diff options
Diffstat (limited to 'qemu/hw/dma/bcm2835_dma.c')
| -rw-r--r-- | qemu/hw/dma/bcm2835_dma.c | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/qemu/hw/dma/bcm2835_dma.c b/qemu/hw/dma/bcm2835_dma.c new file mode 100644 index 000000000..542117599 --- /dev/null +++ b/qemu/hw/dma/bcm2835_dma.c @@ -0,0 +1,409 @@ +/* + * Raspberry Pi emulation (c) 2012 Gregory Estrade + * This code is licensed under the GNU GPLv2 and later. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/dma/bcm2835_dma.h" + +/* DMA CS Control and Status bits */ +#define BCM2708_DMA_ACTIVE (1 << 0) +#define BCM2708_DMA_END (1 << 1) /* GE */ +#define BCM2708_DMA_INT (1 << 2) +#define BCM2708_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */ +#define BCM2708_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */ +#define BCM2708_DMA_ERR (1 << 8) +#define BCM2708_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */ +#define BCM2708_DMA_RESET (1 << 31) /* WO, self clearing */ + +/* DMA control block "info" field bits */ +#define BCM2708_DMA_INT_EN (1 << 0) +#define BCM2708_DMA_TDMODE (1 << 1) +#define BCM2708_DMA_WAIT_RESP (1 << 3) +#define BCM2708_DMA_D_INC (1 << 4) +#define BCM2708_DMA_D_WIDTH (1 << 5) +#define BCM2708_DMA_D_DREQ (1 << 6) +#define BCM2708_DMA_D_IGNORE (1 << 7) +#define BCM2708_DMA_S_INC (1 << 8) +#define BCM2708_DMA_S_WIDTH (1 << 9) +#define BCM2708_DMA_S_DREQ (1 << 10) +#define BCM2708_DMA_S_IGNORE (1 << 11) + +/* Register offsets */ +#define BCM2708_DMA_CS 0x00 /* Control and Status */ +#define BCM2708_DMA_ADDR 0x04 /* Control block address */ +/* the current control block appears in the following registers - read only */ +#define BCM2708_DMA_INFO 0x08 +#define BCM2708_DMA_SOURCE_AD 0x0c +#define BCM2708_DMA_DEST_AD 0x10 +#define BCM2708_DMA_TXFR_LEN 0x14 +#define BCM2708_DMA_STRIDE 0x18 +#define BCM2708_DMA_NEXTCB 0x1C +#define BCM2708_DMA_DEBUG 0x20 + +#define BCM2708_DMA_INT_STATUS 0xfe0 /* Interrupt status of each channel */ +#define BCM2708_DMA_ENABLE 0xff0 /* Global enable bits for each channel */ + +#define BCM2708_DMA_CS_RW_MASK 0x30ff0001 /* All RW bits in DMA_CS */ + +static void bcm2835_dma_update(BCM2835DMAState *s, unsigned c) +{ + BCM2835DMAChan *ch = &s->chan[c]; + uint32_t data, xlen, ylen; + int16_t dst_stride, src_stride; + + if (!(s->enable & (1 << c))) { + return; + } + + while ((s->enable & (1 << c)) && (ch->conblk_ad != 0)) { + /* CB fetch */ + ch->ti = ldl_le_phys(&s->dma_as, ch->conblk_ad); + ch->source_ad = ldl_le_phys(&s->dma_as, ch->conblk_ad + 4); + ch->dest_ad = ldl_le_phys(&s->dma_as, ch->conblk_ad + 8); + ch->txfr_len = ldl_le_phys(&s->dma_as, ch->conblk_ad + 12); + ch->stride = ldl_le_phys(&s->dma_as, ch->conblk_ad + 16); + ch->nextconbk = ldl_le_phys(&s->dma_as, ch->conblk_ad + 20); + + if (ch->ti & BCM2708_DMA_TDMODE) { + /* 2D transfer mode */ + ylen = (ch->txfr_len >> 16) & 0x3fff; + xlen = ch->txfr_len & 0xffff; + dst_stride = ch->stride >> 16; + src_stride = ch->stride & 0xffff; + } else { + ylen = 1; + xlen = ch->txfr_len; + dst_stride = 0; + src_stride = 0; + } + + while (ylen != 0) { + /* Normal transfer mode */ + while (xlen != 0) { + if (ch->ti & BCM2708_DMA_S_IGNORE) { + /* Ignore reads */ + data = 0; + } else { + data = ldl_le_phys(&s->dma_as, ch->source_ad); + } + if (ch->ti & BCM2708_DMA_S_INC) { + ch->source_ad += 4; + } + + if (ch->ti & BCM2708_DMA_D_IGNORE) { + /* Ignore writes */ + } else { + stl_le_phys(&s->dma_as, ch->dest_ad, data); + } + if (ch->ti & BCM2708_DMA_D_INC) { + ch->dest_ad += 4; + } + + /* update remaining transfer length */ + xlen -= 4; + if (ch->ti & BCM2708_DMA_TDMODE) { + ch->txfr_len = (ylen << 16) | xlen; + } else { + ch->txfr_len = xlen; + } + } + + if (--ylen != 0) { + ch->source_ad += src_stride; + ch->dest_ad += dst_stride; + } + } + ch->cs |= BCM2708_DMA_END; + if (ch->ti & BCM2708_DMA_INT_EN) { + ch->cs |= BCM2708_DMA_INT; + s->int_status |= (1 << c); + qemu_set_irq(ch->irq, 1); + } + + /* Process next CB */ + ch->conblk_ad = ch->nextconbk; + } + + ch->cs &= ~BCM2708_DMA_ACTIVE; + ch->cs |= BCM2708_DMA_ISPAUSED; +} + +static void bcm2835_dma_chan_reset(BCM2835DMAChan *ch) +{ + ch->cs = 0; + ch->conblk_ad = 0; +} + +static uint64_t bcm2835_dma_read(BCM2835DMAState *s, hwaddr offset, + unsigned size, unsigned c) +{ + BCM2835DMAChan *ch; + uint32_t res = 0; + + assert(size == 4); + assert(c < BCM2835_DMA_NCHANS); + + ch = &s->chan[c]; + + switch (offset) { + case BCM2708_DMA_CS: + res = ch->cs; + break; + case BCM2708_DMA_ADDR: + res = ch->conblk_ad; + break; + case BCM2708_DMA_INFO: + res = ch->ti; + break; + case BCM2708_DMA_SOURCE_AD: + res = ch->source_ad; + break; + case BCM2708_DMA_DEST_AD: + res = ch->dest_ad; + break; + case BCM2708_DMA_TXFR_LEN: + res = ch->txfr_len; + break; + case BCM2708_DMA_STRIDE: + res = ch->stride; + break; + case BCM2708_DMA_NEXTCB: + res = ch->nextconbk; + break; + case BCM2708_DMA_DEBUG: + res = ch->debug; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } + return res; +} + +static void bcm2835_dma_write(BCM2835DMAState *s, hwaddr offset, + uint64_t value, unsigned size, unsigned c) +{ + BCM2835DMAChan *ch; + uint32_t oldcs; + + assert(size == 4); + assert(c < BCM2835_DMA_NCHANS); + + ch = &s->chan[c]; + + switch (offset) { + case BCM2708_DMA_CS: + oldcs = ch->cs; + if (value & BCM2708_DMA_RESET) { + bcm2835_dma_chan_reset(ch); + } + if (value & BCM2708_DMA_ABORT) { + /* abort is a no-op, since we always run to completion */ + } + if (value & BCM2708_DMA_END) { + ch->cs &= ~BCM2708_DMA_END; + } + if (value & BCM2708_DMA_INT) { + ch->cs &= ~BCM2708_DMA_INT; + s->int_status &= ~(1 << c); + qemu_set_irq(ch->irq, 0); + } + ch->cs &= ~BCM2708_DMA_CS_RW_MASK; + ch->cs |= (value & BCM2708_DMA_CS_RW_MASK); + if (!(oldcs & BCM2708_DMA_ACTIVE) && (ch->cs & BCM2708_DMA_ACTIVE)) { + bcm2835_dma_update(s, c); + } + break; + case BCM2708_DMA_ADDR: + ch->conblk_ad = value; + break; + case BCM2708_DMA_DEBUG: + ch->debug = value; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + break; + } +} + +static uint64_t bcm2835_dma0_read(void *opaque, hwaddr offset, unsigned size) +{ + BCM2835DMAState *s = opaque; + + if (offset < 0xf00) { + return bcm2835_dma_read(s, (offset & 0xff), size, (offset >> 8) & 0xf); + } else { + switch (offset) { + case BCM2708_DMA_INT_STATUS: + return s->int_status; + case BCM2708_DMA_ENABLE: + return s->enable; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + return 0; + } + } +} + +static uint64_t bcm2835_dma15_read(void *opaque, hwaddr offset, unsigned size) +{ + return bcm2835_dma_read(opaque, (offset & 0xff), size, 15); +} + +static void bcm2835_dma0_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + BCM2835DMAState *s = opaque; + + if (offset < 0xf00) { + bcm2835_dma_write(s, (offset & 0xff), value, size, (offset >> 8) & 0xf); + } else { + switch (offset) { + case BCM2708_DMA_INT_STATUS: + break; + case BCM2708_DMA_ENABLE: + s->enable = (value & 0xffff); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + } + } + +} + +static void bcm2835_dma15_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + bcm2835_dma_write(opaque, (offset & 0xff), value, size, 15); +} + +static const MemoryRegionOps bcm2835_dma0_ops = { + .read = bcm2835_dma0_read, + .write = bcm2835_dma0_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static const MemoryRegionOps bcm2835_dma15_ops = { + .read = bcm2835_dma15_read, + .write = bcm2835_dma15_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static const VMStateDescription vmstate_bcm2835_dma_chan = { + .name = TYPE_BCM2835_DMA "-chan", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cs, BCM2835DMAChan), + VMSTATE_UINT32(conblk_ad, BCM2835DMAChan), + VMSTATE_UINT32(ti, BCM2835DMAChan), + VMSTATE_UINT32(source_ad, BCM2835DMAChan), + VMSTATE_UINT32(dest_ad, BCM2835DMAChan), + VMSTATE_UINT32(txfr_len, BCM2835DMAChan), + VMSTATE_UINT32(stride, BCM2835DMAChan), + VMSTATE_UINT32(nextconbk, BCM2835DMAChan), + VMSTATE_UINT32(debug, BCM2835DMAChan), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_bcm2835_dma = { + .name = TYPE_BCM2835_DMA, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_STRUCT_ARRAY(chan, BCM2835DMAState, BCM2835_DMA_NCHANS, 1, + vmstate_bcm2835_dma_chan, BCM2835DMAChan), + VMSTATE_UINT32(int_status, BCM2835DMAState), + VMSTATE_UINT32(enable, BCM2835DMAState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_dma_init(Object *obj) +{ + BCM2835DMAState *s = BCM2835_DMA(obj); + int n; + + /* DMA channels 0-14 occupy a contiguous block of IO memory, along + * with the global enable and interrupt status bits. Channel 15 + * has the same register map, but is mapped at a discontiguous + * address in a separate IO block. + */ + memory_region_init_io(&s->iomem0, OBJECT(s), &bcm2835_dma0_ops, s, + TYPE_BCM2835_DMA, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem0); + + memory_region_init_io(&s->iomem15, OBJECT(s), &bcm2835_dma15_ops, s, + TYPE_BCM2835_DMA "-chan15", 0x100); + sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem15); + + for (n = 0; n < 16; n++) { + sysbus_init_irq(SYS_BUS_DEVICE(s), &s->chan[n].irq); + } +} + +static void bcm2835_dma_reset(DeviceState *dev) +{ + BCM2835DMAState *s = BCM2835_DMA(dev); + int n; + + s->enable = 0xffff; + s->int_status = 0; + for (n = 0; n < BCM2835_DMA_NCHANS; n++) { + bcm2835_dma_chan_reset(&s->chan[n]); + } +} + +static void bcm2835_dma_realize(DeviceState *dev, Error **errp) +{ + BCM2835DMAState *s = BCM2835_DMA(dev); + Error *err = NULL; + Object *obj; + + obj = object_property_get_link(OBJECT(dev), "dma-mr", &err); + if (obj == NULL) { + error_setg(errp, "%s: required dma-mr link not found: %s", + __func__, error_get_pretty(err)); + return; + } + + s->dma_mr = MEMORY_REGION(obj); + address_space_init(&s->dma_as, s->dma_mr, NULL); + + bcm2835_dma_reset(dev); +} + +static void bcm2835_dma_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = bcm2835_dma_realize; + dc->reset = bcm2835_dma_reset; + dc->vmsd = &vmstate_bcm2835_dma; +} + +static TypeInfo bcm2835_dma_info = { + .name = TYPE_BCM2835_DMA, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835DMAState), + .class_init = bcm2835_dma_class_init, + .instance_init = bcm2835_dma_init, +}; + +static void bcm2835_dma_register_types(void) +{ + type_register_static(&bcm2835_dma_info); +} + +type_init(bcm2835_dma_register_types) |