diff options
Diffstat (limited to 'qemu/hw/intc/arm_gic_common.c')
| -rw-r--r-- | qemu/hw/intc/arm_gic_common.c | 102 |
1 files changed, 94 insertions, 8 deletions
diff --git a/qemu/hw/intc/arm_gic_common.c b/qemu/hw/intc/arm_gic_common.c index a64d0714e..0a1f56af1 100644 --- a/qemu/hw/intc/arm_gic_common.c +++ b/qemu/hw/intc/arm_gic_common.c @@ -18,7 +18,10 @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ +#include "qemu/osdep.h" +#include "qapi/error.h" #include "gic_internal.h" +#include "hw/arm/linux-boot-if.h" static void gic_pre_save(void *opaque) { @@ -59,8 +62,8 @@ static const VMStateDescription vmstate_gic_irq_state = { static const VMStateDescription vmstate_gic = { .name = "arm_gic", - .version_id = 10, - .minimum_version_id = 10, + .version_id = 12, + .minimum_version_id = 12, .pre_save = gic_pre_save, .post_load = gic_post_load, .fields = (VMStateField[]) { @@ -71,19 +74,59 @@ static const VMStateDescription vmstate_gic = { VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ), VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU), VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL), - VMSTATE_UINT16_2DARRAY(last_active, GICState, GIC_MAXIRQ, GIC_NCPU), VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU), VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU), - VMSTATE_UINT16_ARRAY(running_irq, GICState, GIC_NCPU), VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU), VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU), VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU), VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU), VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU), + VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU), VMSTATE_END_OF_LIST() } }; +void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, + const MemoryRegionOps *ops) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + int i = s->num_irq - GIC_INTERNAL; + + /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU. + * GPIO array layout is thus: + * [0..N-1] SPIs + * [N..N+31] PPIs for CPU 0 + * [N+32..N+63] PPIs for CPU 1 + * ... + */ + if (s->revision != REV_NVIC) { + i += (GIC_INTERNAL * s->num_cpu); + } + qdev_init_gpio_in(DEVICE(s), handler, i); + + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->parent_irq[i]); + } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->parent_fiq[i]); + } + + /* Distributor */ + memory_region_init_io(&s->iomem, OBJECT(s), ops, s, "gic_dist", 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + + if (s->revision != REV_NVIC) { + /* This is the main CPU interface "for this core". It is always + * present because it is required by both software emulation and KVM. + * NVIC is not handled here because its CPU interface is different, + * neither it can use KVM. + */ + memory_region_init_io(&s->cpuiomem[0], OBJECT(s), ops ? &ops[1] : NULL, + s, "gic_cpu", s->revision == 2 ? 0x2000 : 0x100); + sysbus_init_mmio(sbd, &s->cpuiomem[0]); + } +} + static void arm_gic_common_realize(DeviceState *dev, Error **errp) { GICState *s = ARM_GIC_COMMON(dev); @@ -124,21 +167,35 @@ static void arm_gic_common_reset(DeviceState *dev) { GICState *s = ARM_GIC_COMMON(dev); int i, j; + int resetprio; + + /* If we're resetting a TZ-aware GIC as if secure firmware + * had set it up ready to start a kernel in non-secure, + * we need to set interrupt priorities to a "zero for the + * NS view" value. This is particularly critical for the + * priority_mask[] values, because if they are zero then NS + * code cannot ever rewrite the priority to anything else. + */ + if (s->security_extn && s->irq_reset_nonsecure) { + resetprio = 0x80; + } else { + resetprio = 0; + } + memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state)); for (i = 0 ; i < s->num_cpu; i++) { if (s->revision == REV_11MPCORE) { s->priority_mask[i] = 0xf0; } else { - s->priority_mask[i] = 0; + s->priority_mask[i] = resetprio; } s->current_pending[i] = 1023; - s->running_irq[i] = 1023; s->running_priority[i] = 0x100; s->cpu_ctlr[i] = 0; s->bpr[i] = GIC_MIN_BPR; s->abpr[i] = GIC_MIN_ABPR; for (j = 0; j < GIC_INTERNAL; j++) { - s->priority1[j][i] = 0; + s->priority1[j][i] = resetprio; } for (j = 0; j < GIC_NR_SGIS; j++) { s->sgi_pending[j][i] = 0; @@ -150,7 +207,7 @@ static void arm_gic_common_reset(DeviceState *dev) } for (i = 0; i < ARRAY_SIZE(s->priority2); i++) { - s->priority2[i] = 0; + s->priority2[i] = resetprio; } for (i = 0; i < GIC_MAXIRQ; i++) { @@ -161,9 +218,32 @@ static void arm_gic_common_reset(DeviceState *dev) s->irq_target[i] = 0; } } + if (s->security_extn && s->irq_reset_nonsecure) { + for (i = 0; i < GIC_MAXIRQ; i++) { + GIC_SET_GROUP(i, ALL_CPU_MASK); + } + } + s->ctlr = 0; } +static void arm_gic_common_linux_init(ARMLinuxBootIf *obj, + bool secure_boot) +{ + GICState *s = ARM_GIC_COMMON(obj); + + if (s->security_extn && !secure_boot) { + /* We're directly booting a kernel into NonSecure. If this GIC + * implements the security extensions then we must configure it + * to have all the interrupts be NonSecure (this is a job that + * is done by the Secure boot firmware in real hardware, and in + * this mode QEMU is acting as a minimalist firmware-and-bootloader + * equivalent). + */ + s->irq_reset_nonsecure = true; + } +} + static Property arm_gic_common_properties[] = { DEFINE_PROP_UINT32("num-cpu", GICState, num_cpu, 1), DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32), @@ -180,11 +260,13 @@ static Property arm_gic_common_properties[] = { static void arm_gic_common_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass); dc->reset = arm_gic_common_reset; dc->realize = arm_gic_common_realize; dc->props = arm_gic_common_properties; dc->vmsd = &vmstate_gic; + albifc->arm_linux_init = arm_gic_common_linux_init; } static const TypeInfo arm_gic_common_type = { @@ -194,6 +276,10 @@ static const TypeInfo arm_gic_common_type = { .class_size = sizeof(ARMGICCommonClass), .class_init = arm_gic_common_class_init, .abstract = true, + .interfaces = (InterfaceInfo []) { + { TYPE_ARM_LINUX_BOOT_IF }, + { }, + }, }; static void register_types(void) |