diff options
Diffstat (limited to 'qemu/include/hw/arm')
| -rw-r--r-- | qemu/include/hw/arm/allwinner-a10.h | 4 | ||||
| -rw-r--r-- | qemu/include/hw/arm/arm.h | 32 | ||||
| -rw-r--r-- | qemu/include/hw/arm/ast2400.h | 35 | ||||
| -rw-r--r-- | qemu/include/hw/arm/bcm2835_peripherals.h | 48 | ||||
| -rw-r--r-- | qemu/include/hw/arm/bcm2836.h | 35 | ||||
| -rw-r--r-- | qemu/include/hw/arm/fsl-imx25.h | 249 | ||||
| -rw-r--r-- | qemu/include/hw/arm/fsl-imx31.h | 122 | ||||
| -rw-r--r-- | qemu/include/hw/arm/imx.h | 34 | ||||
| -rw-r--r-- | qemu/include/hw/arm/linux-boot-if.h | 43 | ||||
| -rw-r--r-- | qemu/include/hw/arm/raspi_platform.h | 128 | ||||
| -rw-r--r-- | qemu/include/hw/arm/virt-acpi-build.h | 3 | ||||
| -rw-r--r-- | qemu/include/hw/arm/virt.h | 8 | ||||
| -rw-r--r-- | qemu/include/hw/arm/xlnx-zynqmp.h | 29 |
13 files changed, 732 insertions, 38 deletions
diff --git a/qemu/include/hw/arm/allwinner-a10.h b/qemu/include/hw/arm/allwinner-a10.h index 01a189bcd..6b32a99e2 100644 --- a/qemu/include/hw/arm/allwinner-a10.h +++ b/qemu/include/hw/arm/allwinner-a10.h @@ -7,6 +7,8 @@ #include "hw/timer/allwinner-a10-pit.h" #include "hw/intc/allwinner-a10-pic.h" #include "hw/net/allwinner_emac.h" +#include "hw/ide/pci.h" +#include "hw/ide/ahci.h" #include "sysemu/sysemu.h" #include "exec/address-spaces.h" @@ -16,6 +18,7 @@ #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 #define AW_A10_EMAC_BASE 0x01c0b000 +#define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_SDRAM_BASE 0x40000000 @@ -32,6 +35,7 @@ typedef struct AwA10State { AwA10PITState timer; AwA10PICState intc; AwEmacState emac; + AllwinnerAHCIState sata; } AwA10State; #define ALLWINNER_H_ diff --git a/qemu/include/hw/arm/arm.h b/qemu/include/hw/arm/arm.h index 4dcd4f9b6..b2517f9a4 100644 --- a/qemu/include/hw/arm/arm.h +++ b/qemu/include/hw/arm/arm.h @@ -16,8 +16,15 @@ #include "qemu/notify.h" #include "cpu.h" +typedef enum { + ARM_ENDIANNESS_UNKNOWN = 0, + ARM_ENDIANNESS_LE, + ARM_ENDIANNESS_BE8, + ARM_ENDIANNESS_BE32, +} arm_endianness; + /* armv7m.c */ -qemu_irq *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, +DeviceState *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, const char *kernel_filename, const char *cpu_model); /* @@ -87,6 +94,24 @@ struct arm_boot_info { * -pflash. It also implies that fw_cfg_find() will succeed. */ bool firmware_loaded; + + /* Address at which board specific loader/setup code exists. If enabled, + * this code-blob will run before anything else. It must return to the + * caller via the link register. There is no stack set up. Enabled by + * defining write_board_setup, which is responsible for loading the blob + * to the specified address. + */ + hwaddr board_setup_addr; + void (*write_board_setup)(ARMCPU *cpu, + const struct arm_boot_info *info); + + /* If set, the board specific loader/setup blob will be run from secure + * mode, regardless of secure_boot. The blob becomes responsible for + * changing to non-secure state if implementing a non-secure boot + */ + bool secure_board_setup; + + arm_endianness endianness; }; /** @@ -106,6 +131,11 @@ struct arm_boot_info { */ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info); +/* Write a secure board setup routine with a dummy handler for SMCs */ +void arm_write_secure_board_setup_dummy_smc(ARMCPU *cpu, + const struct arm_boot_info *info, + hwaddr mvbar_addr); + /* Multiplication factor to convert from system clock ticks to qemu timer ticks. */ extern int system_clock_scale; diff --git a/qemu/include/hw/arm/ast2400.h b/qemu/include/hw/arm/ast2400.h new file mode 100644 index 000000000..f16a1ed25 --- /dev/null +++ b/qemu/include/hw/arm/ast2400.h @@ -0,0 +1,35 @@ +/* + * ASPEED AST2400 SoC + * + * Andrew Jeffery <andrew@aj.id.au> + * + * Copyright 2016 IBM Corp. + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + */ + +#ifndef AST2400_H +#define AST2400_H + +#include "hw/arm/arm.h" +#include "hw/intc/aspeed_vic.h" +#include "hw/timer/aspeed_timer.h" + +typedef struct AST2400State { + /*< private >*/ + DeviceState parent; + + /*< public >*/ + ARMCPU *cpu; + MemoryRegion iomem; + AspeedVICState vic; + AspeedTimerCtrlState timerctrl; +} AST2400State; + +#define TYPE_AST2400 "ast2400" +#define AST2400(obj) OBJECT_CHECK(AST2400State, (obj), TYPE_AST2400) + +#define AST2400_SDRAM_BASE 0x40000000 + +#endif /* AST2400_H */ diff --git a/qemu/include/hw/arm/bcm2835_peripherals.h b/qemu/include/hw/arm/bcm2835_peripherals.h new file mode 100644 index 000000000..e12ae3721 --- /dev/null +++ b/qemu/include/hw/arm/bcm2835_peripherals.h @@ -0,0 +1,48 @@ +/* + * Raspberry Pi emulation (c) 2012 Gregory Estrade + * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous + * + * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft + * Written by Andrew Baumann + * + * This code is licensed under the GNU GPLv2 and later. + */ + +#ifndef BCM2835_PERIPHERALS_H +#define BCM2835_PERIPHERALS_H + +#include "qemu-common.h" +#include "exec/address-spaces.h" +#include "hw/sysbus.h" +#include "hw/char/bcm2835_aux.h" +#include "hw/display/bcm2835_fb.h" +#include "hw/dma/bcm2835_dma.h" +#include "hw/intc/bcm2835_ic.h" +#include "hw/misc/bcm2835_property.h" +#include "hw/misc/bcm2835_mbox.h" +#include "hw/sd/sdhci.h" + +#define TYPE_BCM2835_PERIPHERALS "bcm2835-peripherals" +#define BCM2835_PERIPHERALS(obj) \ + OBJECT_CHECK(BCM2835PeripheralState, (obj), TYPE_BCM2835_PERIPHERALS) + +typedef struct BCM2835PeripheralState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + MemoryRegion peri_mr, peri_mr_alias, gpu_bus_mr, mbox_mr; + MemoryRegion ram_alias[4]; + qemu_irq irq, fiq; + + SysBusDevice *uart0; + BCM2835AuxState aux; + BCM2835FBState fb; + BCM2835DMAState dma; + BCM2835ICState ic; + BCM2835PropertyState property; + BCM2835MboxState mboxes; + SDHCIState sdhci; +} BCM2835PeripheralState; + +#endif /* BCM2835_PERIPHERALS_H */ diff --git a/qemu/include/hw/arm/bcm2836.h b/qemu/include/hw/arm/bcm2836.h new file mode 100644 index 000000000..76de1996a --- /dev/null +++ b/qemu/include/hw/arm/bcm2836.h @@ -0,0 +1,35 @@ +/* + * Raspberry Pi emulation (c) 2012 Gregory Estrade + * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous + * + * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft + * Written by Andrew Baumann + * + * This code is licensed under the GNU GPLv2 and later. + */ + +#ifndef BCM2836_H +#define BCM2836_H + +#include "hw/arm/arm.h" +#include "hw/arm/bcm2835_peripherals.h" +#include "hw/intc/bcm2836_control.h" + +#define TYPE_BCM2836 "bcm2836" +#define BCM2836(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2836) + +#define BCM2836_NCPUS 4 + +typedef struct BCM2836State { + /*< private >*/ + DeviceState parent_obj; + /*< public >*/ + + uint32_t enabled_cpus; + + ARMCPU cpus[BCM2836_NCPUS]; + BCM2836ControlState control; + BCM2835PeripheralState peripherals; +} BCM2836State; + +#endif /* BCM2836_H */ diff --git a/qemu/include/hw/arm/fsl-imx25.h b/qemu/include/hw/arm/fsl-imx25.h new file mode 100644 index 000000000..d0e8e9d95 --- /dev/null +++ b/qemu/include/hw/arm/fsl-imx25.h @@ -0,0 +1,249 @@ +/* + * Freescale i.MX25 SoC emulation + * + * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef FSL_IMX25_H +#define FSL_IMX25_H + +#include "hw/arm/arm.h" +#include "hw/intc/imx_avic.h" +#include "hw/misc/imx25_ccm.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/net/imx_fec.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "exec/memory.h" + +#define TYPE_FSL_IMX25 "fsl,imx25" +#define FSL_IMX25(obj) OBJECT_CHECK(FslIMX25State, (obj), TYPE_FSL_IMX25) + +#define FSL_IMX25_NUM_UARTS 5 +#define FSL_IMX25_NUM_GPTS 4 +#define FSL_IMX25_NUM_EPITS 2 +#define FSL_IMX25_NUM_I2CS 3 +#define FSL_IMX25_NUM_GPIOS 4 + +typedef struct FslIMX25State { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu; + IMXAVICState avic; + IMX25CCMState ccm; + IMXSerialState uart[FSL_IMX25_NUM_UARTS]; + IMXGPTState gpt[FSL_IMX25_NUM_GPTS]; + IMXEPITState epit[FSL_IMX25_NUM_EPITS]; + IMXFECState fec; + IMXI2CState i2c[FSL_IMX25_NUM_I2CS]; + IMXGPIOState gpio[FSL_IMX25_NUM_GPIOS]; + MemoryRegion rom[2]; + MemoryRegion iram; + MemoryRegion iram_alias; +} FslIMX25State; + +/** + * i.MX25 memory map + **************************************************************** + * 0x0000_0000 0x0000_3FFF 16 Kbytes ROM (36 Kbytes) + * 0x0000_4000 0x0040_3FFF 4 Mbytes Reserved + * 0x0040_4000 0x0040_8FFF 20 Kbytes ROM (36 Kbytes) + * 0x0040_9000 0x0FFF_FFFF 252 Mbytes (minus 36 Kbytes) Reserved + * 0x1000_0000 0x1FFF_FFFF 256 Mbytes Reserved + * 0x2000_0000 0x2FFF_FFFF 256 Mbytes Reserved + * 0x3000_0000 0x3FFF_FFFF 256 Mbytes Reserved + * 0x4000_0000 0x43EF_FFFF 63 Mbytes Reserved + * 0x43F0_0000 0x43F0_3FFF 16 Kbytes AIPS A control registers + * 0x43F0_4000 0x43F0_7FFF 16 Kbytes ARM926 platform MAX + * 0x43F0_8000 0x43F0_BFFF 16 Kbytes ARM926 platform CLKCTL + * 0x43F0_C000 0x43F0_FFFF 16 Kbytes ARM926 platform ETB registers + * 0x43F1_0000 0x43F1_3FFF 16 Kbytes ARM926 platform ETB memory + * 0x43F1_4000 0x43F1_7FFF 16 Kbytes ARM926 platform AAPE registers + * 0x43F1_8000 0x43F7_FFFF 416 Kbytes Reserved + * 0x43F8_0000 0x43F8_3FFF 16 Kbytes I2C-1 + * 0x43F8_4000 0x43F8_7FFF 16 Kbytes I2C-3 + * 0x43F8_8000 0x43F8_BFFF 16 Kbytes CAN-1 + * 0x43F8_C000 0x43F8_FFFF 16 Kbytes CAN-2 + * 0x43F9_0000 0x43F9_3FFF 16 Kbytes UART-1 + * 0x43F9_4000 0x43F9_7FFF 16 Kbytes UART-2 + * 0x43F9_8000 0x43F9_BFFF 16 Kbytes I2C-2 + * 0x43F9_C000 0x43F9_FFFF 16 Kbytes 1-Wire + * 0x43FA_0000 0x43FA_3FFF 16 Kbytes ATA (CPU side) + * 0x43FA_4000 0x43FA_7FFF 16 Kbytes CSPI-1 + * 0x43FA_8000 0x43FA_BFFF 16 Kbytes KPP + * 0x43FA_C000 0x43FA_FFFF 16 Kbytes IOMUXC + * 0x43FB_0000 0x43FB_3FFF 16 Kbytes AUDMUX + * 0x43FB_4000 0x43FB_7FFF 16 Kbytes Reserved + * 0x43FB_8000 0x43FB_BFFF 16 Kbytes ECT (IP BUS A) + * 0x43FB_C000 0x43FB_FFFF 16 Kbytes ECT (IP BUS B) + * 0x43FC_0000 0x43FF_FFFF 256 Kbytes Reserved AIPS A off-platform slots + * 0x4400_0000 0x4FFF_FFFF 192 Mbytes Reserved + * 0x5000_0000 0x5000_3FFF 16 Kbytes SPBA base address + * 0x5000_4000 0x5000_7FFF 16 Kbytes CSPI-3 + * 0x5000_8000 0x5000_BFFF 16 Kbytes UART-4 + * 0x5000_C000 0x5000_FFFF 16 Kbytes UART-3 + * 0x5001_0000 0x5001_3FFF 16 Kbytes CSPI-2 + * 0x5001_4000 0x5001_7FFF 16 Kbytes SSI-2 + * 0x5001_C000 0x5001_FFFF 16 Kbytes Reserved + * 0x5002_0000 0x5002_3FFF 16 Kbytes ATA + * 0x5002_4000 0x5002_7FFF 16 Kbytes SIM-1 + * 0x5002_8000 0x5002_BFFF 16 Kbytes SIM-2 + * 0x5002_C000 0x5002_FFFF 16 Kbytes UART-5 + * 0x5003_0000 0x5003_3FFF 16 Kbytes TSC + * 0x5003_4000 0x5003_7FFF 16 Kbytes SSI-1 + * 0x5003_8000 0x5003_BFFF 16 Kbytes FEC + * 0x5003_C000 0x5003_FFFF 16 Kbytes SPBA registers + * 0x5004_0000 0x51FF_FFFF 32 Mbytes (minus 256 Kbytes) + * 0x5200_0000 0x53EF_FFFF 31 Mbytes Reserved + * 0x53F0_0000 0x53F0_3FFF 16 Kbytes AIPS B control registers + * 0x53F0_4000 0x53F7_FFFF 496 Kbytes Reserved + * 0x53F8_0000 0x53F8_3FFF 16 Kbytes CCM + * 0x53F8_4000 0x53F8_7FFF 16 Kbytes GPT-4 + * 0x53F8_8000 0x53F8_BFFF 16 Kbytes GPT-3 + * 0x53F8_C000 0x53F8_FFFF 16 Kbytes GPT-2 + * 0x53F9_0000 0x53F9_3FFF 16 Kbytes GPT-1 + * 0x53F9_4000 0x53F9_7FFF 16 Kbytes EPIT-1 + * 0x53F9_8000 0x53F9_BFFF 16 Kbytes EPIT-2 + * 0x53F9_C000 0x53F9_FFFF 16 Kbytes GPIO-4 + * 0x53FA_0000 0x53FA_3FFF 16 Kbytes PWM-2 + * 0x53FA_4000 0x53FA_7FFF 16 Kbytes GPIO-3 + * 0x53FA_8000 0x53FA_BFFF 16 Kbytes PWM-3 + * 0x53FA_C000 0x53FA_FFFF 16 Kbytes SCC + * 0x53FB_0000 0x53FB_3FFF 16 Kbytes RNGB + * 0x53FB_4000 0x53FB_7FFF 16 Kbytes eSDHC-1 + * 0x53FB_8000 0x53FB_BFFF 16 Kbytes eSDHC-2 + * 0x53FB_C000 0x53FB_FFFF 16 Kbytes LCDC + * 0x53FC_0000 0x53FC_3FFF 16 Kbytes SLCDC + * 0x53FC_4000 0x53FC_7FFF 16 Kbytes Reserved + * 0x53FC_8000 0x53FC_BFFF 16 Kbytes PWM-4 + * 0x53FC_C000 0x53FC_FFFF 16 Kbytes GPIO-1 + * 0x53FD_0000 0x53FD_3FFF 16 Kbytes GPIO-2 + * 0x53FD_4000 0x53FD_7FFF 16 Kbytes SDMA + * 0x53FD_8000 0x53FD_BFFF 16 Kbytes Reserved + * 0x53FD_C000 0x53FD_FFFF 16 Kbytes WDOG + * 0x53FE_0000 0x53FE_3FFF 16 Kbytes PWM-1 + * 0x53FE_4000 0x53FE_7FFF 16 Kbytes Reserved + * 0x53FE_8000 0x53FE_BFFF 16 Kbytes Reserved + * 0x53FE_C000 0x53FE_FFFF 16 Kbytes RTICv3 + * 0x53FF_0000 0x53FF_3FFF 16 Kbytes IIM + * 0x53FF_4000 0x53FF_7FFF 16 Kbytes USB + * 0x53FF_8000 0x53FF_BFFF 16 Kbytes CSI + * 0x53FF_C000 0x53FF_FFFF 16 Kbytes DryIce + * 0x5400_0000 0x5FFF_FFFF 192 Mbytes Reserved (aliased AIPS B slots) + * 0x6000_0000 0x67FF_FFFF 128 Mbytes ARM926 platform ROMPATCH + * 0x6800_0000 0x6FFF_FFFF 128 Mbytes ARM926 platform ASIC + * 0x7000_0000 0x77FF_FFFF 128 Mbytes Reserved + * 0x7800_0000 0x7801_FFFF 128 Kbytes RAM + * 0x7802_0000 0x7FFF_FFFF 128 Mbytes (minus 128 Kbytes) + * 0x8000_0000 0x8FFF_FFFF 256 Mbytes SDRAM bank 0 + * 0x9000_0000 0x9FFF_FFFF 256 Mbytes SDRAM bank 1 + * 0xA000_0000 0xA7FF_FFFF 128 Mbytes WEIM CS0 (flash 128) 1 + * 0xA800_0000 0xAFFF_FFFF 128 Mbytes WEIM CS1 (flash 64) 1 + * 0xB000_0000 0xB1FF_FFFF 32 Mbytes WEIM CS2 (SRAM) + * 0xB200_0000 0xB3FF_FFFF 32 Mbytes WEIM CS3 (SRAM) + * 0xB400_0000 0xB5FF_FFFF 32 Mbytes WEIM CS4 + * 0xB600_0000 0xB7FF_FFFF 32 Mbytes Reserved + * 0xB800_0000 0xB800_0FFF 4 Kbytes Reserved + * 0xB800_1000 0xB800_1FFF 4 Kbytes SDRAM control registers + * 0xB800_2000 0xB800_2FFF 4 Kbytes WEIM control registers + * 0xB800_3000 0xB800_3FFF 4 Kbytes M3IF control registers + * 0xB800_4000 0xB800_4FFF 4 Kbytes EMI control registers + * 0xB800_5000 0xBAFF_FFFF 32 Mbytes (minus 20 Kbytes) + * 0xBB00_0000 0xBB00_0FFF 4 Kbytes NAND flash main area buffer + * 0xBB00_1000 0xBB00_11FF 512 B NAND flash spare area buffer + * 0xBB00_1200 0xBB00_1DFF 3 Kbytes Reserved + * 0xBB00_1E00 0xBB00_1FFF 512 B NAND flash control regisers + * 0xBB01_2000 0xBFFF_FFFF 96 Mbytes (minus 8 Kbytes) Reserved + * 0xC000_0000 0xFFFF_FFFF 1024 Mbytes Reserved + */ + +#define FSL_IMX25_ROM0_ADDR 0x00000000 +#define FSL_IMX25_ROM0_SIZE 0x4000 +#define FSL_IMX25_ROM1_ADDR 0x00404000 +#define FSL_IMX25_ROM1_SIZE 0x4000 +#define FSL_IMX25_I2C1_ADDR 0x43F80000 +#define FSL_IMX25_I2C1_SIZE 0x4000 +#define FSL_IMX25_I2C3_ADDR 0x43F84000 +#define FSL_IMX25_I2C3_SIZE 0x4000 +#define FSL_IMX25_UART1_ADDR 0x43F90000 +#define FSL_IMX25_UART1_SIZE 0x4000 +#define FSL_IMX25_UART2_ADDR 0x43F94000 +#define FSL_IMX25_UART2_SIZE 0x4000 +#define FSL_IMX25_I2C2_ADDR 0x43F98000 +#define FSL_IMX25_I2C2_SIZE 0x4000 +#define FSL_IMX25_UART4_ADDR 0x50008000 +#define FSL_IMX25_UART4_SIZE 0x4000 +#define FSL_IMX25_UART3_ADDR 0x5000C000 +#define FSL_IMX25_UART3_SIZE 0x4000 +#define FSL_IMX25_UART5_ADDR 0x5002C000 +#define FSL_IMX25_UART5_SIZE 0x4000 +#define FSL_IMX25_FEC_ADDR 0x50038000 +#define FSL_IMX25_FEC_SIZE 0x4000 +#define FSL_IMX25_CCM_ADDR 0x53F80000 +#define FSL_IMX25_CCM_SIZE 0x4000 +#define FSL_IMX25_GPT4_ADDR 0x53F84000 +#define FSL_IMX25_GPT4_SIZE 0x4000 +#define FSL_IMX25_GPT3_ADDR 0x53F88000 +#define FSL_IMX25_GPT3_SIZE 0x4000 +#define FSL_IMX25_GPT2_ADDR 0x53F8C000 +#define FSL_IMX25_GPT2_SIZE 0x4000 +#define FSL_IMX25_GPT1_ADDR 0x53F90000 +#define FSL_IMX25_GPT1_SIZE 0x4000 +#define FSL_IMX25_EPIT1_ADDR 0x53F94000 +#define FSL_IMX25_EPIT1_SIZE 0x4000 +#define FSL_IMX25_EPIT2_ADDR 0x53F98000 +#define FSL_IMX25_EPIT2_SIZE 0x4000 +#define FSL_IMX25_GPIO4_ADDR 0x53F9C000 +#define FSL_IMX25_GPIO4_SIZE 0x4000 +#define FSL_IMX25_GPIO3_ADDR 0x53FA4000 +#define FSL_IMX25_GPIO3_SIZE 0x4000 +#define FSL_IMX25_GPIO1_ADDR 0x53FCC000 +#define FSL_IMX25_GPIO1_SIZE 0x4000 +#define FSL_IMX25_GPIO2_ADDR 0x53FD0000 +#define FSL_IMX25_GPIO2_SIZE 0x4000 +#define FSL_IMX25_AVIC_ADDR 0x68000000 +#define FSL_IMX25_AVIC_SIZE 0x4000 +#define FSL_IMX25_IRAM_ADDR 0x78000000 +#define FSL_IMX25_IRAM_SIZE 0x20000 +#define FSL_IMX25_IRAM_ALIAS_ADDR 0x78020000 +#define FSL_IMX25_IRAM_ALIAS_SIZE 0x7FE0000 +#define FSL_IMX25_SDRAM0_ADDR 0x80000000 +#define FSL_IMX25_SDRAM0_SIZE 0x10000000 +#define FSL_IMX25_SDRAM1_ADDR 0x90000000 +#define FSL_IMX25_SDRAM1_SIZE 0x10000000 + +#define FSL_IMX25_UART1_IRQ 45 +#define FSL_IMX25_UART2_IRQ 32 +#define FSL_IMX25_UART3_IRQ 18 +#define FSL_IMX25_UART4_IRQ 5 +#define FSL_IMX25_UART5_IRQ 40 +#define FSL_IMX25_GPT1_IRQ 54 +#define FSL_IMX25_GPT2_IRQ 53 +#define FSL_IMX25_GPT3_IRQ 29 +#define FSL_IMX25_GPT4_IRQ 1 +#define FSL_IMX25_EPIT1_IRQ 28 +#define FSL_IMX25_EPIT2_IRQ 27 +#define FSL_IMX25_FEC_IRQ 57 +#define FSL_IMX25_I2C1_IRQ 3 +#define FSL_IMX25_I2C2_IRQ 4 +#define FSL_IMX25_I2C3_IRQ 10 +#define FSL_IMX25_GPIO1_IRQ 52 +#define FSL_IMX25_GPIO2_IRQ 51 +#define FSL_IMX25_GPIO3_IRQ 16 +#define FSL_IMX25_GPIO4_IRQ 23 + +#endif /* FSL_IMX25_H */ diff --git a/qemu/include/hw/arm/fsl-imx31.h b/qemu/include/hw/arm/fsl-imx31.h new file mode 100644 index 000000000..d408abbba --- /dev/null +++ b/qemu/include/hw/arm/fsl-imx31.h @@ -0,0 +1,122 @@ +/* + * Freescale i.MX31 SoC emulation + * + * Copyright (C) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef FSL_IMX31_H +#define FSL_IMX31_H + +#include "hw/arm/arm.h" +#include "hw/intc/imx_avic.h" +#include "hw/misc/imx31_ccm.h" +#include "hw/char/imx_serial.h" +#include "hw/timer/imx_gpt.h" +#include "hw/timer/imx_epit.h" +#include "hw/i2c/imx_i2c.h" +#include "hw/gpio/imx_gpio.h" +#include "exec/memory.h" + +#define TYPE_FSL_IMX31 "fsl,imx31" +#define FSL_IMX31(obj) OBJECT_CHECK(FslIMX31State, (obj), TYPE_FSL_IMX31) + +#define FSL_IMX31_NUM_UARTS 2 +#define FSL_IMX31_NUM_EPITS 2 +#define FSL_IMX31_NUM_I2CS 3 +#define FSL_IMX31_NUM_GPIOS 3 + +typedef struct FslIMX31State { + /*< private >*/ + DeviceState parent_obj; + + /*< public >*/ + ARMCPU cpu; + IMXAVICState avic; + IMX31CCMState ccm; + IMXSerialState uart[FSL_IMX31_NUM_UARTS]; + IMXGPTState gpt; + IMXEPITState epit[FSL_IMX31_NUM_EPITS]; + IMXI2CState i2c[FSL_IMX31_NUM_I2CS]; + IMXGPIOState gpio[FSL_IMX31_NUM_GPIOS]; + MemoryRegion secure_rom; + MemoryRegion rom; + MemoryRegion iram; + MemoryRegion iram_alias; +} FslIMX31State; + +#define FSL_IMX31_SECURE_ROM_ADDR 0x00000000 +#define FSL_IMX31_SECURE_ROM_SIZE 0x4000 +#define FSL_IMX31_ROM_ADDR 0x00404000 +#define FSL_IMX31_ROM_SIZE 0x4000 +#define FSL_IMX31_IRAM_ALIAS_ADDR 0x10000000 +#define FSL_IMX31_IRAM_ALIAS_SIZE 0xFFC0000 +#define FSL_IMX31_IRAM_ADDR 0x1FFFC000 +#define FSL_IMX31_IRAM_SIZE 0x4000 +#define FSL_IMX31_I2C1_ADDR 0x43F80000 +#define FSL_IMX31_I2C1_SIZE 0x4000 +#define FSL_IMX31_I2C3_ADDR 0x43F84000 +#define FSL_IMX31_I2C3_SIZE 0x4000 +#define FSL_IMX31_UART1_ADDR 0x43F90000 +#define FSL_IMX31_UART1_SIZE 0x4000 +#define FSL_IMX31_UART2_ADDR 0x43F94000 +#define FSL_IMX31_UART2_SIZE 0x4000 +#define FSL_IMX31_I2C2_ADDR 0x43F98000 +#define FSL_IMX31_I2C2_SIZE 0x4000 +#define FSL_IMX31_CCM_ADDR 0x53F80000 +#define FSL_IMX31_CCM_SIZE 0x4000 +#define FSL_IMX31_GPT_ADDR 0x53F90000 +#define FSL_IMX31_GPT_SIZE 0x4000 +#define FSL_IMX31_EPIT1_ADDR 0x53F94000 +#define FSL_IMX31_EPIT1_SIZE 0x4000 +#define FSL_IMX31_EPIT2_ADDR 0x53F98000 +#define FSL_IMX31_EPIT2_SIZE 0x4000 +#define FSL_IMX31_GPIO3_ADDR 0x53FA4000 +#define FSL_IMX31_GPIO3_SIZE 0x4000 +#define FSL_IMX31_GPIO1_ADDR 0x53FCC000 +#define FSL_IMX31_GPIO1_SIZE 0x4000 +#define FSL_IMX31_GPIO2_ADDR 0x53FD0000 +#define FSL_IMX31_GPIO2_SIZE 0x4000 +#define FSL_IMX31_AVIC_ADDR 0x68000000 +#define FSL_IMX31_AVIC_SIZE 0x100 +#define FSL_IMX31_SDRAM0_ADDR 0x80000000 +#define FSL_IMX31_SDRAM0_SIZE 0x10000000 +#define FSL_IMX31_SDRAM1_ADDR 0x90000000 +#define FSL_IMX31_SDRAM1_SIZE 0x10000000 +#define FSL_IMX31_FLASH0_ADDR 0xA0000000 +#define FSL_IMX31_FLASH0_SIZE 0x8000000 +#define FSL_IMX31_FLASH1_ADDR 0xA8000000 +#define FSL_IMX31_FLASH1_SIZE 0x8000000 +#define FSL_IMX31_CS2_ADDR 0xB0000000 +#define FSL_IMX31_CS2_SIZE 0x2000000 +#define FSL_IMX31_CS3_ADDR 0xB2000000 +#define FSL_IMX31_CS3_SIZE 0x2000000 +#define FSL_IMX31_CS4_ADDR 0xB4000000 +#define FSL_IMX31_CS4_SIZE 0x2000000 +#define FSL_IMX31_CS5_ADDR 0xB6000000 +#define FSL_IMX31_CS5_SIZE 0x2000000 +#define FSL_IMX31_NAND_ADDR 0xB8000000 +#define FSL_IMX31_NAND_SIZE 0x1000 + +#define FSL_IMX31_EPIT2_IRQ 27 +#define FSL_IMX31_EPIT1_IRQ 28 +#define FSL_IMX31_GPT_IRQ 29 +#define FSL_IMX31_UART2_IRQ 32 +#define FSL_IMX31_UART1_IRQ 45 +#define FSL_IMX31_I2C1_IRQ 10 +#define FSL_IMX31_I2C2_IRQ 4 +#define FSL_IMX31_I2C3_IRQ 3 +#define FSL_IMX31_GPIO1_IRQ 52 +#define FSL_IMX31_GPIO2_IRQ 51 +#define FSL_IMX31_GPIO3_IRQ 56 + +#endif /* FSL_IMX31_H */ diff --git a/qemu/include/hw/arm/imx.h b/qemu/include/hw/arm/imx.h deleted file mode 100644 index ea9e09327..000000000 --- a/qemu/include/hw/arm/imx.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * i.MX31 emulation - * - * Copyright (C) 2012 Peter Chubb - * NICTA - * - * This code is released under the GPL, version 2.0 or later - * See the file `../COPYING' for details. - */ - -#ifndef IMX_H -#define IMX_H - -void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq); - -typedef enum { - NOCLK, - MCU, - HSP, - IPG, - CLK_32k -} IMXClk; - -uint32_t imx_clock_frequency(DeviceState *s, IMXClk clock); - -void imx_timerp_create(const hwaddr addr, - qemu_irq irq, - DeviceState *ccm); -void imx_timerg_create(const hwaddr addr, - qemu_irq irq, - DeviceState *ccm); - - -#endif /* IMX_H */ diff --git a/qemu/include/hw/arm/linux-boot-if.h b/qemu/include/hw/arm/linux-boot-if.h new file mode 100644 index 000000000..aba4479a1 --- /dev/null +++ b/qemu/include/hw/arm/linux-boot-if.h @@ -0,0 +1,43 @@ +/* + * hw/arm/linux-boot-if.h : interface for devices which need to behave + * specially for direct boot of an ARM Linux kernel + */ + +#ifndef HW_ARM_LINUX_BOOT_IF_H +#define HW_ARM_LINUX_BOOT_IF_H + +#include "qom/object.h" + +#define TYPE_ARM_LINUX_BOOT_IF "arm-linux-boot-if" +#define ARM_LINUX_BOOT_IF_CLASS(klass) \ + OBJECT_CLASS_CHECK(ARMLinuxBootIfClass, (klass), TYPE_ARM_LINUX_BOOT_IF) +#define ARM_LINUX_BOOT_IF_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ARMLinuxBootIfClass, (obj), TYPE_ARM_LINUX_BOOT_IF) +#define ARM_LINUX_BOOT_IF(obj) \ + INTERFACE_CHECK(ARMLinuxBootIf, (obj), TYPE_ARM_LINUX_BOOT_IF) + +typedef struct ARMLinuxBootIf { + /*< private >*/ + Object parent_obj; +} ARMLinuxBootIf; + +typedef struct ARMLinuxBootIfClass { + /*< private >*/ + InterfaceClass parent_class; + + /*< public >*/ + /** arm_linux_init: configure the device for a direct boot + * of an ARM Linux kernel (so that device reset puts it into + * the state the kernel expects after firmware initialization, + * rather than the true hardware reset state). This callback is + * called once after machine construction is complete (before the + * first system reset). + * + * @obj: the object implementing this interface + * @secure_boot: true if we are booting Secure, false for NonSecure + * (or for a CPU which doesn't support TrustZone) + */ + void (*arm_linux_init)(ARMLinuxBootIf *obj, bool secure_boot); +} ARMLinuxBootIfClass; + +#endif diff --git a/qemu/include/hw/arm/raspi_platform.h b/qemu/include/hw/arm/raspi_platform.h new file mode 100644 index 000000000..6467e88ae --- /dev/null +++ b/qemu/include/hw/arm/raspi_platform.h @@ -0,0 +1,128 @@ +/* + * bcm2708 aka bcm2835/2836 aka Raspberry Pi/Pi2 SoC platform defines + * + * These definitions are derived from those in Raspbian Linux at + * arch/arm/mach-{bcm2708,bcm2709}/include/mach/platform.h + * where they carry the following notice: + * + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MCORE_OFFSET 0x0000 /* Fake frame buffer device + * (the multicore sync block) */ +#define IC0_OFFSET 0x2000 +#define ST_OFFSET 0x3000 /* System Timer */ +#define MPHI_OFFSET 0x6000 /* Message-based Parallel Host Intf. */ +#define DMA_OFFSET 0x7000 /* DMA controller, channels 0-14 */ +#define ARM_OFFSET 0xB000 /* BCM2708 ARM control block */ +#define ARMCTRL_OFFSET (ARM_OFFSET + 0x000) +#define ARMCTRL_IC_OFFSET (ARM_OFFSET + 0x200) /* Interrupt controller */ +#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */ +#define ARMCTRL_0_SBM_OFFSET (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores + * Doorbells & Mailboxes */ +#define PM_OFFSET 0x100000 /* Power Management, Reset controller + * and Watchdog registers */ +#define PCM_CLOCK_OFFSET 0x101098 +#define RNG_OFFSET 0x104000 +#define GPIO_OFFSET 0x200000 +#define UART0_OFFSET 0x201000 +#define MMCI0_OFFSET 0x202000 +#define I2S_OFFSET 0x203000 +#define SPI0_OFFSET 0x204000 +#define BSC0_OFFSET 0x205000 /* BSC0 I2C/TWI */ +#define UART1_OFFSET 0x215000 +#define EMMC_OFFSET 0x300000 +#define SMI_OFFSET 0x600000 +#define BSC1_OFFSET 0x804000 /* BSC1 I2C/TWI */ +#define USB_OFFSET 0x980000 /* DTC_OTG USB controller */ +#define DMA15_OFFSET 0xE05000 /* DMA controller, channel 15 */ + +/* GPU interrupts */ +#define INTERRUPT_TIMER0 0 +#define INTERRUPT_TIMER1 1 +#define INTERRUPT_TIMER2 2 +#define INTERRUPT_TIMER3 3 +#define INTERRUPT_CODEC0 4 +#define INTERRUPT_CODEC1 5 +#define INTERRUPT_CODEC2 6 +#define INTERRUPT_JPEG 7 +#define INTERRUPT_ISP 8 +#define INTERRUPT_USB 9 +#define INTERRUPT_3D 10 +#define INTERRUPT_TRANSPOSER 11 +#define INTERRUPT_MULTICORESYNC0 12 +#define INTERRUPT_MULTICORESYNC1 13 +#define INTERRUPT_MULTICORESYNC2 14 +#define INTERRUPT_MULTICORESYNC3 15 +#define INTERRUPT_DMA0 16 +#define INTERRUPT_DMA1 17 +#define INTERRUPT_DMA2 18 +#define INTERRUPT_DMA3 19 +#define INTERRUPT_DMA4 20 +#define INTERRUPT_DMA5 21 +#define INTERRUPT_DMA6 22 +#define INTERRUPT_DMA7 23 +#define INTERRUPT_DMA8 24 +#define INTERRUPT_DMA9 25 +#define INTERRUPT_DMA10 26 +#define INTERRUPT_DMA11 27 +#define INTERRUPT_DMA12 28 +#define INTERRUPT_AUX 29 +#define INTERRUPT_ARM 30 +#define INTERRUPT_VPUDMA 31 +#define INTERRUPT_HOSTPORT 32 +#define INTERRUPT_VIDEOSCALER 33 +#define INTERRUPT_CCP2TX 34 +#define INTERRUPT_SDC 35 +#define INTERRUPT_DSI0 36 +#define INTERRUPT_AVE 37 +#define INTERRUPT_CAM0 38 +#define INTERRUPT_CAM1 39 +#define INTERRUPT_HDMI0 40 +#define INTERRUPT_HDMI1 41 +#define INTERRUPT_PIXELVALVE1 42 +#define INTERRUPT_I2CSPISLV 43 +#define INTERRUPT_DSI1 44 +#define INTERRUPT_PWA0 45 +#define INTERRUPT_PWA1 46 +#define INTERRUPT_CPR 47 +#define INTERRUPT_SMI 48 +#define INTERRUPT_GPIO0 49 +#define INTERRUPT_GPIO1 50 +#define INTERRUPT_GPIO2 51 +#define INTERRUPT_GPIO3 52 +#define INTERRUPT_I2C 53 +#define INTERRUPT_SPI 54 +#define INTERRUPT_I2SPCM 55 +#define INTERRUPT_SDIO 56 +#define INTERRUPT_UART 57 +#define INTERRUPT_SLIMBUS 58 +#define INTERRUPT_VEC 59 +#define INTERRUPT_CPG 60 +#define INTERRUPT_RNG 61 +#define INTERRUPT_ARASANSDIO 62 +#define INTERRUPT_AVSPMON 63 + +/* ARM CPU IRQs use a private number space */ +#define INTERRUPT_ARM_TIMER 0 +#define INTERRUPT_ARM_MAILBOX 1 +#define INTERRUPT_ARM_DOORBELL_0 2 +#define INTERRUPT_ARM_DOORBELL_1 3 +#define INTERRUPT_VPU0_HALTED 4 +#define INTERRUPT_VPU1_HALTED 5 +#define INTERRUPT_ILLEGAL_TYPE0 6 +#define INTERRUPT_ILLEGAL_TYPE1 7 diff --git a/qemu/include/hw/arm/virt-acpi-build.h b/qemu/include/hw/arm/virt-acpi-build.h index 04f174d52..7d3700ebf 100644 --- a/qemu/include/hw/arm/virt-acpi-build.h +++ b/qemu/include/hw/arm/virt-acpi-build.h @@ -23,7 +23,6 @@ #include "qemu-common.h" #include "hw/arm/virt.h" -#define VIRT_ACPI_CPU_ID_LIMIT 8 #define ACPI_GICC_ENABLED 1 typedef struct VirtGuestInfo { @@ -31,6 +30,8 @@ typedef struct VirtGuestInfo { FWCfgState *fw_cfg; const MemMapEntry *memmap; const int *irqmap; + bool use_highmem; + int gic_version; } VirtGuestInfo; diff --git a/qemu/include/hw/arm/virt.h b/qemu/include/hw/arm/virt.h index d22fd8e50..ecd858960 100644 --- a/qemu/include/hw/arm/virt.h +++ b/qemu/include/hw/arm/virt.h @@ -46,6 +46,9 @@ enum { VIRT_CPUPERIPHS, VIRT_GIC_DIST, VIRT_GIC_CPU, + VIRT_GIC_V2M, + VIRT_GIC_ITS, + VIRT_GIC_REDIST, VIRT_UART, VIRT_MMIO, VIRT_RTC, @@ -54,8 +57,11 @@ enum { VIRT_PCIE_MMIO, VIRT_PCIE_PIO, VIRT_PCIE_ECAM, - VIRT_GIC_V2M, VIRT_PLATFORM_BUS, + VIRT_PCIE_MMIO_HIGH, + VIRT_GPIO, + VIRT_SECURE_UART, + VIRT_SECURE_MEM, }; typedef struct MemMapEntry { diff --git a/qemu/include/hw/arm/xlnx-zynqmp.h b/qemu/include/hw/arm/xlnx-zynqmp.h index c379632f2..2332596b4 100644 --- a/qemu/include/hw/arm/xlnx-zynqmp.h +++ b/qemu/include/hw/arm/xlnx-zynqmp.h @@ -22,6 +22,10 @@ #include "hw/intc/arm_gic.h" #include "hw/net/cadence_gem.h" #include "hw/char/cadence_uart.h" +#include "hw/ide/pci.h" +#include "hw/ide/ahci.h" +#include "hw/sd/sdhci.h" +#include "hw/ssi/xilinx_spips.h" #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp" #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \ @@ -31,6 +35,12 @@ #define XLNX_ZYNQMP_NUM_RPU_CPUS 2 #define XLNX_ZYNQMP_NUM_GEMS 4 #define XLNX_ZYNQMP_NUM_UARTS 2 +#define XLNX_ZYNQMP_NUM_SDHCI 2 +#define XLNX_ZYNQMP_NUM_SPIS 2 + +#define XLNX_ZYNQMP_NUM_OCM_BANKS 4 +#define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000 +#define XLNX_ZYNQMP_OCM_RAM_SIZE 0x10000 #define XLNX_ZYNQMP_GIC_REGIONS 2 @@ -40,9 +50,17 @@ * number of memory region aliases. */ -#define XLNX_ZYNQMP_GIC_REGION_SIZE 0x4000 +#define XLNX_ZYNQMP_GIC_REGION_SIZE 0x1000 #define XLNX_ZYNQMP_GIC_ALIASES (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE - 1) +#define XLNX_ZYNQMP_MAX_LOW_RAM_SIZE 0x80000000ull + +#define XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE 0x800000000ull +#define XLNX_ZYNQMP_HIGH_RAM_START 0x800000000ull + +#define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ + XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) + typedef struct XlnxZynqMPState { /*< private >*/ DeviceState parent_obj; @@ -52,8 +70,17 @@ typedef struct XlnxZynqMPState { ARMCPU rpu_cpu[XLNX_ZYNQMP_NUM_RPU_CPUS]; GICState gic; MemoryRegion gic_mr[XLNX_ZYNQMP_GIC_REGIONS][XLNX_ZYNQMP_GIC_ALIASES]; + + MemoryRegion ocm_ram[XLNX_ZYNQMP_NUM_OCM_BANKS]; + + MemoryRegion *ddr_ram; + MemoryRegion ddr_ram_low, ddr_ram_high; + CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS]; CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS]; + SysbusAHCIState sata; + SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI]; + XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS]; char *boot_cpu; ARMCPU *boot_cpu_ptr; |