diff options
Diffstat (limited to 'qemu/hw/arm/palm.c')
-rw-r--r-- | qemu/hw/arm/palm.c | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/qemu/hw/arm/palm.c b/qemu/hw/arm/palm.c deleted file mode 100644 index 7f460732e..000000000 --- a/qemu/hw/arm/palm.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * PalmOne's (TM) PDAs. - * - * Copyright (C) 2006-2007 Andrzej Zaborowski <balrog@zabor.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 or - * (at your option) version 3 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see <http://www.gnu.org/licenses/>. - */ -#include "qemu/osdep.h" -#include "qapi/error.h" -#include "hw/hw.h" -#include "audio/audio.h" -#include "sysemu/sysemu.h" -#include "sysemu/qtest.h" -#include "ui/console.h" -#include "hw/arm/omap.h" -#include "hw/boards.h" -#include "hw/arm/arm.h" -#include "hw/devices.h" -#include "hw/loader.h" -#include "exec/address-spaces.h" - -static uint32_t static_readb(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 3) << 3); -} - -static uint32_t static_readh(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 1) << 3); -} - -static uint32_t static_readw(void *opaque, hwaddr offset) -{ - uint32_t *val = (uint32_t *) opaque; - return *val >> ((offset & 0) << 3); -} - -static void static_write(void *opaque, hwaddr offset, - uint32_t value) -{ -#ifdef SPY - printf("%s: value %08lx written at " PA_FMT "\n", - __FUNCTION__, value, offset); -#endif -} - -static const MemoryRegionOps static_ops = { - .old_mmio = { - .read = { static_readb, static_readh, static_readw, }, - .write = { static_write, static_write, static_write, }, - }, - .endianness = DEVICE_NATIVE_ENDIAN, -}; - -/* Palm Tunsgten|E support */ - -/* Shared GPIOs */ -#define PALMTE_USBDETECT_GPIO 0 -#define PALMTE_USB_OR_DC_GPIO 1 -#define PALMTE_TSC_GPIO 4 -#define PALMTE_PINTDAV_GPIO 6 -#define PALMTE_MMC_WP_GPIO 8 -#define PALMTE_MMC_POWER_GPIO 9 -#define PALMTE_HDQ_GPIO 11 -#define PALMTE_HEADPHONES_GPIO 14 -#define PALMTE_SPEAKER_GPIO 15 -/* MPU private GPIOs */ -#define PALMTE_DC_GPIO 2 -#define PALMTE_MMC_SWITCH_GPIO 4 -#define PALMTE_MMC1_GPIO 6 -#define PALMTE_MMC2_GPIO 7 -#define PALMTE_MMC3_GPIO 11 - -static MouseTransformInfo palmte_pointercal = { - .x = 320, - .y = 320, - .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 }, -}; - -static void palmte_microwire_setup(struct omap_mpu_state_s *cpu) -{ - uWireSlave *tsc; - - tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO)); - - omap_uwire_attach(cpu->microwire, tsc, 0); - omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc)); - - tsc210x_set_transform(tsc, &palmte_pointercal); -} - -static struct { - int row; - int column; -} palmte_keymap[0x80] = { - [0 ... 0x7f] = { -1, -1 }, - [0x3b] = { 0, 0 }, /* F1 -> Calendar */ - [0x3c] = { 1, 0 }, /* F2 -> Contacts */ - [0x3d] = { 2, 0 }, /* F3 -> Tasks List */ - [0x3e] = { 3, 0 }, /* F4 -> Note Pad */ - [0x01] = { 4, 0 }, /* Esc -> Power */ - [0x4b] = { 0, 1 }, /* Left */ - [0x50] = { 1, 1 }, /* Down */ - [0x48] = { 2, 1 }, /* Up */ - [0x4d] = { 3, 1 }, /* Right */ - [0x4c] = { 4, 1 }, /* Centre */ - [0x39] = { 4, 1 }, /* Spc -> Centre */ -}; - -static void palmte_button_event(void *opaque, int keycode) -{ - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; - - if (palmte_keymap[keycode & 0x7f].row != -1) - omap_mpuio_key(cpu->mpuio, - palmte_keymap[keycode & 0x7f].row, - palmte_keymap[keycode & 0x7f].column, - !(keycode & 0x80)); -} - -static void palmte_onoff_gpios(void *opaque, int line, int level) -{ - switch (line) { - case 0: - printf("%s: current to MMC/SD card %sabled.\n", - __FUNCTION__, level ? "dis" : "en"); - break; - case 1: - printf("%s: internal speaker amplifier %s.\n", - __FUNCTION__, level ? "down" : "on"); - break; - - /* These LCD & Audio output signals have not been identified yet. */ - case 2: - case 3: - case 4: - printf("%s: LCD GPIO%i %s.\n", - __FUNCTION__, line - 1, level ? "high" : "low"); - break; - case 5: - case 6: - printf("%s: Audio GPIO%i %s.\n", - __FUNCTION__, line - 4, level ? "high" : "low"); - break; - } -} - -static void palmte_gpio_setup(struct omap_mpu_state_s *cpu) -{ - qemu_irq *misc_gpio; - - omap_mmc_handlers(cpu->mmc, - qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO), - qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio) - [PALMTE_MMC_SWITCH_GPIO])); - - misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7); - qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]); - qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]); - qdev_connect_gpio_out(cpu->gpio, 11, misc_gpio[2]); - qdev_connect_gpio_out(cpu->gpio, 12, misc_gpio[3]); - qdev_connect_gpio_out(cpu->gpio, 13, misc_gpio[4]); - omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]); - omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]); - - /* Reset some inputs to initial state. */ - qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO)); - qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO)); - qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4)); - qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO)); - qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]); - qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]); - qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]); - qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]); -} - -static struct arm_boot_info palmte_binfo = { - .loader_start = OMAP_EMIFF_BASE, - .ram_size = 0x02000000, - .board_id = 0x331, -}; - -static void palmte_init(MachineState *machine) -{ - const char *cpu_model = machine->cpu_model; - const char *kernel_filename = machine->kernel_filename; - const char *kernel_cmdline = machine->kernel_cmdline; - const char *initrd_filename = machine->initrd_filename; - MemoryRegion *address_space_mem = get_system_memory(); - struct omap_mpu_state_s *mpu; - int flash_size = 0x00800000; - int sdram_size = palmte_binfo.ram_size; - static uint32_t cs0val = 0xffffffff; - static uint32_t cs1val = 0x0000e1a0; - static uint32_t cs2val = 0x0000e1a0; - static uint32_t cs3val = 0xe1a0e1a0; - int rom_size, rom_loaded = 0; - MemoryRegion *flash = g_new(MemoryRegion, 1); - MemoryRegion *cs = g_new(MemoryRegion, 4); - - mpu = omap310_mpu_init(address_space_mem, sdram_size, cpu_model); - - /* External Flash (EMIFS) */ - memory_region_init_ram(flash, NULL, "palmte.flash", flash_size, - &error_fatal); - vmstate_register_ram_global(flash); - memory_region_set_readonly(flash, true); - memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash); - - memory_region_init_io(&cs[0], NULL, &static_ops, &cs0val, "palmte-cs0", - OMAP_CS0_SIZE - flash_size); - memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size, - &cs[0]); - memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, "palmte-cs1", - OMAP_CS1_SIZE); - memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]); - memory_region_init_io(&cs[2], NULL, &static_ops, &cs2val, "palmte-cs2", - OMAP_CS2_SIZE); - memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]); - memory_region_init_io(&cs[3], NULL, &static_ops, &cs3val, "palmte-cs3", - OMAP_CS3_SIZE); - memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]); - - palmte_microwire_setup(mpu); - - qemu_add_kbd_event_handler(palmte_button_event, mpu); - - palmte_gpio_setup(mpu); - - /* Setup initial (reset) machine state */ - if (nb_option_roms) { - rom_size = get_image_size(option_rom[0].name); - if (rom_size > flash_size) { - fprintf(stderr, "%s: ROM image too big (%x > %x)\n", - __FUNCTION__, rom_size, flash_size); - rom_size = 0; - } - if (rom_size > 0) { - rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE, - flash_size); - rom_loaded = 1; - } - if (rom_size < 0) { - fprintf(stderr, "%s: error loading '%s'\n", - __FUNCTION__, option_rom[0].name); - } - } - - if (!rom_loaded && !kernel_filename && !qtest_enabled()) { - fprintf(stderr, "Kernel or ROM image must be specified\n"); - exit(1); - } - - /* Load the kernel. */ - palmte_binfo.kernel_filename = kernel_filename; - palmte_binfo.kernel_cmdline = kernel_cmdline; - palmte_binfo.initrd_filename = initrd_filename; - arm_load_kernel(mpu->cpu, &palmte_binfo); -} - -static void palmte_machine_init(MachineClass *mc) -{ - mc->desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)"; - mc->init = palmte_init; -} - -DEFINE_MACHINE("cheetah", palmte_machine_init) |