summaryrefslogtreecommitdiffstats
path: root/qemu/hw/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/hw/i2c')
-rw-r--r--qemu/hw/i2c/Makefile.objs7
-rw-r--r--qemu/hw/i2c/bitbang_i2c.c252
-rw-r--r--qemu/hw/i2c/bitbang_i2c.h14
-rw-r--r--qemu/hw/i2c/core.c245
-rw-r--r--qemu/hw/i2c/exynos4210_i2c.c336
-rw-r--r--qemu/hw/i2c/omap_i2c.c504
-rw-r--r--qemu/hw/i2c/pm_smbus.c227
-rw-r--r--qemu/hw/i2c/smbus.c361
-rw-r--r--qemu/hw/i2c/smbus_eeprom.c158
-rw-r--r--qemu/hw/i2c/smbus_ich9.c129
-rw-r--r--qemu/hw/i2c/versatile_i2c.c113
11 files changed, 2346 insertions, 0 deletions
diff --git a/qemu/hw/i2c/Makefile.objs b/qemu/hw/i2c/Makefile.objs
new file mode 100644
index 000000000..0f130608c
--- /dev/null
+++ b/qemu/hw/i2c/Makefile.objs
@@ -0,0 +1,7 @@
+common-obj-y += core.o smbus.o smbus_eeprom.o
+common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
+common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o
+common-obj-$(CONFIG_APM) += pm_smbus.o
+common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o
+common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o
+obj-$(CONFIG_OMAP) += omap_i2c.o
diff --git a/qemu/hw/i2c/bitbang_i2c.c b/qemu/hw/i2c/bitbang_i2c.c
new file mode 100644
index 000000000..6d1bb03d6
--- /dev/null
+++ b/qemu/hw/i2c/bitbang_i2c.c
@@ -0,0 +1,252 @@
+/*
+ * Bit-Bang i2c emulation extracted from
+ * Marvell MV88W8618 / Freecom MusicPal emulation.
+ *
+ * Copyright (c) 2008 Jan Kiszka
+ *
+ * This code is licensed under the GNU GPL v2.
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ */
+#include "hw/hw.h"
+#include "bitbang_i2c.h"
+#include "hw/sysbus.h"
+
+//#define DEBUG_BITBANG_I2C
+
+#ifdef DEBUG_BITBANG_I2C
+#define DPRINTF(fmt, ...) \
+do { printf("bitbang_i2c: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#endif
+
+typedef enum bitbang_i2c_state {
+ STOPPED = 0,
+ SENDING_BIT7,
+ SENDING_BIT6,
+ SENDING_BIT5,
+ SENDING_BIT4,
+ SENDING_BIT3,
+ SENDING_BIT2,
+ SENDING_BIT1,
+ SENDING_BIT0,
+ WAITING_FOR_ACK,
+ RECEIVING_BIT7,
+ RECEIVING_BIT6,
+ RECEIVING_BIT5,
+ RECEIVING_BIT4,
+ RECEIVING_BIT3,
+ RECEIVING_BIT2,
+ RECEIVING_BIT1,
+ RECEIVING_BIT0,
+ SENDING_ACK,
+ SENT_NACK
+} bitbang_i2c_state;
+
+struct bitbang_i2c_interface {
+ I2CBus *bus;
+ bitbang_i2c_state state;
+ int last_data;
+ int last_clock;
+ int device_out;
+ uint8_t buffer;
+ int current_addr;
+};
+
+static void bitbang_i2c_enter_stop(bitbang_i2c_interface *i2c)
+{
+ DPRINTF("STOP\n");
+ if (i2c->current_addr >= 0)
+ i2c_end_transfer(i2c->bus);
+ i2c->current_addr = -1;
+ i2c->state = STOPPED;
+}
+
+/* Set device data pin. */
+static int bitbang_i2c_ret(bitbang_i2c_interface *i2c, int level)
+{
+ i2c->device_out = level;
+ //DPRINTF("%d %d %d\n", i2c->last_clock, i2c->last_data, i2c->device_out);
+ return level & i2c->last_data;
+}
+
+/* Leave device data pin unodified. */
+static int bitbang_i2c_nop(bitbang_i2c_interface *i2c)
+{
+ return bitbang_i2c_ret(i2c, i2c->device_out);
+}
+
+/* Returns data line level. */
+int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
+{
+ int data;
+
+ if (level != 0 && level != 1) {
+ abort();
+ }
+
+ if (line == BITBANG_I2C_SDA) {
+ if (level == i2c->last_data) {
+ return bitbang_i2c_nop(i2c);
+ }
+ i2c->last_data = level;
+ if (i2c->last_clock == 0) {
+ return bitbang_i2c_nop(i2c);
+ }
+ if (level == 0) {
+ DPRINTF("START\n");
+ /* START condition. */
+ i2c->state = SENDING_BIT7;
+ i2c->current_addr = -1;
+ } else {
+ /* STOP condition. */
+ bitbang_i2c_enter_stop(i2c);
+ }
+ return bitbang_i2c_ret(i2c, 1);
+ }
+
+ data = i2c->last_data;
+ if (i2c->last_clock == level) {
+ return bitbang_i2c_nop(i2c);
+ }
+ i2c->last_clock = level;
+ if (level == 0) {
+ /* State is set/read at the start of the clock pulse.
+ release the data line at the end. */
+ return bitbang_i2c_ret(i2c, 1);
+ }
+ switch (i2c->state) {
+ case STOPPED:
+ case SENT_NACK:
+ return bitbang_i2c_ret(i2c, 1);
+
+ case SENDING_BIT7 ... SENDING_BIT0:
+ i2c->buffer = (i2c->buffer << 1) | data;
+ /* will end up in WAITING_FOR_ACK */
+ i2c->state++;
+ return bitbang_i2c_ret(i2c, 1);
+
+ case WAITING_FOR_ACK:
+ if (i2c->current_addr < 0) {
+ i2c->current_addr = i2c->buffer;
+ DPRINTF("Address 0x%02x\n", i2c->current_addr);
+ i2c_start_transfer(i2c->bus, i2c->current_addr >> 1,
+ i2c->current_addr & 1);
+ } else {
+ DPRINTF("Sent 0x%02x\n", i2c->buffer);
+ i2c_send(i2c->bus, i2c->buffer);
+ }
+ if (i2c->current_addr & 1) {
+ i2c->state = RECEIVING_BIT7;
+ } else {
+ i2c->state = SENDING_BIT7;
+ }
+ return bitbang_i2c_ret(i2c, 0);
+
+ case RECEIVING_BIT7:
+ i2c->buffer = i2c_recv(i2c->bus);
+ DPRINTF("RX byte 0x%02x\n", i2c->buffer);
+ /* Fall through... */
+ case RECEIVING_BIT6 ... RECEIVING_BIT0:
+ data = i2c->buffer >> 7;
+ /* will end up in SENDING_ACK */
+ i2c->state++;
+ i2c->buffer <<= 1;
+ return bitbang_i2c_ret(i2c, data);
+
+ case SENDING_ACK:
+ i2c->state = RECEIVING_BIT7;
+ if (data != 0) {
+ DPRINTF("NACKED\n");
+ i2c->state = SENT_NACK;
+ i2c_nack(i2c->bus);
+ } else {
+ DPRINTF("ACKED\n");
+ }
+ return bitbang_i2c_ret(i2c, 1);
+ }
+ abort();
+}
+
+bitbang_i2c_interface *bitbang_i2c_init(I2CBus *bus)
+{
+ bitbang_i2c_interface *s;
+
+ s = g_malloc0(sizeof(bitbang_i2c_interface));
+
+ s->bus = bus;
+ s->last_data = 1;
+ s->last_clock = 1;
+ s->device_out = 1;
+
+ return s;
+}
+
+/* GPIO interface. */
+
+#define TYPE_GPIO_I2C "gpio_i2c"
+#define GPIO_I2C(obj) OBJECT_CHECK(GPIOI2CState, (obj), TYPE_GPIO_I2C)
+
+typedef struct GPIOI2CState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion dummy_iomem;
+ bitbang_i2c_interface *bitbang;
+ int last_level;
+ qemu_irq out;
+} GPIOI2CState;
+
+static void bitbang_i2c_gpio_set(void *opaque, int irq, int level)
+{
+ GPIOI2CState *s = opaque;
+
+ level = bitbang_i2c_set(s->bitbang, irq, level);
+ if (level != s->last_level) {
+ s->last_level = level;
+ qemu_set_irq(s->out, level);
+ }
+}
+
+static int gpio_i2c_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ GPIOI2CState *s = GPIO_I2C(dev);
+ I2CBus *bus;
+
+ memory_region_init(&s->dummy_iomem, OBJECT(s), "gpio_i2c", 0);
+ sysbus_init_mmio(sbd, &s->dummy_iomem);
+
+ bus = i2c_init_bus(dev, "i2c");
+ s->bitbang = bitbang_i2c_init(bus);
+
+ qdev_init_gpio_in(dev, bitbang_i2c_gpio_set, 2);
+ qdev_init_gpio_out(dev, &s->out, 1);
+
+ return 0;
+}
+
+static void gpio_i2c_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = gpio_i2c_init;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "Virtual GPIO to I2C bridge";
+}
+
+static const TypeInfo gpio_i2c_info = {
+ .name = TYPE_GPIO_I2C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(GPIOI2CState),
+ .class_init = gpio_i2c_class_init,
+};
+
+static void bitbang_i2c_register_types(void)
+{
+ type_register_static(&gpio_i2c_info);
+}
+
+type_init(bitbang_i2c_register_types)
diff --git a/qemu/hw/i2c/bitbang_i2c.h b/qemu/hw/i2c/bitbang_i2c.h
new file mode 100644
index 000000000..3a7126d5d
--- /dev/null
+++ b/qemu/hw/i2c/bitbang_i2c.h
@@ -0,0 +1,14 @@
+#ifndef BITBANG_I2C_H
+#define BITBANG_I2C_H
+
+#include "hw/i2c/i2c.h"
+
+typedef struct bitbang_i2c_interface bitbang_i2c_interface;
+
+#define BITBANG_I2C_SDA 0
+#define BITBANG_I2C_SCL 1
+
+bitbang_i2c_interface *bitbang_i2c_init(I2CBus *bus);
+int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level);
+
+#endif
diff --git a/qemu/hw/i2c/core.c b/qemu/hw/i2c/core.c
new file mode 100644
index 000000000..5a6402634
--- /dev/null
+++ b/qemu/hw/i2c/core.c
@@ -0,0 +1,245 @@
+/*
+ * QEMU I2C bus interface.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+#include "hw/i2c/i2c.h"
+
+struct I2CBus
+{
+ BusState qbus;
+ I2CSlave *current_dev;
+ I2CSlave *dev;
+ uint8_t saved_address;
+};
+
+static Property i2c_props[] = {
+ DEFINE_PROP_UINT8("address", struct I2CSlave, address, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+#define TYPE_I2C_BUS "i2c-bus"
+#define I2C_BUS(obj) OBJECT_CHECK(I2CBus, (obj), TYPE_I2C_BUS)
+
+static const TypeInfo i2c_bus_info = {
+ .name = TYPE_I2C_BUS,
+ .parent = TYPE_BUS,
+ .instance_size = sizeof(I2CBus),
+};
+
+static void i2c_bus_pre_save(void *opaque)
+{
+ I2CBus *bus = opaque;
+
+ bus->saved_address = bus->current_dev ? bus->current_dev->address : -1;
+}
+
+static int i2c_bus_post_load(void *opaque, int version_id)
+{
+ I2CBus *bus = opaque;
+
+ /* The bus is loaded before attached devices, so load and save the
+ current device id. Devices will check themselves as loaded. */
+ bus->current_dev = NULL;
+ return 0;
+}
+
+static const VMStateDescription vmstate_i2c_bus = {
+ .name = "i2c_bus",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .pre_save = i2c_bus_pre_save,
+ .post_load = i2c_bus_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(saved_address, I2CBus),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/* Create a new I2C bus. */
+I2CBus *i2c_init_bus(DeviceState *parent, const char *name)
+{
+ I2CBus *bus;
+
+ bus = I2C_BUS(qbus_create(TYPE_I2C_BUS, parent, name));
+ vmstate_register(NULL, -1, &vmstate_i2c_bus, bus);
+ return bus;
+}
+
+void i2c_set_slave_address(I2CSlave *dev, uint8_t address)
+{
+ dev->address = address;
+}
+
+/* Return nonzero if bus is busy. */
+int i2c_bus_busy(I2CBus *bus)
+{
+ return bus->current_dev != NULL;
+}
+
+/* Returns non-zero if the address is not valid. */
+/* TODO: Make this handle multiple masters. */
+int i2c_start_transfer(I2CBus *bus, uint8_t address, int recv)
+{
+ BusChild *kid;
+ I2CSlave *slave = NULL;
+ I2CSlaveClass *sc;
+
+ QTAILQ_FOREACH(kid, &bus->qbus.children, sibling) {
+ DeviceState *qdev = kid->child;
+ I2CSlave *candidate = I2C_SLAVE(qdev);
+ if (candidate->address == address) {
+ slave = candidate;
+ break;
+ }
+ }
+
+ if (!slave) {
+ return 1;
+ }
+
+ sc = I2C_SLAVE_GET_CLASS(slave);
+ /* If the bus is already busy, assume this is a repeated
+ start condition. */
+ bus->current_dev = slave;
+ if (sc->event) {
+ sc->event(slave, recv ? I2C_START_RECV : I2C_START_SEND);
+ }
+ return 0;
+}
+
+void i2c_end_transfer(I2CBus *bus)
+{
+ I2CSlave *dev = bus->current_dev;
+ I2CSlaveClass *sc;
+
+ if (!dev) {
+ return;
+ }
+
+ sc = I2C_SLAVE_GET_CLASS(dev);
+ if (sc->event) {
+ sc->event(dev, I2C_FINISH);
+ }
+
+ bus->current_dev = NULL;
+}
+
+int i2c_send(I2CBus *bus, uint8_t data)
+{
+ I2CSlave *dev = bus->current_dev;
+ I2CSlaveClass *sc;
+
+ if (!dev) {
+ return -1;
+ }
+
+ sc = I2C_SLAVE_GET_CLASS(dev);
+ if (sc->send) {
+ return sc->send(dev, data);
+ }
+
+ return -1;
+}
+
+int i2c_recv(I2CBus *bus)
+{
+ I2CSlave *dev = bus->current_dev;
+ I2CSlaveClass *sc;
+
+ if (!dev) {
+ return -1;
+ }
+
+ sc = I2C_SLAVE_GET_CLASS(dev);
+ if (sc->recv) {
+ return sc->recv(dev);
+ }
+
+ return -1;
+}
+
+void i2c_nack(I2CBus *bus)
+{
+ I2CSlave *dev = bus->current_dev;
+ I2CSlaveClass *sc;
+
+ if (!dev) {
+ return;
+ }
+
+ sc = I2C_SLAVE_GET_CLASS(dev);
+ if (sc->event) {
+ sc->event(dev, I2C_NACK);
+ }
+}
+
+static int i2c_slave_post_load(void *opaque, int version_id)
+{
+ I2CSlave *dev = opaque;
+ I2CBus *bus;
+ bus = I2C_BUS(qdev_get_parent_bus(DEVICE(dev)));
+ if (bus->saved_address == dev->address) {
+ bus->current_dev = dev;
+ }
+ return 0;
+}
+
+const VMStateDescription vmstate_i2c_slave = {
+ .name = "I2CSlave",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = i2c_slave_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(address, I2CSlave),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int i2c_slave_qdev_init(DeviceState *dev)
+{
+ I2CSlave *s = I2C_SLAVE(dev);
+ I2CSlaveClass *sc = I2C_SLAVE_GET_CLASS(s);
+
+ return sc->init(s);
+}
+
+DeviceState *i2c_create_slave(I2CBus *bus, const char *name, uint8_t addr)
+{
+ DeviceState *dev;
+
+ dev = qdev_create(&bus->qbus, name);
+ qdev_prop_set_uint8(dev, "address", addr);
+ qdev_init_nofail(dev);
+ return dev;
+}
+
+static void i2c_slave_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *k = DEVICE_CLASS(klass);
+ k->init = i2c_slave_qdev_init;
+ set_bit(DEVICE_CATEGORY_MISC, k->categories);
+ k->bus_type = TYPE_I2C_BUS;
+ k->props = i2c_props;
+}
+
+static const TypeInfo i2c_slave_type_info = {
+ .name = TYPE_I2C_SLAVE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(I2CSlave),
+ .abstract = true,
+ .class_size = sizeof(I2CSlaveClass),
+ .class_init = i2c_slave_class_init,
+};
+
+static void i2c_slave_register_types(void)
+{
+ type_register_static(&i2c_bus_info);
+ type_register_static(&i2c_slave_type_info);
+}
+
+type_init(i2c_slave_register_types)
diff --git a/qemu/hw/i2c/exynos4210_i2c.c b/qemu/hw/i2c/exynos4210_i2c.c
new file mode 100644
index 000000000..fb99dfda1
--- /dev/null
+++ b/qemu/hw/i2c/exynos4210_i2c.c
@@ -0,0 +1,336 @@
+/*
+ * Exynos4210 I2C Bus Serial Interface Emulation
+ *
+ * Copyright (C) 2012 Samsung Electronics Co Ltd.
+ * Maksim Kozlov, <m.kozlov@samsung.com>
+ * Igor Mitsyanko, <i.mitsyanko@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/timer.h"
+#include "hw/sysbus.h"
+#include "hw/i2c/i2c.h"
+
+#ifndef EXYNOS4_I2C_DEBUG
+#define EXYNOS4_I2C_DEBUG 0
+#endif
+
+#define TYPE_EXYNOS4_I2C "exynos4210.i2c"
+#define EXYNOS4_I2C(obj) \
+ OBJECT_CHECK(Exynos4210I2CState, (obj), TYPE_EXYNOS4_I2C)
+
+/* Exynos4210 I2C memory map */
+#define EXYNOS4_I2C_MEM_SIZE 0x14
+#define I2CCON_ADDR 0x00 /* control register */
+#define I2CSTAT_ADDR 0x04 /* control/status register */
+#define I2CADD_ADDR 0x08 /* address register */
+#define I2CDS_ADDR 0x0c /* data shift register */
+#define I2CLC_ADDR 0x10 /* line control register */
+
+#define I2CCON_ACK_GEN (1 << 7)
+#define I2CCON_INTRS_EN (1 << 5)
+#define I2CCON_INT_PEND (1 << 4)
+
+#define EXYNOS4_I2C_MODE(reg) (((reg) >> 6) & 3)
+#define I2C_IN_MASTER_MODE(reg) (((reg) >> 6) & 2)
+#define I2CMODE_MASTER_Rx 0x2
+#define I2CMODE_MASTER_Tx 0x3
+#define I2CSTAT_LAST_BIT (1 << 0)
+#define I2CSTAT_OUTPUT_EN (1 << 4)
+#define I2CSTAT_START_BUSY (1 << 5)
+
+
+#if EXYNOS4_I2C_DEBUG
+#define DPRINT(fmt, args...) \
+ do { fprintf(stderr, "QEMU I2C: "fmt, ## args); } while (0)
+
+static const char *exynos4_i2c_get_regname(unsigned offset)
+{
+ switch (offset) {
+ case I2CCON_ADDR:
+ return "I2CCON";
+ case I2CSTAT_ADDR:
+ return "I2CSTAT";
+ case I2CADD_ADDR:
+ return "I2CADD";
+ case I2CDS_ADDR:
+ return "I2CDS";
+ case I2CLC_ADDR:
+ return "I2CLC";
+ default:
+ return "[?]";
+ }
+}
+
+#else
+#define DPRINT(fmt, args...) do { } while (0)
+#endif
+
+typedef struct Exynos4210I2CState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ I2CBus *bus;
+ qemu_irq irq;
+
+ uint8_t i2ccon;
+ uint8_t i2cstat;
+ uint8_t i2cadd;
+ uint8_t i2cds;
+ uint8_t i2clc;
+ bool scl_free;
+} Exynos4210I2CState;
+
+static inline void exynos4210_i2c_raise_interrupt(Exynos4210I2CState *s)
+{
+ if (s->i2ccon & I2CCON_INTRS_EN) {
+ s->i2ccon |= I2CCON_INT_PEND;
+ qemu_irq_raise(s->irq);
+ }
+}
+
+static void exynos4210_i2c_data_receive(void *opaque)
+{
+ Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
+ int ret;
+
+ s->i2cstat &= ~I2CSTAT_LAST_BIT;
+ s->scl_free = false;
+ ret = i2c_recv(s->bus);
+ if (ret < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
+ s->i2cstat |= I2CSTAT_LAST_BIT; /* Data is not acknowledged */
+ } else {
+ s->i2cds = ret;
+ }
+ exynos4210_i2c_raise_interrupt(s);
+}
+
+static void exynos4210_i2c_data_send(void *opaque)
+{
+ Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
+
+ s->i2cstat &= ~I2CSTAT_LAST_BIT;
+ s->scl_free = false;
+ if (i2c_send(s->bus, s->i2cds) < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
+ s->i2cstat |= I2CSTAT_LAST_BIT;
+ }
+ exynos4210_i2c_raise_interrupt(s);
+}
+
+static uint64_t exynos4210_i2c_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
+ uint8_t value;
+
+ switch (offset) {
+ case I2CCON_ADDR:
+ value = s->i2ccon;
+ break;
+ case I2CSTAT_ADDR:
+ value = s->i2cstat;
+ break;
+ case I2CADD_ADDR:
+ value = s->i2cadd;
+ break;
+ case I2CDS_ADDR:
+ value = s->i2cds;
+ s->scl_free = true;
+ if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx &&
+ (s->i2cstat & I2CSTAT_START_BUSY) &&
+ !(s->i2ccon & I2CCON_INT_PEND)) {
+ exynos4210_i2c_data_receive(s);
+ }
+ break;
+ case I2CLC_ADDR:
+ value = s->i2clc;
+ break;
+ default:
+ value = 0;
+ DPRINT("ERROR: Bad read offset 0x%x\n", (unsigned int)offset);
+ break;
+ }
+
+ DPRINT("read %s [0x%02x] -> 0x%02x\n", exynos4_i2c_get_regname(offset),
+ (unsigned int)offset, value);
+ return value;
+}
+
+static void exynos4210_i2c_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
+ uint8_t v = value & 0xff;
+
+ DPRINT("write %s [0x%02x] <- 0x%02x\n", exynos4_i2c_get_regname(offset),
+ (unsigned int)offset, v);
+
+ switch (offset) {
+ case I2CCON_ADDR:
+ s->i2ccon = (v & ~I2CCON_INT_PEND) | (s->i2ccon & I2CCON_INT_PEND);
+ if ((s->i2ccon & I2CCON_INT_PEND) && !(v & I2CCON_INT_PEND)) {
+ s->i2ccon &= ~I2CCON_INT_PEND;
+ qemu_irq_lower(s->irq);
+ if (!(s->i2ccon & I2CCON_INTRS_EN)) {
+ s->i2cstat &= ~I2CSTAT_START_BUSY;
+ }
+
+ if (s->i2cstat & I2CSTAT_START_BUSY) {
+ if (s->scl_free) {
+ if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx) {
+ exynos4210_i2c_data_send(s);
+ } else if (EXYNOS4_I2C_MODE(s->i2cstat) ==
+ I2CMODE_MASTER_Rx) {
+ exynos4210_i2c_data_receive(s);
+ }
+ } else {
+ s->i2ccon |= I2CCON_INT_PEND;
+ qemu_irq_raise(s->irq);
+ }
+ }
+ }
+ break;
+ case I2CSTAT_ADDR:
+ s->i2cstat =
+ (s->i2cstat & I2CSTAT_START_BUSY) | (v & ~I2CSTAT_START_BUSY);
+
+ if (!(s->i2cstat & I2CSTAT_OUTPUT_EN)) {
+ s->i2cstat &= ~I2CSTAT_START_BUSY;
+ s->scl_free = true;
+ qemu_irq_lower(s->irq);
+ break;
+ }
+
+ /* Nothing to do if in i2c slave mode */
+ if (!I2C_IN_MASTER_MODE(s->i2cstat)) {
+ break;
+ }
+
+ if (v & I2CSTAT_START_BUSY) {
+ s->i2cstat &= ~I2CSTAT_LAST_BIT;
+ s->i2cstat |= I2CSTAT_START_BUSY; /* Line is busy */
+ s->scl_free = false;
+
+ /* Generate start bit and send slave address */
+ if (i2c_start_transfer(s->bus, s->i2cds >> 1, s->i2cds & 0x1) &&
+ (s->i2ccon & I2CCON_ACK_GEN)) {
+ s->i2cstat |= I2CSTAT_LAST_BIT;
+ } else if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx) {
+ exynos4210_i2c_data_receive(s);
+ }
+ exynos4210_i2c_raise_interrupt(s);
+ } else {
+ i2c_end_transfer(s->bus);
+ if (!(s->i2ccon & I2CCON_INT_PEND)) {
+ s->i2cstat &= ~I2CSTAT_START_BUSY;
+ }
+ s->scl_free = true;
+ }
+ break;
+ case I2CADD_ADDR:
+ if ((s->i2cstat & I2CSTAT_OUTPUT_EN) == 0) {
+ s->i2cadd = v;
+ }
+ break;
+ case I2CDS_ADDR:
+ if (s->i2cstat & I2CSTAT_OUTPUT_EN) {
+ s->i2cds = v;
+ s->scl_free = true;
+ if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx &&
+ (s->i2cstat & I2CSTAT_START_BUSY) &&
+ !(s->i2ccon & I2CCON_INT_PEND)) {
+ exynos4210_i2c_data_send(s);
+ }
+ }
+ break;
+ case I2CLC_ADDR:
+ s->i2clc = v;
+ break;
+ default:
+ DPRINT("ERROR: Bad write offset 0x%x\n", (unsigned int)offset);
+ break;
+ }
+}
+
+static const MemoryRegionOps exynos4210_i2c_ops = {
+ .read = exynos4210_i2c_read,
+ .write = exynos4210_i2c_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static const VMStateDescription exynos4210_i2c_vmstate = {
+ .name = "exynos4210.i2c",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(i2ccon, Exynos4210I2CState),
+ VMSTATE_UINT8(i2cstat, Exynos4210I2CState),
+ VMSTATE_UINT8(i2cds, Exynos4210I2CState),
+ VMSTATE_UINT8(i2cadd, Exynos4210I2CState),
+ VMSTATE_UINT8(i2clc, Exynos4210I2CState),
+ VMSTATE_BOOL(scl_free, Exynos4210I2CState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void exynos4210_i2c_reset(DeviceState *d)
+{
+ Exynos4210I2CState *s = EXYNOS4_I2C(d);
+
+ s->i2ccon = 0x00;
+ s->i2cstat = 0x00;
+ s->i2cds = 0xFF;
+ s->i2clc = 0x00;
+ s->i2cadd = 0xFF;
+ s->scl_free = true;
+}
+
+static int exynos4210_i2c_realize(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ Exynos4210I2CState *s = EXYNOS4_I2C(dev);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &exynos4210_i2c_ops, s,
+ TYPE_EXYNOS4_I2C, EXYNOS4_I2C_MEM_SIZE);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(sbd, &s->irq);
+ s->bus = i2c_init_bus(dev, "i2c");
+ return 0;
+}
+
+static void exynos4210_i2c_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *sbdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ dc->vmsd = &exynos4210_i2c_vmstate;
+ dc->reset = exynos4210_i2c_reset;
+ sbdc->init = exynos4210_i2c_realize;
+}
+
+static const TypeInfo exynos4210_i2c_type_info = {
+ .name = TYPE_EXYNOS4_I2C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Exynos4210I2CState),
+ .class_init = exynos4210_i2c_class_init,
+};
+
+static void exynos4210_i2c_register_types(void)
+{
+ type_register_static(&exynos4210_i2c_type_info);
+}
+
+type_init(exynos4210_i2c_register_types)
diff --git a/qemu/hw/i2c/omap_i2c.c b/qemu/hw/i2c/omap_i2c.c
new file mode 100644
index 000000000..b6f544a22
--- /dev/null
+++ b/qemu/hw/i2c/omap_i2c.c
@@ -0,0 +1,504 @@
+/*
+ * TI OMAP on-chip I2C controller. Only "new I2C" mode supported.
+ *
+ * Copyright (C) 2007 Andrzej Zaborowski <balrog@zabor.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/arm/omap.h"
+#include "hw/sysbus.h"
+
+#define TYPE_OMAP_I2C "omap_i2c"
+#define OMAP_I2C(obj) OBJECT_CHECK(OMAPI2CState, (obj), TYPE_OMAP_I2C)
+
+typedef struct OMAPI2CState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ qemu_irq irq;
+ qemu_irq drq[2];
+ I2CBus *bus;
+
+ uint8_t revision;
+ void *iclk;
+ void *fclk;
+
+ uint8_t mask;
+ uint16_t stat;
+ uint16_t dma;
+ uint16_t count;
+ int count_cur;
+ uint32_t fifo;
+ int rxlen;
+ int txlen;
+ uint16_t control;
+ uint16_t addr[2];
+ uint8_t divider;
+ uint8_t times[2];
+ uint16_t test;
+} OMAPI2CState;
+
+#define OMAP2_INTR_REV 0x34
+#define OMAP2_GC_REV 0x34
+
+static void omap_i2c_interrupts_update(OMAPI2CState *s)
+{
+ qemu_set_irq(s->irq, s->stat & s->mask);
+ if ((s->dma >> 15) & 1) /* RDMA_EN */
+ qemu_set_irq(s->drq[0], (s->stat >> 3) & 1); /* RRDY */
+ if ((s->dma >> 7) & 1) /* XDMA_EN */
+ qemu_set_irq(s->drq[1], (s->stat >> 4) & 1); /* XRDY */
+}
+
+static void omap_i2c_fifo_run(OMAPI2CState *s)
+{
+ int ack = 1;
+
+ if (!i2c_bus_busy(s->bus))
+ return;
+
+ if ((s->control >> 2) & 1) { /* RM */
+ if ((s->control >> 1) & 1) { /* STP */
+ i2c_end_transfer(s->bus);
+ s->control &= ~(1 << 1); /* STP */
+ s->count_cur = s->count;
+ s->txlen = 0;
+ } else if ((s->control >> 9) & 1) { /* TRX */
+ while (ack && s->txlen)
+ ack = (i2c_send(s->bus,
+ (s->fifo >> ((-- s->txlen) << 3)) &
+ 0xff) >= 0);
+ s->stat |= 1 << 4; /* XRDY */
+ } else {
+ while (s->rxlen < 4)
+ s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
+ s->stat |= 1 << 3; /* RRDY */
+ }
+ } else {
+ if ((s->control >> 9) & 1) { /* TRX */
+ while (ack && s->count_cur && s->txlen) {
+ ack = (i2c_send(s->bus,
+ (s->fifo >> ((-- s->txlen) << 3)) &
+ 0xff) >= 0);
+ s->count_cur --;
+ }
+ if (ack && s->count_cur)
+ s->stat |= 1 << 4; /* XRDY */
+ else
+ s->stat &= ~(1 << 4); /* XRDY */
+ if (!s->count_cur) {
+ s->stat |= 1 << 2; /* ARDY */
+ s->control &= ~(1 << 10); /* MST */
+ }
+ } else {
+ while (s->count_cur && s->rxlen < 4) {
+ s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
+ s->count_cur --;
+ }
+ if (s->rxlen)
+ s->stat |= 1 << 3; /* RRDY */
+ else
+ s->stat &= ~(1 << 3); /* RRDY */
+ }
+ if (!s->count_cur) {
+ if ((s->control >> 1) & 1) { /* STP */
+ i2c_end_transfer(s->bus);
+ s->control &= ~(1 << 1); /* STP */
+ s->count_cur = s->count;
+ s->txlen = 0;
+ } else {
+ s->stat |= 1 << 2; /* ARDY */
+ s->control &= ~(1 << 10); /* MST */
+ }
+ }
+ }
+
+ s->stat |= (!ack) << 1; /* NACK */
+ if (!ack)
+ s->control &= ~(1 << 1); /* STP */
+}
+
+static void omap_i2c_reset(DeviceState *dev)
+{
+ OMAPI2CState *s = OMAP_I2C(dev);
+
+ s->mask = 0;
+ s->stat = 0;
+ s->dma = 0;
+ s->count = 0;
+ s->count_cur = 0;
+ s->fifo = 0;
+ s->rxlen = 0;
+ s->txlen = 0;
+ s->control = 0;
+ s->addr[0] = 0;
+ s->addr[1] = 0;
+ s->divider = 0;
+ s->times[0] = 0;
+ s->times[1] = 0;
+ s->test = 0;
+}
+
+static uint32_t omap_i2c_read(void *opaque, hwaddr addr)
+{
+ OMAPI2CState *s = opaque;
+ int offset = addr & OMAP_MPUI_REG_MASK;
+ uint16_t ret;
+
+ switch (offset) {
+ case 0x00: /* I2C_REV */
+ return s->revision; /* REV */
+
+ case 0x04: /* I2C_IE */
+ return s->mask;
+
+ case 0x08: /* I2C_STAT */
+ return s->stat | (i2c_bus_busy(s->bus) << 12);
+
+ case 0x0c: /* I2C_IV */
+ if (s->revision >= OMAP2_INTR_REV)
+ break;
+ ret = ctz32(s->stat & s->mask);
+ if (ret != 32) {
+ s->stat ^= 1 << ret;
+ ret++;
+ } else {
+ ret = 0;
+ }
+ omap_i2c_interrupts_update(s);
+ return ret;
+
+ case 0x10: /* I2C_SYSS */
+ return (s->control >> 15) & 1; /* I2C_EN */
+
+ case 0x14: /* I2C_BUF */
+ return s->dma;
+
+ case 0x18: /* I2C_CNT */
+ return s->count_cur; /* DCOUNT */
+
+ case 0x1c: /* I2C_DATA */
+ ret = 0;
+ if (s->control & (1 << 14)) { /* BE */
+ ret |= ((s->fifo >> 0) & 0xff) << 8;
+ ret |= ((s->fifo >> 8) & 0xff) << 0;
+ } else {
+ ret |= ((s->fifo >> 8) & 0xff) << 8;
+ ret |= ((s->fifo >> 0) & 0xff) << 0;
+ }
+ if (s->rxlen == 1) {
+ s->stat |= 1 << 15; /* SBD */
+ s->rxlen = 0;
+ } else if (s->rxlen > 1) {
+ if (s->rxlen > 2)
+ s->fifo >>= 16;
+ s->rxlen -= 2;
+ } else {
+ /* XXX: remote access (qualifier) error - what's that? */
+ }
+ if (!s->rxlen) {
+ s->stat &= ~(1 << 3); /* RRDY */
+ if (((s->control >> 10) & 1) && /* MST */
+ ((~s->control >> 9) & 1)) { /* TRX */
+ s->stat |= 1 << 2; /* ARDY */
+ s->control &= ~(1 << 10); /* MST */
+ }
+ }
+ s->stat &= ~(1 << 11); /* ROVR */
+ omap_i2c_fifo_run(s);
+ omap_i2c_interrupts_update(s);
+ return ret;
+
+ case 0x20: /* I2C_SYSC */
+ return 0;
+
+ case 0x24: /* I2C_CON */
+ return s->control;
+
+ case 0x28: /* I2C_OA */
+ return s->addr[0];
+
+ case 0x2c: /* I2C_SA */
+ return s->addr[1];
+
+ case 0x30: /* I2C_PSC */
+ return s->divider;
+
+ case 0x34: /* I2C_SCLL */
+ return s->times[0];
+
+ case 0x38: /* I2C_SCLH */
+ return s->times[1];
+
+ case 0x3c: /* I2C_SYSTEST */
+ if (s->test & (1 << 15)) { /* ST_EN */
+ s->test ^= 0xa;
+ return s->test;
+ } else
+ return s->test & ~0x300f;
+ }
+
+ OMAP_BAD_REG(addr);
+ return 0;
+}
+
+static void omap_i2c_write(void *opaque, hwaddr addr,
+ uint32_t value)
+{
+ OMAPI2CState *s = opaque;
+ int offset = addr & OMAP_MPUI_REG_MASK;
+ int nack;
+
+ switch (offset) {
+ case 0x00: /* I2C_REV */
+ case 0x0c: /* I2C_IV */
+ case 0x10: /* I2C_SYSS */
+ OMAP_RO_REG(addr);
+ return;
+
+ case 0x04: /* I2C_IE */
+ s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f);
+ break;
+
+ case 0x08: /* I2C_STAT */
+ if (s->revision < OMAP2_INTR_REV) {
+ OMAP_RO_REG(addr);
+ return;
+ }
+
+ /* RRDY and XRDY are reset by hardware. (in all versions???) */
+ s->stat &= ~(value & 0x27);
+ omap_i2c_interrupts_update(s);
+ break;
+
+ case 0x14: /* I2C_BUF */
+ s->dma = value & 0x8080;
+ if (value & (1 << 15)) /* RDMA_EN */
+ s->mask &= ~(1 << 3); /* RRDY_IE */
+ if (value & (1 << 7)) /* XDMA_EN */
+ s->mask &= ~(1 << 4); /* XRDY_IE */
+ break;
+
+ case 0x18: /* I2C_CNT */
+ s->count = value; /* DCOUNT */
+ break;
+
+ case 0x1c: /* I2C_DATA */
+ if (s->txlen > 2) {
+ /* XXX: remote access (qualifier) error - what's that? */
+ break;
+ }
+ s->fifo <<= 16;
+ s->txlen += 2;
+ if (s->control & (1 << 14)) { /* BE */
+ s->fifo |= ((value >> 8) & 0xff) << 8;
+ s->fifo |= ((value >> 0) & 0xff) << 0;
+ } else {
+ s->fifo |= ((value >> 0) & 0xff) << 8;
+ s->fifo |= ((value >> 8) & 0xff) << 0;
+ }
+ s->stat &= ~(1 << 10); /* XUDF */
+ if (s->txlen > 2)
+ s->stat &= ~(1 << 4); /* XRDY */
+ omap_i2c_fifo_run(s);
+ omap_i2c_interrupts_update(s);
+ break;
+
+ case 0x20: /* I2C_SYSC */
+ if (s->revision < OMAP2_INTR_REV) {
+ OMAP_BAD_REG(addr);
+ return;
+ }
+
+ if (value & 2) {
+ omap_i2c_reset(DEVICE(s));
+ }
+ break;
+
+ case 0x24: /* I2C_CON */
+ s->control = value & 0xcf87;
+ if (~value & (1 << 15)) { /* I2C_EN */
+ if (s->revision < OMAP2_INTR_REV) {
+ omap_i2c_reset(DEVICE(s));
+ }
+ break;
+ }
+ if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */
+ fprintf(stderr, "%s: I^2C slave mode not supported\n",
+ __FUNCTION__);
+ break;
+ }
+ if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */
+ fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
+ __FUNCTION__);
+ break;
+ }
+ if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */
+ nack = !!i2c_start_transfer(s->bus, s->addr[1], /* SA */
+ (~value >> 9) & 1); /* TRX */
+ s->stat |= nack << 1; /* NACK */
+ s->control &= ~(1 << 0); /* STT */
+ s->fifo = 0;
+ if (nack)
+ s->control &= ~(1 << 1); /* STP */
+ else {
+ s->count_cur = s->count;
+ omap_i2c_fifo_run(s);
+ }
+ omap_i2c_interrupts_update(s);
+ }
+ break;
+
+ case 0x28: /* I2C_OA */
+ s->addr[0] = value & 0x3ff;
+ break;
+
+ case 0x2c: /* I2C_SA */
+ s->addr[1] = value & 0x3ff;
+ break;
+
+ case 0x30: /* I2C_PSC */
+ s->divider = value;
+ break;
+
+ case 0x34: /* I2C_SCLL */
+ s->times[0] = value;
+ break;
+
+ case 0x38: /* I2C_SCLH */
+ s->times[1] = value;
+ break;
+
+ case 0x3c: /* I2C_SYSTEST */
+ s->test = value & 0xf80f;
+ if (value & (1 << 11)) /* SBB */
+ if (s->revision >= OMAP2_INTR_REV) {
+ s->stat |= 0x3f;
+ omap_i2c_interrupts_update(s);
+ }
+ if (value & (1 << 15)) /* ST_EN */
+ fprintf(stderr, "%s: System Test not supported\n", __FUNCTION__);
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+static void omap_i2c_writeb(void *opaque, hwaddr addr,
+ uint32_t value)
+{
+ OMAPI2CState *s = opaque;
+ int offset = addr & OMAP_MPUI_REG_MASK;
+
+ switch (offset) {
+ case 0x1c: /* I2C_DATA */
+ if (s->txlen > 2) {
+ /* XXX: remote access (qualifier) error - what's that? */
+ break;
+ }
+ s->fifo <<= 8;
+ s->txlen += 1;
+ s->fifo |= value & 0xff;
+ s->stat &= ~(1 << 10); /* XUDF */
+ if (s->txlen > 2)
+ s->stat &= ~(1 << 4); /* XRDY */
+ omap_i2c_fifo_run(s);
+ omap_i2c_interrupts_update(s);
+ break;
+
+ default:
+ OMAP_BAD_REG(addr);
+ return;
+ }
+}
+
+static const MemoryRegionOps omap_i2c_ops = {
+ .old_mmio = {
+ .read = {
+ omap_badwidth_read16,
+ omap_i2c_read,
+ omap_badwidth_read16,
+ },
+ .write = {
+ omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */
+ omap_i2c_write,
+ omap_badwidth_write16,
+ },
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int omap_i2c_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ OMAPI2CState *s = OMAP_I2C(dev);
+
+ if (!s->fclk) {
+ hw_error("omap_i2c: fclk not connected\n");
+ }
+ if (s->revision >= OMAP2_INTR_REV && !s->iclk) {
+ /* Note that OMAP1 doesn't have a separate interface clock */
+ hw_error("omap_i2c: iclk not connected\n");
+ }
+ sysbus_init_irq(sbd, &s->irq);
+ sysbus_init_irq(sbd, &s->drq[0]);
+ sysbus_init_irq(sbd, &s->drq[1]);
+ memory_region_init_io(&s->iomem, OBJECT(s), &omap_i2c_ops, s, "omap.i2c",
+ (s->revision < OMAP2_INTR_REV) ? 0x800 : 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+ s->bus = i2c_init_bus(dev, NULL);
+ return 0;
+}
+
+static Property omap_i2c_properties[] = {
+ DEFINE_PROP_UINT8("revision", OMAPI2CState, revision, 0),
+ DEFINE_PROP_PTR("iclk", OMAPI2CState, iclk),
+ DEFINE_PROP_PTR("fclk", OMAPI2CState, fclk),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap_i2c_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+ k->init = omap_i2c_init;
+ dc->props = omap_i2c_properties;
+ dc->reset = omap_i2c_reset;
+ /* Reason: pointer properties "iclk", "fclk" */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo omap_i2c_info = {
+ .name = TYPE_OMAP_I2C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(OMAPI2CState),
+ .class_init = omap_i2c_class_init,
+};
+
+static void omap_i2c_register_types(void)
+{
+ type_register_static(&omap_i2c_info);
+}
+
+I2CBus *omap_i2c_bus(DeviceState *omap_i2c)
+{
+ OMAPI2CState *s = OMAP_I2C(omap_i2c);
+ return s->bus;
+}
+
+type_init(omap_i2c_register_types)
diff --git a/qemu/hw/i2c/pm_smbus.c b/qemu/hw/i2c/pm_smbus.c
new file mode 100644
index 000000000..ce1713d26
--- /dev/null
+++ b/qemu/hw/i2c/pm_smbus.c
@@ -0,0 +1,227 @@
+/*
+ * PC SMBus implementation
+ * splitted from acpi.c
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see
+ * <http://www.gnu.org/licenses/>.
+ */
+#include "hw/hw.h"
+#include "hw/i386/pc.h"
+#include "hw/i2c/pm_smbus.h"
+#include "hw/i2c/smbus.h"
+
+/* no save/load? */
+
+#define SMBHSTSTS 0x00
+#define SMBHSTCNT 0x02
+#define SMBHSTCMD 0x03
+#define SMBHSTADD 0x04
+#define SMBHSTDAT0 0x05
+#define SMBHSTDAT1 0x06
+#define SMBBLKDAT 0x07
+
+#define STS_HOST_BUSY (1)
+#define STS_INTR (1<<1)
+#define STS_DEV_ERR (1<<2)
+#define STS_BUS_ERR (1<<3)
+#define STS_FAILED (1<<4)
+#define STS_SMBALERT (1<<5)
+#define STS_INUSE_STS (1<<6)
+#define STS_BYTE_DONE (1<<7)
+/* Signs of successfully transaction end :
+* ByteDoneStatus = 1 (STS_BYTE_DONE) and INTR = 1 (STS_INTR )
+*/
+
+//#define DEBUG
+
+#ifdef DEBUG
+# define SMBUS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
+#else
+# define SMBUS_DPRINTF(format, ...) do { } while (0)
+#endif
+
+
+static void smb_transaction(PMSMBus *s)
+{
+ uint8_t prot = (s->smb_ctl >> 2) & 0x07;
+ uint8_t read = s->smb_addr & 0x01;
+ uint8_t cmd = s->smb_cmd;
+ uint8_t addr = s->smb_addr >> 1;
+ I2CBus *bus = s->smbus;
+ int ret;
+
+ SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot);
+ /* Transaction isn't exec if STS_DEV_ERR bit set */
+ if ((s->smb_stat & STS_DEV_ERR) != 0) {
+ goto error;
+ }
+ switch(prot) {
+ case 0x0:
+ ret = smbus_quick_command(bus, addr, read);
+ goto done;
+ case 0x1:
+ if (read) {
+ ret = smbus_receive_byte(bus, addr);
+ goto data8;
+ } else {
+ ret = smbus_send_byte(bus, addr, cmd);
+ goto done;
+ }
+ case 0x2:
+ if (read) {
+ ret = smbus_read_byte(bus, addr, cmd);
+ goto data8;
+ } else {
+ ret = smbus_write_byte(bus, addr, cmd, s->smb_data0);
+ goto done;
+ }
+ break;
+ case 0x3:
+ if (read) {
+ ret = smbus_read_word(bus, addr, cmd);
+ goto data16;
+ } else {
+ ret = smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0);
+ goto done;
+ }
+ break;
+ case 0x5:
+ if (read) {
+ ret = smbus_read_block(bus, addr, cmd, s->smb_data);
+ goto data8;
+ } else {
+ ret = smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0);
+ goto done;
+ }
+ break;
+ default:
+ goto error;
+ }
+ abort();
+
+data16:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_data1 = ret >> 8;
+data8:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_data0 = ret;
+done:
+ if (ret < 0) {
+ goto error;
+ }
+ s->smb_stat |= STS_BYTE_DONE | STS_INTR;
+ return;
+
+error:
+ s->smb_stat |= STS_DEV_ERR;
+ return;
+
+}
+
+static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val,
+ unsigned width)
+{
+ PMSMBus *s = opaque;
+
+ SMBUS_DPRINTF("SMB writeb port=0x%04" HWADDR_PRIx
+ " val=0x%02" PRIx64 "\n", addr, val);
+ switch(addr) {
+ case SMBHSTSTS:
+ s->smb_stat = (~(val & 0xff)) & s->smb_stat;
+ s->smb_index = 0;
+ break;
+ case SMBHSTCNT:
+ s->smb_ctl = val;
+ if (val & 0x40)
+ smb_transaction(s);
+ break;
+ case SMBHSTCMD:
+ s->smb_cmd = val;
+ break;
+ case SMBHSTADD:
+ s->smb_addr = val;
+ break;
+ case SMBHSTDAT0:
+ s->smb_data0 = val;
+ break;
+ case SMBHSTDAT1:
+ s->smb_data1 = val;
+ break;
+ case SMBBLKDAT:
+ s->smb_data[s->smb_index++] = val;
+ if (s->smb_index > 31)
+ s->smb_index = 0;
+ break;
+ default:
+ break;
+ }
+}
+
+static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width)
+{
+ PMSMBus *s = opaque;
+ uint32_t val;
+
+ switch(addr) {
+ case SMBHSTSTS:
+ val = s->smb_stat;
+ break;
+ case SMBHSTCNT:
+ s->smb_index = 0;
+ val = s->smb_ctl & 0x1f;
+ break;
+ case SMBHSTCMD:
+ val = s->smb_cmd;
+ break;
+ case SMBHSTADD:
+ val = s->smb_addr;
+ break;
+ case SMBHSTDAT0:
+ val = s->smb_data0;
+ break;
+ case SMBHSTDAT1:
+ val = s->smb_data1;
+ break;
+ case SMBBLKDAT:
+ val = s->smb_data[s->smb_index++];
+ if (s->smb_index > 31)
+ s->smb_index = 0;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ SMBUS_DPRINTF("SMB readb port=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val);
+ return val;
+}
+
+static const MemoryRegionOps pm_smbus_ops = {
+ .read = smb_ioport_readb,
+ .write = smb_ioport_writeb,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 1,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+void pm_smbus_init(DeviceState *parent, PMSMBus *smb)
+{
+ smb->smbus = i2c_init_bus(parent, "i2c");
+ memory_region_init_io(&smb->io, OBJECT(parent), &pm_smbus_ops, smb,
+ "pm-smbus", 64);
+}
diff --git a/qemu/hw/i2c/smbus.c b/qemu/hw/i2c/smbus.c
new file mode 100644
index 000000000..6e27ae8bd
--- /dev/null
+++ b/qemu/hw/i2c/smbus.c
@@ -0,0 +1,361 @@
+/*
+ * QEMU SMBus device emulation.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+/* TODO: Implement PEC. */
+
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus.h"
+
+//#define DEBUG_SMBUS 1
+
+#ifdef DEBUG_SMBUS
+#define DPRINTF(fmt, ...) \
+do { printf("smbus(%02x): " fmt , dev->i2c.address, ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "smbus: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "smbus: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+enum {
+ SMBUS_IDLE,
+ SMBUS_WRITE_DATA,
+ SMBUS_RECV_BYTE,
+ SMBUS_READ_DATA,
+ SMBUS_DONE,
+ SMBUS_CONFUSED = -1
+};
+
+static void smbus_do_quick_cmd(SMBusDevice *dev, int recv)
+{
+ SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev);
+
+ DPRINTF("Quick Command %d\n", recv);
+ if (sc->quick_cmd) {
+ sc->quick_cmd(dev, recv);
+ }
+}
+
+static void smbus_do_write(SMBusDevice *dev)
+{
+ SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev);
+
+ if (dev->data_len == 0) {
+ smbus_do_quick_cmd(dev, 0);
+ } else if (dev->data_len == 1) {
+ DPRINTF("Send Byte\n");
+ if (sc->send_byte) {
+ sc->send_byte(dev, dev->data_buf[0]);
+ }
+ } else {
+ dev->command = dev->data_buf[0];
+ DPRINTF("Command %d len %d\n", dev->command, dev->data_len - 1);
+ if (sc->write_data) {
+ sc->write_data(dev, dev->command, dev->data_buf + 1,
+ dev->data_len - 1);
+ }
+ }
+}
+
+static void smbus_i2c_event(I2CSlave *s, enum i2c_event event)
+{
+ SMBusDevice *dev = SMBUS_DEVICE(s);
+
+ switch (event) {
+ case I2C_START_SEND:
+ switch (dev->mode) {
+ case SMBUS_IDLE:
+ DPRINTF("Incoming data\n");
+ dev->mode = SMBUS_WRITE_DATA;
+ break;
+ default:
+ BADF("Unexpected send start condition in state %d\n", dev->mode);
+ dev->mode = SMBUS_CONFUSED;
+ break;
+ }
+ break;
+
+ case I2C_START_RECV:
+ switch (dev->mode) {
+ case SMBUS_IDLE:
+ DPRINTF("Read mode\n");
+ dev->mode = SMBUS_RECV_BYTE;
+ break;
+ case SMBUS_WRITE_DATA:
+ if (dev->data_len == 0) {
+ BADF("Read after write with no data\n");
+ dev->mode = SMBUS_CONFUSED;
+ } else {
+ if (dev->data_len > 1) {
+ smbus_do_write(dev);
+ } else {
+ dev->command = dev->data_buf[0];
+ DPRINTF("%02x: Command %d\n", dev->i2c.address,
+ dev->command);
+ }
+ DPRINTF("Read mode\n");
+ dev->data_len = 0;
+ dev->mode = SMBUS_READ_DATA;
+ }
+ break;
+ default:
+ BADF("Unexpected recv start condition in state %d\n", dev->mode);
+ dev->mode = SMBUS_CONFUSED;
+ break;
+ }
+ break;
+
+ case I2C_FINISH:
+ switch (dev->mode) {
+ case SMBUS_WRITE_DATA:
+ smbus_do_write(dev);
+ break;
+ case SMBUS_RECV_BYTE:
+ smbus_do_quick_cmd(dev, 1);
+ break;
+ case SMBUS_READ_DATA:
+ BADF("Unexpected stop during receive\n");
+ break;
+ default:
+ /* Nothing to do. */
+ break;
+ }
+ dev->mode = SMBUS_IDLE;
+ dev->data_len = 0;
+ break;
+
+ case I2C_NACK:
+ switch (dev->mode) {
+ case SMBUS_DONE:
+ /* Nothing to do. */
+ break;
+ case SMBUS_READ_DATA:
+ dev->mode = SMBUS_DONE;
+ break;
+ default:
+ BADF("Unexpected NACK in state %d\n", dev->mode);
+ dev->mode = SMBUS_CONFUSED;
+ break;
+ }
+ }
+}
+
+static int smbus_i2c_recv(I2CSlave *s)
+{
+ SMBusDevice *dev = SMBUS_DEVICE(s);
+ SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev);
+ int ret;
+
+ switch (dev->mode) {
+ case SMBUS_RECV_BYTE:
+ if (sc->receive_byte) {
+ ret = sc->receive_byte(dev);
+ } else {
+ ret = 0;
+ }
+ DPRINTF("Receive Byte %02x\n", ret);
+ dev->mode = SMBUS_DONE;
+ break;
+ case SMBUS_READ_DATA:
+ if (sc->read_data) {
+ ret = sc->read_data(dev, dev->command, dev->data_len);
+ dev->data_len++;
+ } else {
+ ret = 0;
+ }
+ DPRINTF("Read data %02x\n", ret);
+ break;
+ default:
+ BADF("Unexpected read in state %d\n", dev->mode);
+ dev->mode = SMBUS_CONFUSED;
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+static int smbus_i2c_send(I2CSlave *s, uint8_t data)
+{
+ SMBusDevice *dev = SMBUS_DEVICE(s);
+
+ switch (dev->mode) {
+ case SMBUS_WRITE_DATA:
+ DPRINTF("Write data %02x\n", data);
+ dev->data_buf[dev->data_len++] = data;
+ break;
+ default:
+ BADF("Unexpected write in state %d\n", dev->mode);
+ break;
+ }
+ return 0;
+}
+
+static int smbus_device_init(I2CSlave *i2c)
+{
+ SMBusDevice *dev = SMBUS_DEVICE(i2c);
+ SMBusDeviceClass *sc = SMBUS_DEVICE_GET_CLASS(dev);
+
+ return sc->init(dev);
+}
+
+/* Master device commands. */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
+{
+ if (i2c_start_transfer(bus, addr, read)) {
+ return -1;
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_receive_byte(I2CBus *bus, uint8_t addr)
+{
+ uint8_t data;
+
+ if (i2c_start_transfer(bus, addr, 1)) {
+ return -1;
+ }
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint8_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_start_transfer(bus, addr, 1);
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint16_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_start_transfer(bus, addr, 1);
+ data = i2c_recv(bus);
+ data |= i2c_recv(bus) << 8;
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data & 0xff);
+ i2c_send(bus, data >> 8);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data)
+{
+ int len;
+ int i;
+
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_start_transfer(bus, addr, 1);
+ len = i2c_recv(bus);
+ if (len > 32) {
+ len = 0;
+ }
+ for (i = 0; i < len; i++) {
+ data[i] = i2c_recv(bus);
+ }
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return len;
+}
+
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len)
+{
+ int i;
+
+ if (len > 32)
+ len = 32;
+
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, len);
+ for (i = 0; i < len; i++) {
+ i2c_send(bus, data[i]);
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+static void smbus_device_class_init(ObjectClass *klass, void *data)
+{
+ I2CSlaveClass *sc = I2C_SLAVE_CLASS(klass);
+
+ sc->init = smbus_device_init;
+ sc->event = smbus_i2c_event;
+ sc->recv = smbus_i2c_recv;
+ sc->send = smbus_i2c_send;
+}
+
+static const TypeInfo smbus_device_type_info = {
+ .name = TYPE_SMBUS_DEVICE,
+ .parent = TYPE_I2C_SLAVE,
+ .instance_size = sizeof(SMBusDevice),
+ .abstract = true,
+ .class_size = sizeof(SMBusDeviceClass),
+ .class_init = smbus_device_class_init,
+};
+
+static void smbus_device_register_types(void)
+{
+ type_register_static(&smbus_device_type_info);
+}
+
+type_init(smbus_device_register_types)
diff --git a/qemu/hw/i2c/smbus_eeprom.c b/qemu/hw/i2c/smbus_eeprom.c
new file mode 100644
index 000000000..72c09cba6
--- /dev/null
+++ b/qemu/hw/i2c/smbus_eeprom.c
@@ -0,0 +1,158 @@
+/*
+ * QEMU SMBus EEPROM device
+ *
+ * Copyright (c) 2007 Arastra, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus.h"
+
+//#define DEBUG
+
+typedef struct SMBusEEPROMDevice {
+ SMBusDevice smbusdev;
+ void *data;
+ uint8_t offset;
+} SMBusEEPROMDevice;
+
+static void eeprom_quick_cmd(SMBusDevice *dev, uint8_t read)
+{
+#ifdef DEBUG
+ printf("eeprom_quick_cmd: addr=0x%02x read=%d\n", dev->i2c.address, read);
+#endif
+}
+
+static void eeprom_send_byte(SMBusDevice *dev, uint8_t val)
+{
+ SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+#ifdef DEBUG
+ printf("eeprom_send_byte: addr=0x%02x val=0x%02x\n",
+ dev->i2c.address, val);
+#endif
+ eeprom->offset = val;
+}
+
+static uint8_t eeprom_receive_byte(SMBusDevice *dev)
+{
+ SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+ uint8_t *data = eeprom->data;
+ uint8_t val = data[eeprom->offset++];
+#ifdef DEBUG
+ printf("eeprom_receive_byte: addr=0x%02x val=0x%02x\n",
+ dev->i2c.address, val);
+#endif
+ return val;
+}
+
+static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len)
+{
+ SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+ int n;
+#ifdef DEBUG
+ printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",
+ dev->i2c.address, cmd, buf[0]);
+#endif
+ /* A page write operation is not a valid SMBus command.
+ It is a block write without a length byte. Fortunately we
+ get the full block anyway. */
+ /* TODO: Should this set the current location? */
+ if (cmd + len > 256)
+ n = 256 - cmd;
+ else
+ n = len;
+ memcpy(eeprom->data + cmd, buf, n);
+ len -= n;
+ if (len)
+ memcpy(eeprom->data, buf + n, len);
+}
+
+static uint8_t eeprom_read_data(SMBusDevice *dev, uint8_t cmd, int n)
+{
+ SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;
+ /* If this is the first byte then set the current position. */
+ if (n == 0)
+ eeprom->offset = cmd;
+ /* As with writes, we implement block reads without the
+ SMBus length byte. */
+ return eeprom_receive_byte(dev);
+}
+
+static int smbus_eeprom_initfn(SMBusDevice *dev)
+{
+ SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *)dev;
+
+ eeprom->offset = 0;
+ return 0;
+}
+
+static Property smbus_eeprom_properties[] = {
+ DEFINE_PROP_PTR("data", SMBusEEPROMDevice, data),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void smbus_eeprom_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SMBusDeviceClass *sc = SMBUS_DEVICE_CLASS(klass);
+
+ sc->init = smbus_eeprom_initfn;
+ sc->quick_cmd = eeprom_quick_cmd;
+ sc->send_byte = eeprom_send_byte;
+ sc->receive_byte = eeprom_receive_byte;
+ sc->write_data = eeprom_write_data;
+ sc->read_data = eeprom_read_data;
+ dc->props = smbus_eeprom_properties;
+ /* Reason: pointer property "data" */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo smbus_eeprom_info = {
+ .name = "smbus-eeprom",
+ .parent = TYPE_SMBUS_DEVICE,
+ .instance_size = sizeof(SMBusEEPROMDevice),
+ .class_init = smbus_eeprom_class_initfn,
+};
+
+static void smbus_eeprom_register_types(void)
+{
+ type_register_static(&smbus_eeprom_info);
+}
+
+type_init(smbus_eeprom_register_types)
+
+void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom,
+ const uint8_t *eeprom_spd, int eeprom_spd_size)
+{
+ int i;
+ uint8_t *eeprom_buf = g_malloc0(8 * 256); /* XXX: make this persistent */
+ if (eeprom_spd_size > 0) {
+ memcpy(eeprom_buf, eeprom_spd, eeprom_spd_size);
+ }
+
+ for (i = 0; i < nb_eeprom; i++) {
+ DeviceState *eeprom;
+ eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
+ qdev_prop_set_uint8(eeprom, "address", 0x50 + i);
+ qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
+ qdev_init_nofail(eeprom);
+ }
+}
diff --git a/qemu/hw/i2c/smbus_ich9.c b/qemu/hw/i2c/smbus_ich9.c
new file mode 100644
index 000000000..91d4d322c
--- /dev/null
+++ b/qemu/hw/i2c/smbus_ich9.c
@@ -0,0 +1,129 @@
+/*
+ * ACPI implementation
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ * Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
+ * VA Linux Systems Japan K.K.
+ * Copyright (C) 2012 Jason Baron <jbaron@redhat.com>
+ *
+ * This is based on acpi.c, but heavily rewritten.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License version 2 as published by the Free Software Foundation.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ *
+ */
+#include "hw/hw.h"
+#include "hw/i386/pc.h"
+#include "hw/i2c/pm_smbus.h"
+#include "hw/pci/pci.h"
+#include "sysemu/sysemu.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus.h"
+
+#include "hw/i386/ich9.h"
+
+#define TYPE_ICH9_SMB_DEVICE "ICH9 SMB"
+#define ICH9_SMB_DEVICE(obj) \
+ OBJECT_CHECK(ICH9SMBState, (obj), TYPE_ICH9_SMB_DEVICE)
+
+typedef struct ICH9SMBState {
+ PCIDevice dev;
+
+ PMSMBus smb;
+} ICH9SMBState;
+
+static const VMStateDescription vmstate_ich9_smbus = {
+ .name = "ich9_smb",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(dev, struct ICH9SMBState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void ich9_smbus_write_config(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ ICH9SMBState *s = ICH9_SMB_DEVICE(d);
+
+ pci_default_write_config(d, address, val, len);
+ if (range_covers_byte(address, len, ICH9_SMB_HOSTC)) {
+ uint8_t hostc = s->dev.config[ICH9_SMB_HOSTC];
+ if ((hostc & ICH9_SMB_HOSTC_HST_EN) &&
+ !(hostc & ICH9_SMB_HOSTC_I2C_EN)) {
+ memory_region_set_enabled(&s->smb.io, true);
+ } else {
+ memory_region_set_enabled(&s->smb.io, false);
+ }
+ }
+}
+
+static void ich9_smbus_realize(PCIDevice *d, Error **errp)
+{
+ ICH9SMBState *s = ICH9_SMB_DEVICE(d);
+
+ /* TODO? D31IP.SMIP in chipset configuration space */
+ pci_config_set_interrupt_pin(d->config, 0x01); /* interrupt pin 1 */
+
+ pci_set_byte(d->config + ICH9_SMB_HOSTC, 0);
+ /* TODO bar0, bar1: 64bit BAR support*/
+
+ pm_smbus_init(&d->qdev, &s->smb);
+ pci_register_bar(d, ICH9_SMB_SMB_BASE_BAR, PCI_BASE_ADDRESS_SPACE_IO,
+ &s->smb.io);
+}
+
+static void ich9_smb_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = PCI_DEVICE_ID_INTEL_ICH9_6;
+ k->revision = ICH9_A2_SMB_REVISION;
+ k->class_id = PCI_CLASS_SERIAL_SMBUS;
+ dc->vmsd = &vmstate_ich9_smbus;
+ dc->desc = "ICH9 SMBUS Bridge";
+ k->realize = ich9_smbus_realize;
+ k->config_write = ich9_smbus_write_config;
+ /*
+ * Reason: part of ICH9 southbridge, needs to be wired up by
+ * pc_q35_init()
+ */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+I2CBus *ich9_smb_init(PCIBus *bus, int devfn, uint32_t smb_io_base)
+{
+ PCIDevice *d =
+ pci_create_simple_multifunction(bus, devfn, true, TYPE_ICH9_SMB_DEVICE);
+ ICH9SMBState *s = ICH9_SMB_DEVICE(d);
+ return s->smb.smbus;
+}
+
+static const TypeInfo ich9_smb_info = {
+ .name = TYPE_ICH9_SMB_DEVICE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(ICH9SMBState),
+ .class_init = ich9_smb_class_init,
+};
+
+static void ich9_smb_register(void)
+{
+ type_register_static(&ich9_smb_info);
+}
+
+type_init(ich9_smb_register);
diff --git a/qemu/hw/i2c/versatile_i2c.c b/qemu/hw/i2c/versatile_i2c.c
new file mode 100644
index 000000000..3c0c2c106
--- /dev/null
+++ b/qemu/hw/i2c/versatile_i2c.c
@@ -0,0 +1,113 @@
+/*
+ * ARM Versatile I2C controller
+ *
+ * Copyright (c) 2006-2007 CodeSourcery.
+ * Copyright (c) 2012 Oskar Andero <oskar.andero@gmail.com>
+ *
+ * This file is derived from hw/realview.c by Paul Brook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "hw/sysbus.h"
+#include "bitbang_i2c.h"
+
+#define TYPE_VERSATILE_I2C "versatile_i2c"
+#define VERSATILE_I2C(obj) \
+ OBJECT_CHECK(VersatileI2CState, (obj), TYPE_VERSATILE_I2C)
+
+typedef struct VersatileI2CState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion iomem;
+ bitbang_i2c_interface *bitbang;
+ int out;
+ int in;
+} VersatileI2CState;
+
+static uint64_t versatile_i2c_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ VersatileI2CState *s = (VersatileI2CState *)opaque;
+
+ if (offset == 0) {
+ return (s->out & 1) | (s->in << 1);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%x\n", __func__, (int)offset);
+ return -1;
+ }
+}
+
+static void versatile_i2c_write(void *opaque, hwaddr offset,
+ uint64_t value, unsigned size)
+{
+ VersatileI2CState *s = (VersatileI2CState *)opaque;
+
+ switch (offset) {
+ case 0:
+ s->out |= value & 3;
+ break;
+ case 4:
+ s->out &= ~value;
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bad offset 0x%x\n", __func__, (int)offset);
+ }
+ bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
+ s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
+}
+
+static const MemoryRegionOps versatile_i2c_ops = {
+ .read = versatile_i2c_read,
+ .write = versatile_i2c_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int versatile_i2c_init(SysBusDevice *sbd)
+{
+ DeviceState *dev = DEVICE(sbd);
+ VersatileI2CState *s = VERSATILE_I2C(dev);
+ I2CBus *bus;
+
+ bus = i2c_init_bus(dev, "i2c");
+ s->bitbang = bitbang_i2c_init(bus);
+ memory_region_init_io(&s->iomem, OBJECT(s), &versatile_i2c_ops, s,
+ "versatile_i2c", 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+ return 0;
+}
+
+static void versatile_i2c_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = versatile_i2c_init;
+}
+
+static const TypeInfo versatile_i2c_info = {
+ .name = TYPE_VERSATILE_I2C,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(VersatileI2CState),
+ .class_init = versatile_i2c_class_init,
+};
+
+static void versatile_i2c_register_types(void)
+{
+ type_register_static(&versatile_i2c_info);
+}
+
+type_init(versatile_i2c_register_types)