diff options
Diffstat (limited to 'qemu/fpu')
| -rw-r--r-- | qemu/fpu/softfloat-macros.h | 793 | ||||
| -rw-r--r-- | qemu/fpu/softfloat-specialize.h | 1236 | ||||
| -rw-r--r-- | qemu/fpu/softfloat.c | 7733 |
3 files changed, 0 insertions, 9762 deletions
diff --git a/qemu/fpu/softfloat-macros.h b/qemu/fpu/softfloat-macros.h deleted file mode 100644 index 9cc6158cb..000000000 --- a/qemu/fpu/softfloat-macros.h +++ /dev/null @@ -1,793 +0,0 @@ -/* - * QEMU float support macros - * - * The code in this source file is derived from release 2a of the SoftFloat - * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and - * some later contributions) are provided under that license, as detailed below. - * It has subsequently been modified by contributors to the QEMU Project, - * so some portions are provided under: - * the SoftFloat-2a license - * the BSD license - * GPL-v2-or-later - * - * Any future contributions to this file after December 1st 2014 will be - * taken to be licensed under the Softfloat-2a license unless specifically - * indicated otherwise. - */ - -/* -=============================================================================== -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2a. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort -has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT -TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO -PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY -AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) they include prominent notice that the work is derivative, and (2) they -include prominent notice akin to these four paragraphs for those parts of -this code that are retained. - -=============================================================================== -*/ - -/* BSD licensing: - * Copyright (c) 2006, Fabrice Bellard - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors - * may be used to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* Portions of this work are licensed under the terms of the GNU GPL, - * version 2 or later. See the COPYING file in the top-level directory. - */ - -/*---------------------------------------------------------------------------- -| This macro tests for minimum version of the GNU C compiler. -*----------------------------------------------------------------------------*/ -#if defined(__GNUC__) && defined(__GNUC_MINOR__) -# define SOFTFLOAT_GNUC_PREREQ(maj, min) \ - ((__GNUC__ << 16) + __GNUC_MINOR__ >= ((maj) << 16) + (min)) -#else -# define SOFTFLOAT_GNUC_PREREQ(maj, min) 0 -#endif - - -/*---------------------------------------------------------------------------- -| Shifts `a' right by the number of bits given in `count'. If any nonzero -| bits are shifted off, they are ``jammed'' into the least significant bit of -| the result by setting the least significant bit to 1. The value of `count' -| can be arbitrarily large; in particular, if `count' is greater than 32, the -| result will be either 0 or 1, depending on whether `a' is zero or nonzero. -| The result is stored in the location pointed to by `zPtr'. -*----------------------------------------------------------------------------*/ - -static inline void shift32RightJamming(uint32_t a, int count, uint32_t *zPtr) -{ - uint32_t z; - - if ( count == 0 ) { - z = a; - } - else if ( count < 32 ) { - z = ( a>>count ) | ( ( a<<( ( - count ) & 31 ) ) != 0 ); - } - else { - z = ( a != 0 ); - } - *zPtr = z; - -} - -/*---------------------------------------------------------------------------- -| Shifts `a' right by the number of bits given in `count'. If any nonzero -| bits are shifted off, they are ``jammed'' into the least significant bit of -| the result by setting the least significant bit to 1. The value of `count' -| can be arbitrarily large; in particular, if `count' is greater than 64, the -| result will be either 0 or 1, depending on whether `a' is zero or nonzero. -| The result is stored in the location pointed to by `zPtr'. -*----------------------------------------------------------------------------*/ - -static inline void shift64RightJamming(uint64_t a, int count, uint64_t *zPtr) -{ - uint64_t z; - - if ( count == 0 ) { - z = a; - } - else if ( count < 64 ) { - z = ( a>>count ) | ( ( a<<( ( - count ) & 63 ) ) != 0 ); - } - else { - z = ( a != 0 ); - } - *zPtr = z; - -} - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by 64 -| _plus_ the number of bits given in `count'. The shifted result is at most -| 64 nonzero bits; this is stored at the location pointed to by `z0Ptr'. The -| bits shifted off form a second 64-bit result as follows: The _last_ bit -| shifted off is the most-significant bit of the extra result, and the other -| 63 bits of the extra result are all zero if and only if _all_but_the_last_ -| bits shifted off were all zero. This extra result is stored in the location -| pointed to by `z1Ptr'. The value of `count' can be arbitrarily large. -| (This routine makes more sense if `a0' and `a1' are considered to form a -| fixed-point value with binary point between `a0' and `a1'. This fixed-point -| value is shifted right by the number of bits given in `count', and the -| integer part of the result is returned at the location pointed to by -| `z0Ptr'. The fractional part of the result may be slightly corrupted as -| described above, and is returned at the location pointed to by `z1Ptr'.) -*----------------------------------------------------------------------------*/ - -static inline void - shift64ExtraRightJamming( - uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr) -{ - uint64_t z0, z1; - int8_t negCount = ( - count ) & 63; - - if ( count == 0 ) { - z1 = a1; - z0 = a0; - } - else if ( count < 64 ) { - z1 = ( a0<<negCount ) | ( a1 != 0 ); - z0 = a0>>count; - } - else { - if ( count == 64 ) { - z1 = a0 | ( a1 != 0 ); - } - else { - z1 = ( ( a0 | a1 ) != 0 ); - } - z0 = 0; - } - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the -| number of bits given in `count'. Any bits shifted off are lost. The value -| of `count' can be arbitrarily large; in particular, if `count' is greater -| than 128, the result will be 0. The result is broken into two 64-bit pieces -| which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - shift128Right( - uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr) -{ - uint64_t z0, z1; - int8_t negCount = ( - count ) & 63; - - if ( count == 0 ) { - z1 = a1; - z0 = a0; - } - else if ( count < 64 ) { - z1 = ( a0<<negCount ) | ( a1>>count ); - z0 = a0>>count; - } - else { - z1 = (count < 128) ? (a0 >> (count & 63)) : 0; - z0 = 0; - } - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the -| number of bits given in `count'. If any nonzero bits are shifted off, they -| are ``jammed'' into the least significant bit of the result by setting the -| least significant bit to 1. The value of `count' can be arbitrarily large; -| in particular, if `count' is greater than 128, the result will be either -| 0 or 1, depending on whether the concatenation of `a0' and `a1' is zero or -| nonzero. The result is broken into two 64-bit pieces which are stored at -| the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - shift128RightJamming( - uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr) -{ - uint64_t z0, z1; - int8_t negCount = ( - count ) & 63; - - if ( count == 0 ) { - z1 = a1; - z0 = a0; - } - else if ( count < 64 ) { - z1 = ( a0<<negCount ) | ( a1>>count ) | ( ( a1<<negCount ) != 0 ); - z0 = a0>>count; - } - else { - if ( count == 64 ) { - z1 = a0 | ( a1 != 0 ); - } - else if ( count < 128 ) { - z1 = ( a0>>( count & 63 ) ) | ( ( ( a0<<negCount ) | a1 ) != 0 ); - } - else { - z1 = ( ( a0 | a1 ) != 0 ); - } - z0 = 0; - } - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right -| by 64 _plus_ the number of bits given in `count'. The shifted result is -| at most 128 nonzero bits; these are broken into two 64-bit pieces which are -| stored at the locations pointed to by `z0Ptr' and `z1Ptr'. The bits shifted -| off form a third 64-bit result as follows: The _last_ bit shifted off is -| the most-significant bit of the extra result, and the other 63 bits of the -| extra result are all zero if and only if _all_but_the_last_ bits shifted off -| were all zero. This extra result is stored in the location pointed to by -| `z2Ptr'. The value of `count' can be arbitrarily large. -| (This routine makes more sense if `a0', `a1', and `a2' are considered -| to form a fixed-point value with binary point between `a1' and `a2'. This -| fixed-point value is shifted right by the number of bits given in `count', -| and the integer part of the result is returned at the locations pointed to -| by `z0Ptr' and `z1Ptr'. The fractional part of the result may be slightly -| corrupted as described above, and is returned at the location pointed to by -| `z2Ptr'.) -*----------------------------------------------------------------------------*/ - -static inline void - shift128ExtraRightJamming( - uint64_t a0, - uint64_t a1, - uint64_t a2, - int count, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr - ) -{ - uint64_t z0, z1, z2; - int8_t negCount = ( - count ) & 63; - - if ( count == 0 ) { - z2 = a2; - z1 = a1; - z0 = a0; - } - else { - if ( count < 64 ) { - z2 = a1<<negCount; - z1 = ( a0<<negCount ) | ( a1>>count ); - z0 = a0>>count; - } - else { - if ( count == 64 ) { - z2 = a1; - z1 = a0; - } - else { - a2 |= a1; - if ( count < 128 ) { - z2 = a0<<negCount; - z1 = a0>>( count & 63 ); - } - else { - z2 = ( count == 128 ) ? a0 : ( a0 != 0 ); - z1 = 0; - } - } - z0 = 0; - } - z2 |= ( a2 != 0 ); - } - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the -| number of bits given in `count'. Any bits shifted off are lost. The value -| of `count' must be less than 64. The result is broken into two 64-bit -| pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - shortShift128Left( - uint64_t a0, uint64_t a1, int count, uint64_t *z0Ptr, uint64_t *z1Ptr) -{ - - *z1Ptr = a1<<count; - *z0Ptr = - ( count == 0 ) ? a0 : ( a0<<count ) | ( a1>>( ( - count ) & 63 ) ); - -} - -/*---------------------------------------------------------------------------- -| Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' left -| by the number of bits given in `count'. Any bits shifted off are lost. -| The value of `count' must be less than 64. The result is broken into three -| 64-bit pieces which are stored at the locations pointed to by `z0Ptr', -| `z1Ptr', and `z2Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - shortShift192Left( - uint64_t a0, - uint64_t a1, - uint64_t a2, - int count, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr - ) -{ - uint64_t z0, z1, z2; - int8_t negCount; - - z2 = a2<<count; - z1 = a1<<count; - z0 = a0<<count; - if ( 0 < count ) { - negCount = ( ( - count ) & 63 ); - z1 |= a2>>negCount; - z0 |= a1>>negCount; - } - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit -| value formed by concatenating `b0' and `b1'. Addition is modulo 2^128, so -| any carry out is lost. The result is broken into two 64-bit pieces which -| are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - add128( - uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr ) -{ - uint64_t z1; - - z1 = a1 + b1; - *z1Ptr = z1; - *z0Ptr = a0 + b0 + ( z1 < a1 ); - -} - -/*---------------------------------------------------------------------------- -| Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the -| 192-bit value formed by concatenating `b0', `b1', and `b2'. Addition is -| modulo 2^192, so any carry out is lost. The result is broken into three -| 64-bit pieces which are stored at the locations pointed to by `z0Ptr', -| `z1Ptr', and `z2Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - add192( - uint64_t a0, - uint64_t a1, - uint64_t a2, - uint64_t b0, - uint64_t b1, - uint64_t b2, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr - ) -{ - uint64_t z0, z1, z2; - int8_t carry0, carry1; - - z2 = a2 + b2; - carry1 = ( z2 < a2 ); - z1 = a1 + b1; - carry0 = ( z1 < a1 ); - z0 = a0 + b0; - z1 += carry1; - z0 += ( z1 < carry1 ); - z0 += carry0; - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the -| 128-bit value formed by concatenating `a0' and `a1'. Subtraction is modulo -| 2^128, so any borrow out (carry out) is lost. The result is broken into two -| 64-bit pieces which are stored at the locations pointed to by `z0Ptr' and -| `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - sub128( - uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1, uint64_t *z0Ptr, uint64_t *z1Ptr ) -{ - - *z1Ptr = a1 - b1; - *z0Ptr = a0 - b0 - ( a1 < b1 ); - -} - -/*---------------------------------------------------------------------------- -| Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2' -| from the 192-bit value formed by concatenating `a0', `a1', and `a2'. -| Subtraction is modulo 2^192, so any borrow out (carry out) is lost. The -| result is broken into three 64-bit pieces which are stored at the locations -| pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - sub192( - uint64_t a0, - uint64_t a1, - uint64_t a2, - uint64_t b0, - uint64_t b1, - uint64_t b2, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr - ) -{ - uint64_t z0, z1, z2; - int8_t borrow0, borrow1; - - z2 = a2 - b2; - borrow1 = ( a2 < b2 ); - z1 = a1 - b1; - borrow0 = ( a1 < b1 ); - z0 = a0 - b0; - z0 -= ( z1 < borrow1 ); - z1 -= borrow1; - z0 -= borrow0; - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Multiplies `a' by `b' to obtain a 128-bit product. The product is broken -| into two 64-bit pieces which are stored at the locations pointed to by -| `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void mul64To128( uint64_t a, uint64_t b, uint64_t *z0Ptr, uint64_t *z1Ptr ) -{ - uint32_t aHigh, aLow, bHigh, bLow; - uint64_t z0, zMiddleA, zMiddleB, z1; - - aLow = a; - aHigh = a>>32; - bLow = b; - bHigh = b>>32; - z1 = ( (uint64_t) aLow ) * bLow; - zMiddleA = ( (uint64_t) aLow ) * bHigh; - zMiddleB = ( (uint64_t) aHigh ) * bLow; - z0 = ( (uint64_t) aHigh ) * bHigh; - zMiddleA += zMiddleB; - z0 += ( ( (uint64_t) ( zMiddleA < zMiddleB ) )<<32 ) + ( zMiddleA>>32 ); - zMiddleA <<= 32; - z1 += zMiddleA; - z0 += ( z1 < zMiddleA ); - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Multiplies the 128-bit value formed by concatenating `a0' and `a1' by -| `b' to obtain a 192-bit product. The product is broken into three 64-bit -| pieces which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and -| `z2Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - mul128By64To192( - uint64_t a0, - uint64_t a1, - uint64_t b, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr - ) -{ - uint64_t z0, z1, z2, more1; - - mul64To128( a1, b, &z1, &z2 ); - mul64To128( a0, b, &z0, &more1 ); - add128( z0, more1, 0, z1, &z0, &z1 ); - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the -| 128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit -| product. The product is broken into four 64-bit pieces which are stored at -| the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'. -*----------------------------------------------------------------------------*/ - -static inline void - mul128To256( - uint64_t a0, - uint64_t a1, - uint64_t b0, - uint64_t b1, - uint64_t *z0Ptr, - uint64_t *z1Ptr, - uint64_t *z2Ptr, - uint64_t *z3Ptr - ) -{ - uint64_t z0, z1, z2, z3; - uint64_t more1, more2; - - mul64To128( a1, b1, &z2, &z3 ); - mul64To128( a1, b0, &z1, &more2 ); - add128( z1, more2, 0, z2, &z1, &z2 ); - mul64To128( a0, b0, &z0, &more1 ); - add128( z0, more1, 0, z1, &z0, &z1 ); - mul64To128( a0, b1, &more1, &more2 ); - add128( more1, more2, 0, z2, &more1, &z2 ); - add128( z0, z1, 0, more1, &z0, &z1 ); - *z3Ptr = z3; - *z2Ptr = z2; - *z1Ptr = z1; - *z0Ptr = z0; - -} - -/*---------------------------------------------------------------------------- -| Returns an approximation to the 64-bit integer quotient obtained by dividing -| `b' into the 128-bit value formed by concatenating `a0' and `a1'. The -| divisor `b' must be at least 2^63. If q is the exact quotient truncated -| toward zero, the approximation returned lies between q and q + 2 inclusive. -| If the exact quotient q is larger than 64 bits, the maximum positive 64-bit -| unsigned integer is returned. -*----------------------------------------------------------------------------*/ - -static uint64_t estimateDiv128To64( uint64_t a0, uint64_t a1, uint64_t b ) -{ - uint64_t b0, b1; - uint64_t rem0, rem1, term0, term1; - uint64_t z; - - if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF ); - b0 = b>>32; - z = ( b0<<32 <= a0 ) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0 / b0 )<<32; - mul64To128( b, z, &term0, &term1 ); - sub128( a0, a1, term0, term1, &rem0, &rem1 ); - while ( ( (int64_t) rem0 ) < 0 ) { - z -= LIT64( 0x100000000 ); - b1 = b<<32; - add128( rem0, rem1, b0, b1, &rem0, &rem1 ); - } - rem0 = ( rem0<<32 ) | ( rem1>>32 ); - z |= ( b0<<32 <= rem0 ) ? 0xFFFFFFFF : rem0 / b0; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns an approximation to the square root of the 32-bit significand given -| by `a'. Considered as an integer, `a' must be at least 2^31. If bit 0 of -| `aExp' (the least significant bit) is 1, the integer returned approximates -| 2^31*sqrt(`a'/2^31), where `a' is considered an integer. If bit 0 of `aExp' -| is 0, the integer returned approximates 2^31*sqrt(`a'/2^30). In either -| case, the approximation returned lies strictly within +/-2 of the exact -| value. -*----------------------------------------------------------------------------*/ - -static uint32_t estimateSqrt32(int aExp, uint32_t a) -{ - static const uint16_t sqrtOddAdjustments[] = { - 0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0, - 0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67 - }; - static const uint16_t sqrtEvenAdjustments[] = { - 0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E, - 0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002 - }; - int8_t index; - uint32_t z; - - index = ( a>>27 ) & 15; - if ( aExp & 1 ) { - z = 0x4000 + ( a>>17 ) - sqrtOddAdjustments[ (int)index ]; - z = ( ( a / z )<<14 ) + ( z<<15 ); - a >>= 1; - } - else { - z = 0x8000 + ( a>>17 ) - sqrtEvenAdjustments[ (int)index ]; - z = a / z + z; - z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 ); - if ( z <= a ) return (uint32_t) ( ( (int32_t) a )>>1 ); - } - return ( (uint32_t) ( ( ( (uint64_t) a )<<31 ) / z ) ) + ( z>>1 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the number of leading 0 bits before the most-significant 1 bit of -| `a'. If `a' is zero, 32 is returned. -*----------------------------------------------------------------------------*/ - -static int8_t countLeadingZeros32( uint32_t a ) -{ -#if SOFTFLOAT_GNUC_PREREQ(3, 4) - if (a) { - return __builtin_clz(a); - } else { - return 32; - } -#else - static const int8_t countLeadingZerosHigh[] = { - 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 - }; - int8_t shiftCount; - - shiftCount = 0; - if ( a < 0x10000 ) { - shiftCount += 16; - a <<= 16; - } - if ( a < 0x1000000 ) { - shiftCount += 8; - a <<= 8; - } - shiftCount += countLeadingZerosHigh[ a>>24 ]; - return shiftCount; -#endif -} - -/*---------------------------------------------------------------------------- -| Returns the number of leading 0 bits before the most-significant 1 bit of -| `a'. If `a' is zero, 64 is returned. -*----------------------------------------------------------------------------*/ - -static int8_t countLeadingZeros64( uint64_t a ) -{ -#if SOFTFLOAT_GNUC_PREREQ(3, 4) - if (a) { - return __builtin_clzll(a); - } else { - return 64; - } -#else - int8_t shiftCount; - - shiftCount = 0; - if ( a < ( (uint64_t) 1 )<<32 ) { - shiftCount += 32; - } - else { - a >>= 32; - } - shiftCount += countLeadingZeros32( a ); - return shiftCount; -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' -| is equal to the 128-bit value formed by concatenating `b0' and `b1'. -| Otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -static inline flag eq128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 ) -{ - - return ( a0 == b0 ) && ( a1 == b1 ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less -| than or equal to the 128-bit value formed by concatenating `b0' and `b1'. -| Otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -static inline flag le128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 ) -{ - - return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 <= b1 ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less -| than the 128-bit value formed by concatenating `b0' and `b1'. Otherwise, -| returns 0. -*----------------------------------------------------------------------------*/ - -static inline flag lt128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 ) -{ - - return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 < b1 ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is -| not equal to the 128-bit value formed by concatenating `b0' and `b1'. -| Otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -static inline flag ne128( uint64_t a0, uint64_t a1, uint64_t b0, uint64_t b1 ) -{ - - return ( a0 != b0 ) || ( a1 != b1 ); - -} diff --git a/qemu/fpu/softfloat-specialize.h b/qemu/fpu/softfloat-specialize.h deleted file mode 100644 index a4cbdad45..000000000 --- a/qemu/fpu/softfloat-specialize.h +++ /dev/null @@ -1,1236 +0,0 @@ -/* - * QEMU float support - * - * The code in this source file is derived from release 2a of the SoftFloat - * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and - * some later contributions) are provided under that license, as detailed below. - * It has subsequently been modified by contributors to the QEMU Project, - * so some portions are provided under: - * the SoftFloat-2a license - * the BSD license - * GPL-v2-or-later - * - * Any future contributions to this file after December 1st 2014 will be - * taken to be licensed under the Softfloat-2a license unless specifically - * indicated otherwise. - */ - -/* -=============================================================================== -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2a. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort -has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT -TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO -PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY -AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) they include prominent notice that the work is derivative, and (2) they -include prominent notice akin to these four paragraphs for those parts of -this code that are retained. - -=============================================================================== -*/ - -/* BSD licensing: - * Copyright (c) 2006, Fabrice Bellard - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors - * may be used to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* Portions of this work are licensed under the terms of the GNU GPL, - * version 2 or later. See the COPYING file in the top-level directory. - */ - -/* Does the target distinguish signaling NaNs from non-signaling NaNs - * by setting the most significant bit of the mantissa for a signaling NaN? - * (The more common choice is to have it be zero for SNaN and one for QNaN.) - */ -#if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) -#define SNAN_BIT_IS_ONE 1 -#else -#define SNAN_BIT_IS_ONE 0 -#endif - -#if defined(TARGET_XTENSA) -/* Define for architectures which deviate from IEEE in not supporting - * signaling NaNs (so all NaNs are treated as quiet). - */ -#define NO_SIGNALING_NANS 1 -#endif - -/*---------------------------------------------------------------------------- -| The pattern for a default generated half-precision NaN. -*----------------------------------------------------------------------------*/ -#if defined(TARGET_ARM) -const float16 float16_default_nan = const_float16(0x7E00); -#elif SNAN_BIT_IS_ONE -const float16 float16_default_nan = const_float16(0x7DFF); -#else -const float16 float16_default_nan = const_float16(0xFE00); -#endif - -/*---------------------------------------------------------------------------- -| The pattern for a default generated single-precision NaN. -*----------------------------------------------------------------------------*/ -#if defined(TARGET_SPARC) -const float32 float32_default_nan = const_float32(0x7FFFFFFF); -#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) || \ - defined(TARGET_XTENSA) || defined(TARGET_S390X) || defined(TARGET_TRICORE) -const float32 float32_default_nan = const_float32(0x7FC00000); -#elif SNAN_BIT_IS_ONE -const float32 float32_default_nan = const_float32(0x7FBFFFFF); -#else -const float32 float32_default_nan = const_float32(0xFFC00000); -#endif - -/*---------------------------------------------------------------------------- -| The pattern for a default generated double-precision NaN. -*----------------------------------------------------------------------------*/ -#if defined(TARGET_SPARC) -const float64 float64_default_nan = const_float64(LIT64( 0x7FFFFFFFFFFFFFFF )); -#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) || \ - defined(TARGET_S390X) -const float64 float64_default_nan = const_float64(LIT64( 0x7FF8000000000000 )); -#elif SNAN_BIT_IS_ONE -const float64 float64_default_nan = const_float64(LIT64(0x7FF7FFFFFFFFFFFF)); -#else -const float64 float64_default_nan = const_float64(LIT64( 0xFFF8000000000000 )); -#endif - -/*---------------------------------------------------------------------------- -| The pattern for a default generated extended double-precision NaN. -*----------------------------------------------------------------------------*/ -#if SNAN_BIT_IS_ONE -#define floatx80_default_nan_high 0x7FFF -#define floatx80_default_nan_low LIT64(0xBFFFFFFFFFFFFFFF) -#else -#define floatx80_default_nan_high 0xFFFF -#define floatx80_default_nan_low LIT64( 0xC000000000000000 ) -#endif - -const floatx80 floatx80_default_nan - = make_floatx80_init(floatx80_default_nan_high, floatx80_default_nan_low); - -/*---------------------------------------------------------------------------- -| The pattern for a default generated quadruple-precision NaN. The `high' and -| `low' values hold the most- and least-significant bits, respectively. -*----------------------------------------------------------------------------*/ -#if SNAN_BIT_IS_ONE -#define float128_default_nan_high LIT64(0x7FFF7FFFFFFFFFFF) -#define float128_default_nan_low LIT64(0xFFFFFFFFFFFFFFFF) -#elif defined(TARGET_S390X) -#define float128_default_nan_high LIT64( 0x7FFF800000000000 ) -#define float128_default_nan_low LIT64( 0x0000000000000000 ) -#else -#define float128_default_nan_high LIT64( 0xFFFF800000000000 ) -#define float128_default_nan_low LIT64( 0x0000000000000000 ) -#endif - -const float128 float128_default_nan - = make_float128_init(float128_default_nan_high, float128_default_nan_low); - -/*---------------------------------------------------------------------------- -| Raises the exceptions specified by `flags'. Floating-point traps can be -| defined here if desired. It is currently not possible for such a trap -| to substitute a result value. If traps are not implemented, this routine -| should be simply `float_exception_flags |= flags;'. -*----------------------------------------------------------------------------*/ - -void float_raise(int8_t flags, float_status *status) -{ - status->float_exception_flags |= flags; -} - -/*---------------------------------------------------------------------------- -| Internal canonical NaN format. -*----------------------------------------------------------------------------*/ -typedef struct { - flag sign; - uint64_t high, low; -} commonNaNT; - -#ifdef NO_SIGNALING_NANS -int float16_is_quiet_nan(float16 a_) -{ - return float16_is_any_nan(a_); -} - -int float16_is_signaling_nan(float16 a_) -{ - return 0; -} -#else -/*---------------------------------------------------------------------------- -| Returns 1 if the half-precision floating-point value `a' is a quiet -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float16_is_quiet_nan(float16 a_) -{ - uint16_t a = float16_val(a_); -#if SNAN_BIT_IS_ONE - return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF); -#else - return ((a & ~0x8000) >= 0x7c80); -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the half-precision floating-point value `a' is a signaling -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float16_is_signaling_nan(float16 a_) -{ - uint16_t a = float16_val(a_); -#if SNAN_BIT_IS_ONE - return ((a & ~0x8000) >= 0x7c80); -#else - return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF); -#endif -} -#endif - -/*---------------------------------------------------------------------------- -| Returns a quiet NaN if the half-precision floating point value `a' is a -| signaling NaN; otherwise returns `a'. -*----------------------------------------------------------------------------*/ -float16 float16_maybe_silence_nan(float16 a_) -{ - if (float16_is_signaling_nan(a_)) { -#if SNAN_BIT_IS_ONE -# if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) - return float16_default_nan; -# else -# error Rules for silencing a signaling NaN are target-specific -# endif -#else - uint16_t a = float16_val(a_); - a |= (1 << 9); - return make_float16(a); -#endif - } - return a_; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the half-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float16ToCommonNaN(float16 a, float_status *status) -{ - commonNaNT z; - - if (float16_is_signaling_nan(a)) { - float_raise(float_flag_invalid, status); - } - z.sign = float16_val(a) >> 15; - z.low = 0; - z.high = ((uint64_t) float16_val(a))<<54; - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the half- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float16 commonNaNToFloat16(commonNaNT a, float_status *status) -{ - uint16_t mantissa = a.high>>54; - - if (status->default_nan_mode) { - return float16_default_nan; - } - - if (mantissa) { - return make_float16(((((uint16_t) a.sign) << 15) - | (0x1F << 10) | mantissa)); - } else { - return float16_default_nan; - } -} - -#ifdef NO_SIGNALING_NANS -int float32_is_quiet_nan(float32 a_) -{ - return float32_is_any_nan(a_); -} - -int float32_is_signaling_nan(float32 a_) -{ - return 0; -} -#else -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a quiet -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float32_is_quiet_nan( float32 a_ ) -{ - uint32_t a = float32_val(a_); -#if SNAN_BIT_IS_ONE - return (((a >> 22) & 0x1ff) == 0x1fe) && (a & 0x003fffff); -#else - return ((uint32_t)(a << 1) >= 0xff800000); -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a signaling -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float32_is_signaling_nan( float32 a_ ) -{ - uint32_t a = float32_val(a_); -#if SNAN_BIT_IS_ONE - return ((uint32_t)(a << 1) >= 0xff800000); -#else - return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF ); -#endif -} -#endif - -/*---------------------------------------------------------------------------- -| Returns a quiet NaN if the single-precision floating point value `a' is a -| signaling NaN; otherwise returns `a'. -*----------------------------------------------------------------------------*/ - -float32 float32_maybe_silence_nan( float32 a_ ) -{ - if (float32_is_signaling_nan(a_)) { -#if SNAN_BIT_IS_ONE -# if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) - return float32_default_nan; -# else -# error Rules for silencing a signaling NaN are target-specific -# endif -#else - uint32_t a = float32_val(a_); - a |= (1 << 22); - return make_float32(a); -#endif - } - return a_; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float32ToCommonNaN(float32 a, float_status *status) -{ - commonNaNT z; - - if (float32_is_signaling_nan(a)) { - float_raise(float_flag_invalid, status); - } - z.sign = float32_val(a)>>31; - z.low = 0; - z.high = ( (uint64_t) float32_val(a) )<<41; - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the single- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float32 commonNaNToFloat32(commonNaNT a, float_status *status) -{ - uint32_t mantissa = a.high>>41; - - if (status->default_nan_mode) { - return float32_default_nan; - } - - if ( mantissa ) - return make_float32( - ( ( (uint32_t) a.sign )<<31 ) | 0x7F800000 | ( a.high>>41 ) ); - else - return float32_default_nan; -} - -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a two-input operation. -| IEEE754 doesn't specify all the details of this, so the -| algorithm is target-specific. -| The routine is passed various bits of information about the -| two NaNs and should return 0 to select NaN a and 1 for NaN b. -| Note that signalling NaNs are always squashed to quiet NaNs -| by the caller, by calling floatXX_maybe_silence_nan() before -| returning them. -| -| aIsLargerSignificand is only valid if both a and b are NaNs -| of some kind, and is true if a has the larger significand, -| or if both a and b have the same significand but a is -| positive but b is negative. It is only needed for the x87 -| tie-break rule. -*----------------------------------------------------------------------------*/ - -#if defined(TARGET_ARM) -static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag aIsLargerSignificand) -{ - /* ARM mandated NaN propagation rules: take the first of: - * 1. A if it is signaling - * 2. B if it is signaling - * 3. A (quiet) - * 4. B (quiet) - * A signaling NaN is always quietened before returning it. - */ - if (aIsSNaN) { - return 0; - } else if (bIsSNaN) { - return 1; - } else if (aIsQNaN) { - return 0; - } else { - return 1; - } -} -#elif defined(TARGET_MIPS) -static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag aIsLargerSignificand) -{ - /* According to MIPS specifications, if one of the two operands is - * a sNaN, a new qNaN has to be generated. This is done in - * floatXX_maybe_silence_nan(). For qNaN inputs the specifications - * says: "When possible, this QNaN result is one of the operand QNaN - * values." In practice it seems that most implementations choose - * the first operand if both operands are qNaN. In short this gives - * the following rules: - * 1. A if it is signaling - * 2. B if it is signaling - * 3. A (quiet) - * 4. B (quiet) - * A signaling NaN is always silenced before returning it. - */ - if (aIsSNaN) { - return 0; - } else if (bIsSNaN) { - return 1; - } else if (aIsQNaN) { - return 0; - } else { - return 1; - } -} -#elif defined(TARGET_PPC) || defined(TARGET_XTENSA) -static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag aIsLargerSignificand) -{ - /* PowerPC propagation rules: - * 1. A if it sNaN or qNaN - * 2. B if it sNaN or qNaN - * A signaling NaN is always silenced before returning it. - */ - if (aIsSNaN || aIsQNaN) { - return 0; - } else { - return 1; - } -} -#else -static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag aIsLargerSignificand) -{ - /* This implements x87 NaN propagation rules: - * SNaN + QNaN => return the QNaN - * two SNaNs => return the one with the larger significand, silenced - * two QNaNs => return the one with the larger significand - * SNaN and a non-NaN => return the SNaN, silenced - * QNaN and a non-NaN => return the QNaN - * - * If we get down to comparing significands and they are the same, - * return the NaN with the positive sign bit (if any). - */ - if (aIsSNaN) { - if (bIsSNaN) { - return aIsLargerSignificand ? 0 : 1; - } - return bIsQNaN ? 1 : 0; - } - else if (aIsQNaN) { - if (bIsSNaN || !bIsQNaN) - return 0; - else { - return aIsLargerSignificand ? 0 : 1; - } - } else { - return 1; - } -} -#endif - -/*---------------------------------------------------------------------------- -| Select which NaN to propagate for a three-input operation. -| For the moment we assume that no CPU needs the 'larger significand' -| information. -| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN -*----------------------------------------------------------------------------*/ -#if defined(TARGET_ARM) -static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag cIsQNaN, flag cIsSNaN, flag infzero, - float_status *status) -{ - /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero && cIsQNaN) { - float_raise(float_flag_invalid, status); - return 3; - } - - /* This looks different from the ARM ARM pseudocode, because the ARM ARM - * puts the operands to a fused mac operation (a*b)+c in the order c,a,b. - */ - if (cIsSNaN) { - return 2; - } else if (aIsSNaN) { - return 0; - } else if (bIsSNaN) { - return 1; - } else if (cIsQNaN) { - return 2; - } else if (aIsQNaN) { - return 0; - } else { - return 1; - } -} -#elif defined(TARGET_MIPS) -static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag cIsQNaN, flag cIsSNaN, flag infzero, - float_status *status) -{ - /* For MIPS, the (inf,zero,qnan) case sets InvalidOp and returns - * the default NaN - */ - if (infzero) { - float_raise(float_flag_invalid, status); - return 3; - } - - /* Prefer sNaN over qNaN, in the a, b, c order. */ - if (aIsSNaN) { - return 0; - } else if (bIsSNaN) { - return 1; - } else if (cIsSNaN) { - return 2; - } else if (aIsQNaN) { - return 0; - } else if (bIsQNaN) { - return 1; - } else { - return 2; - } -} -#elif defined(TARGET_PPC) -static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag cIsQNaN, flag cIsSNaN, flag infzero, - float_status *status) -{ - /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer - * to return an input NaN if we have one (ie c) rather than generating - * a default NaN - */ - if (infzero) { - float_raise(float_flag_invalid, status); - return 2; - } - - /* If fRA is a NaN return it; otherwise if fRB is a NaN return it; - * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB - */ - if (aIsSNaN || aIsQNaN) { - return 0; - } else if (cIsSNaN || cIsQNaN) { - return 2; - } else { - return 1; - } -} -#else -/* A default implementation: prefer a to b to c. - * This is unlikely to actually match any real implementation. - */ -static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN, - flag cIsQNaN, flag cIsSNaN, flag infzero, - float_status *status) -{ - if (aIsSNaN || aIsQNaN) { - return 0; - } else if (bIsSNaN || bIsQNaN) { - return 1; - } else { - return 2; - } -} -#endif - -/*---------------------------------------------------------------------------- -| Takes two single-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static float32 propagateFloat32NaN(float32 a, float32 b, float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN; - flag aIsLargerSignificand; - uint32_t av, bv; - - aIsQuietNaN = float32_is_quiet_nan( a ); - aIsSignalingNaN = float32_is_signaling_nan( a ); - bIsQuietNaN = float32_is_quiet_nan( b ); - bIsSignalingNaN = float32_is_signaling_nan( b ); - av = float32_val(a); - bv = float32_val(b); - - if (aIsSignalingNaN | bIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) - return float32_default_nan; - - if ((uint32_t)(av<<1) < (uint32_t)(bv<<1)) { - aIsLargerSignificand = 0; - } else if ((uint32_t)(bv<<1) < (uint32_t)(av<<1)) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (av < bv) ? 1 : 0; - } - - if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - aIsLargerSignificand)) { - return float32_maybe_silence_nan(b); - } else { - return float32_maybe_silence_nan(a); - } -} - -/*---------------------------------------------------------------------------- -| Takes three single-precision floating-point values `a', `b' and `c', one of -| which is a NaN, and returns the appropriate NaN result. If any of `a', -| `b' or `c' is a signaling NaN, the invalid exception is raised. -| The input infzero indicates whether a*b was 0*inf or inf*0 (in which case -| obviously c is a NaN, and whether to propagate c or some other NaN is -| implementation defined). -*----------------------------------------------------------------------------*/ - -static float32 propagateFloat32MulAddNaN(float32 a, float32 b, - float32 c, flag infzero, - float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - cIsQuietNaN, cIsSignalingNaN; - int which; - - aIsQuietNaN = float32_is_quiet_nan(a); - aIsSignalingNaN = float32_is_signaling_nan(a); - bIsQuietNaN = float32_is_quiet_nan(b); - bIsSignalingNaN = float32_is_signaling_nan(b); - cIsQuietNaN = float32_is_quiet_nan(c); - cIsSignalingNaN = float32_is_signaling_nan(c); - - if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN, - bIsQuietNaN, bIsSignalingNaN, - cIsQuietNaN, cIsSignalingNaN, infzero, status); - - if (status->default_nan_mode) { - /* Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag. - */ - return float32_default_nan; - } - - switch (which) { - case 0: - return float32_maybe_silence_nan(a); - case 1: - return float32_maybe_silence_nan(b); - case 2: - return float32_maybe_silence_nan(c); - case 3: - default: - return float32_default_nan; - } -} - -#ifdef NO_SIGNALING_NANS -int float64_is_quiet_nan(float64 a_) -{ - return float64_is_any_nan(a_); -} - -int float64_is_signaling_nan(float64 a_) -{ - return 0; -} -#else -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is a quiet -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float64_is_quiet_nan( float64 a_ ) -{ - uint64_t a = float64_val(a_); -#if SNAN_BIT_IS_ONE - return (((a >> 51) & 0xfff) == 0xffe) - && (a & 0x0007ffffffffffffULL); -#else - return ((a << 1) >= 0xfff0000000000000ULL); -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is a signaling -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float64_is_signaling_nan( float64 a_ ) -{ - uint64_t a = float64_val(a_); -#if SNAN_BIT_IS_ONE - return ((a << 1) >= 0xfff0000000000000ULL); -#else - return - ( ( ( a>>51 ) & 0xFFF ) == 0xFFE ) - && ( a & LIT64( 0x0007FFFFFFFFFFFF ) ); -#endif -} -#endif - -/*---------------------------------------------------------------------------- -| Returns a quiet NaN if the double-precision floating point value `a' is a -| signaling NaN; otherwise returns `a'. -*----------------------------------------------------------------------------*/ - -float64 float64_maybe_silence_nan( float64 a_ ) -{ - if (float64_is_signaling_nan(a_)) { -#if SNAN_BIT_IS_ONE -# if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) - return float64_default_nan; -# else -# error Rules for silencing a signaling NaN are target-specific -# endif -#else - uint64_t a = float64_val(a_); - a |= LIT64( 0x0008000000000000 ); - return make_float64(a); -#endif - } - return a_; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float64ToCommonNaN(float64 a, float_status *status) -{ - commonNaNT z; - - if (float64_is_signaling_nan(a)) { - float_raise(float_flag_invalid, status); - } - z.sign = float64_val(a)>>63; - z.low = 0; - z.high = float64_val(a)<<12; - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the double- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float64 commonNaNToFloat64(commonNaNT a, float_status *status) -{ - uint64_t mantissa = a.high>>12; - - if (status->default_nan_mode) { - return float64_default_nan; - } - - if ( mantissa ) - return make_float64( - ( ( (uint64_t) a.sign )<<63 ) - | LIT64( 0x7FF0000000000000 ) - | ( a.high>>12 )); - else - return float64_default_nan; -} - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static float64 propagateFloat64NaN(float64 a, float64 b, float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN; - flag aIsLargerSignificand; - uint64_t av, bv; - - aIsQuietNaN = float64_is_quiet_nan( a ); - aIsSignalingNaN = float64_is_signaling_nan( a ); - bIsQuietNaN = float64_is_quiet_nan( b ); - bIsSignalingNaN = float64_is_signaling_nan( b ); - av = float64_val(a); - bv = float64_val(b); - - if (aIsSignalingNaN | bIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) - return float64_default_nan; - - if ((uint64_t)(av<<1) < (uint64_t)(bv<<1)) { - aIsLargerSignificand = 0; - } else if ((uint64_t)(bv<<1) < (uint64_t)(av<<1)) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (av < bv) ? 1 : 0; - } - - if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - aIsLargerSignificand)) { - return float64_maybe_silence_nan(b); - } else { - return float64_maybe_silence_nan(a); - } -} - -/*---------------------------------------------------------------------------- -| Takes three double-precision floating-point values `a', `b' and `c', one of -| which is a NaN, and returns the appropriate NaN result. If any of `a', -| `b' or `c' is a signaling NaN, the invalid exception is raised. -| The input infzero indicates whether a*b was 0*inf or inf*0 (in which case -| obviously c is a NaN, and whether to propagate c or some other NaN is -| implementation defined). -*----------------------------------------------------------------------------*/ - -static float64 propagateFloat64MulAddNaN(float64 a, float64 b, - float64 c, flag infzero, - float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - cIsQuietNaN, cIsSignalingNaN; - int which; - - aIsQuietNaN = float64_is_quiet_nan(a); - aIsSignalingNaN = float64_is_signaling_nan(a); - bIsQuietNaN = float64_is_quiet_nan(b); - bIsSignalingNaN = float64_is_signaling_nan(b); - cIsQuietNaN = float64_is_quiet_nan(c); - cIsSignalingNaN = float64_is_signaling_nan(c); - - if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN, - bIsQuietNaN, bIsSignalingNaN, - cIsQuietNaN, cIsSignalingNaN, infzero, status); - - if (status->default_nan_mode) { - /* Note that this check is after pickNaNMulAdd so that function - * has an opportunity to set the Invalid flag. - */ - return float64_default_nan; - } - - switch (which) { - case 0: - return float64_maybe_silence_nan(a); - case 1: - return float64_maybe_silence_nan(b); - case 2: - return float64_maybe_silence_nan(c); - case 3: - default: - return float64_default_nan; - } -} - -#ifdef NO_SIGNALING_NANS -int floatx80_is_quiet_nan(floatx80 a_) -{ - return floatx80_is_any_nan(a_); -} - -int floatx80_is_signaling_nan(floatx80 a_) -{ - return 0; -} -#else -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is a -| quiet NaN; otherwise returns 0. This slightly differs from the same -| function for other types as floatx80 has an explicit bit. -*----------------------------------------------------------------------------*/ - -int floatx80_is_quiet_nan( floatx80 a ) -{ -#if SNAN_BIT_IS_ONE - uint64_t aLow; - - aLow = a.low & ~0x4000000000000000ULL; - return ((a.high & 0x7fff) == 0x7fff) - && (aLow << 1) - && (a.low == aLow); -#else - return ( ( a.high & 0x7FFF ) == 0x7FFF ) - && (LIT64( 0x8000000000000000 ) <= ((uint64_t) ( a.low<<1 ))); -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is a -| signaling NaN; otherwise returns 0. This slightly differs from the same -| function for other types as floatx80 has an explicit bit. -*----------------------------------------------------------------------------*/ - -int floatx80_is_signaling_nan( floatx80 a ) -{ -#if SNAN_BIT_IS_ONE - return ((a.high & 0x7fff) == 0x7fff) - && ((a.low << 1) >= 0x8000000000000000ULL); -#else - uint64_t aLow; - - aLow = a.low & ~ LIT64( 0x4000000000000000 ); - return - ( ( a.high & 0x7FFF ) == 0x7FFF ) - && (uint64_t) ( aLow<<1 ) - && ( a.low == aLow ); -#endif -} -#endif - -/*---------------------------------------------------------------------------- -| Returns a quiet NaN if the extended double-precision floating point value -| `a' is a signaling NaN; otherwise returns `a'. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_maybe_silence_nan( floatx80 a ) -{ - if (floatx80_is_signaling_nan(a)) { -#if SNAN_BIT_IS_ONE -# if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) - a.low = floatx80_default_nan_low; - a.high = floatx80_default_nan_high; -# else -# error Rules for silencing a signaling NaN are target-specific -# endif -#else - a.low |= LIT64( 0xC000000000000000 ); - return a; -#endif - } - return a; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the -| invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT floatx80ToCommonNaN(floatx80 a, float_status *status) -{ - commonNaNT z; - - if (floatx80_is_signaling_nan(a)) { - float_raise(float_flag_invalid, status); - } - if ( a.low >> 63 ) { - z.sign = a.high >> 15; - z.low = 0; - z.high = a.low << 1; - } else { - z.sign = floatx80_default_nan_high >> 15; - z.low = 0; - z.high = floatx80_default_nan_low << 1; - } - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the extended -| double-precision floating-point format. -*----------------------------------------------------------------------------*/ - -static floatx80 commonNaNToFloatx80(commonNaNT a, float_status *status) -{ - floatx80 z; - - if (status->default_nan_mode) { - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - - if (a.high >> 1) { - z.low = LIT64( 0x8000000000000000 ) | a.high >> 1; - z.high = ( ( (uint16_t) a.sign )<<15 ) | 0x7FFF; - } else { - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - } - - return z; -} - -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, - float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN; - flag aIsLargerSignificand; - - aIsQuietNaN = floatx80_is_quiet_nan( a ); - aIsSignalingNaN = floatx80_is_signaling_nan( a ); - bIsQuietNaN = floatx80_is_quiet_nan( b ); - bIsSignalingNaN = floatx80_is_signaling_nan( b ); - - if (aIsSignalingNaN | bIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - a.low = floatx80_default_nan_low; - a.high = floatx80_default_nan_high; - return a; - } - - if (a.low < b.low) { - aIsLargerSignificand = 0; - } else if (b.low < a.low) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - aIsLargerSignificand)) { - return floatx80_maybe_silence_nan(b); - } else { - return floatx80_maybe_silence_nan(a); - } -} - -#ifdef NO_SIGNALING_NANS -int float128_is_quiet_nan(float128 a_) -{ - return float128_is_any_nan(a_); -} - -int float128_is_signaling_nan(float128 a_) -{ - return 0; -} -#else -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is a quiet -| NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float128_is_quiet_nan( float128 a ) -{ -#if SNAN_BIT_IS_ONE - return (((a.high >> 47) & 0xffff) == 0xfffe) - && (a.low || (a.high & 0x00007fffffffffffULL)); -#else - return - ((a.high << 1) >= 0xffff000000000000ULL) - && (a.low || (a.high & 0x0000ffffffffffffULL)); -#endif -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is a -| signaling NaN; otherwise returns 0. -*----------------------------------------------------------------------------*/ - -int float128_is_signaling_nan( float128 a ) -{ -#if SNAN_BIT_IS_ONE - return - ((a.high << 1) >= 0xffff000000000000ULL) - && (a.low || (a.high & 0x0000ffffffffffffULL)); -#else - return - ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE ) - && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) ); -#endif -} -#endif - -/*---------------------------------------------------------------------------- -| Returns a quiet NaN if the quadruple-precision floating point value `a' is -| a signaling NaN; otherwise returns `a'. -*----------------------------------------------------------------------------*/ - -float128 float128_maybe_silence_nan( float128 a ) -{ - if (float128_is_signaling_nan(a)) { -#if SNAN_BIT_IS_ONE -# if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32) - a.low = float128_default_nan_low; - a.high = float128_default_nan_high; -# else -# error Rules for silencing a signaling NaN are target-specific -# endif -#else - a.high |= LIT64( 0x0000800000000000 ); - return a; -#endif - } - return a; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float128ToCommonNaN(float128 a, float_status *status) -{ - commonNaNT z; - - if (float128_is_signaling_nan(a)) { - float_raise(float_flag_invalid, status); - } - z.sign = a.high>>63; - shortShift128Left( a.high, a.low, 16, &z.high, &z.low ); - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the quadruple- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float128 commonNaNToFloat128(commonNaNT a, float_status *status) -{ - float128 z; - - if (status->default_nan_mode) { - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - - shift128Right( a.high, a.low, 16, &z.high, &z.low ); - z.high |= ( ( (uint64_t) a.sign )<<63 ) | LIT64( 0x7FFF000000000000 ); - return z; -} - -/*---------------------------------------------------------------------------- -| Takes two quadruple-precision floating-point values `a' and `b', one of -| which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static float128 propagateFloat128NaN(float128 a, float128 b, - float_status *status) -{ - flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN; - flag aIsLargerSignificand; - - aIsQuietNaN = float128_is_quiet_nan( a ); - aIsSignalingNaN = float128_is_signaling_nan( a ); - bIsQuietNaN = float128_is_quiet_nan( b ); - bIsSignalingNaN = float128_is_signaling_nan( b ); - - if (aIsSignalingNaN | bIsSignalingNaN) { - float_raise(float_flag_invalid, status); - } - - if (status->default_nan_mode) { - a.low = float128_default_nan_low; - a.high = float128_default_nan_high; - return a; - } - - if (lt128(a.high<<1, a.low, b.high<<1, b.low)) { - aIsLargerSignificand = 0; - } else if (lt128(b.high<<1, b.low, a.high<<1, a.low)) { - aIsLargerSignificand = 1; - } else { - aIsLargerSignificand = (a.high < b.high) ? 1 : 0; - } - - if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN, - aIsLargerSignificand)) { - return float128_maybe_silence_nan(b); - } else { - return float128_maybe_silence_nan(a); - } -} - diff --git a/qemu/fpu/softfloat.c b/qemu/fpu/softfloat.c deleted file mode 100644 index 166c48e43..000000000 --- a/qemu/fpu/softfloat.c +++ /dev/null @@ -1,7733 +0,0 @@ -/* - * QEMU float support - * - * The code in this source file is derived from release 2a of the SoftFloat - * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and - * some later contributions) are provided under that license, as detailed below. - * It has subsequently been modified by contributors to the QEMU Project, - * so some portions are provided under: - * the SoftFloat-2a license - * the BSD license - * GPL-v2-or-later - * - * Any future contributions to this file after December 1st 2014 will be - * taken to be licensed under the Softfloat-2a license unless specifically - * indicated otherwise. - */ - -/* -=============================================================================== -This C source file is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2a. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort -has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT -TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO -PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY -AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) they include prominent notice that the work is derivative, and (2) they -include prominent notice akin to these four paragraphs for those parts of -this code that are retained. - -=============================================================================== -*/ - -/* BSD licensing: - * Copyright (c) 2006, Fabrice Bellard - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its contributors - * may be used to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* Portions of this work are licensed under the terms of the GNU GPL, - * version 2 or later. See the COPYING file in the top-level directory. - */ - -/* softfloat (and in particular the code in softfloat-specialize.h) is - * target-dependent and needs the TARGET_* macros. - */ -#include "qemu/osdep.h" - -#include "fpu/softfloat.h" - -/* We only need stdlib for abort() */ - -/*---------------------------------------------------------------------------- -| Primitive arithmetic functions, including multi-word arithmetic, and -| division and square root approximations. (Can be specialized to target if -| desired.) -*----------------------------------------------------------------------------*/ -#include "softfloat-macros.h" - -/*---------------------------------------------------------------------------- -| Functions and definitions to determine: (1) whether tininess for underflow -| is detected before or after rounding by default, (2) what (if anything) -| happens when exceptions are raised, (3) how signaling NaNs are distinguished -| from quiet NaNs, (4) the default generated quiet NaNs, and (5) how NaNs -| are propagated from function inputs to output. These details are target- -| specific. -*----------------------------------------------------------------------------*/ -#include "softfloat-specialize.h" - -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the half-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint32_t extractFloat16Frac(float16 a) -{ - return float16_val(a) & 0x3ff; -} - -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the half-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline int extractFloat16Exp(float16 a) -{ - return (float16_val(a) >> 10) & 0x1f; -} - -/*---------------------------------------------------------------------------- -| Returns the sign bit of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline flag extractFloat16Sign(float16 a) -{ - return float16_val(a)>>15; -} - -/*---------------------------------------------------------------------------- -| Takes a 64-bit fixed-point value `absZ' with binary point between bits 6 -| and 7, and returns the properly rounded 32-bit integer corresponding to the -| input. If `zSign' is 1, the input is negated before being converted to an -| integer. Bit 63 of `absZ' must be zero. Ordinarily, the fixed-point input -| is simply rounded to an integer, with the inexact exception raised if the -| input cannot be represented exactly as an integer. However, if the fixed- -| point input is too large, the invalid exception is raised and the largest -| positive or negative integer is returned. -*----------------------------------------------------------------------------*/ - -static int32_t roundAndPackInt32(flag zSign, uint64_t absZ, float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven; - int8_t roundIncrement, roundBits; - int32_t z; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - roundIncrement = 0x40; - break; - case float_round_to_zero: - roundIncrement = 0; - break; - case float_round_up: - roundIncrement = zSign ? 0 : 0x7f; - break; - case float_round_down: - roundIncrement = zSign ? 0x7f : 0; - break; - default: - abort(); - } - roundBits = absZ & 0x7F; - absZ = ( absZ + roundIncrement )>>7; - absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven ); - z = absZ; - if ( zSign ) z = - z; - if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) { - float_raise(float_flag_invalid, status); - return zSign ? (int32_t) 0x80000000 : 0x7FFFFFFF; - } - if (roundBits) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes the 128-bit fixed-point value formed by concatenating `absZ0' and -| `absZ1', with binary point between bits 63 and 64 (between the input words), -| and returns the properly rounded 64-bit integer corresponding to the input. -| If `zSign' is 1, the input is negated before being converted to an integer. -| Ordinarily, the fixed-point input is simply rounded to an integer, with -| the inexact exception raised if the input cannot be represented exactly as -| an integer. However, if the fixed-point input is too large, the invalid -| exception is raised and the largest positive or negative integer is -| returned. -*----------------------------------------------------------------------------*/ - -static int64_t roundAndPackInt64(flag zSign, uint64_t absZ0, uint64_t absZ1, - float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven, increment; - int64_t z; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t) absZ1 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && absZ1; - break; - case float_round_down: - increment = zSign && absZ1; - break; - default: - abort(); - } - if ( increment ) { - ++absZ0; - if ( absZ0 == 0 ) goto overflow; - absZ0 &= ~ ( ( (uint64_t) ( absZ1<<1 ) == 0 ) & roundNearestEven ); - } - z = absZ0; - if ( zSign ) z = - z; - if ( z && ( ( z < 0 ) ^ zSign ) ) { - overflow: - float_raise(float_flag_invalid, status); - return - zSign ? (int64_t) LIT64( 0x8000000000000000 ) - : LIT64( 0x7FFFFFFFFFFFFFFF ); - } - if (absZ1) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes the 128-bit fixed-point value formed by concatenating `absZ0' and -| `absZ1', with binary point between bits 63 and 64 (between the input words), -| and returns the properly rounded 64-bit unsigned integer corresponding to the -| input. Ordinarily, the fixed-point input is simply rounded to an integer, -| with the inexact exception raised if the input cannot be represented exactly -| as an integer. However, if the fixed-point input is too large, the invalid -| exception is raised and the largest unsigned integer is returned. -*----------------------------------------------------------------------------*/ - -static int64_t roundAndPackUint64(flag zSign, uint64_t absZ0, - uint64_t absZ1, float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven, increment; - - roundingMode = status->float_rounding_mode; - roundNearestEven = (roundingMode == float_round_nearest_even); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t)absZ1 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && absZ1; - break; - case float_round_down: - increment = zSign && absZ1; - break; - default: - abort(); - } - if (increment) { - ++absZ0; - if (absZ0 == 0) { - float_raise(float_flag_invalid, status); - return LIT64(0xFFFFFFFFFFFFFFFF); - } - absZ0 &= ~(((uint64_t)(absZ1<<1) == 0) & roundNearestEven); - } - - if (zSign && absZ0) { - float_raise(float_flag_invalid, status); - return 0; - } - - if (absZ1) { - status->float_exception_flags |= float_flag_inexact; - } - return absZ0; -} - -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint32_t extractFloat32Frac( float32 a ) -{ - - return float32_val(a) & 0x007FFFFF; - -} - -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline int extractFloat32Exp(float32 a) -{ - - return ( float32_val(a)>>23 ) & 0xFF; - -} - -/*---------------------------------------------------------------------------- -| Returns the sign bit of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline flag extractFloat32Sign( float32 a ) -{ - - return float32_val(a)>>31; - -} - -/*---------------------------------------------------------------------------- -| If `a' is denormal and we are in flush-to-zero mode then set the -| input-denormal exception and return zero. Otherwise just return the value. -*----------------------------------------------------------------------------*/ -float32 float32_squash_input_denormal(float32 a, float_status *status) -{ - if (status->flush_inputs_to_zero) { - if (extractFloat32Exp(a) == 0 && extractFloat32Frac(a) != 0) { - float_raise(float_flag_input_denormal, status); - return make_float32(float32_val(a) & 0x80000000); - } - } - return a; -} - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal single-precision floating-point value represented -| by the denormalized significand `aSig'. The normalized exponent and -| significand are stored at the locations pointed to by `zExpPtr' and -| `zSigPtr', respectively. -*----------------------------------------------------------------------------*/ - -static void - normalizeFloat32Subnormal(uint32_t aSig, int *zExpPtr, uint32_t *zSigPtr) -{ - int8_t shiftCount; - - shiftCount = countLeadingZeros32( aSig ) - 8; - *zSigPtr = aSig<<shiftCount; - *zExpPtr = 1 - shiftCount; - -} - -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a -| single-precision floating-point value, returning the result. After being -| shifted into the proper positions, the three fields are simply added -| together to form the result. This means that any integer portion of `zSig' -| will be added into the exponent. Since a properly normalized significand -| will have an integer portion equal to 1, the `zExp' input should be 1 less -| than the desired result exponent whenever `zSig' is a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ - -static inline float32 packFloat32(flag zSign, int zExp, uint32_t zSig) -{ - - return make_float32( - ( ( (uint32_t) zSign )<<31 ) + ( ( (uint32_t) zExp )<<23 ) + zSig); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper single-precision floating- -| point value corresponding to the abstract input. Ordinarily, the abstract -| value is simply rounded and packed into the single-precision format, with -| the inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal single- -| precision floating-point number. -| The input significand `zSig' has its binary point between bits 30 -| and 29, which is 7 bits to the left of the usual location. This shifted -| significand must be normalized or smaller. If `zSig' is not normalized, -| `zExp' must be 0; in that case, the result returned is a subnormal number, -| and it must not require rounding. In the usual case that `zSig' is -| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent. -| The handling of underflow and overflow follows the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float32 roundAndPackFloat32(flag zSign, int zExp, uint32_t zSig, - float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven; - int8_t roundIncrement, roundBits; - flag isTiny; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - roundIncrement = 0x40; - break; - case float_round_to_zero: - roundIncrement = 0; - break; - case float_round_up: - roundIncrement = zSign ? 0 : 0x7f; - break; - case float_round_down: - roundIncrement = zSign ? 0x7f : 0; - break; - default: - abort(); - break; - } - roundBits = zSig & 0x7F; - if ( 0xFD <= (uint16_t) zExp ) { - if ( ( 0xFD < zExp ) - || ( ( zExp == 0xFD ) - && ( (int32_t) ( zSig + roundIncrement ) < 0 ) ) - ) { - float_raise(float_flag_overflow | float_flag_inexact, status); - return packFloat32( zSign, 0xFF, - ( roundIncrement == 0 )); - } - if ( zExp < 0 ) { - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloat32(zSign, 0, 0); - } - isTiny = - (status->float_detect_tininess - == float_tininess_before_rounding) - || ( zExp < -1 ) - || ( zSig + roundIncrement < 0x80000000 ); - shift32RightJamming( zSig, - zExp, &zSig ); - zExp = 0; - roundBits = zSig & 0x7F; - if (isTiny && roundBits) { - float_raise(float_flag_underflow, status); - } - } - } - if (roundBits) { - status->float_exception_flags |= float_flag_inexact; - } - zSig = ( zSig + roundIncrement )>>7; - zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven ); - if ( zSig == 0 ) zExp = 0; - return packFloat32( zSign, zExp, zSig ); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper single-precision floating- -| point value corresponding to the abstract input. This routine is just like -| `roundAndPackFloat32' except that `zSig' does not have to be normalized. -| Bit 31 of `zSig' must be zero, and `zExp' must be 1 less than the ``true'' -| floating-point exponent. -*----------------------------------------------------------------------------*/ - -static float32 - normalizeRoundAndPackFloat32(flag zSign, int zExp, uint32_t zSig, - float_status *status) -{ - int8_t shiftCount; - - shiftCount = countLeadingZeros32( zSig ) - 1; - return roundAndPackFloat32(zSign, zExp - shiftCount, zSig<<shiftCount, - status); - -} - -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint64_t extractFloat64Frac( float64 a ) -{ - - return float64_val(a) & LIT64( 0x000FFFFFFFFFFFFF ); - -} - -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline int extractFloat64Exp(float64 a) -{ - - return ( float64_val(a)>>52 ) & 0x7FF; - -} - -/*---------------------------------------------------------------------------- -| Returns the sign bit of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline flag extractFloat64Sign( float64 a ) -{ - - return float64_val(a)>>63; - -} - -/*---------------------------------------------------------------------------- -| If `a' is denormal and we are in flush-to-zero mode then set the -| input-denormal exception and return zero. Otherwise just return the value. -*----------------------------------------------------------------------------*/ -float64 float64_squash_input_denormal(float64 a, float_status *status) -{ - if (status->flush_inputs_to_zero) { - if (extractFloat64Exp(a) == 0 && extractFloat64Frac(a) != 0) { - float_raise(float_flag_input_denormal, status); - return make_float64(float64_val(a) & (1ULL << 63)); - } - } - return a; -} - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal double-precision floating-point value represented -| by the denormalized significand `aSig'. The normalized exponent and -| significand are stored at the locations pointed to by `zExpPtr' and -| `zSigPtr', respectively. -*----------------------------------------------------------------------------*/ - -static void - normalizeFloat64Subnormal(uint64_t aSig, int *zExpPtr, uint64_t *zSigPtr) -{ - int8_t shiftCount; - - shiftCount = countLeadingZeros64( aSig ) - 11; - *zSigPtr = aSig<<shiftCount; - *zExpPtr = 1 - shiftCount; - -} - -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a -| double-precision floating-point value, returning the result. After being -| shifted into the proper positions, the three fields are simply added -| together to form the result. This means that any integer portion of `zSig' -| will be added into the exponent. Since a properly normalized significand -| will have an integer portion equal to 1, the `zExp' input should be 1 less -| than the desired result exponent whenever `zSig' is a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ - -static inline float64 packFloat64(flag zSign, int zExp, uint64_t zSig) -{ - - return make_float64( - ( ( (uint64_t) zSign )<<63 ) + ( ( (uint64_t) zExp )<<52 ) + zSig); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper double-precision floating- -| point value corresponding to the abstract input. Ordinarily, the abstract -| value is simply rounded and packed into the double-precision format, with -| the inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal double- -| precision floating-point number. -| The input significand `zSig' has its binary point between bits 62 -| and 61, which is 10 bits to the left of the usual location. This shifted -| significand must be normalized or smaller. If `zSig' is not normalized, -| `zExp' must be 0; in that case, the result returned is a subnormal number, -| and it must not require rounding. In the usual case that `zSig' is -| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent. -| The handling of underflow and overflow follows the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float64 roundAndPackFloat64(flag zSign, int zExp, uint64_t zSig, - float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven; - int roundIncrement, roundBits; - flag isTiny; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - roundIncrement = 0x200; - break; - case float_round_to_zero: - roundIncrement = 0; - break; - case float_round_up: - roundIncrement = zSign ? 0 : 0x3ff; - break; - case float_round_down: - roundIncrement = zSign ? 0x3ff : 0; - break; - default: - abort(); - } - roundBits = zSig & 0x3FF; - if ( 0x7FD <= (uint16_t) zExp ) { - if ( ( 0x7FD < zExp ) - || ( ( zExp == 0x7FD ) - && ( (int64_t) ( zSig + roundIncrement ) < 0 ) ) - ) { - float_raise(float_flag_overflow | float_flag_inexact, status); - return packFloat64( zSign, 0x7FF, - ( roundIncrement == 0 )); - } - if ( zExp < 0 ) { - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloat64(zSign, 0, 0); - } - isTiny = - (status->float_detect_tininess - == float_tininess_before_rounding) - || ( zExp < -1 ) - || ( zSig + roundIncrement < LIT64( 0x8000000000000000 ) ); - shift64RightJamming( zSig, - zExp, &zSig ); - zExp = 0; - roundBits = zSig & 0x3FF; - if (isTiny && roundBits) { - float_raise(float_flag_underflow, status); - } - } - } - if (roundBits) { - status->float_exception_flags |= float_flag_inexact; - } - zSig = ( zSig + roundIncrement )>>10; - zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven ); - if ( zSig == 0 ) zExp = 0; - return packFloat64( zSign, zExp, zSig ); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper double-precision floating- -| point value corresponding to the abstract input. This routine is just like -| `roundAndPackFloat64' except that `zSig' does not have to be normalized. -| Bit 63 of `zSig' must be zero, and `zExp' must be 1 less than the ``true'' -| floating-point exponent. -*----------------------------------------------------------------------------*/ - -static float64 - normalizeRoundAndPackFloat64(flag zSign, int zExp, uint64_t zSig, - float_status *status) -{ - int8_t shiftCount; - - shiftCount = countLeadingZeros64( zSig ) - 1; - return roundAndPackFloat64(zSign, zExp - shiftCount, zSig<<shiftCount, - status); - -} - -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the extended double-precision floating-point -| value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint64_t extractFloatx80Frac( floatx80 a ) -{ - - return a.low; - -} - -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the extended double-precision floating-point -| value `a'. -*----------------------------------------------------------------------------*/ - -static inline int32_t extractFloatx80Exp( floatx80 a ) -{ - - return a.high & 0x7FFF; - -} - -/*---------------------------------------------------------------------------- -| Returns the sign bit of the extended double-precision floating-point value -| `a'. -*----------------------------------------------------------------------------*/ - -static inline flag extractFloatx80Sign( floatx80 a ) -{ - - return a.high>>15; - -} - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal extended double-precision floating-point value -| represented by the denormalized significand `aSig'. The normalized exponent -| and significand are stored at the locations pointed to by `zExpPtr' and -| `zSigPtr', respectively. -*----------------------------------------------------------------------------*/ - -static void - normalizeFloatx80Subnormal( uint64_t aSig, int32_t *zExpPtr, uint64_t *zSigPtr ) -{ - int8_t shiftCount; - - shiftCount = countLeadingZeros64( aSig ); - *zSigPtr = aSig<<shiftCount; - *zExpPtr = 1 - shiftCount; - -} - -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into an -| extended double-precision floating-point value, returning the result. -*----------------------------------------------------------------------------*/ - -static inline floatx80 packFloatx80( flag zSign, int32_t zExp, uint64_t zSig ) -{ - floatx80 z; - - z.low = zSig; - z.high = ( ( (uint16_t) zSign )<<15 ) + zExp; - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and extended significand formed by the concatenation of `zSig0' and `zSig1', -| and returns the proper extended double-precision floating-point value -| corresponding to the abstract input. Ordinarily, the abstract value is -| rounded and packed into the extended double-precision format, with the -| inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal extended -| double-precision floating-point number. -| If `roundingPrecision' is 32 or 64, the result is rounded to the same -| number of bits as single or double precision, respectively. Otherwise, the -| result is rounded to the full precision of the extended double-precision -| format. -| The input significand must be normalized or smaller. If the input -| significand is not normalized, `zExp' must be 0; in that case, the result -| returned is a subnormal number, and it must not require rounding. The -| handling of underflow and overflow follows the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static floatx80 roundAndPackFloatx80(int8_t roundingPrecision, flag zSign, - int32_t zExp, uint64_t zSig0, uint64_t zSig1, - float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven, increment, isTiny; - int64_t roundIncrement, roundMask, roundBits; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - if ( roundingPrecision == 80 ) goto precision80; - if ( roundingPrecision == 64 ) { - roundIncrement = LIT64( 0x0000000000000400 ); - roundMask = LIT64( 0x00000000000007FF ); - } - else if ( roundingPrecision == 32 ) { - roundIncrement = LIT64( 0x0000008000000000 ); - roundMask = LIT64( 0x000000FFFFFFFFFF ); - } - else { - goto precision80; - } - zSig0 |= ( zSig1 != 0 ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - break; - case float_round_to_zero: - roundIncrement = 0; - break; - case float_round_up: - roundIncrement = zSign ? 0 : roundMask; - break; - case float_round_down: - roundIncrement = zSign ? roundMask : 0; - break; - default: - abort(); - } - roundBits = zSig0 & roundMask; - if ( 0x7FFD <= (uint32_t) ( zExp - 1 ) ) { - if ( ( 0x7FFE < zExp ) - || ( ( zExp == 0x7FFE ) && ( zSig0 + roundIncrement < zSig0 ) ) - ) { - goto overflow; - } - if ( zExp <= 0 ) { - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloatx80(zSign, 0, 0); - } - isTiny = - (status->float_detect_tininess - == float_tininess_before_rounding) - || ( zExp < 0 ) - || ( zSig0 <= zSig0 + roundIncrement ); - shift64RightJamming( zSig0, 1 - zExp, &zSig0 ); - zExp = 0; - roundBits = zSig0 & roundMask; - if (isTiny && roundBits) { - float_raise(float_flag_underflow, status); - } - if (roundBits) { - status->float_exception_flags |= float_flag_inexact; - } - zSig0 += roundIncrement; - if ( (int64_t) zSig0 < 0 ) zExp = 1; - roundIncrement = roundMask + 1; - if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) { - roundMask |= roundIncrement; - } - zSig0 &= ~ roundMask; - return packFloatx80( zSign, zExp, zSig0 ); - } - } - if (roundBits) { - status->float_exception_flags |= float_flag_inexact; - } - zSig0 += roundIncrement; - if ( zSig0 < roundIncrement ) { - ++zExp; - zSig0 = LIT64( 0x8000000000000000 ); - } - roundIncrement = roundMask + 1; - if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) { - roundMask |= roundIncrement; - } - zSig0 &= ~ roundMask; - if ( zSig0 == 0 ) zExp = 0; - return packFloatx80( zSign, zExp, zSig0 ); - precision80: - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t)zSig1 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && zSig1; - break; - case float_round_down: - increment = zSign && zSig1; - break; - default: - abort(); - } - if ( 0x7FFD <= (uint32_t) ( zExp - 1 ) ) { - if ( ( 0x7FFE < zExp ) - || ( ( zExp == 0x7FFE ) - && ( zSig0 == LIT64( 0xFFFFFFFFFFFFFFFF ) ) - && increment - ) - ) { - roundMask = 0; - overflow: - float_raise(float_flag_overflow | float_flag_inexact, status); - if ( ( roundingMode == float_round_to_zero ) - || ( zSign && ( roundingMode == float_round_up ) ) - || ( ! zSign && ( roundingMode == float_round_down ) ) - ) { - return packFloatx80( zSign, 0x7FFE, ~ roundMask ); - } - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( zExp <= 0 ) { - isTiny = - (status->float_detect_tininess - == float_tininess_before_rounding) - || ( zExp < 0 ) - || ! increment - || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) ); - shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 ); - zExp = 0; - if (isTiny && zSig1) { - float_raise(float_flag_underflow, status); - } - if (zSig1) { - status->float_exception_flags |= float_flag_inexact; - } - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t)zSig1 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && zSig1; - break; - case float_round_down: - increment = zSign && zSig1; - break; - default: - abort(); - } - if ( increment ) { - ++zSig0; - zSig0 &= - ~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven ); - if ( (int64_t) zSig0 < 0 ) zExp = 1; - } - return packFloatx80( zSign, zExp, zSig0 ); - } - } - if (zSig1) { - status->float_exception_flags |= float_flag_inexact; - } - if ( increment ) { - ++zSig0; - if ( zSig0 == 0 ) { - ++zExp; - zSig0 = LIT64( 0x8000000000000000 ); - } - else { - zSig0 &= ~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven ); - } - } - else { - if ( zSig0 == 0 ) zExp = 0; - } - return packFloatx80( zSign, zExp, zSig0 ); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent -| `zExp', and significand formed by the concatenation of `zSig0' and `zSig1', -| and returns the proper extended double-precision floating-point value -| corresponding to the abstract input. This routine is just like -| `roundAndPackFloatx80' except that the input significand does not have to be -| normalized. -*----------------------------------------------------------------------------*/ - -static floatx80 normalizeRoundAndPackFloatx80(int8_t roundingPrecision, - flag zSign, int32_t zExp, - uint64_t zSig0, uint64_t zSig1, - float_status *status) -{ - int8_t shiftCount; - - if ( zSig0 == 0 ) { - zSig0 = zSig1; - zSig1 = 0; - zExp -= 64; - } - shiftCount = countLeadingZeros64( zSig0 ); - shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 ); - zExp -= shiftCount; - return roundAndPackFloatx80(roundingPrecision, zSign, zExp, - zSig0, zSig1, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the least-significant 64 fraction bits of the quadruple-precision -| floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint64_t extractFloat128Frac1( float128 a ) -{ - - return a.low; - -} - -/*---------------------------------------------------------------------------- -| Returns the most-significant 48 fraction bits of the quadruple-precision -| floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline uint64_t extractFloat128Frac0( float128 a ) -{ - - return a.high & LIT64( 0x0000FFFFFFFFFFFF ); - -} - -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the quadruple-precision floating-point value -| `a'. -*----------------------------------------------------------------------------*/ - -static inline int32_t extractFloat128Exp( float128 a ) -{ - - return ( a.high>>48 ) & 0x7FFF; - -} - -/*---------------------------------------------------------------------------- -| Returns the sign bit of the quadruple-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ - -static inline flag extractFloat128Sign( float128 a ) -{ - - return a.high>>63; - -} - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal quadruple-precision floating-point value -| represented by the denormalized significand formed by the concatenation of -| `aSig0' and `aSig1'. The normalized exponent is stored at the location -| pointed to by `zExpPtr'. The most significant 49 bits of the normalized -| significand are stored at the location pointed to by `zSig0Ptr', and the -| least significant 64 bits of the normalized significand are stored at the -| location pointed to by `zSig1Ptr'. -*----------------------------------------------------------------------------*/ - -static void - normalizeFloat128Subnormal( - uint64_t aSig0, - uint64_t aSig1, - int32_t *zExpPtr, - uint64_t *zSig0Ptr, - uint64_t *zSig1Ptr - ) -{ - int8_t shiftCount; - - if ( aSig0 == 0 ) { - shiftCount = countLeadingZeros64( aSig1 ) - 15; - if ( shiftCount < 0 ) { - *zSig0Ptr = aSig1>>( - shiftCount ); - *zSig1Ptr = aSig1<<( shiftCount & 63 ); - } - else { - *zSig0Ptr = aSig1<<shiftCount; - *zSig1Ptr = 0; - } - *zExpPtr = - shiftCount - 63; - } - else { - shiftCount = countLeadingZeros64( aSig0 ) - 15; - shortShift128Left( aSig0, aSig1, shiftCount, zSig0Ptr, zSig1Ptr ); - *zExpPtr = 1 - shiftCount; - } - -} - -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', the exponent `zExp', and the significand formed -| by the concatenation of `zSig0' and `zSig1' into a quadruple-precision -| floating-point value, returning the result. After being shifted into the -| proper positions, the three fields `zSign', `zExp', and `zSig0' are simply -| added together to form the most significant 32 bits of the result. This -| means that any integer portion of `zSig0' will be added into the exponent. -| Since a properly normalized significand will have an integer portion equal -| to 1, the `zExp' input should be 1 less than the desired result exponent -| whenever `zSig0' and `zSig1' concatenated form a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ - -static inline float128 - packFloat128( flag zSign, int32_t zExp, uint64_t zSig0, uint64_t zSig1 ) -{ - float128 z; - - z.low = zSig1; - z.high = ( ( (uint64_t) zSign )<<63 ) + ( ( (uint64_t) zExp )<<48 ) + zSig0; - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and extended significand formed by the concatenation of `zSig0', `zSig1', -| and `zSig2', and returns the proper quadruple-precision floating-point value -| corresponding to the abstract input. Ordinarily, the abstract value is -| simply rounded and packed into the quadruple-precision format, with the -| inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal quadruple- -| precision floating-point number. -| The input significand must be normalized or smaller. If the input -| significand is not normalized, `zExp' must be 0; in that case, the result -| returned is a subnormal number, and it must not require rounding. In the -| usual case that the input significand is normalized, `zExp' must be 1 less -| than the ``true'' floating-point exponent. The handling of underflow and -| overflow follows the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float128 roundAndPackFloat128(flag zSign, int32_t zExp, - uint64_t zSig0, uint64_t zSig1, - uint64_t zSig2, float_status *status) -{ - int8_t roundingMode; - flag roundNearestEven, increment, isTiny; - - roundingMode = status->float_rounding_mode; - roundNearestEven = ( roundingMode == float_round_nearest_even ); - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t)zSig2 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && zSig2; - break; - case float_round_down: - increment = zSign && zSig2; - break; - default: - abort(); - } - if ( 0x7FFD <= (uint32_t) zExp ) { - if ( ( 0x7FFD < zExp ) - || ( ( zExp == 0x7FFD ) - && eq128( - LIT64( 0x0001FFFFFFFFFFFF ), - LIT64( 0xFFFFFFFFFFFFFFFF ), - zSig0, - zSig1 - ) - && increment - ) - ) { - float_raise(float_flag_overflow | float_flag_inexact, status); - if ( ( roundingMode == float_round_to_zero ) - || ( zSign && ( roundingMode == float_round_up ) ) - || ( ! zSign && ( roundingMode == float_round_down ) ) - ) { - return - packFloat128( - zSign, - 0x7FFE, - LIT64( 0x0000FFFFFFFFFFFF ), - LIT64( 0xFFFFFFFFFFFFFFFF ) - ); - } - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - if ( zExp < 0 ) { - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloat128(zSign, 0, 0, 0); - } - isTiny = - (status->float_detect_tininess - == float_tininess_before_rounding) - || ( zExp < -1 ) - || ! increment - || lt128( - zSig0, - zSig1, - LIT64( 0x0001FFFFFFFFFFFF ), - LIT64( 0xFFFFFFFFFFFFFFFF ) - ); - shift128ExtraRightJamming( - zSig0, zSig1, zSig2, - zExp, &zSig0, &zSig1, &zSig2 ); - zExp = 0; - if (isTiny && zSig2) { - float_raise(float_flag_underflow, status); - } - switch (roundingMode) { - case float_round_nearest_even: - case float_round_ties_away: - increment = ((int64_t)zSig2 < 0); - break; - case float_round_to_zero: - increment = 0; - break; - case float_round_up: - increment = !zSign && zSig2; - break; - case float_round_down: - increment = zSign && zSig2; - break; - default: - abort(); - } - } - } - if (zSig2) { - status->float_exception_flags |= float_flag_inexact; - } - if ( increment ) { - add128( zSig0, zSig1, 0, 1, &zSig0, &zSig1 ); - zSig1 &= ~ ( ( zSig2 + zSig2 == 0 ) & roundNearestEven ); - } - else { - if ( ( zSig0 | zSig1 ) == 0 ) zExp = 0; - } - return packFloat128( zSign, zExp, zSig0, zSig1 ); - -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand formed by the concatenation of `zSig0' and `zSig1', and -| returns the proper quadruple-precision floating-point value corresponding -| to the abstract input. This routine is just like `roundAndPackFloat128' -| except that the input significand has fewer bits and does not have to be -| normalized. In all cases, `zExp' must be 1 less than the ``true'' floating- -| point exponent. -*----------------------------------------------------------------------------*/ - -static float128 normalizeRoundAndPackFloat128(flag zSign, int32_t zExp, - uint64_t zSig0, uint64_t zSig1, - float_status *status) -{ - int8_t shiftCount; - uint64_t zSig2; - - if ( zSig0 == 0 ) { - zSig0 = zSig1; - zSig1 = 0; - zExp -= 64; - } - shiftCount = countLeadingZeros64( zSig0 ) - 15; - if ( 0 <= shiftCount ) { - zSig2 = 0; - shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 ); - } - else { - shift128ExtraRightJamming( - zSig0, zSig1, 0, - shiftCount, &zSig0, &zSig1, &zSig2 ); - } - zExp -= shiftCount; - return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 32-bit two's complement integer `a' -| to the single-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 int32_to_float32(int32_t a, float_status *status) -{ - flag zSign; - - if ( a == 0 ) return float32_zero; - if ( a == (int32_t) 0x80000000 ) return packFloat32( 1, 0x9E, 0 ); - zSign = ( a < 0 ); - return normalizeRoundAndPackFloat32(zSign, 0x9C, zSign ? -a : a, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 32-bit two's complement integer `a' -| to the double-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 int32_to_float64(int32_t a, float_status *status) -{ - flag zSign; - uint32_t absA; - int8_t shiftCount; - uint64_t zSig; - - if ( a == 0 ) return float64_zero; - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros32( absA ) + 21; - zSig = absA; - return packFloat64( zSign, 0x432 - shiftCount, zSig<<shiftCount ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 32-bit two's complement integer `a' -| to the extended double-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 int32_to_floatx80(int32_t a, float_status *status) -{ - flag zSign; - uint32_t absA; - int8_t shiftCount; - uint64_t zSig; - - if ( a == 0 ) return packFloatx80( 0, 0, 0 ); - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros32( absA ) + 32; - zSig = absA; - return packFloatx80( zSign, 0x403E - shiftCount, zSig<<shiftCount ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 32-bit two's complement integer `a' to -| the quadruple-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 int32_to_float128(int32_t a, float_status *status) -{ - flag zSign; - uint32_t absA; - int8_t shiftCount; - uint64_t zSig0; - - if ( a == 0 ) return packFloat128( 0, 0, 0, 0 ); - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros32( absA ) + 17; - zSig0 = absA; - return packFloat128( zSign, 0x402E - shiftCount, zSig0<<shiftCount, 0 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit two's complement integer `a' -| to the single-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 int64_to_float32(int64_t a, float_status *status) -{ - flag zSign; - uint64_t absA; - int8_t shiftCount; - - if ( a == 0 ) return float32_zero; - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros64( absA ) - 40; - if ( 0 <= shiftCount ) { - return packFloat32( zSign, 0x95 - shiftCount, absA<<shiftCount ); - } - else { - shiftCount += 7; - if ( shiftCount < 0 ) { - shift64RightJamming( absA, - shiftCount, &absA ); - } - else { - absA <<= shiftCount; - } - return roundAndPackFloat32(zSign, 0x9C - shiftCount, absA, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit two's complement integer `a' -| to the double-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 int64_to_float64(int64_t a, float_status *status) -{ - flag zSign; - - if ( a == 0 ) return float64_zero; - if ( a == (int64_t) LIT64( 0x8000000000000000 ) ) { - return packFloat64( 1, 0x43E, 0 ); - } - zSign = ( a < 0 ); - return normalizeRoundAndPackFloat64(zSign, 0x43C, zSign ? -a : a, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit two's complement integer `a' -| to the extended double-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 int64_to_floatx80(int64_t a, float_status *status) -{ - flag zSign; - uint64_t absA; - int8_t shiftCount; - - if ( a == 0 ) return packFloatx80( 0, 0, 0 ); - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros64( absA ); - return packFloatx80( zSign, 0x403E - shiftCount, absA<<shiftCount ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit two's complement integer `a' to -| the quadruple-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 int64_to_float128(int64_t a, float_status *status) -{ - flag zSign; - uint64_t absA; - int8_t shiftCount; - int32_t zExp; - uint64_t zSig0, zSig1; - - if ( a == 0 ) return packFloat128( 0, 0, 0, 0 ); - zSign = ( a < 0 ); - absA = zSign ? - a : a; - shiftCount = countLeadingZeros64( absA ) + 49; - zExp = 0x406E - shiftCount; - if ( 64 <= shiftCount ) { - zSig1 = 0; - zSig0 = absA; - shiftCount -= 64; - } - else { - zSig1 = absA; - zSig0 = 0; - } - shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 ); - return packFloat128( zSign, zExp, zSig0, zSig1 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit unsigned integer `a' -| to the single-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 uint64_to_float32(uint64_t a, float_status *status) -{ - int shiftcount; - - if (a == 0) { - return float32_zero; - } - - /* Determine (left) shift needed to put first set bit into bit posn 23 - * (since packFloat32() expects the binary point between bits 23 and 22); - * this is the fast case for smallish numbers. - */ - shiftcount = countLeadingZeros64(a) - 40; - if (shiftcount >= 0) { - return packFloat32(0, 0x95 - shiftcount, a << shiftcount); - } - /* Otherwise we need to do a round-and-pack. roundAndPackFloat32() - * expects the binary point between bits 30 and 29, hence the + 7. - */ - shiftcount += 7; - if (shiftcount < 0) { - shift64RightJamming(a, -shiftcount, &a); - } else { - a <<= shiftcount; - } - - return roundAndPackFloat32(0, 0x9c - shiftcount, a, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit unsigned integer `a' -| to the double-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 uint64_to_float64(uint64_t a, float_status *status) -{ - int exp = 0x43C; - int shiftcount; - - if (a == 0) { - return float64_zero; - } - - shiftcount = countLeadingZeros64(a) - 1; - if (shiftcount < 0) { - shift64RightJamming(a, -shiftcount, &a); - } else { - a <<= shiftcount; - } - return roundAndPackFloat64(0, exp - shiftcount, a, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the 64-bit unsigned integer `a' -| to the quadruple-precision floating-point format. The conversion is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 uint64_to_float128(uint64_t a, float_status *status) -{ - if (a == 0) { - return float128_zero; - } - return normalizeRoundAndPackFloat128(0, 0x406E, a, 0, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 32-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int32_t float32_to_int32(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - uint64_t aSig64; - - a = float32_squash_input_denormal(a, status); - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( ( aExp == 0xFF ) && aSig ) aSign = 0; - if ( aExp ) aSig |= 0x00800000; - shiftCount = 0xAF - aExp; - aSig64 = aSig; - aSig64 <<= 32; - if ( 0 < shiftCount ) shift64RightJamming( aSig64, shiftCount, &aSig64 ); - return roundAndPackInt32(aSign, aSig64, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 32-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int32_t float32_to_int32_round_to_zero(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - int32_t z; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - shiftCount = aExp - 0x9E; - if ( 0 <= shiftCount ) { - if ( float32_val(a) != 0xCF000000 ) { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) return 0x7FFFFFFF; - } - return (int32_t) 0x80000000; - } - else if ( aExp <= 0x7E ) { - if (aExp | aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - aSig = ( aSig | 0x00800000 )<<8; - z = aSig>>( - shiftCount ); - if ( (uint32_t) ( aSig<<( shiftCount & 31 ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - if ( aSign ) z = - z; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 16-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int16_t float32_to_int16_round_to_zero(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - int32_t z; - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - shiftCount = aExp - 0x8E; - if ( 0 <= shiftCount ) { - if ( float32_val(a) != 0xC7000000 ) { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) { - return 0x7FFF; - } - } - return (int32_t) 0xffff8000; - } - else if ( aExp <= 0x7E ) { - if ( aExp | aSig ) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - shiftCount -= 0x10; - aSig = ( aSig | 0x00800000 )<<8; - z = aSig>>( - shiftCount ); - if ( (uint32_t) ( aSig<<( shiftCount & 31 ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - if ( aSign ) { - z = - z; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 64-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int64_t float32_to_int64(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - uint64_t aSig64, aSigExtra; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - shiftCount = 0xBE - aExp; - if ( shiftCount < 0 ) { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - if ( aExp ) aSig |= 0x00800000; - aSig64 = aSig; - aSig64 <<= 40; - shift64ExtraRightJamming( aSig64, 0, shiftCount, &aSig64, &aSigExtra ); - return roundAndPackInt64(aSign, aSig64, aSigExtra, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 64-bit unsigned integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| unsigned integer is returned. Otherwise, if the conversion overflows, the -| largest unsigned integer is returned. If the 'a' is negative, the result -| is rounded and zero is returned; values that do not round to zero will -| raise the inexact exception flag. -*----------------------------------------------------------------------------*/ - -uint64_t float32_to_uint64(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - uint64_t aSig64, aSigExtra; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac(a); - aExp = extractFloat32Exp(a); - aSign = extractFloat32Sign(a); - if ((aSign) && (aExp > 126)) { - float_raise(float_flag_invalid, status); - if (float32_is_any_nan(a)) { - return LIT64(0xFFFFFFFFFFFFFFFF); - } else { - return 0; - } - } - shiftCount = 0xBE - aExp; - if (aExp) { - aSig |= 0x00800000; - } - if (shiftCount < 0) { - float_raise(float_flag_invalid, status); - return LIT64(0xFFFFFFFFFFFFFFFF); - } - - aSig64 = aSig; - aSig64 <<= 40; - shift64ExtraRightJamming(aSig64, 0, shiftCount, &aSig64, &aSigExtra); - return roundAndPackUint64(aSign, aSig64, aSigExtra, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 64-bit unsigned integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. If -| `a' is a NaN, the largest unsigned integer is returned. Otherwise, if the -| conversion overflows, the largest unsigned integer is returned. If the -| 'a' is negative, the result is rounded and zero is returned; values that do -| not round to zero will raise the inexact flag. -*----------------------------------------------------------------------------*/ - -uint64_t float32_to_uint64_round_to_zero(float32 a, float_status *status) -{ - signed char current_rounding_mode = status->float_rounding_mode; - set_float_rounding_mode(float_round_to_zero, status); - int64_t v = float32_to_uint64(a, status); - set_float_rounding_mode(current_rounding_mode, status); - return v; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the 64-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. If -| `a' is a NaN, the largest positive integer is returned. Otherwise, if the -| conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int64_t float32_to_int64_round_to_zero(float32 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint32_t aSig; - uint64_t aSig64; - int64_t z; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - shiftCount = aExp - 0xBE; - if ( 0 <= shiftCount ) { - if ( float32_val(a) != 0xDF000000 ) { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - else if ( aExp <= 0x7E ) { - if (aExp | aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - aSig64 = aSig | 0x00800000; - aSig64 <<= 40; - z = aSig64>>( - shiftCount ); - if ( (uint64_t) ( aSig64<<( shiftCount & 63 ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - if ( aSign ) z = - z; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the double-precision floating-point format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float32_to_float64(float32 a, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( aExp == 0xFF ) { - if (aSig) { - return commonNaNToFloat64(float32ToCommonNaN(a, status), status); - } - return packFloat64( aSign, 0x7FF, 0 ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat64( aSign, 0, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - --aExp; - } - return packFloat64( aSign, aExp + 0x380, ( (uint64_t) aSig )<<29 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the extended double-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 float32_to_floatx80(float32 a, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - - a = float32_squash_input_denormal(a, status); - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( aExp == 0xFF ) { - if (aSig) { - return commonNaNToFloatx80(float32ToCommonNaN(a, status), status); - } - return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - aSig |= 0x00800000; - return packFloatx80( aSign, aExp + 0x3F80, ( (uint64_t) aSig )<<40 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point value -| `a' to the double-precision floating-point format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float32_to_float128(float32 a, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - - a = float32_squash_input_denormal(a, status); - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( aExp == 0xFF ) { - if (aSig) { - return commonNaNToFloat128(float32ToCommonNaN(a, status), status); - } - return packFloat128( aSign, 0x7FFF, 0, 0 ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat128( aSign, 0, 0, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - --aExp; - } - return packFloat128( aSign, aExp + 0x3F80, ( (uint64_t) aSig )<<25, 0 ); - -} - -/*---------------------------------------------------------------------------- -| Rounds the single-precision floating-point value `a' to an integer, and -| returns the result as a single-precision floating-point value. The -| operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_round_to_int(float32 a, float_status *status) -{ - flag aSign; - int aExp; - uint32_t lastBitMask, roundBitsMask; - uint32_t z; - a = float32_squash_input_denormal(a, status); - - aExp = extractFloat32Exp( a ); - if ( 0x96 <= aExp ) { - if ( ( aExp == 0xFF ) && extractFloat32Frac( a ) ) { - return propagateFloat32NaN(a, a, status); - } - return a; - } - if ( aExp <= 0x7E ) { - if ( (uint32_t) ( float32_val(a)<<1 ) == 0 ) return a; - status->float_exception_flags |= float_flag_inexact; - aSign = extractFloat32Sign( a ); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) { - return packFloat32( aSign, 0x7F, 0 ); - } - break; - case float_round_ties_away: - if (aExp == 0x7E) { - return packFloat32(aSign, 0x7F, 0); - } - break; - case float_round_down: - return make_float32(aSign ? 0xBF800000 : 0); - case float_round_up: - return make_float32(aSign ? 0x80000000 : 0x3F800000); - } - return packFloat32( aSign, 0, 0 ); - } - lastBitMask = 1; - lastBitMask <<= 0x96 - aExp; - roundBitsMask = lastBitMask - 1; - z = float32_val(a); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - z += lastBitMask>>1; - if ((z & roundBitsMask) == 0) { - z &= ~lastBitMask; - } - break; - case float_round_ties_away: - z += lastBitMask >> 1; - break; - case float_round_to_zero: - break; - case float_round_up: - if (!extractFloat32Sign(make_float32(z))) { - z += roundBitsMask; - } - break; - case float_round_down: - if (extractFloat32Sign(make_float32(z))) { - z += roundBitsMask; - } - break; - default: - abort(); - } - z &= ~ roundBitsMask; - if (z != float32_val(a)) { - status->float_exception_flags |= float_flag_inexact; - } - return make_float32(z); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the single-precision -| floating-point values `a' and `b'. If `zSign' is 1, the sum is negated -| before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float32 addFloat32Sigs(float32 a, float32 b, flag zSign, - float_status *status) -{ - int aExp, bExp, zExp; - uint32_t aSig, bSig, zSig; - int expDiff; - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - bSig = extractFloat32Frac( b ); - bExp = extractFloat32Exp( b ); - expDiff = aExp - bExp; - aSig <<= 6; - bSig <<= 6; - if ( 0 < expDiff ) { - if ( aExp == 0xFF ) { - if (aSig) { - return propagateFloat32NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig |= 0x20000000; - } - shift32RightJamming( bSig, expDiff, &bSig ); - zExp = aExp; - } - else if ( expDiff < 0 ) { - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - return packFloat32( zSign, 0xFF, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig |= 0x20000000; - } - shift32RightJamming( aSig, - expDiff, &aSig ); - zExp = bExp; - } - else { - if ( aExp == 0xFF ) { - if (aSig | bSig) { - return propagateFloat32NaN(a, b, status); - } - return a; - } - if ( aExp == 0 ) { - if (status->flush_to_zero) { - if (aSig | bSig) { - float_raise(float_flag_output_denormal, status); - } - return packFloat32(zSign, 0, 0); - } - return packFloat32( zSign, 0, ( aSig + bSig )>>6 ); - } - zSig = 0x40000000 + aSig + bSig; - zExp = aExp; - goto roundAndPack; - } - aSig |= 0x20000000; - zSig = ( aSig + bSig )<<1; - --zExp; - if ( (int32_t) zSig < 0 ) { - zSig = aSig + bSig; - ++zExp; - } - roundAndPack: - return roundAndPackFloat32(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the single- -| precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float32 subFloat32Sigs(float32 a, float32 b, flag zSign, - float_status *status) -{ - int aExp, bExp, zExp; - uint32_t aSig, bSig, zSig; - int expDiff; - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - bSig = extractFloat32Frac( b ); - bExp = extractFloat32Exp( b ); - expDiff = aExp - bExp; - aSig <<= 7; - bSig <<= 7; - if ( 0 < expDiff ) goto aExpBigger; - if ( expDiff < 0 ) goto bExpBigger; - if ( aExp == 0xFF ) { - if (aSig | bSig) { - return propagateFloat32NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - if ( aExp == 0 ) { - aExp = 1; - bExp = 1; - } - if ( bSig < aSig ) goto aBigger; - if ( aSig < bSig ) goto bBigger; - return packFloat32(status->float_rounding_mode == float_round_down, 0, 0); - bExpBigger: - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - return packFloat32( zSign ^ 1, 0xFF, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig |= 0x40000000; - } - shift32RightJamming( aSig, - expDiff, &aSig ); - bSig |= 0x40000000; - bBigger: - zSig = bSig - aSig; - zExp = bExp; - zSign ^= 1; - goto normalizeRoundAndPack; - aExpBigger: - if ( aExp == 0xFF ) { - if (aSig) { - return propagateFloat32NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig |= 0x40000000; - } - shift32RightJamming( bSig, expDiff, &bSig ); - aSig |= 0x40000000; - aBigger: - zSig = aSig - bSig; - zExp = aExp; - normalizeRoundAndPack: - --zExp; - return normalizeRoundAndPackFloat32(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the single-precision floating-point values `a' -| and `b'. The operation is performed according to the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_add(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - if ( aSign == bSign ) { - return addFloat32Sigs(a, b, aSign, status); - } - else { - return subFloat32Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the single-precision floating-point values -| `a' and `b'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_sub(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - if ( aSign == bSign ) { - return subFloat32Sigs(a, b, aSign, status); - } - else { - return addFloat32Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the single-precision floating-point values -| `a' and `b'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_mul(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign, zSign; - int aExp, bExp, zExp; - uint32_t aSig, bSig; - uint64_t zSig64; - uint32_t zSig; - - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - bSig = extractFloat32Frac( b ); - bExp = extractFloat32Exp( b ); - bSign = extractFloat32Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0xFF ) { - if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) { - return propagateFloat32NaN(a, b, status); - } - if ( ( bExp | bSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - return packFloat32( zSign, 0xFF, 0 ); - } - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - if ( ( aExp | aSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - return packFloat32( zSign, 0xFF, 0 ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat32( zSign, 0, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) return packFloat32( zSign, 0, 0 ); - normalizeFloat32Subnormal( bSig, &bExp, &bSig ); - } - zExp = aExp + bExp - 0x7F; - aSig = ( aSig | 0x00800000 )<<7; - bSig = ( bSig | 0x00800000 )<<8; - shift64RightJamming( ( (uint64_t) aSig ) * bSig, 32, &zSig64 ); - zSig = zSig64; - if ( 0 <= (int32_t) ( zSig<<1 ) ) { - zSig <<= 1; - --zExp; - } - return roundAndPackFloat32(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of dividing the single-precision floating-point value `a' -| by the corresponding value `b'. The operation is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_div(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign, zSign; - int aExp, bExp, zExp; - uint32_t aSig, bSig, zSig; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - bSig = extractFloat32Frac( b ); - bExp = extractFloat32Exp( b ); - bSign = extractFloat32Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0xFF ) { - if (aSig) { - return propagateFloat32NaN(a, b, status); - } - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - return packFloat32( zSign, 0xFF, 0 ); - } - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - return packFloat32( zSign, 0, 0 ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - if ( ( aExp | aSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - float_raise(float_flag_divbyzero, status); - return packFloat32( zSign, 0xFF, 0 ); - } - normalizeFloat32Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat32( zSign, 0, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - zExp = aExp - bExp + 0x7D; - aSig = ( aSig | 0x00800000 )<<7; - bSig = ( bSig | 0x00800000 )<<8; - if ( bSig <= ( aSig + aSig ) ) { - aSig >>= 1; - ++zExp; - } - zSig = ( ( (uint64_t) aSig )<<32 ) / bSig; - if ( ( zSig & 0x3F ) == 0 ) { - zSig |= ( (uint64_t) bSig * zSig != ( (uint64_t) aSig )<<32 ); - } - return roundAndPackFloat32(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the remainder of the single-precision floating-point value `a' -| with respect to the corresponding value `b'. The operation is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_rem(float32 a, float32 b, float_status *status) -{ - flag aSign, zSign; - int aExp, bExp, expDiff; - uint32_t aSig, bSig; - uint32_t q; - uint64_t aSig64, bSig64, q64; - uint32_t alternateASig; - int32_t sigMean; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - bSig = extractFloat32Frac( b ); - bExp = extractFloat32Exp( b ); - if ( aExp == 0xFF ) { - if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) { - return propagateFloat32NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - if ( bExp == 0xFF ) { - if (bSig) { - return propagateFloat32NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - normalizeFloat32Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return a; - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - expDiff = aExp - bExp; - aSig |= 0x00800000; - bSig |= 0x00800000; - if ( expDiff < 32 ) { - aSig <<= 8; - bSig <<= 8; - if ( expDiff < 0 ) { - if ( expDiff < -1 ) return a; - aSig >>= 1; - } - q = ( bSig <= aSig ); - if ( q ) aSig -= bSig; - if ( 0 < expDiff ) { - q = ( ( (uint64_t) aSig )<<32 ) / bSig; - q >>= 32 - expDiff; - bSig >>= 2; - aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q; - } - else { - aSig >>= 2; - bSig >>= 2; - } - } - else { - if ( bSig <= aSig ) aSig -= bSig; - aSig64 = ( (uint64_t) aSig )<<40; - bSig64 = ( (uint64_t) bSig )<<40; - expDiff -= 64; - while ( 0 < expDiff ) { - q64 = estimateDiv128To64( aSig64, 0, bSig64 ); - q64 = ( 2 < q64 ) ? q64 - 2 : 0; - aSig64 = - ( ( bSig * q64 )<<38 ); - expDiff -= 62; - } - expDiff += 64; - q64 = estimateDiv128To64( aSig64, 0, bSig64 ); - q64 = ( 2 < q64 ) ? q64 - 2 : 0; - q = q64>>( 64 - expDiff ); - bSig <<= 6; - aSig = ( ( aSig64>>33 )<<( expDiff - 1 ) ) - bSig * q; - } - do { - alternateASig = aSig; - ++q; - aSig -= bSig; - } while ( 0 <= (int32_t) aSig ); - sigMean = aSig + alternateASig; - if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) { - aSig = alternateASig; - } - zSign = ( (int32_t) aSig < 0 ); - if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat32(aSign ^ zSign, bExp, aSig, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the single-precision floating-point values -| `a' and `b' then adding 'c', with no intermediate rounding step after the -| multiplication. The operation is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic 754-2008. -| The flags argument allows the caller to select negation of the -| addend, the intermediate product, or the final result. (The difference -| between this and having the caller do a separate negation is that negating -| externally will flip the sign bit on NaNs.) -*----------------------------------------------------------------------------*/ - -float32 float32_muladd(float32 a, float32 b, float32 c, int flags, - float_status *status) -{ - flag aSign, bSign, cSign, zSign; - int aExp, bExp, cExp, pExp, zExp, expDiff; - uint32_t aSig, bSig, cSig; - flag pInf, pZero, pSign; - uint64_t pSig64, cSig64, zSig64; - uint32_t pSig; - int shiftcount; - flag signflip, infzero; - - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - c = float32_squash_input_denormal(c, status); - aSig = extractFloat32Frac(a); - aExp = extractFloat32Exp(a); - aSign = extractFloat32Sign(a); - bSig = extractFloat32Frac(b); - bExp = extractFloat32Exp(b); - bSign = extractFloat32Sign(b); - cSig = extractFloat32Frac(c); - cExp = extractFloat32Exp(c); - cSign = extractFloat32Sign(c); - - infzero = ((aExp == 0 && aSig == 0 && bExp == 0xff && bSig == 0) || - (aExp == 0xff && aSig == 0 && bExp == 0 && bSig == 0)); - - /* It is implementation-defined whether the cases of (0,inf,qnan) - * and (inf,0,qnan) raise InvalidOperation or not (and what QNaN - * they return if they do), so we have to hand this information - * off to the target-specific pick-a-NaN routine. - */ - if (((aExp == 0xff) && aSig) || - ((bExp == 0xff) && bSig) || - ((cExp == 0xff) && cSig)) { - return propagateFloat32MulAddNaN(a, b, c, infzero, status); - } - - if (infzero) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - - if (flags & float_muladd_negate_c) { - cSign ^= 1; - } - - signflip = (flags & float_muladd_negate_result) ? 1 : 0; - - /* Work out the sign and type of the product */ - pSign = aSign ^ bSign; - if (flags & float_muladd_negate_product) { - pSign ^= 1; - } - pInf = (aExp == 0xff) || (bExp == 0xff); - pZero = ((aExp | aSig) == 0) || ((bExp | bSig) == 0); - - if (cExp == 0xff) { - if (pInf && (pSign ^ cSign)) { - /* addition of opposite-signed infinities => InvalidOperation */ - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - /* Otherwise generate an infinity of the same sign */ - return packFloat32(cSign ^ signflip, 0xff, 0); - } - - if (pInf) { - return packFloat32(pSign ^ signflip, 0xff, 0); - } - - if (pZero) { - if (cExp == 0) { - if (cSig == 0) { - /* Adding two exact zeroes */ - if (pSign == cSign) { - zSign = pSign; - } else if (status->float_rounding_mode == float_round_down) { - zSign = 1; - } else { - zSign = 0; - } - return packFloat32(zSign ^ signflip, 0, 0); - } - /* Exact zero plus a denorm */ - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloat32(cSign ^ signflip, 0, 0); - } - } - /* Zero plus something non-zero : just return the something */ - if (flags & float_muladd_halve_result) { - if (cExp == 0) { - normalizeFloat32Subnormal(cSig, &cExp, &cSig); - } - /* Subtract one to halve, and one again because roundAndPackFloat32 - * wants one less than the true exponent. - */ - cExp -= 2; - cSig = (cSig | 0x00800000) << 7; - return roundAndPackFloat32(cSign ^ signflip, cExp, cSig, status); - } - return packFloat32(cSign ^ signflip, cExp, cSig); - } - - if (aExp == 0) { - normalizeFloat32Subnormal(aSig, &aExp, &aSig); - } - if (bExp == 0) { - normalizeFloat32Subnormal(bSig, &bExp, &bSig); - } - - /* Calculate the actual result a * b + c */ - - /* Multiply first; this is easy. */ - /* NB: we subtract 0x7e where float32_mul() subtracts 0x7f - * because we want the true exponent, not the "one-less-than" - * flavour that roundAndPackFloat32() takes. - */ - pExp = aExp + bExp - 0x7e; - aSig = (aSig | 0x00800000) << 7; - bSig = (bSig | 0x00800000) << 8; - pSig64 = (uint64_t)aSig * bSig; - if ((int64_t)(pSig64 << 1) >= 0) { - pSig64 <<= 1; - pExp--; - } - - zSign = pSign ^ signflip; - - /* Now pSig64 is the significand of the multiply, with the explicit bit in - * position 62. - */ - if (cExp == 0) { - if (!cSig) { - /* Throw out the special case of c being an exact zero now */ - shift64RightJamming(pSig64, 32, &pSig64); - pSig = pSig64; - if (flags & float_muladd_halve_result) { - pExp--; - } - return roundAndPackFloat32(zSign, pExp - 1, - pSig, status); - } - normalizeFloat32Subnormal(cSig, &cExp, &cSig); - } - - cSig64 = (uint64_t)cSig << (62 - 23); - cSig64 |= LIT64(0x4000000000000000); - expDiff = pExp - cExp; - - if (pSign == cSign) { - /* Addition */ - if (expDiff > 0) { - /* scale c to match p */ - shift64RightJamming(cSig64, expDiff, &cSig64); - zExp = pExp; - } else if (expDiff < 0) { - /* scale p to match c */ - shift64RightJamming(pSig64, -expDiff, &pSig64); - zExp = cExp; - } else { - /* no scaling needed */ - zExp = cExp; - } - /* Add significands and make sure explicit bit ends up in posn 62 */ - zSig64 = pSig64 + cSig64; - if ((int64_t)zSig64 < 0) { - shift64RightJamming(zSig64, 1, &zSig64); - } else { - zExp--; - } - } else { - /* Subtraction */ - if (expDiff > 0) { - shift64RightJamming(cSig64, expDiff, &cSig64); - zSig64 = pSig64 - cSig64; - zExp = pExp; - } else if (expDiff < 0) { - shift64RightJamming(pSig64, -expDiff, &pSig64); - zSig64 = cSig64 - pSig64; - zExp = cExp; - zSign ^= 1; - } else { - zExp = pExp; - if (cSig64 < pSig64) { - zSig64 = pSig64 - cSig64; - } else if (pSig64 < cSig64) { - zSig64 = cSig64 - pSig64; - zSign ^= 1; - } else { - /* Exact zero */ - zSign = signflip; - if (status->float_rounding_mode == float_round_down) { - zSign ^= 1; - } - return packFloat32(zSign, 0, 0); - } - } - --zExp; - /* Normalize to put the explicit bit back into bit 62. */ - shiftcount = countLeadingZeros64(zSig64) - 1; - zSig64 <<= shiftcount; - zExp -= shiftcount; - } - if (flags & float_muladd_halve_result) { - zExp--; - } - - shift64RightJamming(zSig64, 32, &zSig64); - return roundAndPackFloat32(zSign, zExp, zSig64, status); -} - - -/*---------------------------------------------------------------------------- -| Returns the square root of the single-precision floating-point value `a'. -| The operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float32_sqrt(float32 a, float_status *status) -{ - flag aSign; - int aExp, zExp; - uint32_t aSig, zSig; - uint64_t rem, term; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( aExp == 0xFF ) { - if (aSig) { - return propagateFloat32NaN(a, float32_zero, status); - } - if ( ! aSign ) return a; - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - if ( aSign ) { - if ( ( aExp | aSig ) == 0 ) return a; - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return float32_zero; - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - zExp = ( ( aExp - 0x7F )>>1 ) + 0x7E; - aSig = ( aSig | 0x00800000 )<<8; - zSig = estimateSqrt32( aExp, aSig ) + 2; - if ( ( zSig & 0x7F ) <= 5 ) { - if ( zSig < 2 ) { - zSig = 0x7FFFFFFF; - goto roundAndPack; - } - aSig >>= aExp & 1; - term = ( (uint64_t) zSig ) * zSig; - rem = ( ( (uint64_t) aSig )<<32 ) - term; - while ( (int64_t) rem < 0 ) { - --zSig; - rem += ( ( (uint64_t) zSig )<<1 ) | 1; - } - zSig |= ( rem != 0 ); - } - shift32RightJamming( zSig, 1, &zSig ); - roundAndPack: - return roundAndPackFloat32(0, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the binary exponential of the single-precision floating-point value -| `a'. The operation is performed according to the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -| -| Uses the following identities: -| -| 1. ------------------------------------------------------------------------- -| x x*ln(2) -| 2 = e -| -| 2. ------------------------------------------------------------------------- -| 2 3 4 5 n -| x x x x x x x -| e = 1 + --- + --- + --- + --- + --- + ... + --- + ... -| 1! 2! 3! 4! 5! n! -*----------------------------------------------------------------------------*/ - -static const float64 float32_exp2_coefficients[15] = -{ - const_float64( 0x3ff0000000000000ll ), /* 1 */ - const_float64( 0x3fe0000000000000ll ), /* 2 */ - const_float64( 0x3fc5555555555555ll ), /* 3 */ - const_float64( 0x3fa5555555555555ll ), /* 4 */ - const_float64( 0x3f81111111111111ll ), /* 5 */ - const_float64( 0x3f56c16c16c16c17ll ), /* 6 */ - const_float64( 0x3f2a01a01a01a01all ), /* 7 */ - const_float64( 0x3efa01a01a01a01all ), /* 8 */ - const_float64( 0x3ec71de3a556c734ll ), /* 9 */ - const_float64( 0x3e927e4fb7789f5cll ), /* 10 */ - const_float64( 0x3e5ae64567f544e4ll ), /* 11 */ - const_float64( 0x3e21eed8eff8d898ll ), /* 12 */ - const_float64( 0x3de6124613a86d09ll ), /* 13 */ - const_float64( 0x3da93974a8c07c9dll ), /* 14 */ - const_float64( 0x3d6ae7f3e733b81fll ), /* 15 */ -}; - -float32 float32_exp2(float32 a, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - float64 r, x, xn; - int i; - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - - if ( aExp == 0xFF) { - if (aSig) { - return propagateFloat32NaN(a, float32_zero, status); - } - return (aSign) ? float32_zero : a; - } - if (aExp == 0) { - if (aSig == 0) return float32_one; - } - - float_raise(float_flag_inexact, status); - - /* ******************************* */ - /* using float64 for approximation */ - /* ******************************* */ - x = float32_to_float64(a, status); - x = float64_mul(x, float64_ln2, status); - - xn = x; - r = float64_one; - for (i = 0 ; i < 15 ; i++) { - float64 f; - - f = float64_mul(xn, float32_exp2_coefficients[i], status); - r = float64_add(r, f, status); - - xn = float64_mul(xn, x, status); - } - - return float64_to_float32(r, status); -} - -/*---------------------------------------------------------------------------- -| Returns the binary log of the single-precision floating-point value `a'. -| The operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float32 float32_log2(float32 a, float_status *status) -{ - flag aSign, zSign; - int aExp; - uint32_t aSig, zSig, i; - - a = float32_squash_input_denormal(a, status); - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat32( 1, 0xFF, 0 ); - normalizeFloat32Subnormal( aSig, &aExp, &aSig ); - } - if ( aSign ) { - float_raise(float_flag_invalid, status); - return float32_default_nan; - } - if ( aExp == 0xFF ) { - if (aSig) { - return propagateFloat32NaN(a, float32_zero, status); - } - return a; - } - - aExp -= 0x7F; - aSig |= 0x00800000; - zSign = aExp < 0; - zSig = aExp << 23; - - for (i = 1 << 22; i > 0; i >>= 1) { - aSig = ( (uint64_t)aSig * aSig ) >> 23; - if ( aSig & 0x01000000 ) { - aSig >>= 1; - zSig |= i; - } - } - - if ( zSign ) - zSig = -zSig; - - return normalizeRoundAndPackFloat32(zSign, 0x85, zSig, status); -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is equal to -| the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. Otherwise, the comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_eq(float32 a, float32 b, float_status *status) -{ - uint32_t av, bv; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - av = float32_val(a); - bv = float32_val(b); - return ( av == bv ) || ( (uint32_t) ( ( av | bv )<<1 ) == 0 ); -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is less than -| or equal to the corresponding value `b', and 0 otherwise. The invalid -| exception is raised if either operand is a NaN. The comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_le(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - uint32_t av, bv; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - av = float32_val(a); - bv = float32_val(b); - if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 ); - return ( av == bv ) || ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. The comparison is performed according -| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_lt(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - uint32_t av, bv; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - av = float32_val(a); - bv = float32_val(b); - if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 ); - return ( av != bv ) && ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. The invalid exception is raised if either -| operand is a NaN. The comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_unordered(float32 a, float32 b, float_status *status) -{ - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is equal to -| the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception. The comparison is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_eq_quiet(float32 a, float32 b, float_status *status) -{ - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - return ( float32_val(a) == float32_val(b) ) || - ( (uint32_t) ( ( float32_val(a) | float32_val(b) )<<1 ) == 0 ); -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is less than or -| equal to the corresponding value `b', and 0 otherwise. Quiet NaNs do not -| cause an exception. Otherwise, the comparison is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_le_quiet(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - uint32_t av, bv; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - av = float32_val(a); - bv = float32_val(b); - if ( aSign != bSign ) return aSign || ( (uint32_t) ( ( av | bv )<<1 ) == 0 ); - return ( av == bv ) || ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception. Otherwise, the comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_lt_quiet(float32 a, float32 b, float_status *status) -{ - flag aSign, bSign; - uint32_t av, bv; - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat32Sign( a ); - bSign = extractFloat32Sign( b ); - av = float32_val(a); - bv = float32_val(b); - if ( aSign != bSign ) return aSign && ( (uint32_t) ( ( av | bv )<<1 ) != 0 ); - return ( av != bv ) && ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. Quiet NaNs do not cause an exception. The -| comparison is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float32_unordered_quiet(float32 a, float32 b, float_status *status) -{ - a = float32_squash_input_denormal(a, status); - b = float32_squash_input_denormal(b, status); - - if ( ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) ) - || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) ) - ) { - if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 32-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int32_t float64_to_int32(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( ( aExp == 0x7FF ) && aSig ) aSign = 0; - if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); - shiftCount = 0x42C - aExp; - if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32(aSign, aSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 32-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int32_t float64_to_int32_round_to_zero(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig, savedASig; - int32_t z; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( 0x41E < aExp ) { - if ( ( aExp == 0x7FF ) && aSig ) aSign = 0; - goto invalid; - } - else if ( aExp < 0x3FF ) { - if (aExp || aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - aSig |= LIT64( 0x0010000000000000 ); - shiftCount = 0x433 - aExp; - savedASig = aSig; - aSig >>= shiftCount; - z = aSig; - if ( aSign ) z = - z; - if ( ( z < 0 ) ^ aSign ) { - invalid: - float_raise(float_flag_invalid, status); - return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF; - } - if ( ( aSig<<shiftCount ) != savedASig ) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 16-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int16_t float64_to_int16_round_to_zero(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig, savedASig; - int32_t z; - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( 0x40E < aExp ) { - if ( ( aExp == 0x7FF ) && aSig ) { - aSign = 0; - } - goto invalid; - } - else if ( aExp < 0x3FF ) { - if ( aExp || aSig ) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - aSig |= LIT64( 0x0010000000000000 ); - shiftCount = 0x433 - aExp; - savedASig = aSig; - aSig >>= shiftCount; - z = aSig; - if ( aSign ) { - z = - z; - } - if ( ( (int16_t)z < 0 ) ^ aSign ) { - invalid: - float_raise(float_flag_invalid, status); - return aSign ? (int32_t) 0xffff8000 : 0x7FFF; - } - if ( ( aSig<<shiftCount ) != savedASig ) { - status->float_exception_flags |= float_flag_inexact; - } - return z; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 64-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int64_t float64_to_int64(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig, aSigExtra; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); - shiftCount = 0x433 - aExp; - if ( shiftCount <= 0 ) { - if ( 0x43E < aExp ) { - float_raise(float_flag_invalid, status); - if ( ! aSign - || ( ( aExp == 0x7FF ) - && ( aSig != LIT64( 0x0010000000000000 ) ) ) - ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - aSigExtra = 0; - aSig <<= - shiftCount; - } - else { - shift64ExtraRightJamming( aSig, 0, shiftCount, &aSig, &aSigExtra ); - } - return roundAndPackInt64(aSign, aSig, aSigExtra, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 64-bit two's complement integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int64_t float64_to_int64_round_to_zero(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig; - int64_t z; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp ) aSig |= LIT64( 0x0010000000000000 ); - shiftCount = aExp - 0x433; - if ( 0 <= shiftCount ) { - if ( 0x43E <= aExp ) { - if ( float64_val(a) != LIT64( 0xC3E0000000000000 ) ) { - float_raise(float_flag_invalid, status); - if ( ! aSign - || ( ( aExp == 0x7FF ) - && ( aSig != LIT64( 0x0010000000000000 ) ) ) - ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - z = aSig<<shiftCount; - } - else { - if ( aExp < 0x3FE ) { - if (aExp | aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - z = aSig>>( - shiftCount ); - if ( (uint64_t) ( aSig<<( shiftCount & 63 ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - } - if ( aSign ) z = - z; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the single-precision floating-point format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float64_to_float32(float64 a, float_status *status) -{ - flag aSign; - int aExp; - uint64_t aSig; - uint32_t zSig; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp == 0x7FF ) { - if (aSig) { - return commonNaNToFloat32(float64ToCommonNaN(a, status), status); - } - return packFloat32( aSign, 0xFF, 0 ); - } - shift64RightJamming( aSig, 22, &aSig ); - zSig = aSig; - if ( aExp || zSig ) { - zSig |= 0x40000000; - aExp -= 0x381; - } - return roundAndPackFloat32(aSign, aExp, zSig, status); - -} - - -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a -| half-precision floating-point value, returning the result. After being -| shifted into the proper positions, the three fields are simply added -| together to form the result. This means that any integer portion of `zSig' -| will be added into the exponent. Since a properly normalized significand -| will have an integer portion equal to 1, the `zExp' input should be 1 less -| than the desired result exponent whenever `zSig' is a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ -static float16 packFloat16(flag zSign, int zExp, uint16_t zSig) -{ - return make_float16( - (((uint32_t)zSign) << 15) + (((uint32_t)zExp) << 10) + zSig); -} - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper half-precision floating- -| point value corresponding to the abstract input. Ordinarily, the abstract -| value is simply rounded and packed into the half-precision format, with -| the inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal half- -| precision floating-point number. -| The `ieee' flag indicates whether to use IEEE standard half precision, or -| ARM-style "alternative representation", which omits the NaN and Inf -| encodings in order to raise the maximum representable exponent by one. -| The input significand `zSig' has its binary point between bits 22 -| and 23, which is 13 bits to the left of the usual location. This shifted -| significand must be normalized or smaller. If `zSig' is not normalized, -| `zExp' must be 0; in that case, the result returned is a subnormal number, -| and it must not require rounding. In the usual case that `zSig' is -| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent. -| Note the slightly odd position of the binary point in zSig compared with the -| other roundAndPackFloat functions. This should probably be fixed if we -| need to implement more float16 routines than just conversion. -| The handling of underflow and overflow follows the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float16 roundAndPackFloat16(flag zSign, int zExp, - uint32_t zSig, flag ieee, - float_status *status) -{ - int maxexp = ieee ? 29 : 30; - uint32_t mask; - uint32_t increment; - bool rounding_bumps_exp; - bool is_tiny = false; - - /* Calculate the mask of bits of the mantissa which are not - * representable in half-precision and will be lost. - */ - if (zExp < 1) { - /* Will be denormal in halfprec */ - mask = 0x00ffffff; - if (zExp >= -11) { - mask >>= 11 + zExp; - } - } else { - /* Normal number in halfprec */ - mask = 0x00001fff; - } - - switch (status->float_rounding_mode) { - case float_round_nearest_even: - increment = (mask + 1) >> 1; - if ((zSig & mask) == increment) { - increment = zSig & (increment << 1); - } - break; - case float_round_ties_away: - increment = (mask + 1) >> 1; - break; - case float_round_up: - increment = zSign ? 0 : mask; - break; - case float_round_down: - increment = zSign ? mask : 0; - break; - default: /* round_to_zero */ - increment = 0; - break; - } - - rounding_bumps_exp = (zSig + increment >= 0x01000000); - - if (zExp > maxexp || (zExp == maxexp && rounding_bumps_exp)) { - if (ieee) { - float_raise(float_flag_overflow | float_flag_inexact, status); - return packFloat16(zSign, 0x1f, 0); - } else { - float_raise(float_flag_invalid, status); - return packFloat16(zSign, 0x1f, 0x3ff); - } - } - - if (zExp < 0) { - /* Note that flush-to-zero does not affect half-precision results */ - is_tiny = - (status->float_detect_tininess == float_tininess_before_rounding) - || (zExp < -1) - || (!rounding_bumps_exp); - } - if (zSig & mask) { - float_raise(float_flag_inexact, status); - if (is_tiny) { - float_raise(float_flag_underflow, status); - } - } - - zSig += increment; - if (rounding_bumps_exp) { - zSig >>= 1; - zExp++; - } - - if (zExp < -10) { - return packFloat16(zSign, 0, 0); - } - if (zExp < 0) { - zSig >>= -zExp; - zExp = 0; - } - return packFloat16(zSign, zExp, zSig >> 13); -} - -static void normalizeFloat16Subnormal(uint32_t aSig, int *zExpPtr, - uint32_t *zSigPtr) -{ - int8_t shiftCount = countLeadingZeros32(aSig) - 21; - *zSigPtr = aSig << shiftCount; - *zExpPtr = 1 - shiftCount; -} - -/* Half precision floats come in two formats: standard IEEE and "ARM" format. - The latter gains extra exponent range by omitting the NaN/Inf encodings. */ - -float32 float16_to_float32(float16 a, flag ieee, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - - aSign = extractFloat16Sign(a); - aExp = extractFloat16Exp(a); - aSig = extractFloat16Frac(a); - - if (aExp == 0x1f && ieee) { - if (aSig) { - return commonNaNToFloat32(float16ToCommonNaN(a, status), status); - } - return packFloat32(aSign, 0xff, 0); - } - if (aExp == 0) { - if (aSig == 0) { - return packFloat32(aSign, 0, 0); - } - - normalizeFloat16Subnormal(aSig, &aExp, &aSig); - aExp--; - } - return packFloat32( aSign, aExp + 0x70, aSig << 13); -} - -float16 float32_to_float16(float32 a, flag ieee, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - - a = float32_squash_input_denormal(a, status); - - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - if ( aExp == 0xFF ) { - if (aSig) { - /* Input is a NaN */ - if (!ieee) { - float_raise(float_flag_invalid, status); - return packFloat16(aSign, 0, 0); - } - return commonNaNToFloat16( - float32ToCommonNaN(a, status), status); - } - /* Infinity */ - if (!ieee) { - float_raise(float_flag_invalid, status); - return packFloat16(aSign, 0x1f, 0x3ff); - } - return packFloat16(aSign, 0x1f, 0); - } - if (aExp == 0 && aSig == 0) { - return packFloat16(aSign, 0, 0); - } - /* Decimal point between bits 22 and 23. Note that we add the 1 bit - * even if the input is denormal; however this is harmless because - * the largest possible single-precision denormal is still smaller - * than the smallest representable half-precision denormal, and so we - * will end up ignoring aSig and returning via the "always return zero" - * codepath. - */ - aSig |= 0x00800000; - aExp -= 0x71; - - return roundAndPackFloat16(aSign, aExp, aSig, ieee, status); -} - -float64 float16_to_float64(float16 a, flag ieee, float_status *status) -{ - flag aSign; - int aExp; - uint32_t aSig; - - aSign = extractFloat16Sign(a); - aExp = extractFloat16Exp(a); - aSig = extractFloat16Frac(a); - - if (aExp == 0x1f && ieee) { - if (aSig) { - return commonNaNToFloat64( - float16ToCommonNaN(a, status), status); - } - return packFloat64(aSign, 0x7ff, 0); - } - if (aExp == 0) { - if (aSig == 0) { - return packFloat64(aSign, 0, 0); - } - - normalizeFloat16Subnormal(aSig, &aExp, &aSig); - aExp--; - } - return packFloat64(aSign, aExp + 0x3f0, ((uint64_t)aSig) << 42); -} - -float16 float64_to_float16(float64 a, flag ieee, float_status *status) -{ - flag aSign; - int aExp; - uint64_t aSig; - uint32_t zSig; - - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac(a); - aExp = extractFloat64Exp(a); - aSign = extractFloat64Sign(a); - if (aExp == 0x7FF) { - if (aSig) { - /* Input is a NaN */ - if (!ieee) { - float_raise(float_flag_invalid, status); - return packFloat16(aSign, 0, 0); - } - return commonNaNToFloat16( - float64ToCommonNaN(a, status), status); - } - /* Infinity */ - if (!ieee) { - float_raise(float_flag_invalid, status); - return packFloat16(aSign, 0x1f, 0x3ff); - } - return packFloat16(aSign, 0x1f, 0); - } - shift64RightJamming(aSig, 29, &aSig); - zSig = aSig; - if (aExp == 0 && zSig == 0) { - return packFloat16(aSign, 0, 0); - } - /* Decimal point between bits 22 and 23. Note that we add the 1 bit - * even if the input is denormal; however this is harmless because - * the largest possible single-precision denormal is still smaller - * than the smallest representable half-precision denormal, and so we - * will end up ignoring aSig and returning via the "always return zero" - * codepath. - */ - zSig |= 0x00800000; - aExp -= 0x3F1; - - return roundAndPackFloat16(aSign, aExp, zSig, ieee, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the extended double-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 float64_to_floatx80(float64 a, float_status *status) -{ - flag aSign; - int aExp; - uint64_t aSig; - - a = float64_squash_input_denormal(a, status); - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp == 0x7FF ) { - if (aSig) { - return commonNaNToFloatx80(float64ToCommonNaN(a, status), status); - } - return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 ); - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - return - packFloatx80( - aSign, aExp + 0x3C00, ( aSig | LIT64( 0x0010000000000000 ) )<<11 ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the quadruple-precision floating-point format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float64_to_float128(float64 a, float_status *status) -{ - flag aSign; - int aExp; - uint64_t aSig, zSig0, zSig1; - - a = float64_squash_input_denormal(a, status); - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp == 0x7FF ) { - if (aSig) { - return commonNaNToFloat128(float64ToCommonNaN(a, status), status); - } - return packFloat128( aSign, 0x7FFF, 0, 0 ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat128( aSign, 0, 0, 0 ); - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - --aExp; - } - shift128Right( aSig, 0, 4, &zSig0, &zSig1 ); - return packFloat128( aSign, aExp + 0x3C00, zSig0, zSig1 ); - -} - -/*---------------------------------------------------------------------------- -| Rounds the double-precision floating-point value `a' to an integer, and -| returns the result as a double-precision floating-point value. The -| operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_round_to_int(float64 a, float_status *status) -{ - flag aSign; - int aExp; - uint64_t lastBitMask, roundBitsMask; - uint64_t z; - a = float64_squash_input_denormal(a, status); - - aExp = extractFloat64Exp( a ); - if ( 0x433 <= aExp ) { - if ( ( aExp == 0x7FF ) && extractFloat64Frac( a ) ) { - return propagateFloat64NaN(a, a, status); - } - return a; - } - if ( aExp < 0x3FF ) { - if ( (uint64_t) ( float64_val(a)<<1 ) == 0 ) return a; - status->float_exception_flags |= float_flag_inexact; - aSign = extractFloat64Sign( a ); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) { - return packFloat64( aSign, 0x3FF, 0 ); - } - break; - case float_round_ties_away: - if (aExp == 0x3FE) { - return packFloat64(aSign, 0x3ff, 0); - } - break; - case float_round_down: - return make_float64(aSign ? LIT64( 0xBFF0000000000000 ) : 0); - case float_round_up: - return make_float64( - aSign ? LIT64( 0x8000000000000000 ) : LIT64( 0x3FF0000000000000 )); - } - return packFloat64( aSign, 0, 0 ); - } - lastBitMask = 1; - lastBitMask <<= 0x433 - aExp; - roundBitsMask = lastBitMask - 1; - z = float64_val(a); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - z += lastBitMask >> 1; - if ((z & roundBitsMask) == 0) { - z &= ~lastBitMask; - } - break; - case float_round_ties_away: - z += lastBitMask >> 1; - break; - case float_round_to_zero: - break; - case float_round_up: - if (!extractFloat64Sign(make_float64(z))) { - z += roundBitsMask; - } - break; - case float_round_down: - if (extractFloat64Sign(make_float64(z))) { - z += roundBitsMask; - } - break; - default: - abort(); - } - z &= ~ roundBitsMask; - if (z != float64_val(a)) { - status->float_exception_flags |= float_flag_inexact; - } - return make_float64(z); - -} - -float64 float64_trunc_to_int(float64 a, float_status *status) -{ - int oldmode; - float64 res; - oldmode = status->float_rounding_mode; - status->float_rounding_mode = float_round_to_zero; - res = float64_round_to_int(a, status); - status->float_rounding_mode = oldmode; - return res; -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the double-precision -| floating-point values `a' and `b'. If `zSign' is 1, the sum is negated -| before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float64 addFloat64Sigs(float64 a, float64 b, flag zSign, - float_status *status) -{ - int aExp, bExp, zExp; - uint64_t aSig, bSig, zSig; - int expDiff; - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - bSig = extractFloat64Frac( b ); - bExp = extractFloat64Exp( b ); - expDiff = aExp - bExp; - aSig <<= 9; - bSig <<= 9; - if ( 0 < expDiff ) { - if ( aExp == 0x7FF ) { - if (aSig) { - return propagateFloat64NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig |= LIT64( 0x2000000000000000 ); - } - shift64RightJamming( bSig, expDiff, &bSig ); - zExp = aExp; - } - else if ( expDiff < 0 ) { - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - return packFloat64( zSign, 0x7FF, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig |= LIT64( 0x2000000000000000 ); - } - shift64RightJamming( aSig, - expDiff, &aSig ); - zExp = bExp; - } - else { - if ( aExp == 0x7FF ) { - if (aSig | bSig) { - return propagateFloat64NaN(a, b, status); - } - return a; - } - if ( aExp == 0 ) { - if (status->flush_to_zero) { - if (aSig | bSig) { - float_raise(float_flag_output_denormal, status); - } - return packFloat64(zSign, 0, 0); - } - return packFloat64( zSign, 0, ( aSig + bSig )>>9 ); - } - zSig = LIT64( 0x4000000000000000 ) + aSig + bSig; - zExp = aExp; - goto roundAndPack; - } - aSig |= LIT64( 0x2000000000000000 ); - zSig = ( aSig + bSig )<<1; - --zExp; - if ( (int64_t) zSig < 0 ) { - zSig = aSig + bSig; - ++zExp; - } - roundAndPack: - return roundAndPackFloat64(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the double- -| precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float64 subFloat64Sigs(float64 a, float64 b, flag zSign, - float_status *status) -{ - int aExp, bExp, zExp; - uint64_t aSig, bSig, zSig; - int expDiff; - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - bSig = extractFloat64Frac( b ); - bExp = extractFloat64Exp( b ); - expDiff = aExp - bExp; - aSig <<= 10; - bSig <<= 10; - if ( 0 < expDiff ) goto aExpBigger; - if ( expDiff < 0 ) goto bExpBigger; - if ( aExp == 0x7FF ) { - if (aSig | bSig) { - return propagateFloat64NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - if ( aExp == 0 ) { - aExp = 1; - bExp = 1; - } - if ( bSig < aSig ) goto aBigger; - if ( aSig < bSig ) goto bBigger; - return packFloat64(status->float_rounding_mode == float_round_down, 0, 0); - bExpBigger: - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - return packFloat64( zSign ^ 1, 0x7FF, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig |= LIT64( 0x4000000000000000 ); - } - shift64RightJamming( aSig, - expDiff, &aSig ); - bSig |= LIT64( 0x4000000000000000 ); - bBigger: - zSig = bSig - aSig; - zExp = bExp; - zSign ^= 1; - goto normalizeRoundAndPack; - aExpBigger: - if ( aExp == 0x7FF ) { - if (aSig) { - return propagateFloat64NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig |= LIT64( 0x4000000000000000 ); - } - shift64RightJamming( bSig, expDiff, &bSig ); - aSig |= LIT64( 0x4000000000000000 ); - aBigger: - zSig = aSig - bSig; - zExp = aExp; - normalizeRoundAndPack: - --zExp; - return normalizeRoundAndPackFloat64(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the double-precision floating-point values `a' -| and `b'. The operation is performed according to the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_add(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - if ( aSign == bSign ) { - return addFloat64Sigs(a, b, aSign, status); - } - else { - return subFloat64Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the double-precision floating-point values -| `a' and `b'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_sub(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - if ( aSign == bSign ) { - return subFloat64Sigs(a, b, aSign, status); - } - else { - return addFloat64Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the double-precision floating-point values -| `a' and `b'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_mul(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign, zSign; - int aExp, bExp, zExp; - uint64_t aSig, bSig, zSig0, zSig1; - - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - bSig = extractFloat64Frac( b ); - bExp = extractFloat64Exp( b ); - bSign = extractFloat64Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FF ) { - if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) { - return propagateFloat64NaN(a, b, status); - } - if ( ( bExp | bSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - return packFloat64( zSign, 0x7FF, 0 ); - } - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - if ( ( aExp | aSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - return packFloat64( zSign, 0x7FF, 0 ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat64( zSign, 0, 0 ); - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) return packFloat64( zSign, 0, 0 ); - normalizeFloat64Subnormal( bSig, &bExp, &bSig ); - } - zExp = aExp + bExp - 0x3FF; - aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10; - bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11; - mul64To128( aSig, bSig, &zSig0, &zSig1 ); - zSig0 |= ( zSig1 != 0 ); - if ( 0 <= (int64_t) ( zSig0<<1 ) ) { - zSig0 <<= 1; - --zExp; - } - return roundAndPackFloat64(zSign, zExp, zSig0, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of dividing the double-precision floating-point value `a' -| by the corresponding value `b'. The operation is performed according to -| the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_div(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign, zSign; - int aExp, bExp, zExp; - uint64_t aSig, bSig, zSig; - uint64_t rem0, rem1; - uint64_t term0, term1; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - bSig = extractFloat64Frac( b ); - bExp = extractFloat64Exp( b ); - bSign = extractFloat64Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FF ) { - if (aSig) { - return propagateFloat64NaN(a, b, status); - } - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - return packFloat64( zSign, 0x7FF, 0 ); - } - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - return packFloat64( zSign, 0, 0 ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - if ( ( aExp | aSig ) == 0 ) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - float_raise(float_flag_divbyzero, status); - return packFloat64( zSign, 0x7FF, 0 ); - } - normalizeFloat64Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat64( zSign, 0, 0 ); - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - zExp = aExp - bExp + 0x3FD; - aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10; - bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11; - if ( bSig <= ( aSig + aSig ) ) { - aSig >>= 1; - ++zExp; - } - zSig = estimateDiv128To64( aSig, 0, bSig ); - if ( ( zSig & 0x1FF ) <= 2 ) { - mul64To128( bSig, zSig, &term0, &term1 ); - sub128( aSig, 0, term0, term1, &rem0, &rem1 ); - while ( (int64_t) rem0 < 0 ) { - --zSig; - add128( rem0, rem1, 0, bSig, &rem0, &rem1 ); - } - zSig |= ( rem1 != 0 ); - } - return roundAndPackFloat64(zSign, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the remainder of the double-precision floating-point value `a' -| with respect to the corresponding value `b'. The operation is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_rem(float64 a, float64 b, float_status *status) -{ - flag aSign, zSign; - int aExp, bExp, expDiff; - uint64_t aSig, bSig; - uint64_t q, alternateASig; - int64_t sigMean; - - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - bSig = extractFloat64Frac( b ); - bExp = extractFloat64Exp( b ); - if ( aExp == 0x7FF ) { - if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) { - return propagateFloat64NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - if ( bExp == 0x7FF ) { - if (bSig) { - return propagateFloat64NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - normalizeFloat64Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return a; - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - expDiff = aExp - bExp; - aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<11; - bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11; - if ( expDiff < 0 ) { - if ( expDiff < -1 ) return a; - aSig >>= 1; - } - q = ( bSig <= aSig ); - if ( q ) aSig -= bSig; - expDiff -= 64; - while ( 0 < expDiff ) { - q = estimateDiv128To64( aSig, 0, bSig ); - q = ( 2 < q ) ? q - 2 : 0; - aSig = - ( ( bSig>>2 ) * q ); - expDiff -= 62; - } - expDiff += 64; - if ( 0 < expDiff ) { - q = estimateDiv128To64( aSig, 0, bSig ); - q = ( 2 < q ) ? q - 2 : 0; - q >>= 64 - expDiff; - bSig >>= 2; - aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q; - } - else { - aSig >>= 2; - bSig >>= 2; - } - do { - alternateASig = aSig; - ++q; - aSig -= bSig; - } while ( 0 <= (int64_t) aSig ); - sigMean = aSig + alternateASig; - if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) { - aSig = alternateASig; - } - zSign = ( (int64_t) aSig < 0 ); - if ( zSign ) aSig = - aSig; - return normalizeRoundAndPackFloat64(aSign ^ zSign, bExp, aSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the double-precision floating-point values -| `a' and `b' then adding 'c', with no intermediate rounding step after the -| multiplication. The operation is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic 754-2008. -| The flags argument allows the caller to select negation of the -| addend, the intermediate product, or the final result. (The difference -| between this and having the caller do a separate negation is that negating -| externally will flip the sign bit on NaNs.) -*----------------------------------------------------------------------------*/ - -float64 float64_muladd(float64 a, float64 b, float64 c, int flags, - float_status *status) -{ - flag aSign, bSign, cSign, zSign; - int aExp, bExp, cExp, pExp, zExp, expDiff; - uint64_t aSig, bSig, cSig; - flag pInf, pZero, pSign; - uint64_t pSig0, pSig1, cSig0, cSig1, zSig0, zSig1; - int shiftcount; - flag signflip, infzero; - - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - c = float64_squash_input_denormal(c, status); - aSig = extractFloat64Frac(a); - aExp = extractFloat64Exp(a); - aSign = extractFloat64Sign(a); - bSig = extractFloat64Frac(b); - bExp = extractFloat64Exp(b); - bSign = extractFloat64Sign(b); - cSig = extractFloat64Frac(c); - cExp = extractFloat64Exp(c); - cSign = extractFloat64Sign(c); - - infzero = ((aExp == 0 && aSig == 0 && bExp == 0x7ff && bSig == 0) || - (aExp == 0x7ff && aSig == 0 && bExp == 0 && bSig == 0)); - - /* It is implementation-defined whether the cases of (0,inf,qnan) - * and (inf,0,qnan) raise InvalidOperation or not (and what QNaN - * they return if they do), so we have to hand this information - * off to the target-specific pick-a-NaN routine. - */ - if (((aExp == 0x7ff) && aSig) || - ((bExp == 0x7ff) && bSig) || - ((cExp == 0x7ff) && cSig)) { - return propagateFloat64MulAddNaN(a, b, c, infzero, status); - } - - if (infzero) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - - if (flags & float_muladd_negate_c) { - cSign ^= 1; - } - - signflip = (flags & float_muladd_negate_result) ? 1 : 0; - - /* Work out the sign and type of the product */ - pSign = aSign ^ bSign; - if (flags & float_muladd_negate_product) { - pSign ^= 1; - } - pInf = (aExp == 0x7ff) || (bExp == 0x7ff); - pZero = ((aExp | aSig) == 0) || ((bExp | bSig) == 0); - - if (cExp == 0x7ff) { - if (pInf && (pSign ^ cSign)) { - /* addition of opposite-signed infinities => InvalidOperation */ - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - /* Otherwise generate an infinity of the same sign */ - return packFloat64(cSign ^ signflip, 0x7ff, 0); - } - - if (pInf) { - return packFloat64(pSign ^ signflip, 0x7ff, 0); - } - - if (pZero) { - if (cExp == 0) { - if (cSig == 0) { - /* Adding two exact zeroes */ - if (pSign == cSign) { - zSign = pSign; - } else if (status->float_rounding_mode == float_round_down) { - zSign = 1; - } else { - zSign = 0; - } - return packFloat64(zSign ^ signflip, 0, 0); - } - /* Exact zero plus a denorm */ - if (status->flush_to_zero) { - float_raise(float_flag_output_denormal, status); - return packFloat64(cSign ^ signflip, 0, 0); - } - } - /* Zero plus something non-zero : just return the something */ - if (flags & float_muladd_halve_result) { - if (cExp == 0) { - normalizeFloat64Subnormal(cSig, &cExp, &cSig); - } - /* Subtract one to halve, and one again because roundAndPackFloat64 - * wants one less than the true exponent. - */ - cExp -= 2; - cSig = (cSig | 0x0010000000000000ULL) << 10; - return roundAndPackFloat64(cSign ^ signflip, cExp, cSig, status); - } - return packFloat64(cSign ^ signflip, cExp, cSig); - } - - if (aExp == 0) { - normalizeFloat64Subnormal(aSig, &aExp, &aSig); - } - if (bExp == 0) { - normalizeFloat64Subnormal(bSig, &bExp, &bSig); - } - - /* Calculate the actual result a * b + c */ - - /* Multiply first; this is easy. */ - /* NB: we subtract 0x3fe where float64_mul() subtracts 0x3ff - * because we want the true exponent, not the "one-less-than" - * flavour that roundAndPackFloat64() takes. - */ - pExp = aExp + bExp - 0x3fe; - aSig = (aSig | LIT64(0x0010000000000000))<<10; - bSig = (bSig | LIT64(0x0010000000000000))<<11; - mul64To128(aSig, bSig, &pSig0, &pSig1); - if ((int64_t)(pSig0 << 1) >= 0) { - shortShift128Left(pSig0, pSig1, 1, &pSig0, &pSig1); - pExp--; - } - - zSign = pSign ^ signflip; - - /* Now [pSig0:pSig1] is the significand of the multiply, with the explicit - * bit in position 126. - */ - if (cExp == 0) { - if (!cSig) { - /* Throw out the special case of c being an exact zero now */ - shift128RightJamming(pSig0, pSig1, 64, &pSig0, &pSig1); - if (flags & float_muladd_halve_result) { - pExp--; - } - return roundAndPackFloat64(zSign, pExp - 1, - pSig1, status); - } - normalizeFloat64Subnormal(cSig, &cExp, &cSig); - } - - /* Shift cSig and add the explicit bit so [cSig0:cSig1] is the - * significand of the addend, with the explicit bit in position 126. - */ - cSig0 = cSig << (126 - 64 - 52); - cSig1 = 0; - cSig0 |= LIT64(0x4000000000000000); - expDiff = pExp - cExp; - - if (pSign == cSign) { - /* Addition */ - if (expDiff > 0) { - /* scale c to match p */ - shift128RightJamming(cSig0, cSig1, expDiff, &cSig0, &cSig1); - zExp = pExp; - } else if (expDiff < 0) { - /* scale p to match c */ - shift128RightJamming(pSig0, pSig1, -expDiff, &pSig0, &pSig1); - zExp = cExp; - } else { - /* no scaling needed */ - zExp = cExp; - } - /* Add significands and make sure explicit bit ends up in posn 126 */ - add128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1); - if ((int64_t)zSig0 < 0) { - shift128RightJamming(zSig0, zSig1, 1, &zSig0, &zSig1); - } else { - zExp--; - } - shift128RightJamming(zSig0, zSig1, 64, &zSig0, &zSig1); - if (flags & float_muladd_halve_result) { - zExp--; - } - return roundAndPackFloat64(zSign, zExp, zSig1, status); - } else { - /* Subtraction */ - if (expDiff > 0) { - shift128RightJamming(cSig0, cSig1, expDiff, &cSig0, &cSig1); - sub128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1); - zExp = pExp; - } else if (expDiff < 0) { - shift128RightJamming(pSig0, pSig1, -expDiff, &pSig0, &pSig1); - sub128(cSig0, cSig1, pSig0, pSig1, &zSig0, &zSig1); - zExp = cExp; - zSign ^= 1; - } else { - zExp = pExp; - if (lt128(cSig0, cSig1, pSig0, pSig1)) { - sub128(pSig0, pSig1, cSig0, cSig1, &zSig0, &zSig1); - } else if (lt128(pSig0, pSig1, cSig0, cSig1)) { - sub128(cSig0, cSig1, pSig0, pSig1, &zSig0, &zSig1); - zSign ^= 1; - } else { - /* Exact zero */ - zSign = signflip; - if (status->float_rounding_mode == float_round_down) { - zSign ^= 1; - } - return packFloat64(zSign, 0, 0); - } - } - --zExp; - /* Do the equivalent of normalizeRoundAndPackFloat64() but - * starting with the significand in a pair of uint64_t. - */ - if (zSig0) { - shiftcount = countLeadingZeros64(zSig0) - 1; - shortShift128Left(zSig0, zSig1, shiftcount, &zSig0, &zSig1); - if (zSig1) { - zSig0 |= 1; - } - zExp -= shiftcount; - } else { - shiftcount = countLeadingZeros64(zSig1); - if (shiftcount == 0) { - zSig0 = (zSig1 >> 1) | (zSig1 & 1); - zExp -= 63; - } else { - shiftcount--; - zSig0 = zSig1 << shiftcount; - zExp -= (shiftcount + 64); - } - } - if (flags & float_muladd_halve_result) { - zExp--; - } - return roundAndPackFloat64(zSign, zExp, zSig0, status); - } -} - -/*---------------------------------------------------------------------------- -| Returns the square root of the double-precision floating-point value `a'. -| The operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float64_sqrt(float64 a, float_status *status) -{ - flag aSign; - int aExp, zExp; - uint64_t aSig, zSig, doubleZSig; - uint64_t rem0, rem1, term0, term1; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - if ( aExp == 0x7FF ) { - if (aSig) { - return propagateFloat64NaN(a, a, status); - } - if ( ! aSign ) return a; - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - if ( aSign ) { - if ( ( aExp | aSig ) == 0 ) return a; - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return float64_zero; - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - zExp = ( ( aExp - 0x3FF )>>1 ) + 0x3FE; - aSig |= LIT64( 0x0010000000000000 ); - zSig = estimateSqrt32( aExp, aSig>>21 ); - aSig <<= 9 - ( aExp & 1 ); - zSig = estimateDiv128To64( aSig, 0, zSig<<32 ) + ( zSig<<30 ); - if ( ( zSig & 0x1FF ) <= 5 ) { - doubleZSig = zSig<<1; - mul64To128( zSig, zSig, &term0, &term1 ); - sub128( aSig, 0, term0, term1, &rem0, &rem1 ); - while ( (int64_t) rem0 < 0 ) { - --zSig; - doubleZSig -= 2; - add128( rem0, rem1, zSig>>63, doubleZSig | 1, &rem0, &rem1 ); - } - zSig |= ( ( rem0 | rem1 ) != 0 ); - } - return roundAndPackFloat64(0, zExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the binary log of the double-precision floating-point value `a'. -| The operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float64 float64_log2(float64 a, float_status *status) -{ - flag aSign, zSign; - int aExp; - uint64_t aSig, aSig0, aSig1, zSig, i; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloat64( 1, 0x7FF, 0 ); - normalizeFloat64Subnormal( aSig, &aExp, &aSig ); - } - if ( aSign ) { - float_raise(float_flag_invalid, status); - return float64_default_nan; - } - if ( aExp == 0x7FF ) { - if (aSig) { - return propagateFloat64NaN(a, float64_zero, status); - } - return a; - } - - aExp -= 0x3FF; - aSig |= LIT64( 0x0010000000000000 ); - zSign = aExp < 0; - zSig = (uint64_t)aExp << 52; - for (i = 1LL << 51; i > 0; i >>= 1) { - mul64To128( aSig, aSig, &aSig0, &aSig1 ); - aSig = ( aSig0 << 12 ) | ( aSig1 >> 52 ); - if ( aSig & LIT64( 0x0020000000000000 ) ) { - aSig >>= 1; - zSig |= i; - } - } - - if ( zSign ) - zSig = -zSig; - return normalizeRoundAndPackFloat64(zSign, 0x408, zSig, status); -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is equal to the -| corresponding value `b', and 0 otherwise. The invalid exception is raised -| if either operand is a NaN. Otherwise, the comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_eq(float64 a, float64 b, float_status *status) -{ - uint64_t av, bv; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - av = float64_val(a); - bv = float64_val(b); - return ( av == bv ) || ( (uint64_t) ( ( av | bv )<<1 ) == 0 ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is less than or -| equal to the corresponding value `b', and 0 otherwise. The invalid -| exception is raised if either operand is a NaN. The comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_le(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - uint64_t av, bv; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - av = float64_val(a); - bv = float64_val(b); - if ( aSign != bSign ) return aSign || ( (uint64_t) ( ( av | bv )<<1 ) == 0 ); - return ( av == bv ) || ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. The comparison is performed according -| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_lt(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - uint64_t av, bv; - - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - av = float64_val(a); - bv = float64_val(b); - if ( aSign != bSign ) return aSign && ( (uint64_t) ( ( av | bv )<<1 ) != 0 ); - return ( av != bv ) && ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. The invalid exception is raised if either -| operand is a NaN. The comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_unordered(float64 a, float64 b, float_status *status) -{ - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - float_raise(float_flag_invalid, status); - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is equal to the -| corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception.The comparison is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_eq_quiet(float64 a, float64 b, float_status *status) -{ - uint64_t av, bv; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - av = float64_val(a); - bv = float64_val(b); - return ( av == bv ) || ( (uint64_t) ( ( av | bv )<<1 ) == 0 ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is less than or -| equal to the corresponding value `b', and 0 otherwise. Quiet NaNs do not -| cause an exception. Otherwise, the comparison is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_le_quiet(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - uint64_t av, bv; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - av = float64_val(a); - bv = float64_val(b); - if ( aSign != bSign ) return aSign || ( (uint64_t) ( ( av | bv )<<1 ) == 0 ); - return ( av == bv ) || ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception. Otherwise, the comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_lt_quiet(float64 a, float64 b, float_status *status) -{ - flag aSign, bSign; - uint64_t av, bv; - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat64Sign( a ); - bSign = extractFloat64Sign( b ); - av = float64_val(a); - bv = float64_val(b); - if ( aSign != bSign ) return aSign && ( (uint64_t) ( ( av | bv )<<1 ) != 0 ); - return ( av != bv ) && ( aSign ^ ( av < bv ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. Quiet NaNs do not cause an exception. The -| comparison is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float64_unordered_quiet(float64 a, float64 b, float_status *status) -{ - a = float64_squash_input_denormal(a, status); - b = float64_squash_input_denormal(b, status); - - if ( ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) ) - || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) ) - ) { - if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the 32-bit two's complement integer format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic---which means in particular that the conversion -| is rounded according to the current rounding mode. If `a' is a NaN, the -| largest positive integer is returned. Otherwise, if the conversion -| overflows, the largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int32_t floatx80_to_int32(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) aSign = 0; - shiftCount = 0x4037 - aExp; - if ( shiftCount <= 0 ) shiftCount = 1; - shift64RightJamming( aSig, shiftCount, &aSig ); - return roundAndPackInt32(aSign, aSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the 32-bit two's complement integer format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic, except that the conversion is always rounded -| toward zero. If `a' is a NaN, the largest positive integer is returned. -| Otherwise, if the conversion overflows, the largest integer with the same -| sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int32_t floatx80_to_int32_round_to_zero(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig, savedASig; - int32_t z; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( 0x401E < aExp ) { - if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) aSign = 0; - goto invalid; - } - else if ( aExp < 0x3FFF ) { - if (aExp || aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - shiftCount = 0x403E - aExp; - savedASig = aSig; - aSig >>= shiftCount; - z = aSig; - if ( aSign ) z = - z; - if ( ( z < 0 ) ^ aSign ) { - invalid: - float_raise(float_flag_invalid, status); - return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF; - } - if ( ( aSig<<shiftCount ) != savedASig ) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the 64-bit two's complement integer format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic---which means in particular that the conversion -| is rounded according to the current rounding mode. If `a' is a NaN, -| the largest positive integer is returned. Otherwise, if the conversion -| overflows, the largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int64_t floatx80_to_int64(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig, aSigExtra; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - shiftCount = 0x403E - aExp; - if ( shiftCount <= 0 ) { - if ( shiftCount ) { - float_raise(float_flag_invalid, status); - if ( ! aSign - || ( ( aExp == 0x7FFF ) - && ( aSig != LIT64( 0x8000000000000000 ) ) ) - ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - aSigExtra = 0; - } - else { - shift64ExtraRightJamming( aSig, 0, shiftCount, &aSig, &aSigExtra ); - } - return roundAndPackInt64(aSign, aSig, aSigExtra, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the 64-bit two's complement integer format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic, except that the conversion is always rounded -| toward zero. If `a' is a NaN, the largest positive integer is returned. -| Otherwise, if the conversion overflows, the largest integer with the same -| sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int64_t floatx80_to_int64_round_to_zero(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig; - int64_t z; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - shiftCount = aExp - 0x403E; - if ( 0 <= shiftCount ) { - aSig &= LIT64( 0x7FFFFFFFFFFFFFFF ); - if ( ( a.high != 0xC03E ) || aSig ) { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0x7FFF ) && aSig ) ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - else if ( aExp < 0x3FFF ) { - if (aExp | aSig) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - z = aSig>>( - shiftCount ); - if ( (uint64_t) ( aSig<<( shiftCount & 63 ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - if ( aSign ) z = - z; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the single-precision floating-point format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 floatx80_to_float32(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( aSig<<1 ) ) { - return commonNaNToFloat32(floatx80ToCommonNaN(a, status), status); - } - return packFloat32( aSign, 0xFF, 0 ); - } - shift64RightJamming( aSig, 33, &aSig ); - if ( aExp || aSig ) aExp -= 0x3F81; - return roundAndPackFloat32(aSign, aExp, aSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the double-precision floating-point format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 floatx80_to_float64(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig, zSig; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( aSig<<1 ) ) { - return commonNaNToFloat64(floatx80ToCommonNaN(a, status), status); - } - return packFloat64( aSign, 0x7FF, 0 ); - } - shift64RightJamming( aSig, 1, &zSig ); - if ( aExp || aSig ) aExp -= 0x3C01; - return roundAndPackFloat64(aSign, aExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point value `a' to the quadruple-precision floating-point format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 floatx80_to_float128(floatx80 a, float_status *status) -{ - flag aSign; - int aExp; - uint64_t aSig, zSig0, zSig1; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( ( aExp == 0x7FFF ) && (uint64_t) ( aSig<<1 ) ) { - return commonNaNToFloat128(floatx80ToCommonNaN(a, status), status); - } - shift128Right( aSig<<1, 0, 16, &zSig0, &zSig1 ); - return packFloat128( aSign, aExp, zSig0, zSig1 ); - -} - -/*---------------------------------------------------------------------------- -| Rounds the extended double-precision floating-point value `a' to an integer, -| and returns the result as an extended quadruple-precision floating-point -| value. The operation is performed according to the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_round_to_int(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t lastBitMask, roundBitsMask; - floatx80 z; - - aExp = extractFloatx80Exp( a ); - if ( 0x403E <= aExp ) { - if ( ( aExp == 0x7FFF ) && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) { - return propagateFloatx80NaN(a, a, status); - } - return a; - } - if ( aExp < 0x3FFF ) { - if ( ( aExp == 0 ) - && ( (uint64_t) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) { - return a; - } - status->float_exception_flags |= float_flag_inexact; - aSign = extractFloatx80Sign( a ); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - if ( ( aExp == 0x3FFE ) && (uint64_t) ( extractFloatx80Frac( a )<<1 ) - ) { - return - packFloatx80( aSign, 0x3FFF, LIT64( 0x8000000000000000 ) ); - } - break; - case float_round_ties_away: - if (aExp == 0x3FFE) { - return packFloatx80(aSign, 0x3FFF, LIT64(0x8000000000000000)); - } - break; - case float_round_down: - return - aSign ? - packFloatx80( 1, 0x3FFF, LIT64( 0x8000000000000000 ) ) - : packFloatx80( 0, 0, 0 ); - case float_round_up: - return - aSign ? packFloatx80( 1, 0, 0 ) - : packFloatx80( 0, 0x3FFF, LIT64( 0x8000000000000000 ) ); - } - return packFloatx80( aSign, 0, 0 ); - } - lastBitMask = 1; - lastBitMask <<= 0x403E - aExp; - roundBitsMask = lastBitMask - 1; - z = a; - switch (status->float_rounding_mode) { - case float_round_nearest_even: - z.low += lastBitMask>>1; - if ((z.low & roundBitsMask) == 0) { - z.low &= ~lastBitMask; - } - break; - case float_round_ties_away: - z.low += lastBitMask >> 1; - break; - case float_round_to_zero: - break; - case float_round_up: - if (!extractFloatx80Sign(z)) { - z.low += roundBitsMask; - } - break; - case float_round_down: - if (extractFloatx80Sign(z)) { - z.low += roundBitsMask; - } - break; - default: - abort(); - } - z.low &= ~ roundBitsMask; - if ( z.low == 0 ) { - ++z.high; - z.low = LIT64( 0x8000000000000000 ); - } - if (z.low != a.low) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the extended double- -| precision floating-point values `a' and `b'. If `zSign' is 1, the sum is -| negated before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static floatx80 addFloatx80Sigs(floatx80 a, floatx80 b, flag zSign, - float_status *status) -{ - int32_t aExp, bExp, zExp; - uint64_t aSig, bSig, zSig0, zSig1; - int32_t expDiff; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - bSig = extractFloatx80Frac( b ); - bExp = extractFloatx80Exp( b ); - expDiff = aExp - bExp; - if ( 0 < expDiff ) { - if ( aExp == 0x7FFF ) { - if ((uint64_t)(aSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) --expDiff; - shift64ExtraRightJamming( bSig, 0, expDiff, &bSig, &zSig1 ); - zExp = aExp; - } - else if ( expDiff < 0 ) { - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) ++expDiff; - shift64ExtraRightJamming( aSig, 0, - expDiff, &aSig, &zSig1 ); - zExp = bExp; - } - else { - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( ( aSig | bSig )<<1 ) ) { - return propagateFloatx80NaN(a, b, status); - } - return a; - } - zSig1 = 0; - zSig0 = aSig + bSig; - if ( aExp == 0 ) { - normalizeFloatx80Subnormal( zSig0, &zExp, &zSig0 ); - goto roundAndPack; - } - zExp = aExp; - goto shiftRight1; - } - zSig0 = aSig + bSig; - if ( (int64_t) zSig0 < 0 ) goto roundAndPack; - shiftRight1: - shift64ExtraRightJamming( zSig0, zSig1, 1, &zSig0, &zSig1 ); - zSig0 |= LIT64( 0x8000000000000000 ); - ++zExp; - roundAndPack: - return roundAndPackFloatx80(status->floatx80_rounding_precision, - zSign, zExp, zSig0, zSig1, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the extended -| double-precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static floatx80 subFloatx80Sigs(floatx80 a, floatx80 b, flag zSign, - float_status *status) -{ - int32_t aExp, bExp, zExp; - uint64_t aSig, bSig, zSig0, zSig1; - int32_t expDiff; - floatx80 z; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - bSig = extractFloatx80Frac( b ); - bExp = extractFloatx80Exp( b ); - expDiff = aExp - bExp; - if ( 0 < expDiff ) goto aExpBigger; - if ( expDiff < 0 ) goto bExpBigger; - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( ( aSig | bSig )<<1 ) ) { - return propagateFloatx80NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - if ( aExp == 0 ) { - aExp = 1; - bExp = 1; - } - zSig1 = 0; - if ( bSig < aSig ) goto aBigger; - if ( aSig < bSig ) goto bBigger; - return packFloatx80(status->float_rounding_mode == float_round_down, 0, 0); - bExpBigger: - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return packFloatx80( zSign ^ 1, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) ++expDiff; - shift128RightJamming( aSig, 0, - expDiff, &aSig, &zSig1 ); - bBigger: - sub128( bSig, 0, aSig, zSig1, &zSig0, &zSig1 ); - zExp = bExp; - zSign ^= 1; - goto normalizeRoundAndPack; - aExpBigger: - if ( aExp == 0x7FFF ) { - if ((uint64_t)(aSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) --expDiff; - shift128RightJamming( bSig, 0, expDiff, &bSig, &zSig1 ); - aBigger: - sub128( aSig, 0, bSig, zSig1, &zSig0, &zSig1 ); - zExp = aExp; - normalizeRoundAndPack: - return normalizeRoundAndPackFloatx80(status->floatx80_rounding_precision, - zSign, zExp, zSig0, zSig1, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the extended double-precision floating-point -| values `a' and `b'. The operation is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_add(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign == bSign ) { - return addFloatx80Sigs(a, b, aSign, status); - } - else { - return subFloatx80Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the extended double-precision floating- -| point values `a' and `b'. The operation is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_sub(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign == bSign ) { - return subFloatx80Sigs(a, b, aSign, status); - } - else { - return addFloatx80Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the extended double-precision floating- -| point values `a' and `b'. The operation is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_mul(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign, zSign; - int32_t aExp, bExp, zExp; - uint64_t aSig, bSig, zSig0, zSig1; - floatx80 z; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - bSig = extractFloatx80Frac( b ); - bExp = extractFloatx80Exp( b ); - bSign = extractFloatx80Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( aSig<<1 ) - || ( ( bExp == 0x7FFF ) && (uint64_t) ( bSig<<1 ) ) ) { - return propagateFloatx80NaN(a, b, status); - } - if ( ( bExp | bSig ) == 0 ) goto invalid; - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - if ( ( aExp | aSig ) == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 ); - normalizeFloatx80Subnormal( aSig, &aExp, &aSig ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) return packFloatx80( zSign, 0, 0 ); - normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); - } - zExp = aExp + bExp - 0x3FFE; - mul64To128( aSig, bSig, &zSig0, &zSig1 ); - if ( 0 < (int64_t) zSig0 ) { - shortShift128Left( zSig0, zSig1, 1, &zSig0, &zSig1 ); - --zExp; - } - return roundAndPackFloatx80(status->floatx80_rounding_precision, - zSign, zExp, zSig0, zSig1, status); -} - -/*---------------------------------------------------------------------------- -| Returns the result of dividing the extended double-precision floating-point -| value `a' by the corresponding value `b'. The operation is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_div(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign, zSign; - int32_t aExp, bExp, zExp; - uint64_t aSig, bSig, zSig0, zSig1; - uint64_t rem0, rem1, rem2, term0, term1, term2; - floatx80 z; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - bSig = extractFloatx80Frac( b ); - bExp = extractFloatx80Exp( b ); - bSign = extractFloatx80Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FFF ) { - if ((uint64_t)(aSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - goto invalid; - } - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return packFloatx80( zSign, 0, 0 ); - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - if ( ( aExp | aSig ) == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - float_raise(float_flag_divbyzero, status); - return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 ); - normalizeFloatx80Subnormal( aSig, &aExp, &aSig ); - } - zExp = aExp - bExp + 0x3FFE; - rem1 = 0; - if ( bSig <= aSig ) { - shift128Right( aSig, 0, 1, &aSig, &rem1 ); - ++zExp; - } - zSig0 = estimateDiv128To64( aSig, rem1, bSig ); - mul64To128( bSig, zSig0, &term0, &term1 ); - sub128( aSig, rem1, term0, term1, &rem0, &rem1 ); - while ( (int64_t) rem0 < 0 ) { - --zSig0; - add128( rem0, rem1, 0, bSig, &rem0, &rem1 ); - } - zSig1 = estimateDiv128To64( rem1, 0, bSig ); - if ( (uint64_t) ( zSig1<<1 ) <= 8 ) { - mul64To128( bSig, zSig1, &term1, &term2 ); - sub128( rem1, 0, term1, term2, &rem1, &rem2 ); - while ( (int64_t) rem1 < 0 ) { - --zSig1; - add128( rem1, rem2, 0, bSig, &rem1, &rem2 ); - } - zSig1 |= ( ( rem1 | rem2 ) != 0 ); - } - return roundAndPackFloatx80(status->floatx80_rounding_precision, - zSign, zExp, zSig0, zSig1, status); -} - -/*---------------------------------------------------------------------------- -| Returns the remainder of the extended double-precision floating-point value -| `a' with respect to the corresponding value `b'. The operation is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_rem(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, zSign; - int32_t aExp, bExp, expDiff; - uint64_t aSig0, aSig1, bSig; - uint64_t q, term0, term1, alternateASig0, alternateASig1; - floatx80 z; - - aSig0 = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - bSig = extractFloatx80Frac( b ); - bExp = extractFloatx80Exp( b ); - if ( aExp == 0x7FFF ) { - if ( (uint64_t) ( aSig0<<1 ) - || ( ( bExp == 0x7FFF ) && (uint64_t) ( bSig<<1 ) ) ) { - return propagateFloatx80NaN(a, b, status); - } - goto invalid; - } - if ( bExp == 0x7FFF ) { - if ((uint64_t)(bSig << 1)) { - return propagateFloatx80NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - if ( bSig == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); - } - if ( aExp == 0 ) { - if ( (uint64_t) ( aSig0<<1 ) == 0 ) return a; - normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 ); - } - bSig |= LIT64( 0x8000000000000000 ); - zSign = aSign; - expDiff = aExp - bExp; - aSig1 = 0; - if ( expDiff < 0 ) { - if ( expDiff < -1 ) return a; - shift128Right( aSig0, 0, 1, &aSig0, &aSig1 ); - expDiff = 0; - } - q = ( bSig <= aSig0 ); - if ( q ) aSig0 -= bSig; - expDiff -= 64; - while ( 0 < expDiff ) { - q = estimateDiv128To64( aSig0, aSig1, bSig ); - q = ( 2 < q ) ? q - 2 : 0; - mul64To128( bSig, q, &term0, &term1 ); - sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 ); - shortShift128Left( aSig0, aSig1, 62, &aSig0, &aSig1 ); - expDiff -= 62; - } - expDiff += 64; - if ( 0 < expDiff ) { - q = estimateDiv128To64( aSig0, aSig1, bSig ); - q = ( 2 < q ) ? q - 2 : 0; - q >>= 64 - expDiff; - mul64To128( bSig, q<<( 64 - expDiff ), &term0, &term1 ); - sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 ); - shortShift128Left( 0, bSig, 64 - expDiff, &term0, &term1 ); - while ( le128( term0, term1, aSig0, aSig1 ) ) { - ++q; - sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 ); - } - } - else { - term1 = 0; - term0 = bSig; - } - sub128( term0, term1, aSig0, aSig1, &alternateASig0, &alternateASig1 ); - if ( lt128( alternateASig0, alternateASig1, aSig0, aSig1 ) - || ( eq128( alternateASig0, alternateASig1, aSig0, aSig1 ) - && ( q & 1 ) ) - ) { - aSig0 = alternateASig0; - aSig1 = alternateASig1; - zSign = ! zSign; - } - return - normalizeRoundAndPackFloatx80( - 80, zSign, bExp + expDiff, aSig0, aSig1, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the square root of the extended double-precision floating-point -| value `a'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 floatx80_sqrt(floatx80 a, float_status *status) -{ - flag aSign; - int32_t aExp, zExp; - uint64_t aSig0, aSig1, zSig0, zSig1, doubleZSig0; - uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3; - floatx80 z; - - aSig0 = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - if ( aExp == 0x7FFF ) { - if ((uint64_t)(aSig0 << 1)) { - return propagateFloatx80NaN(a, a, status); - } - if ( ! aSign ) return a; - goto invalid; - } - if ( aSign ) { - if ( ( aExp | aSig0 ) == 0 ) return a; - invalid: - float_raise(float_flag_invalid, status); - z.low = floatx80_default_nan_low; - z.high = floatx80_default_nan_high; - return z; - } - if ( aExp == 0 ) { - if ( aSig0 == 0 ) return packFloatx80( 0, 0, 0 ); - normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 ); - } - zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFF; - zSig0 = estimateSqrt32( aExp, aSig0>>32 ); - shift128Right( aSig0, 0, 2 + ( aExp & 1 ), &aSig0, &aSig1 ); - zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0<<32 ) + ( zSig0<<30 ); - doubleZSig0 = zSig0<<1; - mul64To128( zSig0, zSig0, &term0, &term1 ); - sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 ); - while ( (int64_t) rem0 < 0 ) { - --zSig0; - doubleZSig0 -= 2; - add128( rem0, rem1, zSig0>>63, doubleZSig0 | 1, &rem0, &rem1 ); - } - zSig1 = estimateDiv128To64( rem1, 0, doubleZSig0 ); - if ( ( zSig1 & LIT64( 0x3FFFFFFFFFFFFFFF ) ) <= 5 ) { - if ( zSig1 == 0 ) zSig1 = 1; - mul64To128( doubleZSig0, zSig1, &term1, &term2 ); - sub128( rem1, 0, term1, term2, &rem1, &rem2 ); - mul64To128( zSig1, zSig1, &term2, &term3 ); - sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 ); - while ( (int64_t) rem1 < 0 ) { - --zSig1; - shortShift128Left( 0, zSig1, 1, &term2, &term3 ); - term3 |= 1; - term2 |= doubleZSig0; - add192( rem1, rem2, rem3, 0, term2, term3, &rem1, &rem2, &rem3 ); - } - zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 ); - } - shortShift128Left( 0, zSig1, 1, &zSig0, &zSig1 ); - zSig0 |= doubleZSig0; - return roundAndPackFloatx80(status->floatx80_rounding_precision, - 0, zExp, zSig0, zSig1, status); -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is equal -| to the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. Otherwise, the comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_eq(floatx80 a, floatx80 b, float_status *status) -{ - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - return - ( a.low == b.low ) - && ( ( a.high == b.high ) - || ( ( a.low == 0 ) - && ( (uint16_t) ( ( a.high | b.high )<<1 ) == 0 ) ) - ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is -| less than or equal to the corresponding value `b', and 0 otherwise. The -| invalid exception is raised if either operand is a NaN. The comparison is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_le(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign != bSign ) { - return - aSign - || ( ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - == 0 ); - } - return - aSign ? le128( b.high, b.low, a.high, a.low ) - : le128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is -| less than the corresponding value `b', and 0 otherwise. The invalid -| exception is raised if either operand is a NaN. The comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_lt(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign != bSign ) { - return - aSign - && ( ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - != 0 ); - } - return - aSign ? lt128( b.high, b.low, a.high, a.low ) - : lt128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point values `a' and `b' -| cannot be compared, and 0 otherwise. The invalid exception is raised if -| either operand is a NaN. The comparison is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -int floatx80_unordered(floatx80 a, floatx80 b, float_status *status) -{ - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - float_raise(float_flag_invalid, status); - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is -| equal to the corresponding value `b', and 0 otherwise. Quiet NaNs do not -| cause an exception. The comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_eq_quiet(floatx80 a, floatx80 b, float_status *status) -{ - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - if ( floatx80_is_signaling_nan( a ) - || floatx80_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - return - ( a.low == b.low ) - && ( ( a.high == b.high ) - || ( ( a.low == 0 ) - && ( (uint16_t) ( ( a.high | b.high )<<1 ) == 0 ) ) - ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is less -| than or equal to the corresponding value `b', and 0 otherwise. Quiet NaNs -| do not cause an exception. Otherwise, the comparison is performed according -| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_le_quiet(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - if ( floatx80_is_signaling_nan( a ) - || floatx80_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign != bSign ) { - return - aSign - || ( ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - == 0 ); - } - return - aSign ? le128( b.high, b.low, a.high, a.low ) - : le128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is less -| than the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause -| an exception. Otherwise, the comparison is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int floatx80_lt_quiet(floatx80 a, floatx80 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - if ( floatx80_is_signaling_nan( a ) - || floatx80_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign != bSign ) { - return - aSign - && ( ( ( (uint16_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - != 0 ); - } - return - aSign ? lt128( b.high, b.low, a.high, a.low ) - : lt128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point values `a' and `b' -| cannot be compared, and 0 otherwise. Quiet NaNs do not cause an exception. -| The comparison is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -int floatx80_unordered_quiet(floatx80 a, floatx80 b, float_status *status) -{ - if ( ( ( extractFloatx80Exp( a ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( a )<<1 ) ) - || ( ( extractFloatx80Exp( b ) == 0x7FFF ) - && (uint64_t) ( extractFloatx80Frac( b )<<1 ) ) - ) { - if ( floatx80_is_signaling_nan( a ) - || floatx80_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the 32-bit two's complement integer format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int32_t float128_to_int32(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig0, aSig1; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( ( aExp == 0x7FFF ) && ( aSig0 | aSig1 ) ) aSign = 0; - if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 ); - aSig0 |= ( aSig1 != 0 ); - shiftCount = 0x4028 - aExp; - if ( 0 < shiftCount ) shift64RightJamming( aSig0, shiftCount, &aSig0 ); - return roundAndPackInt32(aSign, aSig0, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the 32-bit two's complement integer format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. If -| `a' is a NaN, the largest positive integer is returned. Otherwise, if the -| conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int32_t float128_to_int32_round_to_zero(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig0, aSig1, savedASig; - int32_t z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - aSig0 |= ( aSig1 != 0 ); - if ( 0x401E < aExp ) { - if ( ( aExp == 0x7FFF ) && aSig0 ) aSign = 0; - goto invalid; - } - else if ( aExp < 0x3FFF ) { - if (aExp || aSig0) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - aSig0 |= LIT64( 0x0001000000000000 ); - shiftCount = 0x402F - aExp; - savedASig = aSig0; - aSig0 >>= shiftCount; - z = aSig0; - if ( aSign ) z = - z; - if ( ( z < 0 ) ^ aSign ) { - invalid: - float_raise(float_flag_invalid, status); - return aSign ? (int32_t) 0x80000000 : 0x7FFFFFFF; - } - if ( ( aSig0<<shiftCount ) != savedASig ) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the 64-bit two's complement integer format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. Otherwise, if the conversion overflows, the -| largest integer with the same sign as `a' is returned. -*----------------------------------------------------------------------------*/ - -int64_t float128_to_int64(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig0, aSig1; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 ); - shiftCount = 0x402F - aExp; - if ( shiftCount <= 0 ) { - if ( 0x403E < aExp ) { - float_raise(float_flag_invalid, status); - if ( ! aSign - || ( ( aExp == 0x7FFF ) - && ( aSig1 || ( aSig0 != LIT64( 0x0001000000000000 ) ) ) - ) - ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - shortShift128Left( aSig0, aSig1, - shiftCount, &aSig0, &aSig1 ); - } - else { - shift64ExtraRightJamming( aSig0, aSig1, shiftCount, &aSig0, &aSig1 ); - } - return roundAndPackInt64(aSign, aSig0, aSig1, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the 64-bit two's complement integer format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic, except that the conversion is always rounded toward zero. -| If `a' is a NaN, the largest positive integer is returned. Otherwise, if -| the conversion overflows, the largest integer with the same sign as `a' is -| returned. -*----------------------------------------------------------------------------*/ - -int64_t float128_to_int64_round_to_zero(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp, shiftCount; - uint64_t aSig0, aSig1; - int64_t z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp ) aSig0 |= LIT64( 0x0001000000000000 ); - shiftCount = aExp - 0x402F; - if ( 0 < shiftCount ) { - if ( 0x403E <= aExp ) { - aSig0 &= LIT64( 0x0000FFFFFFFFFFFF ); - if ( ( a.high == LIT64( 0xC03E000000000000 ) ) - && ( aSig1 < LIT64( 0x0002000000000000 ) ) ) { - if (aSig1) { - status->float_exception_flags |= float_flag_inexact; - } - } - else { - float_raise(float_flag_invalid, status); - if ( ! aSign || ( ( aExp == 0x7FFF ) && ( aSig0 | aSig1 ) ) ) { - return LIT64( 0x7FFFFFFFFFFFFFFF ); - } - } - return (int64_t) LIT64( 0x8000000000000000 ); - } - z = ( aSig0<<shiftCount ) | ( aSig1>>( ( - shiftCount ) & 63 ) ); - if ( (uint64_t) ( aSig1<<shiftCount ) ) { - status->float_exception_flags |= float_flag_inexact; - } - } - else { - if ( aExp < 0x3FFF ) { - if ( aExp | aSig0 | aSig1 ) { - status->float_exception_flags |= float_flag_inexact; - } - return 0; - } - z = aSig0>>( - shiftCount ); - if ( aSig1 - || ( shiftCount && (uint64_t) ( aSig0<<( shiftCount & 63 ) ) ) ) { - status->float_exception_flags |= float_flag_inexact; - } - } - if ( aSign ) z = - z; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the single-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float32 float128_to_float32(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig0, aSig1; - uint32_t zSig; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 ) { - return commonNaNToFloat32(float128ToCommonNaN(a, status), status); - } - return packFloat32( aSign, 0xFF, 0 ); - } - aSig0 |= ( aSig1 != 0 ); - shift64RightJamming( aSig0, 18, &aSig0 ); - zSig = aSig0; - if ( aExp || zSig ) { - zSig |= 0x40000000; - aExp -= 0x3F81; - } - return roundAndPackFloat32(aSign, aExp, zSig, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the double-precision floating-point format. The conversion -| is performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic. -*----------------------------------------------------------------------------*/ - -float64 float128_to_float64(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig0, aSig1; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 ) { - return commonNaNToFloat64(float128ToCommonNaN(a, status), status); - } - return packFloat64( aSign, 0x7FF, 0 ); - } - shortShift128Left( aSig0, aSig1, 14, &aSig0, &aSig1 ); - aSig0 |= ( aSig1 != 0 ); - if ( aExp || aSig0 ) { - aSig0 |= LIT64( 0x4000000000000000 ); - aExp -= 0x3C01; - } - return roundAndPackFloat64(aSign, aExp, aSig0, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point -| value `a' to the extended double-precision floating-point format. The -| conversion is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -floatx80 float128_to_floatx80(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig0, aSig1; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 ) { - return commonNaNToFloatx80(float128ToCommonNaN(a, status), status); - } - return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); - } - if ( aExp == 0 ) { - if ( ( aSig0 | aSig1 ) == 0 ) return packFloatx80( aSign, 0, 0 ); - normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 ); - } - else { - aSig0 |= LIT64( 0x0001000000000000 ); - } - shortShift128Left( aSig0, aSig1, 15, &aSig0, &aSig1 ); - return roundAndPackFloatx80(80, aSign, aExp, aSig0, aSig1, status); - -} - -/*---------------------------------------------------------------------------- -| Rounds the quadruple-precision floating-point value `a' to an integer, and -| returns the result as a quadruple-precision floating-point value. The -| operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_round_to_int(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t lastBitMask, roundBitsMask; - float128 z; - - aExp = extractFloat128Exp( a ); - if ( 0x402F <= aExp ) { - if ( 0x406F <= aExp ) { - if ( ( aExp == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) - ) { - return propagateFloat128NaN(a, a, status); - } - return a; - } - lastBitMask = 1; - lastBitMask = ( lastBitMask<<( 0x406E - aExp ) )<<1; - roundBitsMask = lastBitMask - 1; - z = a; - switch (status->float_rounding_mode) { - case float_round_nearest_even: - if ( lastBitMask ) { - add128( z.high, z.low, 0, lastBitMask>>1, &z.high, &z.low ); - if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask; - } - else { - if ( (int64_t) z.low < 0 ) { - ++z.high; - if ( (uint64_t) ( z.low<<1 ) == 0 ) z.high &= ~1; - } - } - break; - case float_round_ties_away: - if (lastBitMask) { - add128(z.high, z.low, 0, lastBitMask >> 1, &z.high, &z.low); - } else { - if ((int64_t) z.low < 0) { - ++z.high; - } - } - break; - case float_round_to_zero: - break; - case float_round_up: - if (!extractFloat128Sign(z)) { - add128(z.high, z.low, 0, roundBitsMask, &z.high, &z.low); - } - break; - case float_round_down: - if (extractFloat128Sign(z)) { - add128(z.high, z.low, 0, roundBitsMask, &z.high, &z.low); - } - break; - default: - abort(); - } - z.low &= ~ roundBitsMask; - } - else { - if ( aExp < 0x3FFF ) { - if ( ( ( (uint64_t) ( a.high<<1 ) ) | a.low ) == 0 ) return a; - status->float_exception_flags |= float_flag_inexact; - aSign = extractFloat128Sign( a ); - switch (status->float_rounding_mode) { - case float_round_nearest_even: - if ( ( aExp == 0x3FFE ) - && ( extractFloat128Frac0( a ) - | extractFloat128Frac1( a ) ) - ) { - return packFloat128( aSign, 0x3FFF, 0, 0 ); - } - break; - case float_round_ties_away: - if (aExp == 0x3FFE) { - return packFloat128(aSign, 0x3FFF, 0, 0); - } - break; - case float_round_down: - return - aSign ? packFloat128( 1, 0x3FFF, 0, 0 ) - : packFloat128( 0, 0, 0, 0 ); - case float_round_up: - return - aSign ? packFloat128( 1, 0, 0, 0 ) - : packFloat128( 0, 0x3FFF, 0, 0 ); - } - return packFloat128( aSign, 0, 0, 0 ); - } - lastBitMask = 1; - lastBitMask <<= 0x402F - aExp; - roundBitsMask = lastBitMask - 1; - z.low = 0; - z.high = a.high; - switch (status->float_rounding_mode) { - case float_round_nearest_even: - z.high += lastBitMask>>1; - if ( ( ( z.high & roundBitsMask ) | a.low ) == 0 ) { - z.high &= ~ lastBitMask; - } - break; - case float_round_ties_away: - z.high += lastBitMask>>1; - break; - case float_round_to_zero: - break; - case float_round_up: - if (!extractFloat128Sign(z)) { - z.high |= ( a.low != 0 ); - z.high += roundBitsMask; - } - break; - case float_round_down: - if (extractFloat128Sign(z)) { - z.high |= (a.low != 0); - z.high += roundBitsMask; - } - break; - default: - abort(); - } - z.high &= ~ roundBitsMask; - } - if ( ( z.low != a.low ) || ( z.high != a.high ) ) { - status->float_exception_flags |= float_flag_inexact; - } - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the quadruple-precision -| floating-point values `a' and `b'. If `zSign' is 1, the sum is negated -| before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float128 addFloat128Sigs(float128 a, float128 b, flag zSign, - float_status *status) -{ - int32_t aExp, bExp, zExp; - uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2; - int32_t expDiff; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - bSig1 = extractFloat128Frac1( b ); - bSig0 = extractFloat128Frac0( b ); - bExp = extractFloat128Exp( b ); - expDiff = aExp - bExp; - if ( 0 < expDiff ) { - if ( aExp == 0x7FFF ) { - if (aSig0 | aSig1) { - return propagateFloat128NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig0 |= LIT64( 0x0001000000000000 ); - } - shift128ExtraRightJamming( - bSig0, bSig1, 0, expDiff, &bSig0, &bSig1, &zSig2 ); - zExp = aExp; - } - else if ( expDiff < 0 ) { - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig0 |= LIT64( 0x0001000000000000 ); - } - shift128ExtraRightJamming( - aSig0, aSig1, 0, - expDiff, &aSig0, &aSig1, &zSig2 ); - zExp = bExp; - } - else { - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 | bSig0 | bSig1 ) { - return propagateFloat128NaN(a, b, status); - } - return a; - } - add128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 ); - if ( aExp == 0 ) { - if (status->flush_to_zero) { - if (zSig0 | zSig1) { - float_raise(float_flag_output_denormal, status); - } - return packFloat128(zSign, 0, 0, 0); - } - return packFloat128( zSign, 0, zSig0, zSig1 ); - } - zSig2 = 0; - zSig0 |= LIT64( 0x0002000000000000 ); - zExp = aExp; - goto shiftRight1; - } - aSig0 |= LIT64( 0x0001000000000000 ); - add128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 ); - --zExp; - if ( zSig0 < LIT64( 0x0002000000000000 ) ) goto roundAndPack; - ++zExp; - shiftRight1: - shift128ExtraRightJamming( - zSig0, zSig1, zSig2, 1, &zSig0, &zSig1, &zSig2 ); - roundAndPack: - return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the quadruple- -| precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -static float128 subFloat128Sigs(float128 a, float128 b, flag zSign, - float_status *status) -{ - int32_t aExp, bExp, zExp; - uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1; - int32_t expDiff; - float128 z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - bSig1 = extractFloat128Frac1( b ); - bSig0 = extractFloat128Frac0( b ); - bExp = extractFloat128Exp( b ); - expDiff = aExp - bExp; - shortShift128Left( aSig0, aSig1, 14, &aSig0, &aSig1 ); - shortShift128Left( bSig0, bSig1, 14, &bSig0, &bSig1 ); - if ( 0 < expDiff ) goto aExpBigger; - if ( expDiff < 0 ) goto bExpBigger; - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 | bSig0 | bSig1 ) { - return propagateFloat128NaN(a, b, status); - } - float_raise(float_flag_invalid, status); - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - if ( aExp == 0 ) { - aExp = 1; - bExp = 1; - } - if ( bSig0 < aSig0 ) goto aBigger; - if ( aSig0 < bSig0 ) goto bBigger; - if ( bSig1 < aSig1 ) goto aBigger; - if ( aSig1 < bSig1 ) goto bBigger; - return packFloat128(status->float_rounding_mode == float_round_down, - 0, 0, 0); - bExpBigger: - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - return packFloat128( zSign ^ 1, 0x7FFF, 0, 0 ); - } - if ( aExp == 0 ) { - ++expDiff; - } - else { - aSig0 |= LIT64( 0x4000000000000000 ); - } - shift128RightJamming( aSig0, aSig1, - expDiff, &aSig0, &aSig1 ); - bSig0 |= LIT64( 0x4000000000000000 ); - bBigger: - sub128( bSig0, bSig1, aSig0, aSig1, &zSig0, &zSig1 ); - zExp = bExp; - zSign ^= 1; - goto normalizeRoundAndPack; - aExpBigger: - if ( aExp == 0x7FFF ) { - if (aSig0 | aSig1) { - return propagateFloat128NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - --expDiff; - } - else { - bSig0 |= LIT64( 0x4000000000000000 ); - } - shift128RightJamming( bSig0, bSig1, expDiff, &bSig0, &bSig1 ); - aSig0 |= LIT64( 0x4000000000000000 ); - aBigger: - sub128( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1 ); - zExp = aExp; - normalizeRoundAndPack: - --zExp; - return normalizeRoundAndPackFloat128(zSign, zExp - 14, zSig0, zSig1, - status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of adding the quadruple-precision floating-point values -| `a' and `b'. The operation is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_add(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign == bSign ) { - return addFloat128Sigs(a, b, aSign, status); - } - else { - return subFloat128Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the quadruple-precision floating-point -| values `a' and `b'. The operation is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_sub(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign == bSign ) { - return subFloat128Sigs(a, b, aSign, status); - } - else { - return addFloat128Sigs(a, b, aSign, status); - } - -} - -/*---------------------------------------------------------------------------- -| Returns the result of multiplying the quadruple-precision floating-point -| values `a' and `b'. The operation is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_mul(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign, zSign; - int32_t aExp, bExp, zExp; - uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2, zSig3; - float128 z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - bSig1 = extractFloat128Frac1( b ); - bSig0 = extractFloat128Frac0( b ); - bExp = extractFloat128Exp( b ); - bSign = extractFloat128Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FFF ) { - if ( ( aSig0 | aSig1 ) - || ( ( bExp == 0x7FFF ) && ( bSig0 | bSig1 ) ) ) { - return propagateFloat128NaN(a, b, status); - } - if ( ( bExp | bSig0 | bSig1 ) == 0 ) goto invalid; - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - if ( ( aExp | aSig0 | aSig1 ) == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - if ( aExp == 0 ) { - if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 ); - normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 ); - } - if ( bExp == 0 ) { - if ( ( bSig0 | bSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 ); - normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 ); - } - zExp = aExp + bExp - 0x4000; - aSig0 |= LIT64( 0x0001000000000000 ); - shortShift128Left( bSig0, bSig1, 16, &bSig0, &bSig1 ); - mul128To256( aSig0, aSig1, bSig0, bSig1, &zSig0, &zSig1, &zSig2, &zSig3 ); - add128( zSig0, zSig1, aSig0, aSig1, &zSig0, &zSig1 ); - zSig2 |= ( zSig3 != 0 ); - if ( LIT64( 0x0002000000000000 ) <= zSig0 ) { - shift128ExtraRightJamming( - zSig0, zSig1, zSig2, 1, &zSig0, &zSig1, &zSig2 ); - ++zExp; - } - return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of dividing the quadruple-precision floating-point value -| `a' by the corresponding value `b'. The operation is performed according to -| the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_div(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign, zSign; - int32_t aExp, bExp, zExp; - uint64_t aSig0, aSig1, bSig0, bSig1, zSig0, zSig1, zSig2; - uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3; - float128 z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - bSig1 = extractFloat128Frac1( b ); - bSig0 = extractFloat128Frac0( b ); - bExp = extractFloat128Exp( b ); - bSign = extractFloat128Sign( b ); - zSign = aSign ^ bSign; - if ( aExp == 0x7FFF ) { - if (aSig0 | aSig1) { - return propagateFloat128NaN(a, b, status); - } - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - goto invalid; - } - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - return packFloat128( zSign, 0, 0, 0 ); - } - if ( bExp == 0 ) { - if ( ( bSig0 | bSig1 ) == 0 ) { - if ( ( aExp | aSig0 | aSig1 ) == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - float_raise(float_flag_divbyzero, status); - return packFloat128( zSign, 0x7FFF, 0, 0 ); - } - normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 ); - } - if ( aExp == 0 ) { - if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( zSign, 0, 0, 0 ); - normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 ); - } - zExp = aExp - bExp + 0x3FFD; - shortShift128Left( - aSig0 | LIT64( 0x0001000000000000 ), aSig1, 15, &aSig0, &aSig1 ); - shortShift128Left( - bSig0 | LIT64( 0x0001000000000000 ), bSig1, 15, &bSig0, &bSig1 ); - if ( le128( bSig0, bSig1, aSig0, aSig1 ) ) { - shift128Right( aSig0, aSig1, 1, &aSig0, &aSig1 ); - ++zExp; - } - zSig0 = estimateDiv128To64( aSig0, aSig1, bSig0 ); - mul128By64To192( bSig0, bSig1, zSig0, &term0, &term1, &term2 ); - sub192( aSig0, aSig1, 0, term0, term1, term2, &rem0, &rem1, &rem2 ); - while ( (int64_t) rem0 < 0 ) { - --zSig0; - add192( rem0, rem1, rem2, 0, bSig0, bSig1, &rem0, &rem1, &rem2 ); - } - zSig1 = estimateDiv128To64( rem1, rem2, bSig0 ); - if ( ( zSig1 & 0x3FFF ) <= 4 ) { - mul128By64To192( bSig0, bSig1, zSig1, &term1, &term2, &term3 ); - sub192( rem1, rem2, 0, term1, term2, term3, &rem1, &rem2, &rem3 ); - while ( (int64_t) rem1 < 0 ) { - --zSig1; - add192( rem1, rem2, rem3, 0, bSig0, bSig1, &rem1, &rem2, &rem3 ); - } - zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 ); - } - shift128ExtraRightJamming( zSig0, zSig1, 0, 15, &zSig0, &zSig1, &zSig2 ); - return roundAndPackFloat128(zSign, zExp, zSig0, zSig1, zSig2, status); - -} - -/*---------------------------------------------------------------------------- -| Returns the remainder of the quadruple-precision floating-point value `a' -| with respect to the corresponding value `b'. The operation is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_rem(float128 a, float128 b, float_status *status) -{ - flag aSign, zSign; - int32_t aExp, bExp, expDiff; - uint64_t aSig0, aSig1, bSig0, bSig1, q, term0, term1, term2; - uint64_t allZero, alternateASig0, alternateASig1, sigMean1; - int64_t sigMean0; - float128 z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - bSig1 = extractFloat128Frac1( b ); - bSig0 = extractFloat128Frac0( b ); - bExp = extractFloat128Exp( b ); - if ( aExp == 0x7FFF ) { - if ( ( aSig0 | aSig1 ) - || ( ( bExp == 0x7FFF ) && ( bSig0 | bSig1 ) ) ) { - return propagateFloat128NaN(a, b, status); - } - goto invalid; - } - if ( bExp == 0x7FFF ) { - if (bSig0 | bSig1) { - return propagateFloat128NaN(a, b, status); - } - return a; - } - if ( bExp == 0 ) { - if ( ( bSig0 | bSig1 ) == 0 ) { - invalid: - float_raise(float_flag_invalid, status); - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - normalizeFloat128Subnormal( bSig0, bSig1, &bExp, &bSig0, &bSig1 ); - } - if ( aExp == 0 ) { - if ( ( aSig0 | aSig1 ) == 0 ) return a; - normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 ); - } - expDiff = aExp - bExp; - if ( expDiff < -1 ) return a; - shortShift128Left( - aSig0 | LIT64( 0x0001000000000000 ), - aSig1, - 15 - ( expDiff < 0 ), - &aSig0, - &aSig1 - ); - shortShift128Left( - bSig0 | LIT64( 0x0001000000000000 ), bSig1, 15, &bSig0, &bSig1 ); - q = le128( bSig0, bSig1, aSig0, aSig1 ); - if ( q ) sub128( aSig0, aSig1, bSig0, bSig1, &aSig0, &aSig1 ); - expDiff -= 64; - while ( 0 < expDiff ) { - q = estimateDiv128To64( aSig0, aSig1, bSig0 ); - q = ( 4 < q ) ? q - 4 : 0; - mul128By64To192( bSig0, bSig1, q, &term0, &term1, &term2 ); - shortShift192Left( term0, term1, term2, 61, &term1, &term2, &allZero ); - shortShift128Left( aSig0, aSig1, 61, &aSig0, &allZero ); - sub128( aSig0, 0, term1, term2, &aSig0, &aSig1 ); - expDiff -= 61; - } - if ( -64 < expDiff ) { - q = estimateDiv128To64( aSig0, aSig1, bSig0 ); - q = ( 4 < q ) ? q - 4 : 0; - q >>= - expDiff; - shift128Right( bSig0, bSig1, 12, &bSig0, &bSig1 ); - expDiff += 52; - if ( expDiff < 0 ) { - shift128Right( aSig0, aSig1, - expDiff, &aSig0, &aSig1 ); - } - else { - shortShift128Left( aSig0, aSig1, expDiff, &aSig0, &aSig1 ); - } - mul128By64To192( bSig0, bSig1, q, &term0, &term1, &term2 ); - sub128( aSig0, aSig1, term1, term2, &aSig0, &aSig1 ); - } - else { - shift128Right( aSig0, aSig1, 12, &aSig0, &aSig1 ); - shift128Right( bSig0, bSig1, 12, &bSig0, &bSig1 ); - } - do { - alternateASig0 = aSig0; - alternateASig1 = aSig1; - ++q; - sub128( aSig0, aSig1, bSig0, bSig1, &aSig0, &aSig1 ); - } while ( 0 <= (int64_t) aSig0 ); - add128( - aSig0, aSig1, alternateASig0, alternateASig1, (uint64_t *)&sigMean0, &sigMean1 ); - if ( ( sigMean0 < 0 ) - || ( ( ( sigMean0 | sigMean1 ) == 0 ) && ( q & 1 ) ) ) { - aSig0 = alternateASig0; - aSig1 = alternateASig1; - } - zSign = ( (int64_t) aSig0 < 0 ); - if ( zSign ) sub128( 0, 0, aSig0, aSig1, &aSig0, &aSig1 ); - return normalizeRoundAndPackFloat128(aSign ^ zSign, bExp - 4, aSig0, aSig1, - status); -} - -/*---------------------------------------------------------------------------- -| Returns the square root of the quadruple-precision floating-point value `a'. -| The operation is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -float128 float128_sqrt(float128 a, float_status *status) -{ - flag aSign; - int32_t aExp, zExp; - uint64_t aSig0, aSig1, zSig0, zSig1, zSig2, doubleZSig0; - uint64_t rem0, rem1, rem2, rem3, term0, term1, term2, term3; - float128 z; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp == 0x7FFF ) { - if (aSig0 | aSig1) { - return propagateFloat128NaN(a, a, status); - } - if ( ! aSign ) return a; - goto invalid; - } - if ( aSign ) { - if ( ( aExp | aSig0 | aSig1 ) == 0 ) return a; - invalid: - float_raise(float_flag_invalid, status); - z.low = float128_default_nan_low; - z.high = float128_default_nan_high; - return z; - } - if ( aExp == 0 ) { - if ( ( aSig0 | aSig1 ) == 0 ) return packFloat128( 0, 0, 0, 0 ); - normalizeFloat128Subnormal( aSig0, aSig1, &aExp, &aSig0, &aSig1 ); - } - zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFE; - aSig0 |= LIT64( 0x0001000000000000 ); - zSig0 = estimateSqrt32( aExp, aSig0>>17 ); - shortShift128Left( aSig0, aSig1, 13 - ( aExp & 1 ), &aSig0, &aSig1 ); - zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0<<32 ) + ( zSig0<<30 ); - doubleZSig0 = zSig0<<1; - mul64To128( zSig0, zSig0, &term0, &term1 ); - sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 ); - while ( (int64_t) rem0 < 0 ) { - --zSig0; - doubleZSig0 -= 2; - add128( rem0, rem1, zSig0>>63, doubleZSig0 | 1, &rem0, &rem1 ); - } - zSig1 = estimateDiv128To64( rem1, 0, doubleZSig0 ); - if ( ( zSig1 & 0x1FFF ) <= 5 ) { - if ( zSig1 == 0 ) zSig1 = 1; - mul64To128( doubleZSig0, zSig1, &term1, &term2 ); - sub128( rem1, 0, term1, term2, &rem1, &rem2 ); - mul64To128( zSig1, zSig1, &term2, &term3 ); - sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 ); - while ( (int64_t) rem1 < 0 ) { - --zSig1; - shortShift128Left( 0, zSig1, 1, &term2, &term3 ); - term3 |= 1; - term2 |= doubleZSig0; - add192( rem1, rem2, rem3, 0, term2, term3, &rem1, &rem2, &rem3 ); - } - zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 ); - } - shift128ExtraRightJamming( zSig0, zSig1, 0, 14, &zSig0, &zSig1, &zSig2 ); - return roundAndPackFloat128(0, zExp, zSig0, zSig1, zSig2, status); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is equal to -| the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. Otherwise, the comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_eq(float128 a, float128 b, float_status *status) -{ - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - return - ( a.low == b.low ) - && ( ( a.high == b.high ) - || ( ( a.low == 0 ) - && ( (uint64_t) ( ( a.high | b.high )<<1 ) == 0 ) ) - ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is less than -| or equal to the corresponding value `b', and 0 otherwise. The invalid -| exception is raised if either operand is a NaN. The comparison is performed -| according to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_le(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign != bSign ) { - return - aSign - || ( ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - == 0 ); - } - return - aSign ? le128( b.high, b.low, a.high, a.low ) - : le128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. The invalid exception is -| raised if either operand is a NaN. The comparison is performed according -| to the IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_lt(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - float_raise(float_flag_invalid, status); - return 0; - } - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign != bSign ) { - return - aSign - && ( ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - != 0 ); - } - return - aSign ? lt128( b.high, b.low, a.high, a.low ) - : lt128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. The invalid exception is raised if either -| operand is a NaN. The comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_unordered(float128 a, float128 b, float_status *status) -{ - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - float_raise(float_flag_invalid, status); - return 1; - } - return 0; -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is equal to -| the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception. The comparison is performed according to the IEC/IEEE Standard -| for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_eq_quiet(float128 a, float128 b, float_status *status) -{ - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - if ( float128_is_signaling_nan( a ) - || float128_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - return - ( a.low == b.low ) - && ( ( a.high == b.high ) - || ( ( a.low == 0 ) - && ( (uint64_t) ( ( a.high | b.high )<<1 ) == 0 ) ) - ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is less than -| or equal to the corresponding value `b', and 0 otherwise. Quiet NaNs do not -| cause an exception. Otherwise, the comparison is performed according to the -| IEC/IEEE Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_le_quiet(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - if ( float128_is_signaling_nan( a ) - || float128_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign != bSign ) { - return - aSign - || ( ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - == 0 ); - } - return - aSign ? le128( b.high, b.low, a.high, a.low ) - : le128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is less than -| the corresponding value `b', and 0 otherwise. Quiet NaNs do not cause an -| exception. Otherwise, the comparison is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_lt_quiet(float128 a, float128 b, float_status *status) -{ - flag aSign, bSign; - - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - if ( float128_is_signaling_nan( a ) - || float128_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 0; - } - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign != bSign ) { - return - aSign - && ( ( ( (uint64_t) ( ( a.high | b.high )<<1 ) ) | a.low | b.low ) - != 0 ); - } - return - aSign ? lt128( b.high, b.low, a.high, a.low ) - : lt128( a.high, a.low, b.high, b.low ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point values `a' and `b' cannot -| be compared, and 0 otherwise. Quiet NaNs do not cause an exception. The -| comparison is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ - -int float128_unordered_quiet(float128 a, float128 b, float_status *status) -{ - if ( ( ( extractFloat128Exp( a ) == 0x7FFF ) - && ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) - || ( ( extractFloat128Exp( b ) == 0x7FFF ) - && ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) ) - ) { - if ( float128_is_signaling_nan( a ) - || float128_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return 1; - } - return 0; -} - -/* misc functions */ -float32 uint32_to_float32(uint32_t a, float_status *status) -{ - return int64_to_float32(a, status); -} - -float64 uint32_to_float64(uint32_t a, float_status *status) -{ - return int64_to_float64(a, status); -} - -uint32_t float32_to_uint32(float32 a, float_status *status) -{ - int64_t v; - uint32_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float32_to_int64(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffffffff) { - res = 0xffffffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint32_t float32_to_uint32_round_to_zero(float32 a, float_status *status) -{ - int64_t v; - uint32_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float32_to_int64_round_to_zero(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffffffff) { - res = 0xffffffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -int16_t float32_to_int16(float32 a, float_status *status) -{ - int32_t v; - int16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float32_to_int32(a, status); - if (v < -0x8000) { - res = -0x8000; - } else if (v > 0x7fff) { - res = 0x7fff; - } else { - return v; - } - - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint16_t float32_to_uint16(float32 a, float_status *status) -{ - int32_t v; - uint16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float32_to_int32(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffff) { - res = 0xffff; - } else { - return v; - } - - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint16_t float32_to_uint16_round_to_zero(float32 a, float_status *status) -{ - int64_t v; - uint16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float32_to_int64_round_to_zero(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffff) { - res = 0xffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint32_t float64_to_uint32(float64 a, float_status *status) -{ - uint64_t v; - uint32_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float64_to_uint64(a, status); - if (v > 0xffffffff) { - res = 0xffffffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint32_t float64_to_uint32_round_to_zero(float64 a, float_status *status) -{ - uint64_t v; - uint32_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float64_to_uint64_round_to_zero(a, status); - if (v > 0xffffffff) { - res = 0xffffffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -int16_t float64_to_int16(float64 a, float_status *status) -{ - int64_t v; - int16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float64_to_int32(a, status); - if (v < -0x8000) { - res = -0x8000; - } else if (v > 0x7fff) { - res = 0x7fff; - } else { - return v; - } - - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint16_t float64_to_uint16(float64 a, float_status *status) -{ - int64_t v; - uint16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float64_to_int32(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffff) { - res = 0xffff; - } else { - return v; - } - - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -uint16_t float64_to_uint16_round_to_zero(float64 a, float_status *status) -{ - int64_t v; - uint16_t res; - int old_exc_flags = get_float_exception_flags(status); - - v = float64_to_int64_round_to_zero(a, status); - if (v < 0) { - res = 0; - } else if (v > 0xffff) { - res = 0xffff; - } else { - return v; - } - set_float_exception_flags(old_exc_flags, status); - float_raise(float_flag_invalid, status); - return res; -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point value -| `a' to the 64-bit unsigned integer format. The conversion is -| performed according to the IEC/IEEE Standard for Binary Floating-Point -| Arithmetic---which means in particular that the conversion is rounded -| according to the current rounding mode. If `a' is a NaN, the largest -| positive integer is returned. If the conversion overflows, the -| largest unsigned integer is returned. If 'a' is negative, the value is -| rounded and zero is returned; negative values that do not round to zero -| will raise the inexact exception. -*----------------------------------------------------------------------------*/ - -uint64_t float64_to_uint64(float64 a, float_status *status) -{ - flag aSign; - int aExp; - int shiftCount; - uint64_t aSig, aSigExtra; - a = float64_squash_input_denormal(a, status); - - aSig = extractFloat64Frac(a); - aExp = extractFloat64Exp(a); - aSign = extractFloat64Sign(a); - if (aSign && (aExp > 1022)) { - float_raise(float_flag_invalid, status); - if (float64_is_any_nan(a)) { - return LIT64(0xFFFFFFFFFFFFFFFF); - } else { - return 0; - } - } - if (aExp) { - aSig |= LIT64(0x0010000000000000); - } - shiftCount = 0x433 - aExp; - if (shiftCount <= 0) { - if (0x43E < aExp) { - float_raise(float_flag_invalid, status); - return LIT64(0xFFFFFFFFFFFFFFFF); - } - aSigExtra = 0; - aSig <<= -shiftCount; - } else { - shift64ExtraRightJamming(aSig, 0, shiftCount, &aSig, &aSigExtra); - } - return roundAndPackUint64(aSign, aSig, aSigExtra, status); -} - -uint64_t float64_to_uint64_round_to_zero(float64 a, float_status *status) -{ - signed char current_rounding_mode = status->float_rounding_mode; - set_float_rounding_mode(float_round_to_zero, status); - int64_t v = float64_to_uint64(a, status); - set_float_rounding_mode(current_rounding_mode, status); - return v; -} - -#define COMPARE(s, nan_exp) \ -static inline int float ## s ## _compare_internal(float ## s a, float ## s b,\ - int is_quiet, float_status *status) \ -{ \ - flag aSign, bSign; \ - uint ## s ## _t av, bv; \ - a = float ## s ## _squash_input_denormal(a, status); \ - b = float ## s ## _squash_input_denormal(b, status); \ - \ - if (( ( extractFloat ## s ## Exp( a ) == nan_exp ) && \ - extractFloat ## s ## Frac( a ) ) || \ - ( ( extractFloat ## s ## Exp( b ) == nan_exp ) && \ - extractFloat ## s ## Frac( b ) )) { \ - if (!is_quiet || \ - float ## s ## _is_signaling_nan( a ) || \ - float ## s ## _is_signaling_nan( b ) ) { \ - float_raise(float_flag_invalid, status); \ - } \ - return float_relation_unordered; \ - } \ - aSign = extractFloat ## s ## Sign( a ); \ - bSign = extractFloat ## s ## Sign( b ); \ - av = float ## s ## _val(a); \ - bv = float ## s ## _val(b); \ - if ( aSign != bSign ) { \ - if ( (uint ## s ## _t) ( ( av | bv )<<1 ) == 0 ) { \ - /* zero case */ \ - return float_relation_equal; \ - } else { \ - return 1 - (2 * aSign); \ - } \ - } else { \ - if (av == bv) { \ - return float_relation_equal; \ - } else { \ - return 1 - 2 * (aSign ^ ( av < bv )); \ - } \ - } \ -} \ - \ -int float ## s ## _compare(float ## s a, float ## s b, float_status *status) \ -{ \ - return float ## s ## _compare_internal(a, b, 0, status); \ -} \ - \ -int float ## s ## _compare_quiet(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _compare_internal(a, b, 1, status); \ -} - -COMPARE(32, 0xff) -COMPARE(64, 0x7ff) - -static inline int floatx80_compare_internal(floatx80 a, floatx80 b, - int is_quiet, float_status *status) -{ - flag aSign, bSign; - - if (( ( extractFloatx80Exp( a ) == 0x7fff ) && - ( extractFloatx80Frac( a )<<1 ) ) || - ( ( extractFloatx80Exp( b ) == 0x7fff ) && - ( extractFloatx80Frac( b )<<1 ) )) { - if (!is_quiet || - floatx80_is_signaling_nan( a ) || - floatx80_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return float_relation_unordered; - } - aSign = extractFloatx80Sign( a ); - bSign = extractFloatx80Sign( b ); - if ( aSign != bSign ) { - - if ( ( ( (uint16_t) ( ( a.high | b.high ) << 1 ) ) == 0) && - ( ( a.low | b.low ) == 0 ) ) { - /* zero case */ - return float_relation_equal; - } else { - return 1 - (2 * aSign); - } - } else { - if (a.low == b.low && a.high == b.high) { - return float_relation_equal; - } else { - return 1 - 2 * (aSign ^ ( lt128( a.high, a.low, b.high, b.low ) )); - } - } -} - -int floatx80_compare(floatx80 a, floatx80 b, float_status *status) -{ - return floatx80_compare_internal(a, b, 0, status); -} - -int floatx80_compare_quiet(floatx80 a, floatx80 b, float_status *status) -{ - return floatx80_compare_internal(a, b, 1, status); -} - -static inline int float128_compare_internal(float128 a, float128 b, - int is_quiet, float_status *status) -{ - flag aSign, bSign; - - if (( ( extractFloat128Exp( a ) == 0x7fff ) && - ( extractFloat128Frac0( a ) | extractFloat128Frac1( a ) ) ) || - ( ( extractFloat128Exp( b ) == 0x7fff ) && - ( extractFloat128Frac0( b ) | extractFloat128Frac1( b ) ) )) { - if (!is_quiet || - float128_is_signaling_nan( a ) || - float128_is_signaling_nan( b ) ) { - float_raise(float_flag_invalid, status); - } - return float_relation_unordered; - } - aSign = extractFloat128Sign( a ); - bSign = extractFloat128Sign( b ); - if ( aSign != bSign ) { - if ( ( ( ( a.high | b.high )<<1 ) | a.low | b.low ) == 0 ) { - /* zero case */ - return float_relation_equal; - } else { - return 1 - (2 * aSign); - } - } else { - if (a.low == b.low && a.high == b.high) { - return float_relation_equal; - } else { - return 1 - 2 * (aSign ^ ( lt128( a.high, a.low, b.high, b.low ) )); - } - } -} - -int float128_compare(float128 a, float128 b, float_status *status) -{ - return float128_compare_internal(a, b, 0, status); -} - -int float128_compare_quiet(float128 a, float128 b, float_status *status) -{ - return float128_compare_internal(a, b, 1, status); -} - -/* min() and max() functions. These can't be implemented as - * 'compare and pick one input' because that would mishandle - * NaNs and +0 vs -0. - * - * minnum() and maxnum() functions. These are similar to the min() - * and max() functions but if one of the arguments is a QNaN and - * the other is numerical then the numerical argument is returned. - * minnum() and maxnum correspond to the IEEE 754-2008 minNum() - * and maxNum() operations. min() and max() are the typical min/max - * semantics provided by many CPUs which predate that specification. - * - * minnummag() and maxnummag() functions correspond to minNumMag() - * and minNumMag() from the IEEE-754 2008. - */ -#define MINMAX(s) \ -static inline float ## s float ## s ## _minmax(float ## s a, float ## s b, \ - int ismin, int isieee, \ - int ismag, \ - float_status *status) \ -{ \ - flag aSign, bSign; \ - uint ## s ## _t av, bv, aav, abv; \ - a = float ## s ## _squash_input_denormal(a, status); \ - b = float ## s ## _squash_input_denormal(b, status); \ - if (float ## s ## _is_any_nan(a) || \ - float ## s ## _is_any_nan(b)) { \ - if (isieee) { \ - if (float ## s ## _is_quiet_nan(a) && \ - !float ## s ##_is_any_nan(b)) { \ - return b; \ - } else if (float ## s ## _is_quiet_nan(b) && \ - !float ## s ## _is_any_nan(a)) { \ - return a; \ - } \ - } \ - return propagateFloat ## s ## NaN(a, b, status); \ - } \ - aSign = extractFloat ## s ## Sign(a); \ - bSign = extractFloat ## s ## Sign(b); \ - av = float ## s ## _val(a); \ - bv = float ## s ## _val(b); \ - if (ismag) { \ - aav = float ## s ## _abs(av); \ - abv = float ## s ## _abs(bv); \ - if (aav != abv) { \ - if (ismin) { \ - return (aav < abv) ? a : b; \ - } else { \ - return (aav < abv) ? b : a; \ - } \ - } \ - } \ - if (aSign != bSign) { \ - if (ismin) { \ - return aSign ? a : b; \ - } else { \ - return aSign ? b : a; \ - } \ - } else { \ - if (ismin) { \ - return (aSign ^ (av < bv)) ? a : b; \ - } else { \ - return (aSign ^ (av < bv)) ? b : a; \ - } \ - } \ -} \ - \ -float ## s float ## s ## _min(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 1, 0, 0, status); \ -} \ - \ -float ## s float ## s ## _max(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 0, 0, 0, status); \ -} \ - \ -float ## s float ## s ## _minnum(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 1, 1, 0, status); \ -} \ - \ -float ## s float ## s ## _maxnum(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 0, 1, 0, status); \ -} \ - \ -float ## s float ## s ## _minnummag(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 1, 1, 1, status); \ -} \ - \ -float ## s float ## s ## _maxnummag(float ## s a, float ## s b, \ - float_status *status) \ -{ \ - return float ## s ## _minmax(a, b, 0, 1, 1, status); \ -} - -MINMAX(32) -MINMAX(64) - - -/* Multiply A by 2 raised to the power N. */ -float32 float32_scalbn(float32 a, int n, float_status *status) -{ - flag aSign; - int16_t aExp; - uint32_t aSig; - - a = float32_squash_input_denormal(a, status); - aSig = extractFloat32Frac( a ); - aExp = extractFloat32Exp( a ); - aSign = extractFloat32Sign( a ); - - if ( aExp == 0xFF ) { - if ( aSig ) { - return propagateFloat32NaN(a, a, status); - } - return a; - } - if (aExp != 0) { - aSig |= 0x00800000; - } else if (aSig == 0) { - return a; - } else { - aExp++; - } - - if (n > 0x200) { - n = 0x200; - } else if (n < -0x200) { - n = -0x200; - } - - aExp += n - 1; - aSig <<= 7; - return normalizeRoundAndPackFloat32(aSign, aExp, aSig, status); -} - -float64 float64_scalbn(float64 a, int n, float_status *status) -{ - flag aSign; - int16_t aExp; - uint64_t aSig; - - a = float64_squash_input_denormal(a, status); - aSig = extractFloat64Frac( a ); - aExp = extractFloat64Exp( a ); - aSign = extractFloat64Sign( a ); - - if ( aExp == 0x7FF ) { - if ( aSig ) { - return propagateFloat64NaN(a, a, status); - } - return a; - } - if (aExp != 0) { - aSig |= LIT64( 0x0010000000000000 ); - } else if (aSig == 0) { - return a; - } else { - aExp++; - } - - if (n > 0x1000) { - n = 0x1000; - } else if (n < -0x1000) { - n = -0x1000; - } - - aExp += n - 1; - aSig <<= 10; - return normalizeRoundAndPackFloat64(aSign, aExp, aSig, status); -} - -floatx80 floatx80_scalbn(floatx80 a, int n, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig; - - aSig = extractFloatx80Frac( a ); - aExp = extractFloatx80Exp( a ); - aSign = extractFloatx80Sign( a ); - - if ( aExp == 0x7FFF ) { - if ( aSig<<1 ) { - return propagateFloatx80NaN(a, a, status); - } - return a; - } - - if (aExp == 0) { - if (aSig == 0) { - return a; - } - aExp++; - } - - if (n > 0x10000) { - n = 0x10000; - } else if (n < -0x10000) { - n = -0x10000; - } - - aExp += n; - return normalizeRoundAndPackFloatx80(status->floatx80_rounding_precision, - aSign, aExp, aSig, 0, status); -} - -float128 float128_scalbn(float128 a, int n, float_status *status) -{ - flag aSign; - int32_t aExp; - uint64_t aSig0, aSig1; - - aSig1 = extractFloat128Frac1( a ); - aSig0 = extractFloat128Frac0( a ); - aExp = extractFloat128Exp( a ); - aSign = extractFloat128Sign( a ); - if ( aExp == 0x7FFF ) { - if ( aSig0 | aSig1 ) { - return propagateFloat128NaN(a, a, status); - } - return a; - } - if (aExp != 0) { - aSig0 |= LIT64( 0x0001000000000000 ); - } else if (aSig0 == 0 && aSig1 == 0) { - return a; - } else { - aExp++; - } - - if (n > 0x10000) { - n = 0x10000; - } else if (n < -0x10000) { - n = -0x10000; - } - - aExp += n - 1; - return normalizeRoundAndPackFloat128( aSign, aExp, aSig0, aSig1 - , status); - -} |