diff options
Diffstat (limited to 'qemu/hw/arm/mainstone.c')
| -rw-r--r-- | qemu/hw/arm/mainstone.c | 199 |
1 files changed, 0 insertions, 199 deletions
diff --git a/qemu/hw/arm/mainstone.c b/qemu/hw/arm/mainstone.c deleted file mode 100644 index 454acc5d2..000000000 --- a/qemu/hw/arm/mainstone.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * PXA270-based Intel Mainstone platforms. - * - * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or - * <akuster@mvista.com> - * - * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org> - * - * This code is licensed under the GNU GPL v2. - * - * Contributions after 2012-01-13 are licensed under the terms of the - * GNU GPL, version 2 or (at your option) any later version. - */ -#include "qemu/osdep.h" -#include "qapi/error.h" -#include "hw/hw.h" -#include "hw/arm/pxa.h" -#include "hw/arm/arm.h" -#include "net/net.h" -#include "hw/devices.h" -#include "hw/boards.h" -#include "hw/block/flash.h" -#include "sysemu/block-backend.h" -#include "hw/sysbus.h" -#include "exec/address-spaces.h" -#include "sysemu/qtest.h" - -/* Device addresses */ -#define MST_FPGA_PHYS 0x08000000 -#define MST_ETH_PHYS 0x10000300 -#define MST_FLASH_0 0x00000000 -#define MST_FLASH_1 0x04000000 - -/* IRQ definitions */ -#define MMC_IRQ 0 -#define USIM_IRQ 1 -#define USBC_IRQ 2 -#define ETHERNET_IRQ 3 -#define AC97_IRQ 4 -#define PEN_IRQ 5 -#define MSINS_IRQ 6 -#define EXBRD_IRQ 7 -#define S0_CD_IRQ 9 -#define S0_STSCHG_IRQ 10 -#define S0_IRQ 11 -#define S1_CD_IRQ 13 -#define S1_STSCHG_IRQ 14 -#define S1_IRQ 15 - -static const struct keymap map[0xE0] = { - [0 ... 0xDF] = { -1, -1 }, - [0x1e] = {0,0}, /* a */ - [0x30] = {0,1}, /* b */ - [0x2e] = {0,2}, /* c */ - [0x20] = {0,3}, /* d */ - [0x12] = {0,4}, /* e */ - [0x21] = {0,5}, /* f */ - [0x22] = {1,0}, /* g */ - [0x23] = {1,1}, /* h */ - [0x17] = {1,2}, /* i */ - [0x24] = {1,3}, /* j */ - [0x25] = {1,4}, /* k */ - [0x26] = {1,5}, /* l */ - [0x32] = {2,0}, /* m */ - [0x31] = {2,1}, /* n */ - [0x18] = {2,2}, /* o */ - [0x19] = {2,3}, /* p */ - [0x10] = {2,4}, /* q */ - [0x13] = {2,5}, /* r */ - [0x1f] = {3,0}, /* s */ - [0x14] = {3,1}, /* t */ - [0x16] = {3,2}, /* u */ - [0x2f] = {3,3}, /* v */ - [0x11] = {3,4}, /* w */ - [0x2d] = {3,5}, /* x */ - [0x15] = {4,2}, /* y */ - [0x2c] = {4,3}, /* z */ - [0xc7] = {5,0}, /* Home */ - [0x2a] = {5,1}, /* shift */ - /* - * There are two matrix positions which map to space, - * but QEMU can only use one of them for the reverse - * mapping, so simply use the second one. - */ - /* [0x39] = {5,2}, space */ - [0x39] = {5,3}, /* space */ - /* - * Matrix position {5,4} and other keys are missing here. - * TODO: Compare with Linux code and test real hardware. - */ - [0x1c] = {5,5}, /* enter (TODO: might be wrong) */ - [0xc8] = {6,0}, /* up */ - [0xd0] = {6,1}, /* down */ - [0xcb] = {6,2}, /* left */ - [0xcd] = {6,3}, /* right */ -}; - -enum mainstone_model_e { mainstone }; - -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 - -static struct arm_boot_info mainstone_binfo = { - .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, -}; - -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, - enum mainstone_model_e model, int arm_id) -{ - uint32_t sector_len = 256 * 1024; - hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; - PXA2xxState *mpu; - DeviceState *mst_irq; - DriveInfo *dinfo; - int i; - int be; - MemoryRegion *rom = g_new(MemoryRegion, 1); - const char *cpu_model = machine->cpu_model; - - if (!cpu_model) - cpu_model = "pxa270-c5"; - - /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model); - memory_region_init_ram(rom, NULL, "mainstone.rom", MAINSTONE_ROM, - &error_fatal); - vmstate_register_ram_global(rom); - memory_region_set_readonly(rom, true); - memory_region_add_subregion(address_space_mem, 0, rom); - -#ifdef TARGET_WORDS_BIGENDIAN - be = 1; -#else - be = 0; -#endif - /* There are two 32MiB flash devices on the board */ - for (i = 0; i < 2; i ++) { - dinfo = drive_get(IF_PFLASH, 0, i); - if (!dinfo) { - if (qtest_enabled()) { - break; - } - fprintf(stderr, "Two flash images must be given with the " - "'pflash' parameter\n"); - exit(1); - } - - if (!pflash_cfi01_register(mainstone_flash_base[i], NULL, - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, - blk_by_legacy_dinfo(dinfo), - sector_len, MAINSTONE_FLASH / sector_len, - 4, 0, 0, 0, 0, be)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - exit(1); - } - } - - mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, - qdev_get_gpio_in(mpu->gpio, 0)); - - /* setup keypad */ - pxa27x_register_keypad(mpu->kp, map, 0xe0); - - /* MMC/SD host */ - pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ)); - - pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0], - qdev_get_gpio_in(mst_irq, S0_IRQ), - qdev_get_gpio_in(mst_irq, S0_CD_IRQ)); - pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1], - qdev_get_gpio_in(mst_irq, S1_IRQ), - qdev_get_gpio_in(mst_irq, S1_CD_IRQ)); - - smc91c111_init(&nd_table[0], MST_ETH_PHYS, - qdev_get_gpio_in(mst_irq, ETHERNET_IRQ)); - - mainstone_binfo.kernel_filename = machine->kernel_filename; - mainstone_binfo.kernel_cmdline = machine->kernel_cmdline; - mainstone_binfo.initrd_filename = machine->initrd_filename; - mainstone_binfo.board_id = arm_id; - arm_load_kernel(mpu->cpu, &mainstone_binfo); -} - -static void mainstone_init(MachineState *machine) -{ - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); -} - -static void mainstone2_machine_init(MachineClass *mc) -{ - mc->desc = "Mainstone II (PXA27x)"; - mc->init = mainstone_init; -} - -DEFINE_MACHINE("mainstone", mainstone2_machine_init) |