diff options
Diffstat (limited to 'qemu/hw/ide/ahci.h')
| -rw-r--r-- | qemu/hw/ide/ahci.h | 405 |
1 files changed, 0 insertions, 405 deletions
diff --git a/qemu/hw/ide/ahci.h b/qemu/hw/ide/ahci.h deleted file mode 100644 index bc777ed5c..000000000 --- a/qemu/hw/ide/ahci.h +++ /dev/null @@ -1,405 +0,0 @@ -/* - * QEMU AHCI Emulation - * - * Copyright (c) 2010 qiaochong@loongson.cn - * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com> - * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> - * Copyright (c) 2010 Alexander Graf <agraf@suse.de> - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, see <http://www.gnu.org/licenses/>. - * - */ - -#ifndef HW_IDE_AHCI_H -#define HW_IDE_AHCI_H - -#include <hw/sysbus.h> - -#define AHCI_MEM_BAR_SIZE 0x1000 -#define AHCI_MAX_PORTS 32 -#define AHCI_MAX_SG 168 /* hardware max is 64K */ -#define AHCI_DMA_BOUNDARY 0xffffffff -#define AHCI_USE_CLUSTERING 0 -#define AHCI_MAX_CMDS 32 -#define AHCI_CMD_SZ 32 -#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) -#define AHCI_RX_FIS_SZ 256 -#define AHCI_CMD_TBL_CDB 0x40 -#define AHCI_CMD_TBL_HDR_SZ 0x80 -#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) -#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) -#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ - AHCI_RX_FIS_SZ) - -#define AHCI_IRQ_ON_SG (1U << 31) -#define AHCI_CMD_ATAPI (1 << 5) -#define AHCI_CMD_WRITE (1 << 6) -#define AHCI_CMD_PREFETCH (1 << 7) -#define AHCI_CMD_RESET (1 << 8) -#define AHCI_CMD_CLR_BUSY (1 << 10) - -#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ -#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ -#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ - -/* global controller registers */ -#define HOST_CAP 0x00 /* host capabilities */ -#define HOST_CTL 0x04 /* global host control */ -#define HOST_IRQ_STAT 0x08 /* interrupt status */ -#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ -#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ - -/* HOST_CTL bits */ -#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ -#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ -#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */ - -/* HOST_CAP bits */ -#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ -#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ -#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ -#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ -#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ -#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */ - -/* registers for each SATA port */ -#define PORT_LST_ADDR 0x00 /* command list DMA addr */ -#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ -#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ -#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ -#define PORT_IRQ_STAT 0x10 /* interrupt status */ -#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ -#define PORT_CMD 0x18 /* port command */ -#define PORT_TFDATA 0x20 /* taskfile data */ -#define PORT_SIG 0x24 /* device TF signature */ -#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ -#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ -#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ -#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ -#define PORT_CMD_ISSUE 0x38 /* command issue */ -#define PORT_RESERVED 0x3c /* reserved */ - -/* PORT_IRQ_{STAT,MASK} bits */ -#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */ -#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ -#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ -#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ -#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ -#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ -#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ -#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ - -#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ -#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ -#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ -#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ -#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ -#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ -#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ -#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ -#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ - -#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ - PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ - PORT_IRQ_UNK_FIS) -#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ - PORT_IRQ_HBUS_DATA_ERR) -#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) - -/* PORT_CMD bits */ -#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ -#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ -#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ -#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ -#define PORT_CMD_CLO (1 << 3) /* Command list override */ -#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ -#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ -#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ - -#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */ -#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ -#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ -#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ - -#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */ - -/* ap->flags bits */ -#define AHCI_FLAG_NO_NCQ (1 << 24) -#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ -#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ -#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ -#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ - -#define ATA_SRST (1 << 2) /* software reset */ - -#define STATE_RUN 0 -#define STATE_RESET 1 - -#define SATA_SCR_SSTATUS_DET_NODEV 0x0 -#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 - -#define SATA_SCR_SSTATUS_SPD_NODEV 0x00 -#define SATA_SCR_SSTATUS_SPD_GEN1 0x10 - -#define SATA_SCR_SSTATUS_IPM_NODEV 0x000 -#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 - -#define AHCI_SCR_SCTL_DET 0xf - -#define SATA_FIS_TYPE_REGISTER_H2D 0x27 -#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 -#define SATA_FIS_TYPE_REGISTER_D2H 0x34 -#define SATA_FIS_TYPE_PIO_SETUP 0x5f -#define SATA_FIS_TYPE_SDB 0xA1 - -#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f -#define AHCI_CMD_HDR_PRDT_LEN 16 - -#define SATA_SIGNATURE_CDROM 0xeb140101 -#define SATA_SIGNATURE_DISK 0x00000101 - -#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20 - /* Shouldn't this be 0x2c? */ - -#define AHCI_PORT_REGS_START_ADDR 0x100 -#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f -#define AHCI_PORT_ADDR_OFFSET_LEN 0x80 - -#define AHCI_NUM_COMMAND_SLOTS 31 -#define AHCI_SUPPORTED_SPEED 20 -#define AHCI_SUPPORTED_SPEED_GEN1 1 -#define AHCI_VERSION_1_0 0x10000 - -#define AHCI_PROGMODE_MAJOR_REV_1 1 - -#define AHCI_COMMAND_TABLE_ACMD 0x40 - -#define AHCI_PRDT_SIZE_MASK 0x3fffff - -#define IDE_FEATURE_DMA 1 - -#define READ_FPDMA_QUEUED 0x60 -#define WRITE_FPDMA_QUEUED 0x61 -#define NCQ_NON_DATA 0x63 -#define RECEIVE_FPDMA_QUEUED 0x65 -#define SEND_FPDMA_QUEUED 0x64 - -#define NCQ_FIS_FUA_MASK 0x80 -#define NCQ_FIS_RARC_MASK 0x01 - -#define RES_FIS_DSFIS 0x00 -#define RES_FIS_PSFIS 0x20 -#define RES_FIS_RFIS 0x40 -#define RES_FIS_SDBFIS 0x58 -#define RES_FIS_UFIS 0x60 - -#define SATA_CAP_SIZE 0x8 -#define SATA_CAP_REV 0x2 -#define SATA_CAP_BAR 0x4 - -typedef struct AHCIControlRegs { - uint32_t cap; - uint32_t ghc; - uint32_t irqstatus; - uint32_t impl; - uint32_t version; -} AHCIControlRegs; - -typedef struct AHCIPortRegs { - uint32_t lst_addr; - uint32_t lst_addr_hi; - uint32_t fis_addr; - uint32_t fis_addr_hi; - uint32_t irq_stat; - uint32_t irq_mask; - uint32_t cmd; - uint32_t unused0; - uint32_t tfdata; - uint32_t sig; - uint32_t scr_stat; - uint32_t scr_ctl; - uint32_t scr_err; - uint32_t scr_act; - uint32_t cmd_issue; - uint32_t reserved; -} AHCIPortRegs; - -typedef struct AHCICmdHdr { - uint16_t opts; - uint16_t prdtl; - uint32_t status; - uint64_t tbl_addr; - uint32_t reserved[4]; -} QEMU_PACKED AHCICmdHdr; - -typedef struct AHCI_SG { - uint64_t addr; - uint32_t reserved; - uint32_t flags_size; -} QEMU_PACKED AHCI_SG; - -typedef struct AHCIDevice AHCIDevice; - -typedef struct NCQTransferState { - AHCIDevice *drive; - BlockAIOCB *aiocb; - AHCICmdHdr *cmdh; - QEMUSGList sglist; - BlockAcctCookie acct; - uint32_t sector_count; - uint64_t lba; - uint8_t tag; - uint8_t cmd; - uint8_t slot; - bool used; - bool halt; -} NCQTransferState; - -struct AHCIDevice { - IDEDMA dma; - IDEBus port; - int port_no; - uint32_t port_state; - uint32_t finished; - AHCIPortRegs port_regs; - struct AHCIState *hba; - QEMUBH *check_bh; - uint8_t *lst; - uint8_t *res_fis; - bool done_atapi_packet; - int32_t busy_slot; - bool init_d2h_sent; - AHCICmdHdr *cur_cmd; - NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; -}; - -typedef struct AHCIState { - DeviceState *container; - - AHCIDevice *dev; - AHCIControlRegs control_regs; - MemoryRegion mem; - MemoryRegion idp; /* Index-Data Pair I/O port space */ - unsigned idp_offset; /* Offset of index in I/O port space */ - uint32_t idp_index; /* Current IDP index */ - int32_t ports; - qemu_irq irq; - AddressSpace *as; -} AHCIState; - -typedef struct AHCIPCIState { - /*< private >*/ - PCIDevice parent_obj; - /*< public >*/ - - AHCIState ahci; -} AHCIPCIState; - -#define TYPE_ICH9_AHCI "ich9-ahci" - -#define ICH_AHCI(obj) \ - OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI) - -extern const VMStateDescription vmstate_ahci; - -#define VMSTATE_AHCI(_field, _state) { \ - .name = (stringify(_field)), \ - .size = sizeof(AHCIState), \ - .vmsd = &vmstate_ahci, \ - .flags = VMS_STRUCT, \ - .offset = vmstate_offset_value(_state, _field, AHCIState), \ -} - -/** - * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2), - * but some fields have been re-mapped and re-purposed, as seen in - * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED") - * - * cmd_fis[3], feature 7:0, becomes sector count 7:0. - * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit. - * cmd_fis[11], feature 15:8, becomes sector count 15:8. - * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0) - * cmd_fis[13], count 15:8, becomes the priority value (7:6) - * bytes 16-19 become an le32 "auxiliary" field. - */ -typedef struct NCQFrame { - uint8_t fis_type; - uint8_t c; - uint8_t command; - uint8_t sector_count_low; /* (feature 7:0) */ - uint8_t lba0; - uint8_t lba1; - uint8_t lba2; - uint8_t fua; /* (device 7:0) */ - uint8_t lba3; - uint8_t lba4; - uint8_t lba5; - uint8_t sector_count_high; /* (feature 15:8) */ - uint8_t tag; /* (count 0:7) */ - uint8_t prio; /* (count 15:8) */ - uint8_t icc; - uint8_t control; - uint8_t aux0; - uint8_t aux1; - uint8_t aux2; - uint8_t aux3; -} QEMU_PACKED NCQFrame; - -typedef struct SDBFIS { - uint8_t type; - uint8_t flags; - uint8_t status; - uint8_t error; - uint32_t payload; -} QEMU_PACKED SDBFIS; - -void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports); -void ahci_init(AHCIState *s, DeviceState *qdev); -void ahci_uninit(AHCIState *s); - -void ahci_reset(AHCIState *s); - -void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd); - -#define TYPE_SYSBUS_AHCI "sysbus-ahci" -#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI) - -typedef struct SysbusAHCIState { - /*< private >*/ - SysBusDevice parent_obj; - /*< public >*/ - - AHCIState ahci; - uint32_t num_ports; -} SysbusAHCIState; - -#define TYPE_ALLWINNER_AHCI "allwinner-ahci" -#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \ - TYPE_ALLWINNER_AHCI) - -#define ALLWINNER_AHCI_MMIO_OFF 0x80 -#define ALLWINNER_AHCI_MMIO_SIZE 0x80 - -struct AllwinnerAHCIState { - /*< private >*/ - SysbusAHCIState parent_obj; - /*< public >*/ - - MemoryRegion mmio; - uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4]; -}; - -#endif /* HW_IDE_AHCI_H */ |