diff options
Diffstat (limited to 'qemu/hw/misc/arm_sysctl.c')
| -rw-r--r-- | qemu/hw/misc/arm_sysctl.c | 656 |
1 files changed, 656 insertions, 0 deletions
diff --git a/qemu/hw/misc/arm_sysctl.c b/qemu/hw/misc/arm_sysctl.c new file mode 100644 index 000000000..3fad6f86d --- /dev/null +++ b/qemu/hw/misc/arm_sysctl.c @@ -0,0 +1,656 @@ +/* + * Status and system control registers for ARM RealView/Versatile boards. + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the GPL. + */ + +#include "hw/hw.h" +#include "qemu/timer.h" +#include "qemu/bitops.h" +#include "hw/sysbus.h" +#include "hw/arm/primecell.h" +#include "sysemu/sysemu.h" + +#define LOCK_VALUE 0xa05f + +#define TYPE_ARM_SYSCTL "realview_sysctl" +#define ARM_SYSCTL(obj) \ + OBJECT_CHECK(arm_sysctl_state, (obj), TYPE_ARM_SYSCTL) + +typedef struct { + SysBusDevice parent_obj; + + MemoryRegion iomem; + qemu_irq pl110_mux_ctrl; + + uint32_t sys_id; + uint32_t leds; + uint16_t lockval; + uint32_t cfgdata1; + uint32_t cfgdata2; + uint32_t flags; + uint32_t nvflags; + uint32_t resetlevel; + uint32_t proc_id; + uint32_t sys_mci; + uint32_t sys_cfgdata; + uint32_t sys_cfgctrl; + uint32_t sys_cfgstat; + uint32_t sys_clcd; + uint32_t mb_clock[6]; + uint32_t *db_clock; + uint32_t db_num_vsensors; + uint32_t *db_voltage; + uint32_t db_num_clocks; + uint32_t *db_clock_reset; +} arm_sysctl_state; + +static const VMStateDescription vmstate_arm_sysctl = { + .name = "realview_sysctl", + .version_id = 4, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(leds, arm_sysctl_state), + VMSTATE_UINT16(lockval, arm_sysctl_state), + VMSTATE_UINT32(cfgdata1, arm_sysctl_state), + VMSTATE_UINT32(cfgdata2, arm_sysctl_state), + VMSTATE_UINT32(flags, arm_sysctl_state), + VMSTATE_UINT32(nvflags, arm_sysctl_state), + VMSTATE_UINT32(resetlevel, arm_sysctl_state), + VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2), + VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2), + VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2), + VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2), + VMSTATE_UINT32_V(sys_clcd, arm_sysctl_state, 3), + VMSTATE_UINT32_ARRAY_V(mb_clock, arm_sysctl_state, 6, 4), + VMSTATE_VARRAY_UINT32(db_clock, arm_sysctl_state, db_num_clocks, + 4, vmstate_info_uint32, uint32_t), + VMSTATE_END_OF_LIST() + } +}; + +/* The PB926 actually uses a different format for + * its SYS_ID register. Fortunately the bits which are + * board type on later boards are distinct. + */ +#define BOARD_ID_PB926 0x100 +#define BOARD_ID_EB 0x140 +#define BOARD_ID_PBA8 0x178 +#define BOARD_ID_PBX 0x182 +#define BOARD_ID_VEXPRESS 0x190 + +static int board_id(arm_sysctl_state *s) +{ + /* Extract the board ID field from the SYS_ID register value */ + return (s->sys_id >> 16) & 0xfff; +} + +static void arm_sysctl_reset(DeviceState *d) +{ + arm_sysctl_state *s = ARM_SYSCTL(d); + int i; + + s->leds = 0; + s->lockval = 0; + s->cfgdata1 = 0; + s->cfgdata2 = 0; + s->flags = 0; + s->resetlevel = 0; + /* Motherboard oscillators (in Hz) */ + s->mb_clock[0] = 50000000; /* Static memory clock: 50MHz */ + s->mb_clock[1] = 23750000; /* motherboard CLCD clock: 23.75MHz */ + s->mb_clock[2] = 24000000; /* IO FPGA peripheral clock: 24MHz */ + s->mb_clock[3] = 24000000; /* IO FPGA reserved clock: 24MHz */ + s->mb_clock[4] = 24000000; /* System bus global clock: 24MHz */ + s->mb_clock[5] = 24000000; /* IO FPGA reserved clock: 24MHz */ + /* Daughterboard oscillators: reset from property values */ + for (i = 0; i < s->db_num_clocks; i++) { + s->db_clock[i] = s->db_clock_reset[i]; + } + if (board_id(s) == BOARD_ID_VEXPRESS) { + /* On VExpress this register will RAZ/WI */ + s->sys_clcd = 0; + } else { + /* All others: CLCDID 0x1f, indicating VGA */ + s->sys_clcd = 0x1f00; + } +} + +static uint64_t arm_sysctl_read(void *opaque, hwaddr offset, + unsigned size) +{ + arm_sysctl_state *s = (arm_sysctl_state *)opaque; + + switch (offset) { + case 0x00: /* ID */ + return s->sys_id; + case 0x04: /* SW */ + /* General purpose hardware switches. + We don't have a useful way of exposing these to the user. */ + return 0; + case 0x08: /* LED */ + return s->leds; + case 0x20: /* LOCK */ + return s->lockval; + case 0x0c: /* OSC0 */ + case 0x10: /* OSC1 */ + case 0x14: /* OSC2 */ + case 0x18: /* OSC3 */ + case 0x1c: /* OSC4 */ + case 0x24: /* 100HZ */ + /* ??? Implement these. */ + return 0; + case 0x28: /* CFGDATA1 */ + return s->cfgdata1; + case 0x2c: /* CFGDATA2 */ + return s->cfgdata2; + case 0x30: /* FLAGS */ + return s->flags; + case 0x38: /* NVFLAGS */ + return s->nvflags; + case 0x40: /* RESETCTL */ + if (board_id(s) == BOARD_ID_VEXPRESS) { + /* reserved: RAZ/WI */ + return 0; + } + return s->resetlevel; + case 0x44: /* PCICTL */ + return 1; + case 0x48: /* MCI */ + return s->sys_mci; + case 0x4c: /* FLASH */ + return 0; + case 0x50: /* CLCD */ + return s->sys_clcd; + case 0x54: /* CLCDSER */ + return 0; + case 0x58: /* BOOTCS */ + return 0; + case 0x5c: /* 24MHz */ + return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), 24000000, get_ticks_per_sec()); + case 0x60: /* MISC */ + return 0; + case 0x84: /* PROCID0 */ + return s->proc_id; + case 0x88: /* PROCID1 */ + return 0xff000000; + case 0x64: /* DMAPSR0 */ + case 0x68: /* DMAPSR1 */ + case 0x6c: /* DMAPSR2 */ + case 0x70: /* IOSEL */ + case 0x74: /* PLDCTL */ + case 0x80: /* BUSID */ + case 0x8c: /* OSCRESET0 */ + case 0x90: /* OSCRESET1 */ + case 0x94: /* OSCRESET2 */ + case 0x98: /* OSCRESET3 */ + case 0x9c: /* OSCRESET4 */ + case 0xc0: /* SYS_TEST_OSC0 */ + case 0xc4: /* SYS_TEST_OSC1 */ + case 0xc8: /* SYS_TEST_OSC2 */ + case 0xcc: /* SYS_TEST_OSC3 */ + case 0xd0: /* SYS_TEST_OSC4 */ + return 0; + case 0xa0: /* SYS_CFGDATA */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + return s->sys_cfgdata; + case 0xa4: /* SYS_CFGCTRL */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + return s->sys_cfgctrl; + case 0xa8: /* SYS_CFGSTAT */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + return s->sys_cfgstat; + default: + bad_reg: + qemu_log_mask(LOG_GUEST_ERROR, + "arm_sysctl_read: Bad register offset 0x%x\n", + (int)offset); + return 0; + } +} + +/* SYS_CFGCTRL functions */ +#define SYS_CFG_OSC 1 +#define SYS_CFG_VOLT 2 +#define SYS_CFG_AMP 3 +#define SYS_CFG_TEMP 4 +#define SYS_CFG_RESET 5 +#define SYS_CFG_SCC 6 +#define SYS_CFG_MUXFPGA 7 +#define SYS_CFG_SHUTDOWN 8 +#define SYS_CFG_REBOOT 9 +#define SYS_CFG_DVIMODE 11 +#define SYS_CFG_POWER 12 +#define SYS_CFG_ENERGY 13 + +/* SYS_CFGCTRL site field values */ +#define SYS_CFG_SITE_MB 0 +#define SYS_CFG_SITE_DB1 1 +#define SYS_CFG_SITE_DB2 2 + +/** + * vexpress_cfgctrl_read: + * @s: arm_sysctl_state pointer + * @dcc, @function, @site, @position, @device: split out values from + * SYS_CFGCTRL register + * @val: pointer to where to put the read data on success + * + * Handle a VExpress SYS_CFGCTRL register read. On success, return true and + * write the read value to *val. On failure, return false (and val may + * or may not be written to). + */ +static bool vexpress_cfgctrl_read(arm_sysctl_state *s, unsigned int dcc, + unsigned int function, unsigned int site, + unsigned int position, unsigned int device, + uint32_t *val) +{ + /* We don't support anything other than DCC 0, board stack position 0 + * or sites other than motherboard/daughterboard: + */ + if (dcc != 0 || position != 0 || + (site != SYS_CFG_SITE_MB && site != SYS_CFG_SITE_DB1)) { + goto cfgctrl_unimp; + } + + switch (function) { + case SYS_CFG_VOLT: + if (site == SYS_CFG_SITE_DB1 && device < s->db_num_vsensors) { + *val = s->db_voltage[device]; + return true; + } + if (site == SYS_CFG_SITE_MB && device == 0) { + /* There is only one motherboard voltage sensor: + * VIO : 3.3V : bus voltage between mother and daughterboard + */ + *val = 3300000; + return true; + } + break; + case SYS_CFG_OSC: + if (site == SYS_CFG_SITE_MB && device < ARRAY_SIZE(s->mb_clock)) { + /* motherboard clock */ + *val = s->mb_clock[device]; + return true; + } + if (site == SYS_CFG_SITE_DB1 && device < s->db_num_clocks) { + /* daughterboard clock */ + *val = s->db_clock[device]; + return true; + } + break; + default: + break; + } + +cfgctrl_unimp: + qemu_log_mask(LOG_UNIMP, + "arm_sysctl: Unimplemented SYS_CFGCTRL read of function " + "0x%x DCC 0x%x site 0x%x position 0x%x device 0x%x\n", + function, dcc, site, position, device); + return false; +} + +/** + * vexpress_cfgctrl_write: + * @s: arm_sysctl_state pointer + * @dcc, @function, @site, @position, @device: split out values from + * SYS_CFGCTRL register + * @val: data to write + * + * Handle a VExpress SYS_CFGCTRL register write. On success, return true. + * On failure, return false. + */ +static bool vexpress_cfgctrl_write(arm_sysctl_state *s, unsigned int dcc, + unsigned int function, unsigned int site, + unsigned int position, unsigned int device, + uint32_t val) +{ + /* We don't support anything other than DCC 0, board stack position 0 + * or sites other than motherboard/daughterboard: + */ + if (dcc != 0 || position != 0 || + (site != SYS_CFG_SITE_MB && site != SYS_CFG_SITE_DB1)) { + goto cfgctrl_unimp; + } + + switch (function) { + case SYS_CFG_OSC: + if (site == SYS_CFG_SITE_MB && device < ARRAY_SIZE(s->mb_clock)) { + /* motherboard clock */ + s->mb_clock[device] = val; + return true; + } + if (site == SYS_CFG_SITE_DB1 && device < s->db_num_clocks) { + /* daughterboard clock */ + s->db_clock[device] = val; + return true; + } + break; + case SYS_CFG_MUXFPGA: + if (site == SYS_CFG_SITE_MB && device == 0) { + /* Select whether video output comes from motherboard + * or daughterboard: log and ignore as QEMU doesn't + * support this. + */ + qemu_log_mask(LOG_UNIMP, "arm_sysctl: selection of video output " + "not supported, ignoring\n"); + return true; + } + break; + case SYS_CFG_SHUTDOWN: + if (site == SYS_CFG_SITE_MB && device == 0) { + qemu_system_shutdown_request(); + return true; + } + break; + case SYS_CFG_REBOOT: + if (site == SYS_CFG_SITE_MB && device == 0) { + qemu_system_reset_request(); + return true; + } + break; + case SYS_CFG_DVIMODE: + if (site == SYS_CFG_SITE_MB && device == 0) { + /* Selecting DVI mode is meaningless for QEMU: we will + * always display the output correctly according to the + * pixel height/width programmed into the CLCD controller. + */ + return true; + } + default: + break; + } + +cfgctrl_unimp: + qemu_log_mask(LOG_UNIMP, + "arm_sysctl: Unimplemented SYS_CFGCTRL write of function " + "0x%x DCC 0x%x site 0x%x position 0x%x device 0x%x\n", + function, dcc, site, position, device); + return false; +} + +static void arm_sysctl_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + arm_sysctl_state *s = (arm_sysctl_state *)opaque; + + switch (offset) { + case 0x08: /* LED */ + s->leds = val; + break; + case 0x0c: /* OSC0 */ + case 0x10: /* OSC1 */ + case 0x14: /* OSC2 */ + case 0x18: /* OSC3 */ + case 0x1c: /* OSC4 */ + /* ??? */ + break; + case 0x20: /* LOCK */ + if (val == LOCK_VALUE) + s->lockval = val; + else + s->lockval = val & 0x7fff; + break; + case 0x28: /* CFGDATA1 */ + /* ??? Need to implement this. */ + s->cfgdata1 = val; + break; + case 0x2c: /* CFGDATA2 */ + /* ??? Need to implement this. */ + s->cfgdata2 = val; + break; + case 0x30: /* FLAGSSET */ + s->flags |= val; + break; + case 0x34: /* FLAGSCLR */ + s->flags &= ~val; + break; + case 0x38: /* NVFLAGSSET */ + s->nvflags |= val; + break; + case 0x3c: /* NVFLAGSCLR */ + s->nvflags &= ~val; + break; + case 0x40: /* RESETCTL */ + switch (board_id(s)) { + case BOARD_ID_PB926: + if (s->lockval == LOCK_VALUE) { + s->resetlevel = val; + if (val & 0x100) { + qemu_system_reset_request(); + } + } + break; + case BOARD_ID_PBX: + case BOARD_ID_PBA8: + if (s->lockval == LOCK_VALUE) { + s->resetlevel = val; + if (val & 0x04) { + qemu_system_reset_request(); + } + } + break; + case BOARD_ID_VEXPRESS: + case BOARD_ID_EB: + default: + /* reserved: RAZ/WI */ + break; + } + break; + case 0x44: /* PCICTL */ + /* nothing to do. */ + break; + case 0x4c: /* FLASH */ + break; + case 0x50: /* CLCD */ + switch (board_id(s)) { + case BOARD_ID_PB926: + /* On 926 bits 13:8 are R/O, bits 1:0 control + * the mux that defines how to interpret the PL110 + * graphics format, and other bits are r/w but we + * don't implement them to do anything. + */ + s->sys_clcd &= 0x3f00; + s->sys_clcd |= val & ~0x3f00; + qemu_set_irq(s->pl110_mux_ctrl, val & 3); + break; + case BOARD_ID_EB: + /* The EB is the same except that there is no mux since + * the EB has a PL111. + */ + s->sys_clcd &= 0x3f00; + s->sys_clcd |= val & ~0x3f00; + break; + case BOARD_ID_PBA8: + case BOARD_ID_PBX: + /* On PBA8 and PBX bit 7 is r/w and all other bits + * are either r/o or RAZ/WI. + */ + s->sys_clcd &= (1 << 7); + s->sys_clcd |= val & ~(1 << 7); + break; + case BOARD_ID_VEXPRESS: + default: + /* On VExpress this register is unimplemented and will RAZ/WI */ + break; + } + break; + case 0x54: /* CLCDSER */ + case 0x64: /* DMAPSR0 */ + case 0x68: /* DMAPSR1 */ + case 0x6c: /* DMAPSR2 */ + case 0x70: /* IOSEL */ + case 0x74: /* PLDCTL */ + case 0x80: /* BUSID */ + case 0x84: /* PROCID0 */ + case 0x88: /* PROCID1 */ + case 0x8c: /* OSCRESET0 */ + case 0x90: /* OSCRESET1 */ + case 0x94: /* OSCRESET2 */ + case 0x98: /* OSCRESET3 */ + case 0x9c: /* OSCRESET4 */ + break; + case 0xa0: /* SYS_CFGDATA */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + s->sys_cfgdata = val; + return; + case 0xa4: /* SYS_CFGCTRL */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + /* Undefined bits [19:18] are RAZ/WI, and writing to + * the start bit just triggers the action; it always reads + * as zero. + */ + s->sys_cfgctrl = val & ~((3 << 18) | (1 << 31)); + if (val & (1 << 31)) { + /* Start bit set -- actually do something */ + unsigned int dcc = extract32(s->sys_cfgctrl, 26, 4); + unsigned int function = extract32(s->sys_cfgctrl, 20, 6); + unsigned int site = extract32(s->sys_cfgctrl, 16, 2); + unsigned int position = extract32(s->sys_cfgctrl, 12, 4); + unsigned int device = extract32(s->sys_cfgctrl, 0, 12); + s->sys_cfgstat = 1; /* complete */ + if (s->sys_cfgctrl & (1 << 30)) { + if (!vexpress_cfgctrl_write(s, dcc, function, site, position, + device, s->sys_cfgdata)) { + s->sys_cfgstat |= 2; /* error */ + } + } else { + uint32_t val; + if (!vexpress_cfgctrl_read(s, dcc, function, site, position, + device, &val)) { + s->sys_cfgstat |= 2; /* error */ + } else { + s->sys_cfgdata = val; + } + } + } + s->sys_cfgctrl &= ~(1 << 31); + return; + case 0xa8: /* SYS_CFGSTAT */ + if (board_id(s) != BOARD_ID_VEXPRESS) { + goto bad_reg; + } + s->sys_cfgstat = val & 3; + return; + default: + bad_reg: + qemu_log_mask(LOG_GUEST_ERROR, + "arm_sysctl_write: Bad register offset 0x%x\n", + (int)offset); + return; + } +} + +static const MemoryRegionOps arm_sysctl_ops = { + .read = arm_sysctl_read, + .write = arm_sysctl_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void arm_sysctl_gpio_set(void *opaque, int line, int level) +{ + arm_sysctl_state *s = (arm_sysctl_state *)opaque; + switch (line) { + case ARM_SYSCTL_GPIO_MMC_WPROT: + { + /* For PB926 and EB write-protect is bit 2 of SYS_MCI; + * for all later boards it is bit 1. + */ + int bit = 2; + if ((board_id(s) == BOARD_ID_PB926) || (board_id(s) == BOARD_ID_EB)) { + bit = 4; + } + s->sys_mci &= ~bit; + if (level) { + s->sys_mci |= bit; + } + break; + } + case ARM_SYSCTL_GPIO_MMC_CARDIN: + s->sys_mci &= ~1; + if (level) { + s->sys_mci |= 1; + } + break; + } +} + +static void arm_sysctl_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + SysBusDevice *sd = SYS_BUS_DEVICE(obj); + arm_sysctl_state *s = ARM_SYSCTL(obj); + + memory_region_init_io(&s->iomem, OBJECT(dev), &arm_sysctl_ops, s, + "arm-sysctl", 0x1000); + sysbus_init_mmio(sd, &s->iomem); + qdev_init_gpio_in(dev, arm_sysctl_gpio_set, 2); + qdev_init_gpio_out(dev, &s->pl110_mux_ctrl, 1); +} + +static void arm_sysctl_realize(DeviceState *d, Error **errp) +{ + arm_sysctl_state *s = ARM_SYSCTL(d); + + s->db_clock = g_new0(uint32_t, s->db_num_clocks); +} + +static void arm_sysctl_finalize(Object *obj) +{ + arm_sysctl_state *s = ARM_SYSCTL(obj); + + g_free(s->db_voltage); + g_free(s->db_clock); + g_free(s->db_clock_reset); +} + +static Property arm_sysctl_properties[] = { + DEFINE_PROP_UINT32("sys_id", arm_sysctl_state, sys_id, 0), + DEFINE_PROP_UINT32("proc_id", arm_sysctl_state, proc_id, 0), + /* Daughterboard power supply voltages (as reported via SYS_CFG) */ + DEFINE_PROP_ARRAY("db-voltage", arm_sysctl_state, db_num_vsensors, + db_voltage, qdev_prop_uint32, uint32_t), + /* Daughterboard clock reset values (as reported via SYS_CFG) */ + DEFINE_PROP_ARRAY("db-clock", arm_sysctl_state, db_num_clocks, + db_clock_reset, qdev_prop_uint32, uint32_t), + DEFINE_PROP_END_OF_LIST(), +}; + +static void arm_sysctl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = arm_sysctl_realize; + dc->reset = arm_sysctl_reset; + dc->vmsd = &vmstate_arm_sysctl; + dc->props = arm_sysctl_properties; +} + +static const TypeInfo arm_sysctl_info = { + .name = TYPE_ARM_SYSCTL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(arm_sysctl_state), + .instance_init = arm_sysctl_init, + .instance_finalize = arm_sysctl_finalize, + .class_init = arm_sysctl_class_init, +}; + +static void arm_sysctl_register_types(void) +{ + type_register_static(&arm_sysctl_info); +} + +type_init(arm_sysctl_register_types) |