diff options
Diffstat (limited to 'qemu/include/hw/intc')
| -rw-r--r-- | qemu/include/hw/intc/arm_gic_common.h | 16 | ||||
| -rw-r--r-- | qemu/include/hw/intc/arm_gicv3_common.h | 68 | ||||
| -rw-r--r-- | qemu/include/hw/intc/aspeed_vic.h | 48 | ||||
| -rw-r--r-- | qemu/include/hw/intc/bcm2835_ic.h | 33 | ||||
| -rw-r--r-- | qemu/include/hw/intc/bcm2836_control.h | 51 | ||||
| -rw-r--r-- | qemu/include/hw/intc/imx_avic.h | 55 |
6 files changed, 261 insertions, 10 deletions
diff --git a/qemu/include/hw/intc/arm_gic_common.h b/qemu/include/hw/intc/arm_gic_common.h index 899db3d7a..f4c349a2e 100644 --- a/qemu/include/hw/intc/arm_gic_common.h +++ b/qemu/include/hw/intc/arm_gic_common.h @@ -68,7 +68,6 @@ typedef struct GICState { uint8_t irq_target[GIC_MAXIRQ]; uint8_t priority1[GIC_INTERNAL][GIC_NCPU]; uint8_t priority2[GIC_MAXIRQ - GIC_INTERNAL]; - uint16_t last_active[GIC_MAXIRQ][GIC_NCPU]; /* For each SGI on the target CPU, we store 8 bits * indicating which source CPUs have made this SGI * pending on the target CPU. These correspond to @@ -78,7 +77,6 @@ typedef struct GICState { uint8_t sgi_pending[GIC_NR_SGIS][GIC_NCPU]; uint16_t priority_mask[GIC_NCPU]; - uint16_t running_irq[GIC_NCPU]; uint16_t running_priority[GIC_NCPU]; uint16_t current_pending[GIC_NCPU]; @@ -96,16 +94,9 @@ typedef struct GICState { * If an interrupt for preemption level X is active, then * APRn[X mod 32] == 0b1, where n = X / 32 * otherwise the bit is clear. - * - * TODO: rewrite the interrupt acknowlege/complete routines to use - * the APR registers to track the necessary information to update - * s->running_priority[] on interrupt completion (ie completely remove - * last_active[][] and running_irq[]). This will be necessary if we ever - * want to support TCG<->KVM migration, or TCG guests which can - * do power management involving powering down and restarting - * the GIC. */ uint32_t apr[GIC_NR_APRS][GIC_NCPU]; + uint32_t nsapr[GIC_NR_APRS][GIC_NCPU]; uint32_t num_cpu; @@ -118,7 +109,9 @@ typedef struct GICState { uint32_t num_irq; uint32_t revision; bool security_extn; + bool irq_reset_nonsecure; /* configure IRQs as group 1 (NS) on reset? */ int dev_fd; /* kvm device fd if backed by kvm vgic support */ + Error *migration_blocker; } GICState; #define TYPE_ARM_GIC_COMMON "arm_gic_common" @@ -138,4 +131,7 @@ typedef struct ARMGICCommonClass { void (*post_load)(GICState *s); } ARMGICCommonClass; +void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, + const MemoryRegionOps *ops); + #endif diff --git a/qemu/include/hw/intc/arm_gicv3_common.h b/qemu/include/hw/intc/arm_gicv3_common.h new file mode 100644 index 000000000..c2fd8da4e --- /dev/null +++ b/qemu/include/hw/intc/arm_gicv3_common.h @@ -0,0 +1,68 @@ +/* + * ARM GIC support + * + * Copyright (c) 2012 Linaro Limited + * Copyright (c) 2015 Huawei. + * Written by Peter Maydell + * Extended to 64 cores by Shlomo Pongratz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_ARM_GICV3_COMMON_H +#define HW_ARM_GICV3_COMMON_H + +#include "hw/sysbus.h" +#include "hw/intc/arm_gic_common.h" + +typedef struct GICv3State { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + qemu_irq *parent_irq; + qemu_irq *parent_fiq; + + MemoryRegion iomem_dist; /* Distributor */ + MemoryRegion iomem_redist; /* Redistributors */ + + uint32_t num_cpu; + uint32_t num_irq; + uint32_t revision; + bool security_extn; + + int dev_fd; /* kvm device fd if backed by kvm vgic support */ +} GICv3State; + +#define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" +#define ARM_GICV3_COMMON(obj) \ + OBJECT_CHECK(GICv3State, (obj), TYPE_ARM_GICV3_COMMON) +#define ARM_GICV3_COMMON_CLASS(klass) \ + OBJECT_CLASS_CHECK(ARMGICv3CommonClass, (klass), TYPE_ARM_GICV3_COMMON) +#define ARM_GICV3_COMMON_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ARMGICv3CommonClass, (obj), TYPE_ARM_GICV3_COMMON) + +typedef struct ARMGICv3CommonClass { + /*< private >*/ + SysBusDeviceClass parent_class; + /*< public >*/ + + void (*pre_save)(GICv3State *s); + void (*post_load)(GICv3State *s); +} ARMGICv3CommonClass; + +void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, + const MemoryRegionOps *ops); + +#endif diff --git a/qemu/include/hw/intc/aspeed_vic.h b/qemu/include/hw/intc/aspeed_vic.h new file mode 100644 index 000000000..107ff17c3 --- /dev/null +++ b/qemu/include/hw/intc/aspeed_vic.h @@ -0,0 +1,48 @@ +/* + * ASPEED Interrupt Controller (New) + * + * Andrew Jeffery <andrew@aj.id.au> + * + * Copyright 2016 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + * + * Need to add SVIC and CVIC support + */ +#ifndef ASPEED_VIC_H +#define ASPEED_VIC_H + +#include "hw/sysbus.h" + +#define TYPE_ASPEED_VIC "aspeed.vic" +#define ASPEED_VIC(obj) OBJECT_CHECK(AspeedVICState, (obj), TYPE_ASPEED_VIC) + +#define ASPEED_VIC_NR_IRQS 51 + +typedef struct AspeedVICState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + qemu_irq irq; + qemu_irq fiq; + + uint64_t level; + uint64_t raw; + uint64_t select; + uint64_t enable; + uint64_t trigger; + + /* 0=edge, 1=level */ + uint64_t sense; + + /* 0=single-edge, 1=dual-edge */ + uint64_t dual_edge; + + /* 0=low-sensitive/falling-edge, 1=high-sensitive/rising-edge */ + uint64_t event; +} AspeedVICState; + +#endif /* ASPEED_VIC_H */ diff --git a/qemu/include/hw/intc/bcm2835_ic.h b/qemu/include/hw/intc/bcm2835_ic.h new file mode 100644 index 000000000..fb75fa006 --- /dev/null +++ b/qemu/include/hw/intc/bcm2835_ic.h @@ -0,0 +1,33 @@ +/* + * Raspberry Pi emulation (c) 2012 Gregory Estrade + * This code is licensed under the GNU GPLv2 and later. + */ + +#ifndef BCM2835_IC_H +#define BCM2835_IC_H + +#include "hw/sysbus.h" + +#define TYPE_BCM2835_IC "bcm2835-ic" +#define BCM2835_IC(obj) OBJECT_CHECK(BCM2835ICState, (obj), TYPE_BCM2835_IC) + +#define BCM2835_IC_GPU_IRQ "gpu-irq" +#define BCM2835_IC_ARM_IRQ "arm-irq" + +typedef struct BCM2835ICState { + /*< private >*/ + SysBusDevice busdev; + /*< public >*/ + + MemoryRegion iomem; + qemu_irq irq; + qemu_irq fiq; + + /* 64 GPU IRQs + 8 ARM IRQs = 72 total (GPU first) */ + uint64_t gpu_irq_level, gpu_irq_enable; + uint8_t arm_irq_level, arm_irq_enable; + bool fiq_enable; + uint8_t fiq_select; +} BCM2835ICState; + +#endif diff --git a/qemu/include/hw/intc/bcm2836_control.h b/qemu/include/hw/intc/bcm2836_control.h new file mode 100644 index 000000000..613f3c418 --- /dev/null +++ b/qemu/include/hw/intc/bcm2836_control.h @@ -0,0 +1,51 @@ +/* + * Raspberry Pi emulation (c) 2012 Gregory Estrade + * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous + * + * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft + * Written by Andrew Baumann + * + * This code is licensed under the GNU GPLv2 and later. + */ + +#ifndef BCM2836_CONTROL_H +#define BCM2836_CONTROL_H + +#include "hw/sysbus.h" + +/* 4 mailboxes per core, for 16 total */ +#define BCM2836_NCORES 4 +#define BCM2836_MBPERCORE 4 + +#define TYPE_BCM2836_CONTROL "bcm2836-control" +#define BCM2836_CONTROL(obj) \ + OBJECT_CHECK(BCM2836ControlState, (obj), TYPE_BCM2836_CONTROL) + +typedef struct BCM2836ControlState { + /*< private >*/ + SysBusDevice busdev; + /*< public >*/ + MemoryRegion iomem; + + /* mailbox state */ + uint32_t mailboxes[BCM2836_NCORES * BCM2836_MBPERCORE]; + + /* interrupt routing/control registers */ + uint8_t route_gpu_irq, route_gpu_fiq; + uint32_t timercontrol[BCM2836_NCORES]; + uint32_t mailboxcontrol[BCM2836_NCORES]; + + /* interrupt status regs (derived from input pins; not visible to user) */ + bool gpu_irq, gpu_fiq; + uint8_t timerirqs[BCM2836_NCORES]; + + /* interrupt source registers, post-routing (also input-derived; visible) */ + uint32_t irqsrc[BCM2836_NCORES]; + uint32_t fiqsrc[BCM2836_NCORES]; + + /* outputs to CPU cores */ + qemu_irq irq[BCM2836_NCORES]; + qemu_irq fiq[BCM2836_NCORES]; +} BCM2836ControlState; + +#endif diff --git a/qemu/include/hw/intc/imx_avic.h b/qemu/include/hw/intc/imx_avic.h new file mode 100644 index 000000000..1b8076901 --- /dev/null +++ b/qemu/include/hw/intc/imx_avic.h @@ -0,0 +1,55 @@ +/* + * i.MX31 Vectored Interrupt Controller + * + * Note this is NOT the PL192 provided by ARM, but + * a custom implementation by Freescale. + * + * Copyright (c) 2008 OKL + * Copyright (c) 2011 NICTA Pty Ltd + * Originally written by Hans Jiang + * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + * + * TODO: implement vectors. + */ +#ifndef IMX_AVIC_H +#define IMX_AVIC_H + +#include "hw/sysbus.h" + +#define TYPE_IMX_AVIC "imx.avic" +#define IMX_AVIC(obj) OBJECT_CHECK(IMXAVICState, (obj), TYPE_IMX_AVIC) + +#define IMX_AVIC_NUM_IRQS 64 + +/* Interrupt Control Bits */ +#define ABFLAG (1<<25) +#define ABFEN (1<<24) +#define NIDIS (1<<22) /* Normal Interrupt disable */ +#define FIDIS (1<<21) /* Fast interrupt disable */ +#define NIAD (1<<20) /* Normal Interrupt Arbiter Rise ARM level */ +#define FIAD (1<<19) /* Fast Interrupt Arbiter Rise ARM level */ +#define NM (1<<18) /* Normal interrupt mode */ + +#define PRIO_PER_WORD (sizeof(uint32_t) * 8 / 4) +#define PRIO_WORDS (IMX_AVIC_NUM_IRQS/PRIO_PER_WORD) + +typedef struct IMXAVICState{ + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + uint64_t pending; + uint64_t enabled; + uint64_t is_fiq; + uint32_t intcntl; + uint32_t intmask; + qemu_irq irq; + qemu_irq fiq; + uint32_t prio[PRIO_WORDS]; /* Priorities are 4-bits each */ +} IMXAVICState; + +#endif /* IMX_AVIC_H */ |