summaryrefslogtreecommitdiffstats
path: root/qemu/hmp-commands.hx
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/hmp-commands.hx')
-rw-r--r--qemu/hmp-commands.hx1761
1 files changed, 0 insertions, 1761 deletions
diff --git a/qemu/hmp-commands.hx b/qemu/hmp-commands.hx
deleted file mode 100644
index 4f4f60a0d..000000000
--- a/qemu/hmp-commands.hx
+++ /dev/null
@@ -1,1761 +0,0 @@
-HXCOMM Use DEFHEADING() to define headings in both help text and texi
-HXCOMM Text between STEXI and ETEXI are copied to texi version and
-HXCOMM discarded from C version
-HXCOMM DEF(command, args, callback, arg_string, help) is used to construct
-HXCOMM monitor commands
-HXCOMM HXCOMM can be used for comments, discarded from both texi and C
-
-STEXI
-@table @option
-ETEXI
-
- {
- .name = "help|?",
- .args_type = "name:S?",
- .params = "[cmd]",
- .help = "show the help",
- .mhandler.cmd = do_help_cmd,
- },
-
-STEXI
-@item help or ? [@var{cmd}]
-@findex help
-Show the help for all commands or just for command @var{cmd}.
-ETEXI
-
- {
- .name = "commit",
- .args_type = "device:B",
- .params = "device|all",
- .help = "commit changes to the disk images (if -snapshot is used) or backing files",
- .mhandler.cmd = hmp_commit,
- },
-
-STEXI
-@item commit
-@findex commit
-Commit changes to the disk images (if -snapshot is used) or backing files.
-If the backing file is smaller than the snapshot, then the backing file will be
-resized to be the same size as the snapshot. If the snapshot is smaller than
-the backing file, the backing file will not be truncated. If you want the
-backing file to match the size of the smaller snapshot, you can safely truncate
-it yourself once the commit operation successfully completes.
-ETEXI
-
- {
- .name = "q|quit",
- .args_type = "",
- .params = "",
- .help = "quit the emulator",
- .mhandler.cmd = hmp_quit,
- },
-
-STEXI
-@item q or quit
-@findex quit
-Quit the emulator.
-ETEXI
-
- {
- .name = "block_resize",
- .args_type = "device:B,size:o",
- .params = "device size",
- .help = "resize a block image",
- .mhandler.cmd = hmp_block_resize,
- },
-
-STEXI
-@item block_resize
-@findex block_resize
-Resize a block image while a guest is running. Usually requires guest
-action to see the updated size. Resize to a lower size is supported,
-but should be used with extreme caution. Note that this command only
-resizes image files, it can not resize block devices like LVM volumes.
-ETEXI
-
- {
- .name = "block_stream",
- .args_type = "device:B,speed:o?,base:s?",
- .params = "device [speed [base]]",
- .help = "copy data from a backing file into a block device",
- .mhandler.cmd = hmp_block_stream,
- },
-
-STEXI
-@item block_stream
-@findex block_stream
-Copy data from a backing file into a block device.
-ETEXI
-
- {
- .name = "block_job_set_speed",
- .args_type = "device:B,speed:o",
- .params = "device speed",
- .help = "set maximum speed for a background block operation",
- .mhandler.cmd = hmp_block_job_set_speed,
- },
-
-STEXI
-@item block_job_set_speed
-@findex block_job_set_speed
-Set maximum speed for a background block operation.
-ETEXI
-
- {
- .name = "block_job_cancel",
- .args_type = "force:-f,device:B",
- .params = "[-f] device",
- .help = "stop an active background block operation (use -f"
- "\n\t\t\t if the operation is currently paused)",
- .mhandler.cmd = hmp_block_job_cancel,
- },
-
-STEXI
-@item block_job_cancel
-@findex block_job_cancel
-Stop an active background block operation (streaming, mirroring).
-ETEXI
-
- {
- .name = "block_job_complete",
- .args_type = "device:B",
- .params = "device",
- .help = "stop an active background block operation",
- .mhandler.cmd = hmp_block_job_complete,
- },
-
-STEXI
-@item block_job_complete
-@findex block_job_complete
-Manually trigger completion of an active background block operation.
-For mirroring, this will switch the device to the destination path.
-ETEXI
-
- {
- .name = "block_job_pause",
- .args_type = "device:B",
- .params = "device",
- .help = "pause an active background block operation",
- .mhandler.cmd = hmp_block_job_pause,
- },
-
-STEXI
-@item block_job_pause
-@findex block_job_pause
-Pause an active block streaming operation.
-ETEXI
-
- {
- .name = "block_job_resume",
- .args_type = "device:B",
- .params = "device",
- .help = "resume a paused background block operation",
- .mhandler.cmd = hmp_block_job_resume,
- },
-
-STEXI
-@item block_job_resume
-@findex block_job_resume
-Resume a paused block streaming operation.
-ETEXI
-
- {
- .name = "eject",
- .args_type = "force:-f,device:B",
- .params = "[-f] device",
- .help = "eject a removable medium (use -f to force it)",
- .mhandler.cmd = hmp_eject,
- },
-
-STEXI
-@item eject [-f] @var{device}
-@findex eject
-Eject a removable medium (use -f to force it).
-ETEXI
-
- {
- .name = "drive_del",
- .args_type = "id:B",
- .params = "device",
- .help = "remove host block device",
- .mhandler.cmd = hmp_drive_del,
- },
-
-STEXI
-@item drive_del @var{device}
-@findex drive_del
-Remove host block device. The result is that guest generated IO is no longer
-submitted against the host device underlying the disk. Once a drive has
-been deleted, the QEMU Block layer returns -EIO which results in IO
-errors in the guest for applications that are reading/writing to the device.
-These errors are always reported to the guest, regardless of the drive's error
-actions (drive options rerror, werror).
-ETEXI
-
- {
- .name = "change",
- .args_type = "device:B,target:F,arg:s?,read-only-mode:s?",
- .params = "device filename [format [read-only-mode]]",
- .help = "change a removable medium, optional format",
- .mhandler.cmd = hmp_change,
- },
-
-STEXI
-@item change @var{device} @var{setting}
-@findex change
-Change the configuration of a device.
-
-@table @option
-@item change @var{diskdevice} @var{filename} [@var{format} [@var{read-only-mode}]]
-Change the medium for a removable disk device to point to @var{filename}. eg
-
-@example
-(qemu) change ide1-cd0 /path/to/some.iso
-@end example
-
-@var{format} is optional.
-
-@var{read-only-mode} may be used to change the read-only status of the device.
-It accepts the following values:
-
-@table @var
-@item retain
-Retains the current status; this is the default.
-
-@item read-only
-Makes the device read-only.
-
-@item read-write
-Makes the device writable.
-@end table
-
-@item change vnc @var{display},@var{options}
-Change the configuration of the VNC server. The valid syntax for @var{display}
-and @var{options} are described at @ref{sec_invocation}. eg
-
-@example
-(qemu) change vnc localhost:1
-@end example
-
-@item change vnc password [@var{password}]
-
-Change the password associated with the VNC server. If the new password is not
-supplied, the monitor will prompt for it to be entered. VNC passwords are only
-significant up to 8 letters. eg
-
-@example
-(qemu) change vnc password
-Password: ********
-@end example
-
-@end table
-ETEXI
-
- {
- .name = "screendump",
- .args_type = "filename:F",
- .params = "filename",
- .help = "save screen into PPM image 'filename'",
- .mhandler.cmd = hmp_screendump,
- },
-
-STEXI
-@item screendump @var{filename}
-@findex screendump
-Save screen into PPM image @var{filename}.
-ETEXI
-
- {
- .name = "logfile",
- .args_type = "filename:F",
- .params = "filename",
- .help = "output logs to 'filename'",
- .mhandler.cmd = hmp_logfile,
- },
-
-STEXI
-@item logfile @var{filename}
-@findex logfile
-Output logs to @var{filename}.
-ETEXI
-
- {
- .name = "trace-event",
- .args_type = "name:s,option:b",
- .params = "name on|off",
- .help = "changes status of a specific trace event",
- .mhandler.cmd = hmp_trace_event,
- .command_completion = trace_event_completion,
- },
-
-STEXI
-@item trace-event
-@findex trace-event
-changes status of a trace event
-ETEXI
-
-#if defined(CONFIG_TRACE_SIMPLE)
- {
- .name = "trace-file",
- .args_type = "op:s?,arg:F?",
- .params = "on|off|flush|set [arg]",
- .help = "open, close, or flush trace file, or set a new file name",
- .mhandler.cmd = hmp_trace_file,
- },
-
-STEXI
-@item trace-file on|off|flush
-@findex trace-file
-Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed.
-ETEXI
-#endif
-
- {
- .name = "log",
- .args_type = "items:s",
- .params = "item1[,...]",
- .help = "activate logging of the specified items",
- .mhandler.cmd = hmp_log,
- },
-
-STEXI
-@item log @var{item1}[,...]
-@findex log
-Activate logging of the specified items.
-ETEXI
-
- {
- .name = "savevm",
- .args_type = "name:s?",
- .params = "[tag|id]",
- .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created",
- .mhandler.cmd = hmp_savevm,
- },
-
-STEXI
-@item savevm [@var{tag}|@var{id}]
-@findex savevm
-Create a snapshot of the whole virtual machine. If @var{tag} is
-provided, it is used as human readable identifier. If there is already
-a snapshot with the same tag or ID, it is replaced. More info at
-@ref{vm_snapshots}.
-ETEXI
-
- {
- .name = "loadvm",
- .args_type = "name:s",
- .params = "tag|id",
- .help = "restore a VM snapshot from its tag or id",
- .mhandler.cmd = hmp_loadvm,
- .command_completion = loadvm_completion,
- },
-
-STEXI
-@item loadvm @var{tag}|@var{id}
-@findex loadvm
-Set the whole virtual machine to the snapshot identified by the tag
-@var{tag} or the unique snapshot ID @var{id}.
-ETEXI
-
- {
- .name = "delvm",
- .args_type = "name:s",
- .params = "tag|id",
- .help = "delete a VM snapshot from its tag or id",
- .mhandler.cmd = hmp_delvm,
- .command_completion = delvm_completion,
- },
-
-STEXI
-@item delvm @var{tag}|@var{id}
-@findex delvm
-Delete the snapshot identified by @var{tag} or @var{id}.
-ETEXI
-
- {
- .name = "singlestep",
- .args_type = "option:s?",
- .params = "[on|off]",
- .help = "run emulation in singlestep mode or switch to normal mode",
- .mhandler.cmd = hmp_singlestep,
- },
-
-STEXI
-@item singlestep [off]
-@findex singlestep
-Run the emulation in single step mode.
-If called with option off, the emulation returns to normal mode.
-ETEXI
-
- {
- .name = "stop",
- .args_type = "",
- .params = "",
- .help = "stop emulation",
- .mhandler.cmd = hmp_stop,
- },
-
-STEXI
-@item stop
-@findex stop
-Stop emulation.
-ETEXI
-
- {
- .name = "c|cont",
- .args_type = "",
- .params = "",
- .help = "resume emulation",
- .mhandler.cmd = hmp_cont,
- },
-
-STEXI
-@item c or cont
-@findex cont
-Resume emulation.
-ETEXI
-
- {
- .name = "system_wakeup",
- .args_type = "",
- .params = "",
- .help = "wakeup guest from suspend",
- .mhandler.cmd = hmp_system_wakeup,
- },
-
-STEXI
-@item system_wakeup
-@findex system_wakeup
-Wakeup guest from suspend.
-ETEXI
-
- {
- .name = "gdbserver",
- .args_type = "device:s?",
- .params = "[device]",
- .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'",
- .mhandler.cmd = hmp_gdbserver,
- },
-
-STEXI
-@item gdbserver [@var{port}]
-@findex gdbserver
-Start gdbserver session (default @var{port}=1234)
-ETEXI
-
- {
- .name = "x",
- .args_type = "fmt:/,addr:l",
- .params = "/fmt addr",
- .help = "virtual memory dump starting at 'addr'",
- .mhandler.cmd = hmp_memory_dump,
- },
-
-STEXI
-@item x/fmt @var{addr}
-@findex x
-Virtual memory dump starting at @var{addr}.
-ETEXI
-
- {
- .name = "xp",
- .args_type = "fmt:/,addr:l",
- .params = "/fmt addr",
- .help = "physical memory dump starting at 'addr'",
- .mhandler.cmd = hmp_physical_memory_dump,
- },
-
-STEXI
-@item xp /@var{fmt} @var{addr}
-@findex xp
-Physical memory dump starting at @var{addr}.
-
-@var{fmt} is a format which tells the command how to format the
-data. Its syntax is: @option{/@{count@}@{format@}@{size@}}
-
-@table @var
-@item count
-is the number of items to be dumped.
-
-@item format
-can be x (hex), d (signed decimal), u (unsigned decimal), o (octal),
-c (char) or i (asm instruction).
-
-@item size
-can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86,
-@code{h} or @code{w} can be specified with the @code{i} format to
-respectively select 16 or 32 bit code instruction size.
-
-@end table
-
-Examples:
-@itemize
-@item
-Dump 10 instructions at the current instruction pointer:
-@example
-(qemu) x/10i $eip
-0x90107063: ret
-0x90107064: sti
-0x90107065: lea 0x0(%esi,1),%esi
-0x90107069: lea 0x0(%edi,1),%edi
-0x90107070: ret
-0x90107071: jmp 0x90107080
-0x90107073: nop
-0x90107074: nop
-0x90107075: nop
-0x90107076: nop
-@end example
-
-@item
-Dump 80 16 bit values at the start of the video memory.
-@smallexample
-(qemu) xp/80hx 0xb8000
-0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42
-0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41
-0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72
-0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73
-0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20
-0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720
-0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-@end smallexample
-@end itemize
-ETEXI
-
- {
- .name = "p|print",
- .args_type = "fmt:/,val:l",
- .params = "/fmt expr",
- .help = "print expression value (use $reg for CPU register access)",
- .mhandler.cmd = do_print,
- },
-
-STEXI
-@item p or print/@var{fmt} @var{expr}
-@findex print
-Print expression value. Only the @var{format} part of @var{fmt} is
-used.
-ETEXI
-
- {
- .name = "i",
- .args_type = "fmt:/,addr:i,index:i.",
- .params = "/fmt addr",
- .help = "I/O port read",
- .mhandler.cmd = hmp_ioport_read,
- },
-
-STEXI
-@item i/@var{fmt} @var{addr} [.@var{index}]
-@findex i
-Read I/O port.
-ETEXI
-
- {
- .name = "o",
- .args_type = "fmt:/,addr:i,val:i",
- .params = "/fmt addr value",
- .help = "I/O port write",
- .mhandler.cmd = hmp_ioport_write,
- },
-
-STEXI
-@item o/@var{fmt} @var{addr} @var{val}
-@findex o
-Write to I/O port.
-ETEXI
-
- {
- .name = "sendkey",
- .args_type = "keys:s,hold-time:i?",
- .params = "keys [hold_ms]",
- .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)",
- .mhandler.cmd = hmp_sendkey,
- .command_completion = sendkey_completion,
- },
-
-STEXI
-@item sendkey @var{keys}
-@findex sendkey
-Send @var{keys} to the guest. @var{keys} could be the name of the
-key or the raw value in hexadecimal format. Use @code{-} to press
-several keys simultaneously. Example:
-@example
-sendkey ctrl-alt-f1
-@end example
-
-This command is useful to send keys that your graphical user interface
-intercepts at low level, such as @code{ctrl-alt-f1} in X Window.
-ETEXI
-
- {
- .name = "system_reset",
- .args_type = "",
- .params = "",
- .help = "reset the system",
- .mhandler.cmd = hmp_system_reset,
- },
-
-STEXI
-@item system_reset
-@findex system_reset
-Reset the system.
-ETEXI
-
- {
- .name = "system_powerdown",
- .args_type = "",
- .params = "",
- .help = "send system power down event",
- .mhandler.cmd = hmp_system_powerdown,
- },
-
-STEXI
-@item system_powerdown
-@findex system_powerdown
-Power down the system (if supported).
-ETEXI
-
- {
- .name = "sum",
- .args_type = "start:i,size:i",
- .params = "addr size",
- .help = "compute the checksum of a memory region",
- .mhandler.cmd = hmp_sum,
- },
-
-STEXI
-@item sum @var{addr} @var{size}
-@findex sum
-Compute the checksum of a memory region.
-ETEXI
-
- {
- .name = "usb_add",
- .args_type = "devname:s",
- .params = "device",
- .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')",
- .mhandler.cmd = hmp_usb_add,
- },
-
-STEXI
-@item usb_add @var{devname}
-@findex usb_add
-Add the USB device @var{devname}. For details of available devices see
-@ref{usb_devices}
-ETEXI
-
- {
- .name = "usb_del",
- .args_type = "devname:s",
- .params = "device",
- .help = "remove USB device 'bus.addr'",
- .mhandler.cmd = hmp_usb_del,
- },
-
-STEXI
-@item usb_del @var{devname}
-@findex usb_del
-Remove the USB device @var{devname} from the QEMU virtual USB
-hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor
-command @code{info usb} to see the devices you can remove.
-ETEXI
-
- {
- .name = "device_add",
- .args_type = "device:O",
- .params = "driver[,prop=value][,...]",
- .help = "add device, like -device on the command line",
- .mhandler.cmd = hmp_device_add,
- .command_completion = device_add_completion,
- },
-
-STEXI
-@item device_add @var{config}
-@findex device_add
-Add device.
-ETEXI
-
- {
- .name = "device_del",
- .args_type = "id:s",
- .params = "device",
- .help = "remove device",
- .mhandler.cmd = hmp_device_del,
- .command_completion = device_del_completion,
- },
-
-STEXI
-@item device_del @var{id}
-@findex device_del
-Remove device @var{id}. @var{id} may be a short ID
-or a QOM object path.
-ETEXI
-
- {
- .name = "cpu",
- .args_type = "index:i",
- .params = "index",
- .help = "set the default CPU",
- .mhandler.cmd = hmp_cpu,
- },
-
-STEXI
-@item cpu @var{index}
-@findex cpu
-Set the default CPU.
-ETEXI
-
- {
- .name = "mouse_move",
- .args_type = "dx_str:s,dy_str:s,dz_str:s?",
- .params = "dx dy [dz]",
- .help = "send mouse move events",
- .mhandler.cmd = hmp_mouse_move,
- },
-
-STEXI
-@item mouse_move @var{dx} @var{dy} [@var{dz}]
-@findex mouse_move
-Move the active mouse to the specified coordinates @var{dx} @var{dy}
-with optional scroll axis @var{dz}.
-ETEXI
-
- {
- .name = "mouse_button",
- .args_type = "button_state:i",
- .params = "state",
- .help = "change mouse button state (1=L, 2=M, 4=R)",
- .mhandler.cmd = hmp_mouse_button,
- },
-
-STEXI
-@item mouse_button @var{val}
-@findex mouse_button
-Change the active mouse button state @var{val} (1=L, 2=M, 4=R).
-ETEXI
-
- {
- .name = "mouse_set",
- .args_type = "index:i",
- .params = "index",
- .help = "set which mouse device receives events",
- .mhandler.cmd = hmp_mouse_set,
- },
-
-STEXI
-@item mouse_set @var{index}
-@findex mouse_set
-Set which mouse device receives events at given @var{index}, index
-can be obtained with
-@example
-info mice
-@end example
-ETEXI
-
- {
- .name = "wavcapture",
- .args_type = "path:F,freq:i?,bits:i?,nchannels:i?",
- .params = "path [frequency [bits [channels]]]",
- .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)",
- .mhandler.cmd = hmp_wavcapture,
- },
-STEXI
-@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]
-@findex wavcapture
-Capture audio into @var{filename}. Using sample rate @var{frequency}
-bits per sample @var{bits} and number of channels @var{channels}.
-
-Defaults:
-@itemize @minus
-@item Sample rate = 44100 Hz - CD quality
-@item Bits = 16
-@item Number of channels = 2 - Stereo
-@end itemize
-ETEXI
-
- {
- .name = "stopcapture",
- .args_type = "n:i",
- .params = "capture index",
- .help = "stop capture",
- .mhandler.cmd = hmp_stopcapture,
- },
-STEXI
-@item stopcapture @var{index}
-@findex stopcapture
-Stop capture with a given @var{index}, index can be obtained with
-@example
-info capture
-@end example
-ETEXI
-
- {
- .name = "memsave",
- .args_type = "val:l,size:i,filename:s",
- .params = "addr size file",
- .help = "save to disk virtual memory dump starting at 'addr' of size 'size'",
- .mhandler.cmd = hmp_memsave,
- },
-
-STEXI
-@item memsave @var{addr} @var{size} @var{file}
-@findex memsave
-save to disk virtual memory dump starting at @var{addr} of size @var{size}.
-ETEXI
-
- {
- .name = "pmemsave",
- .args_type = "val:l,size:i,filename:s",
- .params = "addr size file",
- .help = "save to disk physical memory dump starting at 'addr' of size 'size'",
- .mhandler.cmd = hmp_pmemsave,
- },
-
-STEXI
-@item pmemsave @var{addr} @var{size} @var{file}
-@findex pmemsave
-save to disk physical memory dump starting at @var{addr} of size @var{size}.
-ETEXI
-
- {
- .name = "boot_set",
- .args_type = "bootdevice:s",
- .params = "bootdevice",
- .help = "define new values for the boot device list",
- .mhandler.cmd = hmp_boot_set,
- },
-
-STEXI
-@item boot_set @var{bootdevicelist}
-@findex boot_set
-Define new values for the boot device list. Those values will override
-the values specified on the command line through the @code{-boot} option.
-
-The values that can be specified here depend on the machine type, but are
-the same that can be specified in the @code{-boot} command line option.
-ETEXI
-
- {
- .name = "nmi",
- .args_type = "",
- .params = "",
- .help = "inject an NMI",
- .mhandler.cmd = hmp_nmi,
- },
-STEXI
-@item nmi @var{cpu}
-@findex nmi
-Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
-
-ETEXI
-
- {
- .name = "ringbuf_write",
- .args_type = "device:s,data:s",
- .params = "device data",
- .help = "Write to a ring buffer character device",
- .mhandler.cmd = hmp_ringbuf_write,
- .command_completion = ringbuf_write_completion,
- },
-
-STEXI
-@item ringbuf_write @var{device} @var{data}
-@findex ringbuf_write
-Write @var{data} to ring buffer character device @var{device}.
-@var{data} must be a UTF-8 string.
-
-ETEXI
-
- {
- .name = "ringbuf_read",
- .args_type = "device:s,size:i",
- .params = "device size",
- .help = "Read from a ring buffer character device",
- .mhandler.cmd = hmp_ringbuf_read,
- .command_completion = ringbuf_write_completion,
- },
-
-STEXI
-@item ringbuf_read @var{device}
-@findex ringbuf_read
-Read and print up to @var{size} bytes from ring buffer character
-device @var{device}.
-Certain non-printable characters are printed \uXXXX, where XXXX is the
-character code in hexadecimal. Character \ is printed \\.
-Bug: can screw up when the buffer contains invalid UTF-8 sequences,
-NUL characters, after the ring buffer lost data, and when reading
-stops because the size limit is reached.
-
-ETEXI
-
- {
- .name = "migrate",
- .args_type = "detach:-d,blk:-b,inc:-i,uri:s",
- .params = "[-d] [-b] [-i] uri",
- .help = "migrate to URI (using -d to not wait for completion)"
- "\n\t\t\t -b for migration without shared storage with"
- " full copy of disk\n\t\t\t -i for migration without "
- "shared storage with incremental copy of disk "
- "(base image shared between src and destination)",
- .mhandler.cmd = hmp_migrate,
- },
-
-
-STEXI
-@item migrate [-d] [-b] [-i] @var{uri}
-@findex migrate
-Migrate to @var{uri} (using -d to not wait for completion).
- -b for migration with full copy of disk
- -i for migration with incremental copy of disk (base image is shared)
-ETEXI
-
- {
- .name = "migrate_cancel",
- .args_type = "",
- .params = "",
- .help = "cancel the current VM migration",
- .mhandler.cmd = hmp_migrate_cancel,
- },
-
-STEXI
-@item migrate_cancel
-@findex migrate_cancel
-Cancel the current VM migration.
-
-ETEXI
-
- {
- .name = "migrate_incoming",
- .args_type = "uri:s",
- .params = "uri",
- .help = "Continue an incoming migration from an -incoming defer",
- .mhandler.cmd = hmp_migrate_incoming,
- },
-
-STEXI
-@item migrate_incoming @var{uri}
-@findex migrate_incoming
-Continue an incoming migration using the @var{uri} (that has the same syntax
-as the -incoming option).
-
-ETEXI
-
- {
- .name = "migrate_set_cache_size",
- .args_type = "value:o",
- .params = "value",
- .help = "set cache size (in bytes) for XBZRLE migrations,"
- "the cache size will be rounded down to the nearest "
- "power of 2.\n"
- "The cache size affects the number of cache misses."
- "In case of a high cache miss ratio you need to increase"
- " the cache size",
- .mhandler.cmd = hmp_migrate_set_cache_size,
- },
-
-STEXI
-@item migrate_set_cache_size @var{value}
-@findex migrate_set_cache_size
-Set cache size to @var{value} (in bytes) for xbzrle migrations.
-ETEXI
-
- {
- .name = "migrate_set_speed",
- .args_type = "value:o",
- .params = "value",
- .help = "set maximum speed (in bytes) for migrations. "
- "Defaults to MB if no size suffix is specified, ie. B/K/M/G/T",
- .mhandler.cmd = hmp_migrate_set_speed,
- },
-
-STEXI
-@item migrate_set_speed @var{value}
-@findex migrate_set_speed
-Set maximum speed to @var{value} (in bytes) for migrations.
-ETEXI
-
- {
- .name = "migrate_set_downtime",
- .args_type = "value:T",
- .params = "value",
- .help = "set maximum tolerated downtime (in seconds) for migrations",
- .mhandler.cmd = hmp_migrate_set_downtime,
- },
-
-STEXI
-@item migrate_set_downtime @var{second}
-@findex migrate_set_downtime
-Set maximum tolerated downtime (in seconds) for migration.
-ETEXI
-
- {
- .name = "migrate_set_capability",
- .args_type = "capability:s,state:b",
- .params = "capability state",
- .help = "Enable/Disable the usage of a capability for migration",
- .mhandler.cmd = hmp_migrate_set_capability,
- .command_completion = migrate_set_capability_completion,
- },
-
-STEXI
-@item migrate_set_capability @var{capability} @var{state}
-@findex migrate_set_capability
-Enable/Disable the usage of a capability @var{capability} for migration.
-ETEXI
-
- {
- .name = "migrate_set_parameter",
- .args_type = "parameter:s,value:i",
- .params = "parameter value",
- .help = "Set the parameter for migration",
- .mhandler.cmd = hmp_migrate_set_parameter,
- .command_completion = migrate_set_parameter_completion,
- },
-
-STEXI
-@item migrate_set_parameter @var{parameter} @var{value}
-@findex migrate_set_parameter
-Set the parameter @var{parameter} for migration.
-ETEXI
-
- {
- .name = "migrate_start_postcopy",
- .args_type = "",
- .params = "",
- .help = "Followup to a migration command to switch the migration"
- " to postcopy mode. The postcopy-ram capability must "
- "be set before the original migration command.",
- .mhandler.cmd = hmp_migrate_start_postcopy,
- },
-
-STEXI
-@item migrate_start_postcopy
-@findex migrate_start_postcopy
-Switch in-progress migration to postcopy mode. Ignored after the end of
-migration (or once already in postcopy).
-ETEXI
-
- {
- .name = "client_migrate_info",
- .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
- .params = "protocol hostname port tls-port cert-subject",
- .help = "set migration information for remote display",
- .mhandler.cmd = hmp_client_migrate_info,
- },
-
-STEXI
-@item client_migrate_info @var{protocol} @var{hostname} @var{port} @var{tls-port} @var{cert-subject}
-@findex client_migrate_info
-Set migration information for remote display. This makes the server
-ask the client to automatically reconnect using the new parameters
-once migration finished successfully. Only implemented for SPICE.
-ETEXI
-
- {
- .name = "dump-guest-memory",
- .args_type = "paging:-p,detach:-d,zlib:-z,lzo:-l,snappy:-s,filename:F,begin:i?,length:i?",
- .params = "[-p] [-d] [-z|-l|-s] filename [begin length]",
- .help = "dump guest memory into file 'filename'.\n\t\t\t"
- "-p: do paging to get guest's memory mapping.\n\t\t\t"
- "-d: return immediately (do not wait for completion).\n\t\t\t"
- "-z: dump in kdump-compressed format, with zlib compression.\n\t\t\t"
- "-l: dump in kdump-compressed format, with lzo compression.\n\t\t\t"
- "-s: dump in kdump-compressed format, with snappy compression.\n\t\t\t"
- "begin: the starting physical address.\n\t\t\t"
- "length: the memory size, in bytes.",
- .mhandler.cmd = hmp_dump_guest_memory,
- },
-
-
-STEXI
-@item dump-guest-memory [-p] @var{filename} @var{begin} @var{length}
-@item dump-guest-memory [-z|-l|-s] @var{filename}
-@findex dump-guest-memory
-Dump guest memory to @var{protocol}. The file can be processed with crash or
-gdb. Without -z|-l|-s, the dump format is ELF.
- -p: do paging to get guest's memory mapping.
- -z: dump in kdump-compressed format, with zlib compression.
- -l: dump in kdump-compressed format, with lzo compression.
- -s: dump in kdump-compressed format, with snappy compression.
- filename: dump file name.
- begin: the starting physical address. It's optional, and should be
- specified together with length.
- length: the memory size, in bytes. It's optional, and should be specified
- together with begin.
-ETEXI
-
-#if defined(TARGET_S390X)
- {
- .name = "dump-skeys",
- .args_type = "filename:F",
- .params = "",
- .help = "Save guest storage keys into file 'filename'.\n",
- .mhandler.cmd = hmp_dump_skeys,
- },
-#endif
-
-STEXI
-@item dump-skeys @var{filename}
-@findex dump-skeys
-Save guest storage keys to a file.
-ETEXI
-
- {
- .name = "snapshot_blkdev",
- .args_type = "reuse:-n,device:B,snapshot-file:s?,format:s?",
- .params = "[-n] device [new-image-file] [format]",
- .help = "initiates a live snapshot\n\t\t\t"
- "of device. If a new image file is specified, the\n\t\t\t"
- "new image file will become the new root image.\n\t\t\t"
- "If format is specified, the snapshot file will\n\t\t\t"
- "be created in that format.\n\t\t\t"
- "The default format is qcow2. The -n flag requests QEMU\n\t\t\t"
- "to reuse the image found in new-image-file, instead of\n\t\t\t"
- "recreating it from scratch.",
- .mhandler.cmd = hmp_snapshot_blkdev,
- },
-
-STEXI
-@item snapshot_blkdev
-@findex snapshot_blkdev
-Snapshot device, using snapshot file as target if provided
-ETEXI
-
- {
- .name = "snapshot_blkdev_internal",
- .args_type = "device:B,name:s",
- .params = "device name",
- .help = "take an internal snapshot of device.\n\t\t\t"
- "The format of the image used by device must\n\t\t\t"
- "support it, such as qcow2.\n\t\t\t",
- .mhandler.cmd = hmp_snapshot_blkdev_internal,
- },
-
-STEXI
-@item snapshot_blkdev_internal
-@findex snapshot_blkdev_internal
-Take an internal snapshot on device if it support
-ETEXI
-
- {
- .name = "snapshot_delete_blkdev_internal",
- .args_type = "device:B,name:s,id:s?",
- .params = "device name [id]",
- .help = "delete an internal snapshot of device.\n\t\t\t"
- "If id is specified, qemu will try delete\n\t\t\t"
- "the snapshot matching both id and name.\n\t\t\t"
- "The format of the image used by device must\n\t\t\t"
- "support it, such as qcow2.\n\t\t\t",
- .mhandler.cmd = hmp_snapshot_delete_blkdev_internal,
- },
-
-STEXI
-@item snapshot_delete_blkdev_internal
-@findex snapshot_delete_blkdev_internal
-Delete an internal snapshot on device if it support
-ETEXI
-
- {
- .name = "drive_mirror",
- .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?",
- .params = "[-n] [-f] device target [format]",
- .help = "initiates live storage\n\t\t\t"
- "migration for a device. The device's contents are\n\t\t\t"
- "copied to the new image file, including data that\n\t\t\t"
- "is written after the command is started.\n\t\t\t"
- "The -n flag requests QEMU to reuse the image found\n\t\t\t"
- "in new-image-file, instead of recreating it from scratch.\n\t\t\t"
- "The -f flag requests QEMU to copy the whole disk,\n\t\t\t"
- "so that the result does not need a backing file.\n\t\t\t",
- .mhandler.cmd = hmp_drive_mirror,
- },
-STEXI
-@item drive_mirror
-@findex drive_mirror
-Start mirroring a block device's writes to a new destination,
-using the specified target.
-ETEXI
-
- {
- .name = "drive_backup",
- .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?",
- .params = "[-n] [-f] device target [format]",
- .help = "initiates a point-in-time\n\t\t\t"
- "copy for a device. The device's contents are\n\t\t\t"
- "copied to the new image file, excluding data that\n\t\t\t"
- "is written after the command is started.\n\t\t\t"
- "The -n flag requests QEMU to reuse the image found\n\t\t\t"
- "in new-image-file, instead of recreating it from scratch.\n\t\t\t"
- "The -f flag requests QEMU to copy the whole disk,\n\t\t\t"
- "so that the result does not need a backing file.\n\t\t\t",
- .mhandler.cmd = hmp_drive_backup,
- },
-STEXI
-@item drive_backup
-@findex drive_backup
-Start a point-in-time copy of a block device to a specificed target.
-ETEXI
-
- {
- .name = "drive_add",
- .args_type = "node:-n,pci_addr:s,opts:s",
- .params = "[-n] [[<domain>:]<bus>:]<slot>\n"
- "[file=file][,if=type][,bus=n]\n"
- "[,unit=m][,media=d][,index=i]\n"
- "[,cyls=c,heads=h,secs=s[,trans=t]]\n"
- "[,snapshot=on|off][,cache=on|off]\n"
- "[,readonly=on|off][,copy-on-read=on|off]",
- .help = "add drive to PCI storage controller",
- .mhandler.cmd = hmp_drive_add,
- },
-
-STEXI
-@item drive_add
-@findex drive_add
-Add drive to PCI storage controller.
-ETEXI
-
- {
- .name = "pcie_aer_inject_error",
- .args_type = "advisory_non_fatal:-a,correctable:-c,"
- "id:s,error_status:s,"
- "header0:i?,header1:i?,header2:i?,header3:i?,"
- "prefix0:i?,prefix1:i?,prefix2:i?,prefix3:i?",
- .params = "[-a] [-c] id "
- "<error_status> [<tlp header> [<tlp header prefix>]]",
- .help = "inject pcie aer error\n\t\t\t"
- " -a for advisory non fatal error\n\t\t\t"
- " -c for correctable error\n\t\t\t"
- "<id> = qdev device id\n\t\t\t"
- "<error_status> = error string or 32bit\n\t\t\t"
- "<tlb header> = 32bit x 4\n\t\t\t"
- "<tlb header prefix> = 32bit x 4",
- .mhandler.cmd = hmp_pcie_aer_inject_error,
- },
-
-STEXI
-@item pcie_aer_inject_error
-@findex pcie_aer_inject_error
-Inject PCIe AER error
-ETEXI
-
- {
- .name = "host_net_add",
- .args_type = "device:s,opts:s?",
- .params = "tap|user|socket|vde|netmap|bridge|vhost-user|dump [options]",
- .help = "add host VLAN client",
- .mhandler.cmd = hmp_host_net_add,
- .command_completion = host_net_add_completion,
- },
-
-STEXI
-@item host_net_add
-@findex host_net_add
-Add host VLAN client.
-ETEXI
-
- {
- .name = "host_net_remove",
- .args_type = "vlan_id:i,device:s",
- .params = "vlan_id name",
- .help = "remove host VLAN client",
- .mhandler.cmd = hmp_host_net_remove,
- .command_completion = host_net_remove_completion,
- },
-
-STEXI
-@item host_net_remove
-@findex host_net_remove
-Remove host VLAN client.
-ETEXI
-
- {
- .name = "netdev_add",
- .args_type = "netdev:O",
- .params = "[user|tap|socket|vde|bridge|hubport|netmap|vhost-user],id=str[,prop=value][,...]",
- .help = "add host network device",
- .mhandler.cmd = hmp_netdev_add,
- .command_completion = netdev_add_completion,
- },
-
-STEXI
-@item netdev_add
-@findex netdev_add
-Add host network device.
-ETEXI
-
- {
- .name = "netdev_del",
- .args_type = "id:s",
- .params = "id",
- .help = "remove host network device",
- .mhandler.cmd = hmp_netdev_del,
- .command_completion = netdev_del_completion,
- },
-
-STEXI
-@item netdev_del
-@findex netdev_del
-Remove host network device.
-ETEXI
-
- {
- .name = "object_add",
- .args_type = "object:O",
- .params = "[qom-type=]type,id=str[,prop=value][,...]",
- .help = "create QOM object",
- .mhandler.cmd = hmp_object_add,
- .command_completion = object_add_completion,
- },
-
-STEXI
-@item object_add
-@findex object_add
-Create QOM object.
-ETEXI
-
- {
- .name = "object_del",
- .args_type = "id:s",
- .params = "id",
- .help = "destroy QOM object",
- .mhandler.cmd = hmp_object_del,
- .command_completion = object_del_completion,
- },
-
-STEXI
-@item object_del
-@findex object_del
-Destroy QOM object.
-ETEXI
-
-#ifdef CONFIG_SLIRP
- {
- .name = "hostfwd_add",
- .args_type = "arg1:s,arg2:s?,arg3:s?",
- .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",
- .help = "redirect TCP or UDP connections from host to guest (requires -net user)",
- .mhandler.cmd = hmp_hostfwd_add,
- },
-#endif
-STEXI
-@item hostfwd_add
-@findex hostfwd_add
-Redirect TCP or UDP connections from host to guest (requires -net user).
-ETEXI
-
-#ifdef CONFIG_SLIRP
- {
- .name = "hostfwd_remove",
- .args_type = "arg1:s,arg2:s?,arg3:s?",
- .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport",
- .help = "remove host-to-guest TCP or UDP redirection",
- .mhandler.cmd = hmp_hostfwd_remove,
- },
-
-#endif
-STEXI
-@item hostfwd_remove
-@findex hostfwd_remove
-Remove host-to-guest TCP or UDP redirection.
-ETEXI
-
- {
- .name = "balloon",
- .args_type = "value:M",
- .params = "target",
- .help = "request VM to change its memory allocation (in MB)",
- .mhandler.cmd = hmp_balloon,
- },
-
-STEXI
-@item balloon @var{value}
-@findex balloon
-Request VM to change its memory allocation to @var{value} (in MB).
-ETEXI
-
- {
- .name = "set_link",
- .args_type = "name:s,up:b",
- .params = "name on|off",
- .help = "change the link status of a network adapter",
- .mhandler.cmd = hmp_set_link,
- .command_completion = set_link_completion,
- },
-
-STEXI
-@item set_link @var{name} [on|off]
-@findex set_link
-Switch link @var{name} on (i.e. up) or off (i.e. down).
-ETEXI
-
- {
- .name = "watchdog_action",
- .args_type = "action:s",
- .params = "[reset|shutdown|poweroff|pause|debug|none]",
- .help = "change watchdog action",
- .mhandler.cmd = hmp_watchdog_action,
- .command_completion = watchdog_action_completion,
- },
-
-STEXI
-@item watchdog_action
-@findex watchdog_action
-Change watchdog action.
-ETEXI
-
- {
- .name = "acl_show",
- .args_type = "aclname:s",
- .params = "aclname",
- .help = "list rules in the access control list",
- .mhandler.cmd = hmp_acl_show,
- },
-
-STEXI
-@item acl_show @var{aclname}
-@findex acl_show
-List all the matching rules in the access control list, and the default
-policy. There are currently two named access control lists,
-@var{vnc.x509dname} and @var{vnc.username} matching on the x509 client
-certificate distinguished name, and SASL username respectively.
-ETEXI
-
- {
- .name = "acl_policy",
- .args_type = "aclname:s,policy:s",
- .params = "aclname allow|deny",
- .help = "set default access control list policy",
- .mhandler.cmd = hmp_acl_policy,
- },
-
-STEXI
-@item acl_policy @var{aclname} @code{allow|deny}
-@findex acl_policy
-Set the default access control list policy, used in the event that
-none of the explicit rules match. The default policy at startup is
-always @code{deny}.
-ETEXI
-
- {
- .name = "acl_add",
- .args_type = "aclname:s,match:s,policy:s,index:i?",
- .params = "aclname match allow|deny [index]",
- .help = "add a match rule to the access control list",
- .mhandler.cmd = hmp_acl_add,
- },
-
-STEXI
-@item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}]
-@findex acl_add
-Add a match rule to the access control list, allowing or denying access.
-The match will normally be an exact username or x509 distinguished name,
-but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to
-allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will
-normally be appended to the end of the ACL, but can be inserted
-earlier in the list if the optional @var{index} parameter is supplied.
-ETEXI
-
- {
- .name = "acl_remove",
- .args_type = "aclname:s,match:s",
- .params = "aclname match",
- .help = "remove a match rule from the access control list",
- .mhandler.cmd = hmp_acl_remove,
- },
-
-STEXI
-@item acl_remove @var{aclname} @var{match}
-@findex acl_remove
-Remove the specified match rule from the access control list.
-ETEXI
-
- {
- .name = "acl_reset",
- .args_type = "aclname:s",
- .params = "aclname",
- .help = "reset the access control list",
- .mhandler.cmd = hmp_acl_reset,
- },
-
-STEXI
-@item acl_reset @var{aclname}
-@findex acl_reset
-Remove all matches from the access control list, and set the default
-policy back to @code{deny}.
-ETEXI
-
- {
- .name = "nbd_server_start",
- .args_type = "all:-a,writable:-w,uri:s",
- .params = "nbd_server_start [-a] [-w] host:port",
- .help = "serve block devices on the given host and port",
- .mhandler.cmd = hmp_nbd_server_start,
- },
-STEXI
-@item nbd_server_start @var{host}:@var{port}
-@findex nbd_server_start
-Start an NBD server on the given host and/or port. If the @option{-a}
-option is included, all of the virtual machine's block devices that
-have an inserted media on them are automatically exported; in this case,
-the @option{-w} option makes the devices writable too.
-ETEXI
-
- {
- .name = "nbd_server_add",
- .args_type = "writable:-w,device:B",
- .params = "nbd_server_add [-w] device",
- .help = "export a block device via NBD",
- .mhandler.cmd = hmp_nbd_server_add,
- },
-STEXI
-@item nbd_server_add @var{device}
-@findex nbd_server_add
-Export a block device through QEMU's NBD server, which must be started
-beforehand with @command{nbd_server_start}. The @option{-w} option makes the
-exported device writable too.
-ETEXI
-
- {
- .name = "nbd_server_stop",
- .args_type = "",
- .params = "nbd_server_stop",
- .help = "stop serving block devices using the NBD protocol",
- .mhandler.cmd = hmp_nbd_server_stop,
- },
-STEXI
-@item nbd_server_stop
-@findex nbd_server_stop
-Stop the QEMU embedded NBD server.
-ETEXI
-
-
-#if defined(TARGET_I386)
-
- {
- .name = "mce",
- .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l",
- .params = "[-b] cpu bank status mcgstatus addr misc",
- .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]",
- .mhandler.cmd = hmp_mce,
- },
-
-#endif
-STEXI
-@item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc}
-@findex mce (x86)
-Inject an MCE on the given CPU (x86 only).
-ETEXI
-
- {
- .name = "getfd",
- .args_type = "fdname:s",
- .params = "getfd name",
- .help = "receive a file descriptor via SCM rights and assign it a name",
- .mhandler.cmd = hmp_getfd,
- },
-
-STEXI
-@item getfd @var{fdname}
-@findex getfd
-If a file descriptor is passed alongside this command using the SCM_RIGHTS
-mechanism on unix sockets, it is stored using the name @var{fdname} for
-later use by other monitor commands.
-ETEXI
-
- {
- .name = "closefd",
- .args_type = "fdname:s",
- .params = "closefd name",
- .help = "close a file descriptor previously passed via SCM rights",
- .mhandler.cmd = hmp_closefd,
- },
-
-STEXI
-@item closefd @var{fdname}
-@findex closefd
-Close the file descriptor previously assigned to @var{fdname} using the
-@code{getfd} command. This is only needed if the file descriptor was never
-used by another monitor command.
-ETEXI
-
- {
- .name = "block_passwd",
- .args_type = "device:B,password:s",
- .params = "block_passwd device password",
- .help = "set the password of encrypted block devices",
- .mhandler.cmd = hmp_block_passwd,
- },
-
-STEXI
-@item block_passwd @var{device} @var{password}
-@findex block_passwd
-Set the encrypted device @var{device} password to @var{password}
-ETEXI
-
- {
- .name = "block_set_io_throttle",
- .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
- .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
- .help = "change I/O throttle limits for a block drive",
- .mhandler.cmd = hmp_block_set_io_throttle,
- },
-
-STEXI
-@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
-@findex block_set_io_throttle
-Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
-ETEXI
-
- {
- .name = "set_password",
- .args_type = "protocol:s,password:s,connected:s?",
- .params = "protocol password action-if-connected",
- .help = "set spice/vnc password",
- .mhandler.cmd = hmp_set_password,
- },
-
-STEXI
-@item set_password [ vnc | spice ] password [ action-if-connected ]
-@findex set_password
-Change spice/vnc password. Use zero to make the password stay valid
-forever. @var{action-if-connected} specifies what should happen in
-case a connection is established: @var{fail} makes the password change
-fail. @var{disconnect} changes the password and disconnects the
-client. @var{keep} changes the password and keeps the connection up.
-@var{keep} is the default.
-ETEXI
-
- {
- .name = "expire_password",
- .args_type = "protocol:s,time:s",
- .params = "protocol time",
- .help = "set spice/vnc password expire-time",
- .mhandler.cmd = hmp_expire_password,
- },
-
-STEXI
-@item expire_password [ vnc | spice ] expire-time
-@findex expire_password
-Specify when a password for spice/vnc becomes
-invalid. @var{expire-time} accepts:
-
-@table @var
-@item now
-Invalidate password instantly.
-
-@item never
-Password stays valid forever.
-
-@item +nsec
-Password stays valid for @var{nsec} seconds starting now.
-
-@item nsec
-Password is invalidated at the given time. @var{nsec} are the seconds
-passed since 1970, i.e. unix epoch.
-
-@end table
-ETEXI
-
- {
- .name = "chardev-add",
- .args_type = "args:s",
- .params = "args",
- .help = "add chardev",
- .mhandler.cmd = hmp_chardev_add,
- .command_completion = chardev_add_completion,
- },
-
-STEXI
-@item chardev-add args
-@findex chardev-add
-chardev_add accepts the same parameters as the -chardev command line switch.
-
-ETEXI
-
- {
- .name = "chardev-remove",
- .args_type = "id:s",
- .params = "id",
- .help = "remove chardev",
- .mhandler.cmd = hmp_chardev_remove,
- .command_completion = chardev_remove_completion,
- },
-
-STEXI
-@item chardev-remove id
-@findex chardev-remove
-Removes the chardev @var{id}.
-
-ETEXI
-
- {
- .name = "qemu-io",
- .args_type = "device:B,command:s",
- .params = "[device] \"[command]\"",
- .help = "run a qemu-io command on a block device",
- .mhandler.cmd = hmp_qemu_io,
- },
-
-STEXI
-@item qemu-io @var{device} @var{command}
-@findex qemu-io
-Executes a qemu-io command on the given block device.
-
-ETEXI
-
- {
- .name = "cpu-add",
- .args_type = "id:i",
- .params = "id",
- .help = "add cpu",
- .mhandler.cmd = hmp_cpu_add,
- },
-
-STEXI
-@item cpu-add @var{id}
-@findex cpu-add
-Add CPU with id @var{id}
-ETEXI
-
- {
- .name = "qom-list",
- .args_type = "path:s?",
- .params = "path",
- .help = "list QOM properties",
- .mhandler.cmd = hmp_qom_list,
- },
-
-STEXI
-@item qom-list [@var{path}]
-Print QOM properties of object at location @var{path}
-ETEXI
-
- {
- .name = "qom-set",
- .args_type = "path:s,property:s,value:s",
- .params = "path property value",
- .help = "set QOM property",
- .mhandler.cmd = hmp_qom_set,
- },
-
-STEXI
-@item qom-set @var{path} @var{property} @var{value}
-Set QOM property @var{property} of object at location @var{path} to value @var{value}
-ETEXI
-
- {
- .name = "info",
- .args_type = "item:s?",
- .params = "[subcommand]",
- .help = "show various information about the system state",
- .mhandler.cmd = hmp_info_help,
- .sub_table = info_cmds,
- },
-
-STEXI
-@end table
-ETEXI