diff options
Diffstat (limited to 'qemu/hw/char/imx_serial.c')
| -rw-r--r-- | qemu/hw/char/imx_serial.c | 235 |
1 files changed, 65 insertions, 170 deletions
diff --git a/qemu/hw/char/imx_serial.c b/qemu/hw/char/imx_serial.c index f3fbc776b..6df74ac7c 100644 --- a/qemu/hw/char/imx_serial.c +++ b/qemu/hw/char/imx_serial.c @@ -4,6 +4,7 @@ * Copyright (c) 2008 OKL * Originally Written by Hans Jiang * Copyright (c) 2011 NICTA Pty Ltd. + * Updated by Jean-Christophe Dubois <jcd@tribudubois.net> * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. @@ -17,63 +18,25 @@ * is a real serial device. */ -#include "hw/hw.h" -#include "hw/sysbus.h" +#include "qemu/osdep.h" +#include "hw/char/imx_serial.h" #include "sysemu/sysemu.h" #include "sysemu/char.h" -#include "hw/arm/imx.h" -//#define DEBUG_SERIAL 1 -#ifdef DEBUG_SERIAL -#define DPRINTF(fmt, args...) \ -do { printf("imx_serial: " fmt , ##args); } while (0) -#else -#define DPRINTF(fmt, args...) do {} while (0) -#endif - -/* - * Define to 1 for messages about attempts to - * access unimplemented registers or similar. - */ -//#define DEBUG_IMPLEMENTATION 1 -#ifdef DEBUG_IMPLEMENTATION -# define IPRINTF(fmt, args...) \ - do { fprintf(stderr, "imx_serial: " fmt, ##args); } while (0) -#else -# define IPRINTF(fmt, args...) do {} while (0) +#ifndef DEBUG_IMX_UART +#define DEBUG_IMX_UART 0 #endif -#define TYPE_IMX_SERIAL "imx-serial" -#define IMX_SERIAL(obj) OBJECT_CHECK(IMXSerialState, (obj), TYPE_IMX_SERIAL) - -typedef struct IMXSerialState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - int32_t readbuff; - - uint32_t usr1; - uint32_t usr2; - uint32_t ucr1; - uint32_t ucr2; - uint32_t uts1; - - /* - * The registers below are implemented just so that the - * guest OS sees what it has written - */ - uint32_t onems; - uint32_t ufcr; - uint32_t ubmr; - uint32_t ubrc; - uint32_t ucr3; - - qemu_irq irq; - CharDriverState *chr; -} IMXSerialState; +#define DPRINTF(fmt, args...) \ + do { \ + if (DEBUG_IMX_UART) { \ + fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \ + __func__, ##args); \ + } \ + } while (0) static const VMStateDescription vmstate_imx_serial = { - .name = "imx-serial", + .name = TYPE_IMX_SERIAL, .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { @@ -91,61 +54,14 @@ static const VMStateDescription vmstate_imx_serial = { }, }; - -#define URXD_CHARRDY (1<<15) /* character read is valid */ -#define URXD_ERR (1<<14) /* Character has error */ -#define URXD_BRK (1<<11) /* Break received */ - -#define USR1_PARTYER (1<<15) /* Parity Error */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Tx ready */ -#define USR1_RTSD (1<<12) /* RTS delta: pin changed state */ -#define USR1_ESCF (1<<11) /* Escape sequence interrupt */ -#define USR1_FRAMERR (1<<10) /* Framing error */ -#define USR1_RRDY (1<<9) /* receiver ready */ -#define USR1_AGTIM (1<<8) /* Aging timer interrupt */ -#define USR1_DTRD (1<<7) /* DTR changed */ -#define USR1_RXDS (1<<6) /* Receiver is idle */ -#define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */ -#define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */ - -#define USR2_ADET (1<<15) /* Autobaud complete */ -#define USR2_TXFE (1<<14) /* Transmit FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR/DSR transition */ -#define USR2_IDLE (1<<12) /* UART has been idle for too long */ -#define USR2_ACST (1<<11) /* Autobaud counter stopped */ -#define USR2_RIDELT (1<<10) /* Ring Indicator delta */ -#define USR2_RIIN (1<<9) /* Ring Indicator Input */ -#define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */ -#define USR2_WAKE (1<<7) /* Start bit detected */ -#define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */ -#define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */ -#define USR2_RTSF (1<<4) /* RTS transition */ -#define USR2_TXDC (1<<3) /* Transmission complete */ -#define USR2_BRCD (1<<2) /* Break condition detected */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Receive data ready */ - -#define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */ -#define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */ -#define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */ -#define UCR1_UARTEN (1<<0) /* UART Enable */ - -#define UCR2_TXEN (1<<2) /* Transmitter enable */ -#define UCR2_RXEN (1<<1) /* Receiver enable */ -#define UCR2_SRST (1<<0) /* Reset complete */ - -#define UTS1_TXEMPTY (1<<6) -#define UTS1_RXEMPTY (1<<5) -#define UTS1_TXFULL (1<<4) -#define UTS1_RXFULL (1<<3) - static void imx_update(IMXSerialState *s) { uint32_t flags; flags = (s->usr1 & s->ucr1) & (USR1_TRDY|USR1_RRDY); - if (!(s->ucr1 & UCR1_TXMPTYEN)) { + if (s->ucr1 & UCR1_TXMPTYEN) { + flags |= (s->uts1 & UTS1_TXEMPTY); + } else { flags &= ~USR1_TRDY; } @@ -192,7 +108,8 @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, IMXSerialState *s = (IMXSerialState *)opaque; uint32_t c; - DPRINTF("read(offset=%x)\n", offset >> 2); + DPRINTF("read(offset=0x%" HWADDR_PRIx ")\n", offset); + switch (offset >> 2) { case 0x0: /* URXD */ c = s->readbuff; @@ -203,7 +120,9 @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, s->usr2 &= ~USR2_RDR; s->uts1 |= UTS1_RXEMPTY; imx_update(s); - qemu_chr_accept_input(s->chr); + if (s->chr) { + qemu_chr_accept_input(s->chr); + } } return c; @@ -242,20 +161,20 @@ static uint64_t imx_serial_read(void *opaque, hwaddr offset, return 0x0; /* TODO */ default: - IPRINTF("imx_serial_read: bad offset: 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset); return 0; } } static void imx_serial_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { IMXSerialState *s = (IMXSerialState *)opaque; unsigned char ch; - DPRINTF("write(offset=%x, value = %x) to %s\n", - offset >> 2, - (unsigned int)value, s->chr ? s->chr->label : "NODEV"); + DPRINTF("write(offset=0x%" HWADDR_PRIx ", value = 0x%x) to %s\n", + offset, (unsigned int)value, s->chr ? s->chr->label : "NODEV"); switch (offset >> 2) { case 0x10: /* UTXD */ @@ -273,7 +192,9 @@ static void imx_serial_write(void *opaque, hwaddr offset, case 0x20: /* UCR1 */ s->ucr1 = value & 0xffff; + DPRINTF("write(ucr1=%x)\n", (unsigned int)value); + imx_update(s); break; @@ -290,7 +211,9 @@ static void imx_serial_write(void *opaque, hwaddr offset, } if (value & UCR2_RXEN) { if (!(s->ucr2 & UCR2_RXEN)) { - qemu_chr_accept_input(s->chr); + if (s->chr) { + qemu_chr_accept_input(s->chr); + } } } s->ucr2 = value & 0xffff; @@ -298,25 +221,25 @@ static void imx_serial_write(void *opaque, hwaddr offset, case 0x25: /* USR1 */ value &= USR1_AWAKE | USR1_AIRINT | USR1_DTRD | USR1_AGTIM | - USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER; + USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER; s->usr1 &= ~value; break; case 0x26: /* USR2 */ - /* - * Writing 1 to some bits clears them; all other - * values are ignored - */ + /* + * Writing 1 to some bits clears them; all other + * values are ignored + */ value &= USR2_ADET | USR2_DTRF | USR2_IDLE | USR2_ACST | - USR2_RIDELT | USR2_IRINT | USR2_WAKE | - USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE; + USR2_RIDELT | USR2_IRINT | USR2_WAKE | + USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE; s->usr2 &= ~value; break; - /* - * Linux expects to see what it writes to these registers - * We don't currently alter the baud rate - */ + /* + * Linux expects to see what it writes to these registers + * We don't currently alter the baud rate + */ case 0x29: /* UBIR */ s->ubrc = value & 0xffff; break; @@ -339,12 +262,14 @@ static void imx_serial_write(void *opaque, hwaddr offset, case 0x2d: /* UTS1 */ case 0x23: /* UCR4 */ - IPRINTF("Unimplemented Register %x written to\n", offset >> 2); + qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%" + HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset); /* TODO */ break; default: - IPRINTF("imx_serial_write: Bad offset 0x%x\n", (int)offset); + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset); } } @@ -357,7 +282,9 @@ static int imx_can_receive(void *opaque) static void imx_put_data(void *opaque, uint32_t value) { IMXSerialState *s = (IMXSerialState *)opaque; + DPRINTF("received char\n"); + s->usr1 |= USR1_RRDY; s->usr2 |= USR2_RDR; s->uts1 &= ~UTS1_RXEMPTY; @@ -384,62 +311,30 @@ static const struct MemoryRegionOps imx_serial_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static int imx_serial_init(SysBusDevice *dev) +static void imx_serial_realize(DeviceState *dev, Error **errp) { IMXSerialState *s = IMX_SERIAL(dev); - - memory_region_init_io(&s->iomem, OBJECT(s), &imx_serial_ops, s, - "imx-serial", 0x1000); - sysbus_init_mmio(dev, &s->iomem); - sysbus_init_irq(dev, &s->irq); - if (s->chr) { qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive, imx_event, s); } else { - DPRINTF("No char dev for uart at 0x%lx\n", - (unsigned long)s->iomem.ram_addr); + DPRINTF("No char dev for uart\n"); } - - return 0; } -void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq) +static void imx_serial_init(Object *obj) { - DeviceState *dev; - SysBusDevice *bus; - CharDriverState *chr; - const char chr_name[] = "serial"; - char label[ARRAY_SIZE(chr_name) + 1]; - - dev = qdev_create(NULL, TYPE_IMX_SERIAL); - - if (uart >= MAX_SERIAL_PORTS) { - hw_error("Cannot assign uart %d: QEMU supports only %d ports\n", - uart, MAX_SERIAL_PORTS); - } - chr = serial_hds[uart]; - if (!chr) { - snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart); - chr = qemu_chr_new(label, "null", NULL); - if (!(chr)) { - hw_error("Can't assign serial port to imx-uart%d.\n", uart); - } - } - - qdev_prop_set_chr(dev, "chardev", chr); - bus = SYS_BUS_DEVICE(dev); - qdev_init_nofail(dev); - if (addr != (hwaddr)-1) { - sysbus_mmio_map(bus, 0, addr); - } - sysbus_connect_irq(bus, 0, irq); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + IMXSerialState *s = IMX_SERIAL(obj); + memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s, + TYPE_IMX_SERIAL, 0x1000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); } - -static Property imx32_serial_properties[] = { +static Property imx_serial_properties[] = { DEFINE_PROP_CHR("chardev", IMXSerialState, chr), DEFINE_PROP_END_OF_LIST(), }; @@ -447,21 +342,21 @@ static Property imx32_serial_properties[] = { static void imx_serial_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); - SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); - k->init = imx_serial_init; + dc->realize = imx_serial_realize; dc->vmsd = &vmstate_imx_serial; dc->reset = imx_serial_reset_at_boot; set_bit(DEVICE_CATEGORY_INPUT, dc->categories); dc->desc = "i.MX series UART"; - dc->props = imx32_serial_properties; + dc->props = imx_serial_properties; } static const TypeInfo imx_serial_info = { - .name = TYPE_IMX_SERIAL, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(IMXSerialState), - .class_init = imx_serial_class_init, + .name = TYPE_IMX_SERIAL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMXSerialState), + .instance_init = imx_serial_init, + .class_init = imx_serial_class_init, }; static void imx_serial_register_types(void) |