that req_event and req_prod in Xen start at 1,
+ * event indexes in virtio start at 0. */
+ return (uint16_t)(new_idx - event_idx - 1) < (uint16_t)(new_idx - old);
+}
+
+#endif /* _LINUX_VIRTIO_RING_H */
diff --git a/qemu/include/standard-headers/linux/virtio_rng.h b/qemu/include/standard-headers/linux/virtio_rng.h
new file mode 100644
index 000000000..60fc798bd
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_config.h"
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/qemu/include/standard-headers/linux/virtio_scsi.h b/qemu/include/standard-headers/linux/virtio_scsi.h
new file mode 100644
index 000000000..ab66166b6
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_scsi.h
@@ -0,0 +1,172 @@
+/*
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_SCSI_H
+#define _LINUX_VIRTIO_SCSI_H
+
+#include "standard-headers/linux/virtio_types.h"
+
+/* Default values of the CDB and sense data size configuration fields */
+#define VIRTIO_SCSI_CDB_DEFAULT_SIZE 32
+#define VIRTIO_SCSI_SENSE_DEFAULT_SIZE 96
+
+#ifndef VIRTIO_SCSI_CDB_SIZE
+#define VIRTIO_SCSI_CDB_SIZE VIRTIO_SCSI_CDB_DEFAULT_SIZE
+#endif
+#ifndef VIRTIO_SCSI_SENSE_SIZE
+#define VIRTIO_SCSI_SENSE_SIZE VIRTIO_SCSI_SENSE_DEFAULT_SIZE
+#endif
+
+/* SCSI command request, followed by data-out */
+struct virtio_scsi_cmd_req {
+ uint8_t lun[8]; /* Logical Unit Number */
+ __virtio64 tag; /* Command identifier */
+ uint8_t task_attr; /* Task attribute */
+ uint8_t prio; /* SAM command priority field */
+ uint8_t crn;
+ uint8_t cdb[VIRTIO_SCSI_CDB_SIZE];
+} QEMU_PACKED;
+
+/* SCSI command request, followed by protection information */
+struct virtio_scsi_cmd_req_pi {
+ uint8_t lun[8]; /* Logical Unit Number */
+ __virtio64 tag; /* Command identifier */
+ uint8_t task_attr; /* Task attribute */
+ uint8_t prio; /* SAM command priority field */
+ uint8_t crn;
+ __virtio32 pi_bytesout; /* DataOUT PI Number of bytes */
+ __virtio32 pi_bytesin; /* DataIN PI Number of bytes */
+ uint8_t cdb[VIRTIO_SCSI_CDB_SIZE];
+} QEMU_PACKED;
+
+/* Response, followed by sense data and data-in */
+struct virtio_scsi_cmd_resp {
+ __virtio32 sense_len; /* Sense data length */
+ __virtio32 resid; /* Residual bytes in data buffer */
+ __virtio16 status_qualifier; /* Status qualifier */
+ uint8_t status; /* Command completion status */
+ uint8_t response; /* Response values */
+ uint8_t sense[VIRTIO_SCSI_SENSE_SIZE];
+} QEMU_PACKED;
+
+/* Task Management Request */
+struct virtio_scsi_ctrl_tmf_req {
+ __virtio32 type;
+ __virtio32 subtype;
+ uint8_t lun[8];
+ __virtio64 tag;
+} QEMU_PACKED;
+
+struct virtio_scsi_ctrl_tmf_resp {
+ uint8_t response;
+} QEMU_PACKED;
+
+/* Asynchronous notification query/subscription */
+struct virtio_scsi_ctrl_an_req {
+ __virtio32 type;
+ uint8_t lun[8];
+ __virtio32 event_requested;
+} QEMU_PACKED;
+
+struct virtio_scsi_ctrl_an_resp {
+ __virtio32 event_actual;
+ uint8_t response;
+} QEMU_PACKED;
+
+struct virtio_scsi_event {
+ __virtio32 event;
+ uint8_t lun[8];
+ __virtio32 reason;
+} QEMU_PACKED;
+
+struct virtio_scsi_config {
+ uint32_t num_queues;
+ uint32_t seg_max;
+ uint32_t max_sectors;
+ uint32_t cmd_per_lun;
+ uint32_t event_info_size;
+ uint32_t sense_size;
+ uint32_t cdb_size;
+ uint16_t max_channel;
+ uint16_t max_target;
+ uint32_t max_lun;
+} QEMU_PACKED;
+
+/* Feature Bits */
+#define VIRTIO_SCSI_F_INOUT 0
+#define VIRTIO_SCSI_F_HOTPLUG 1
+#define VIRTIO_SCSI_F_CHANGE 2
+#define VIRTIO_SCSI_F_T10_PI 3
+
+/* Response codes */
+#define VIRTIO_SCSI_S_OK 0
+#define VIRTIO_SCSI_S_OVERRUN 1
+#define VIRTIO_SCSI_S_ABORTED 2
+#define VIRTIO_SCSI_S_BAD_TARGET 3
+#define VIRTIO_SCSI_S_RESET 4
+#define VIRTIO_SCSI_S_BUSY 5
+#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
+#define VIRTIO_SCSI_S_TARGET_FAILURE 7
+#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
+#define VIRTIO_SCSI_S_FAILURE 9
+#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
+#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
+#define VIRTIO_SCSI_S_INCORRECT_LUN 12
+
+/* Controlq type codes. */
+#define VIRTIO_SCSI_T_TMF 0
+#define VIRTIO_SCSI_T_AN_QUERY 1
+#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
+
+/* Valid TMF subtypes. */
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
+#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
+#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
+#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
+#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
+
+/* Events. */
+#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
+#define VIRTIO_SCSI_T_NO_EVENT 0
+#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
+#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
+#define VIRTIO_SCSI_T_PARAM_CHANGE 3
+
+/* Reasons of transport reset event */
+#define VIRTIO_SCSI_EVT_RESET_HARD 0
+#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
+#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
+
+#define VIRTIO_SCSI_S_SIMPLE 0
+#define VIRTIO_SCSI_S_ORDERED 1
+#define VIRTIO_SCSI_S_HEAD 2
+#define VIRTIO_SCSI_S_ACA 3
+
+
+#endif /* _LINUX_VIRTIO_SCSI_H */
diff --git a/qemu/include/standard-headers/linux/virtio_types.h b/qemu/include/standard-headers/linux/virtio_types.h
new file mode 100644
index 000000000..fd0d3511f
--- /dev/null
+++ b/qemu/include/standard-headers/linux/virtio_types.h
@@ -0,0 +1,46 @@
+#ifndef _LINUX_VIRTIO_TYPES_H
+#define _LINUX_VIRTIO_TYPES_H
+/* Type definitions for virtio implementations.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) 2014 Red Hat, Inc.
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ */
+#include "standard-headers/linux/types.h"
+
+/*
+ * __virtio{16,32,64} have the following meaning:
+ * - __u{16,32,64} for virtio devices in legacy mode, accessed in native endian
+ * - __le{16,32,64} for standard-compliant virtio devices
+ */
+
+typedef uint16_t __virtio16;
+typedef uint32_t __virtio32;
+typedef uint64_t __virtio64;
+
+#endif /* _LINUX_VIRTIO_TYPES_H */