diff options
Diffstat (limited to 'qemu/hw/display/ssd0303.c')
| -rw-r--r-- | qemu/hw/display/ssd0303.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/qemu/hw/display/ssd0303.c b/qemu/hw/display/ssd0303.c new file mode 100644 index 000000000..f6804fb51 --- /dev/null +++ b/qemu/hw/display/ssd0303.c @@ -0,0 +1,330 @@ +/* + * SSD0303 OLED controller with OSRAM Pictiva 96x16 display. + * + * Copyright (c) 2006-2007 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the GPL. + */ + +/* The controller can support a variety of different displays, but we only + implement one. Most of the commends relating to brightness and geometry + setup are ignored. */ +#include "hw/i2c/i2c.h" +#include "ui/console.h" + +//#define DEBUG_SSD0303 1 + +#ifdef DEBUG_SSD0303 +#define DPRINTF(fmt, ...) \ +do { printf("ssd0303: " fmt , ## __VA_ARGS__); } while (0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) +#else +#define DPRINTF(fmt, ...) do {} while(0) +#define BADF(fmt, ...) \ +do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__);} while (0) +#endif + +/* Scaling factor for pixels. */ +#define MAGNIFY 4 + +enum ssd0303_mode +{ + SSD0303_IDLE, + SSD0303_DATA, + SSD0303_CMD +}; + +enum ssd0303_cmd { + SSD0303_CMD_NONE, + SSD0303_CMD_SKIP1 +}; + +#define TYPE_SSD0303 "ssd0303" +#define SSD0303(obj) OBJECT_CHECK(ssd0303_state, (obj), TYPE_SSD0303) + +typedef struct { + I2CSlave parent_obj; + + QemuConsole *con; + int row; + int col; + int start_line; + int mirror; + int flash; + int enabled; + int inverse; + int redraw; + enum ssd0303_mode mode; + enum ssd0303_cmd cmd_state; + uint8_t framebuffer[132*8]; +} ssd0303_state; + +static int ssd0303_recv(I2CSlave *i2c) +{ + BADF("Reads not implemented\n"); + return -1; +} + +static int ssd0303_send(I2CSlave *i2c, uint8_t data) +{ + ssd0303_state *s = SSD0303(i2c); + enum ssd0303_cmd old_cmd_state; + + switch (s->mode) { + case SSD0303_IDLE: + DPRINTF("byte 0x%02x\n", data); + if (data == 0x80) + s->mode = SSD0303_CMD; + else if (data == 0x40) + s->mode = SSD0303_DATA; + else + BADF("Unexpected byte 0x%x\n", data); + break; + case SSD0303_DATA: + DPRINTF("data 0x%02x\n", data); + if (s->col < 132) { + s->framebuffer[s->col + s->row * 132] = data; + s->col++; + s->redraw = 1; + } + break; + case SSD0303_CMD: + old_cmd_state = s->cmd_state; + s->cmd_state = SSD0303_CMD_NONE; + switch (old_cmd_state) { + case SSD0303_CMD_NONE: + DPRINTF("cmd 0x%02x\n", data); + s->mode = SSD0303_IDLE; + switch (data) { + case 0x00 ... 0x0f: /* Set lower column address. */ + s->col = (s->col & 0xf0) | (data & 0xf); + break; + case 0x10 ... 0x20: /* Set higher column address. */ + s->col = (s->col & 0x0f) | ((data & 0xf) << 4); + break; + case 0x40 ... 0x7f: /* Set start line. */ + s->start_line = 0; + break; + case 0x81: /* Set contrast (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xa0: /* Mirror off. */ + s->mirror = 0; + break; + case 0xa1: /* Mirror off. */ + s->mirror = 1; + break; + case 0xa4: /* Entire display off. */ + s->flash = 0; + break; + case 0xa5: /* Entire display on. */ + s->flash = 1; + break; + case 0xa6: /* Inverse off. */ + s->inverse = 0; + break; + case 0xa7: /* Inverse on. */ + s->inverse = 1; + break; + case 0xa8: /* Set multiplied ratio (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xad: /* DC-DC power control. */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xae: /* Display off. */ + s->enabled = 0; + break; + case 0xaf: /* Display on. */ + s->enabled = 1; + break; + case 0xb0 ... 0xbf: /* Set Page address. */ + s->row = data & 7; + break; + case 0xc0 ... 0xc8: /* Set COM output direction (Ignored). */ + break; + case 0xd3: /* Set display offset (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xd5: /* Set display clock (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xd8: /* Set color and power mode (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xd9: /* Set pre-charge period (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xda: /* Set COM pin configuration (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xdb: /* Set VCOM dselect level (Ignored). */ + s->cmd_state = SSD0303_CMD_SKIP1; + break; + case 0xe3: /* no-op. */ + break; + default: + BADF("Unknown command: 0x%x\n", data); + } + break; + case SSD0303_CMD_SKIP1: + DPRINTF("skip 0x%02x\n", data); + break; + } + break; + } + return 0; +} + +static void ssd0303_event(I2CSlave *i2c, enum i2c_event event) +{ + ssd0303_state *s = SSD0303(i2c); + + switch (event) { + case I2C_FINISH: + s->mode = SSD0303_IDLE; + break; + case I2C_START_RECV: + case I2C_START_SEND: + case I2C_NACK: + /* Nothing to do. */ + break; + } +} + +static void ssd0303_update_display(void *opaque) +{ + ssd0303_state *s = (ssd0303_state *)opaque; + DisplaySurface *surface = qemu_console_surface(s->con); + uint8_t *dest; + uint8_t *src; + int x; + int y; + int line; + char *colors[2]; + char colortab[MAGNIFY * 8]; + int dest_width; + uint8_t mask; + + if (!s->redraw) + return; + + switch (surface_bits_per_pixel(surface)) { + case 0: + return; + case 15: + dest_width = 2; + break; + case 16: + dest_width = 2; + break; + case 24: + dest_width = 3; + break; + case 32: + dest_width = 4; + break; + default: + BADF("Bad color depth\n"); + return; + } + dest_width *= MAGNIFY; + memset(colortab, 0xff, dest_width); + memset(colortab + dest_width, 0, dest_width); + if (s->flash) { + colors[0] = colortab; + colors[1] = colortab; + } else if (s->inverse) { + colors[0] = colortab; + colors[1] = colortab + dest_width; + } else { + colors[0] = colortab + dest_width; + colors[1] = colortab; + } + dest = surface_data(surface); + for (y = 0; y < 16; y++) { + line = (y + s->start_line) & 63; + src = s->framebuffer + 132 * (line >> 3) + 36; + mask = 1 << (line & 7); + for (x = 0; x < 96; x++) { + memcpy(dest, colors[(*src & mask) != 0], dest_width); + dest += dest_width; + src++; + } + for (x = 1; x < MAGNIFY; x++) { + memcpy(dest, dest - dest_width * 96, dest_width * 96); + dest += dest_width * 96; + } + } + s->redraw = 0; + dpy_gfx_update(s->con, 0, 0, 96 * MAGNIFY, 16 * MAGNIFY); +} + +static void ssd0303_invalidate_display(void * opaque) +{ + ssd0303_state *s = (ssd0303_state *)opaque; + s->redraw = 1; +} + +static const VMStateDescription vmstate_ssd0303 = { + .name = "ssd0303_oled", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_INT32(row, ssd0303_state), + VMSTATE_INT32(col, ssd0303_state), + VMSTATE_INT32(start_line, ssd0303_state), + VMSTATE_INT32(mirror, ssd0303_state), + VMSTATE_INT32(flash, ssd0303_state), + VMSTATE_INT32(enabled, ssd0303_state), + VMSTATE_INT32(inverse, ssd0303_state), + VMSTATE_INT32(redraw, ssd0303_state), + VMSTATE_UINT32(mode, ssd0303_state), + VMSTATE_UINT32(cmd_state, ssd0303_state), + VMSTATE_BUFFER(framebuffer, ssd0303_state), + VMSTATE_I2C_SLAVE(parent_obj, ssd0303_state), + VMSTATE_END_OF_LIST() + } +}; + +static const GraphicHwOps ssd0303_ops = { + .invalidate = ssd0303_invalidate_display, + .gfx_update = ssd0303_update_display, +}; + +static int ssd0303_init(I2CSlave *i2c) +{ + ssd0303_state *s = SSD0303(i2c); + + s->con = graphic_console_init(DEVICE(i2c), 0, &ssd0303_ops, s); + qemu_console_resize(s->con, 96 * MAGNIFY, 16 * MAGNIFY); + return 0; +} + +static void ssd0303_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->init = ssd0303_init; + k->event = ssd0303_event; + k->recv = ssd0303_recv; + k->send = ssd0303_send; + dc->vmsd = &vmstate_ssd0303; +} + +static const TypeInfo ssd0303_info = { + .name = TYPE_SSD0303, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(ssd0303_state), + .class_init = ssd0303_class_init, +}; + +static void ssd0303_register_types(void) +{ + type_register_static(&ssd0303_info); +} + +type_init(ssd0303_register_types) |