summaryrefslogtreecommitdiffstats
path: root/qemu/dtc/Documentation/manual.txt
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/dtc/Documentation/manual.txt')
-rw-r--r--qemu/dtc/Documentation/manual.txt660
1 files changed, 660 insertions, 0 deletions
diff --git a/qemu/dtc/Documentation/manual.txt b/qemu/dtc/Documentation/manual.txt
new file mode 100644
index 000000000..65c8540be
--- /dev/null
+++ b/qemu/dtc/Documentation/manual.txt
@@ -0,0 +1,660 @@
+Device Tree Compiler Manual
+===========================
+
+I - "dtc", the device tree compiler
+ 1) Obtaining Sources
+ 1.1) Submitting Patches
+ 2) Description
+ 3) Command Line
+ 4) Source File
+ 4.1) Overview
+ 4.2) Properties
+ 4.3) Labels and References
+
+II - The DT block format
+ 1) Header
+ 2) Device tree generalities
+ 3) Device tree "structure" block
+ 4) Device tree "strings" block
+
+
+III - libfdt
+
+IV - Utility Tools
+ 1) convert-dtsv0 -- Conversion to Version 1
+ 1) fdtdump
+
+
+I - "dtc", the device tree compiler
+===================================
+
+1) Sources
+
+Source code for the Device Tree Compiler can be found at jdl.com.
+The gitweb interface is:
+
+ http://git.jdl.com/gitweb/
+
+The repository is here:
+
+ git://www.jdl.com/software/dtc.git
+ http://www.jdl.com/software/dtc.git
+
+Tarballs of the 1.0.0 and latest releases are here:
+
+ http://www.jdl.com/software/dtc-v1.2.0.tgz
+ http://www.jdl.com/software/dtc-latest.tgz
+
+1.1) Submitting Patches
+
+Patches should be sent to jdl@jdl.com, and CC'ed to
+devicetree-discuss@lists.ozlabs.org.
+
+2) Description
+
+The Device Tree Compiler, dtc, takes as input a device-tree in
+a given format and outputs a device-tree in another format.
+Typically, the input format is "dts", a human readable source
+format, and creates a "dtb", or binary format as output.
+
+The currently supported Input Formats are:
+
+ - "dtb": "blob" format. A flattened device-tree block with
+ header in one binary blob.
+
+ - "dts": "source" format. A text file containing a "source"
+ for a device-tree.
+
+ - "fs" format. A representation equivalent to the output of
+ /proc/device-tree where nodes are directories and
+ properties are files.
+
+The currently supported Output Formats are:
+
+ - "dtb": "blob" format
+
+ - "dts": "source" format
+
+ - "asm": assembly language file. A file that can be sourced
+ by gas to generate a device-tree "blob". That file can
+ then simply be added to your Makefile. Additionally, the
+ assembly file exports some symbols that can be used.
+
+
+3) Command Line
+
+The syntax of the dtc command line is:
+
+ dtc [options] [<input_filename>]
+
+Options:
+
+ <input_filename>
+ The name of the input source file. If no <input_filename>
+ or "-" is given, stdin is used.
+
+ -b <number>
+ Set the physical boot cpu.
+
+ -f
+ Force. Try to produce output even if the input tree has errors.
+
+ -h
+ Emit a brief usage and help message.
+
+ -I <input_format>
+ The source input format, as listed above.
+
+ -o <output_filename>
+ The name of the generated output file. Use "-" for stdout.
+
+ -O <output_format>
+ The generated output format, as listed above.
+
+ -d <dependency_filename>
+ Generate a dependency file during compilation.
+
+ -q
+ Quiet: -q suppress warnings, -qq errors, -qqq all
+
+ -R <number>
+ Make space for <number> reserve map entries
+ Relevant for dtb and asm output only.
+
+ -S <bytes>
+ Ensure the blob at least <bytes> long, adding additional
+ space if needed.
+
+ -v
+ Print DTC version and exit.
+
+ -V <output_version>
+ Generate output conforming to the given <output_version>.
+ By default the most recent version is generated.
+ Relevant for dtb and asm output only.
+
+
+The <output_version> defines what version of the "blob" format will be
+generated. Supported versions are 1, 2, 3, 16 and 17. The default is
+always the most recent version and is likely the highest number.
+
+Additionally, dtc performs various sanity checks on the tree.
+
+
+4) Device Tree Source file
+
+4.1) Overview
+
+Here is a very rough overview of the layout of a DTS source file:
+
+
+ sourcefile: list_of_memreserve devicetree
+
+ memreserve: label 'memreserve' ADDR ADDR ';'
+ | label 'memreserve' ADDR '-' ADDR ';'
+
+ devicetree: '/' nodedef
+
+ nodedef: '{' list_of_property list_of_subnode '}' ';'
+
+ property: label PROPNAME '=' propdata ';'
+
+ propdata: STRING
+ | '<' list_of_cells '>'
+ | '[' list_of_bytes ']'
+
+ subnode: label nodename nodedef
+
+That structure forms a hierarchical layout of nodes and properties
+rooted at an initial node as:
+
+ / {
+ }
+
+Both classic C style and C++ style comments are supported.
+
+Source files may be directly included using the syntax:
+
+ /include/ "filename"
+
+
+4.2) Properties
+
+Properties are named, possibly labeled, values. Each value
+is one of:
+
+ - A null-teminated C-like string,
+ - A numeric value fitting in 32 bits,
+ - A list of 32-bit values
+ - A byte sequence
+
+Here are some example property definitions:
+
+ - A property containing a 0 terminated string
+
+ property1 = "string_value";
+
+ - A property containing a numerical 32-bit hexadecimal value
+
+ property2 = <1234abcd>;
+
+ - A property containing 3 numerical 32-bit hexadecimal values
+
+ property3 = <12345678 12345678 deadbeef>;
+
+ - A property whose content is an arbitrary array of bytes
+
+ property4 = [0a 0b 0c 0d de ea ad be ef];
+
+
+Node may contain sub-nodes to obtain a hierarchical structure.
+For example:
+
+ - A child node named "childnode" whose unit name is
+ "childnode at address". It it turn has a string property
+ called "childprop".
+
+ childnode@addresss {
+ childprop = "hello\n";
+ };
+
+
+By default, all numeric values are hexadecimal. Alternate bases
+may be specified using a prefix "d#" for decimal, "b#" for binary,
+and "o#" for octal.
+
+Strings support common escape sequences from C: "\n", "\t", "\r",
+"\(octal value)", "\x(hex value)".
+
+
+4.3) Labels and References
+
+Labels may be applied to nodes or properties. Labels appear
+before a node name, and are referenced using an ampersand: &label.
+Absolute node path names are also allowed in node references.
+
+In this exmaple, a node is labled "mpic" and then referenced:
+
+ mpic: interrupt-controller@40000 {
+ ...
+ };
+
+ ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ ...
+ };
+
+And used in properties, lables may appear before or after any value:
+
+ randomnode {
+ prop: string = data: "mystring\n" data_end: ;
+ ...
+ };
+
+
+
+II - The DT block format
+========================
+
+This chapter defines the format of the flattened device-tree
+passed to the kernel. The actual content of the device tree
+are described in the kernel documentation in the file
+
+ linux-2.6/Documentation/powerpc/booting-without-of.txt
+
+You can find example of code manipulating that format within
+the kernel. For example, the file:
+
+ including arch/powerpc/kernel/prom_init.c
+
+will generate a flattened device-tree from the Open Firmware
+representation. Other utilities such as fs2dt, which is part of
+the kexec tools, will generate one from a filesystem representation.
+Some bootloaders such as U-Boot provide a bit more support by
+using the libfdt code.
+
+For booting the kernel, the device tree block has to be in main memory.
+It has to be accessible in both real mode and virtual mode with no
+mapping other than main memory. If you are writing a simple flash
+bootloader, it should copy the block to RAM before passing it to
+the kernel.
+
+
+1) Header
+---------
+
+The kernel is entered with r3 pointing to an area of memory that is
+roughly described in include/asm-powerpc/prom.h by the structure
+boot_param_header:
+
+ struct boot_param_header {
+ u32 magic; /* magic word OF_DT_HEADER */
+ u32 totalsize; /* total size of DT block */
+ u32 off_dt_struct; /* offset to structure */
+ u32 off_dt_strings; /* offset to strings */
+ u32 off_mem_rsvmap; /* offset to memory reserve map */
+ u32 version; /* format version */
+ u32 last_comp_version; /* last compatible version */
+
+ /* version 2 fields below */
+ u32 boot_cpuid_phys; /* Which physical CPU id we're
+ booting on */
+ /* version 3 fields below */
+ u32 size_dt_strings; /* size of the strings block */
+
+ /* version 17 fields below */
+ u32 size_dt_struct; /* size of the DT structure block */
+ };
+
+Along with the constants:
+
+ /* Definitions used by the flattened device tree */
+ #define OF_DT_HEADER 0xd00dfeed /* 4: version,
+ 4: total size */
+ #define OF_DT_BEGIN_NODE 0x1 /* Start node: full name
+ */
+ #define OF_DT_END_NODE 0x2 /* End node */
+ #define OF_DT_PROP 0x3 /* Property: name off,
+ size, content */
+ #define OF_DT_END 0x9
+
+All values in this header are in big endian format, the various
+fields in this header are defined more precisely below. All "offset"
+values are in bytes from the start of the header; that is from the
+value of r3.
+
+ - magic
+
+ This is a magic value that "marks" the beginning of the
+ device-tree block header. It contains the value 0xd00dfeed and is
+ defined by the constant OF_DT_HEADER
+
+ - totalsize
+
+ This is the total size of the DT block including the header. The
+ "DT" block should enclose all data structures defined in this
+ chapter (who are pointed to by offsets in this header). That is,
+ the device-tree structure, strings, and the memory reserve map.
+
+ - off_dt_struct
+
+ This is an offset from the beginning of the header to the start
+ of the "structure" part the device tree. (see 2) device tree)
+
+ - off_dt_strings
+
+ This is an offset from the beginning of the header to the start
+ of the "strings" part of the device-tree
+
+ - off_mem_rsvmap
+
+ This is an offset from the beginning of the header to the start
+ of the reserved memory map. This map is a list of pairs of 64-
+ bit integers. Each pair is a physical address and a size. The
+ list is terminated by an entry of size 0. This map provides the
+ kernel with a list of physical memory areas that are "reserved"
+ and thus not to be used for memory allocations, especially during
+ early initialization. The kernel needs to allocate memory during
+ boot for things like un-flattening the device-tree, allocating an
+ MMU hash table, etc... Those allocations must be done in such a
+ way to avoid overriding critical things like, on Open Firmware
+ capable machines, the RTAS instance, or on some pSeries, the TCE
+ tables used for the iommu. Typically, the reserve map should
+ contain _at least_ this DT block itself (header,total_size). If
+ you are passing an initrd to the kernel, you should reserve it as
+ well. You do not need to reserve the kernel image itself. The map
+ should be 64-bit aligned.
+
+ - version
+
+ This is the version of this structure. Version 1 stops
+ here. Version 2 adds an additional field boot_cpuid_phys.
+ Version 3 adds the size of the strings block, allowing the kernel
+ to reallocate it easily at boot and free up the unused flattened
+ structure after expansion. Version 16 introduces a new more
+ "compact" format for the tree itself that is however not backward
+ compatible. Version 17 adds an additional field, size_dt_struct,
+ allowing it to be reallocated or moved more easily (this is
+ particularly useful for bootloaders which need to make
+ adjustments to a device tree based on probed information). You
+ should always generate a structure of the highest version defined
+ at the time of your implementation. Currently that is version 17,
+ unless you explicitly aim at being backward compatible.
+
+ - last_comp_version
+
+ Last compatible version. This indicates down to what version of
+ the DT block you are backward compatible. For example, version 2
+ is backward compatible with version 1 (that is, a kernel build
+ for version 1 will be able to boot with a version 2 format). You
+ should put a 1 in this field if you generate a device tree of
+ version 1 to 3, or 16 if you generate a tree of version 16 or 17
+ using the new unit name format.
+
+ - boot_cpuid_phys
+
+ This field only exist on version 2 headers. It indicate which
+ physical CPU ID is calling the kernel entry point. This is used,
+ among others, by kexec. If you are on an SMP system, this value
+ should match the content of the "reg" property of the CPU node in
+ the device-tree corresponding to the CPU calling the kernel entry
+ point (see further chapters for more informations on the required
+ device-tree contents)
+
+ - size_dt_strings
+
+ This field only exists on version 3 and later headers. It
+ gives the size of the "strings" section of the device tree (which
+ starts at the offset given by off_dt_strings).
+
+ - size_dt_struct
+
+ This field only exists on version 17 and later headers. It gives
+ the size of the "structure" section of the device tree (which
+ starts at the offset given by off_dt_struct).
+
+So the typical layout of a DT block (though the various parts don't
+need to be in that order) looks like this (addresses go from top to
+bottom):
+
+ ------------------------------
+ r3 -> | struct boot_param_header |
+ ------------------------------
+ | (alignment gap) (*) |
+ ------------------------------
+ | memory reserve map |
+ ------------------------------
+ | (alignment gap) |
+ ------------------------------
+ | |
+ | device-tree structure |
+ | |
+ ------------------------------
+ | (alignment gap) |
+ ------------------------------
+ | |
+ | device-tree strings |
+ | |
+ -----> ------------------------------
+ |
+ |
+ --- (r3 + totalsize)
+
+ (*) The alignment gaps are not necessarily present; their presence
+ and size are dependent on the various alignment requirements of
+ the individual data blocks.
+
+
+2) Device tree generalities
+---------------------------
+
+This device-tree itself is separated in two different blocks, a
+structure block and a strings block. Both need to be aligned to a 4
+byte boundary.
+
+First, let's quickly describe the device-tree concept before detailing
+the storage format. This chapter does _not_ describe the detail of the
+required types of nodes & properties for the kernel, this is done
+later in chapter III.
+
+The device-tree layout is strongly inherited from the definition of
+the Open Firmware IEEE 1275 device-tree. It's basically a tree of
+nodes, each node having two or more named properties. A property can
+have a value or not.
+
+It is a tree, so each node has one and only one parent except for the
+root node who has no parent.
+
+A node has 2 names. The actual node name is generally contained in a
+property of type "name" in the node property list whose value is a
+zero terminated string and is mandatory for version 1 to 3 of the
+format definition (as it is in Open Firmware). Version 16 makes it
+optional as it can generate it from the unit name defined below.
+
+There is also a "unit name" that is used to differentiate nodes with
+the same name at the same level, it is usually made of the node
+names, the "@" sign, and a "unit address", which definition is
+specific to the bus type the node sits on.
+
+The unit name doesn't exist as a property per-se but is included in
+the device-tree structure. It is typically used to represent "path" in
+the device-tree. More details about the actual format of these will be
+below.
+
+The kernel powerpc generic code does not make any formal use of the
+unit address (though some board support code may do) so the only real
+requirement here for the unit address is to ensure uniqueness of
+the node unit name at a given level of the tree. Nodes with no notion
+of address and no possible sibling of the same name (like /memory or
+/cpus) may omit the unit address in the context of this specification,
+or use the "@0" default unit address. The unit name is used to define
+a node "full path", which is the concatenation of all parent node
+unit names separated with "/".
+
+The root node doesn't have a defined name, and isn't required to have
+a name property either if you are using version 3 or earlier of the
+format. It also has no unit address (no @ symbol followed by a unit
+address). The root node unit name is thus an empty string. The full
+path to the root node is "/".
+
+Every node which actually represents an actual device (that is, a node
+which isn't only a virtual "container" for more nodes, like "/cpus"
+is) is also required to have a "device_type" property indicating the
+type of node .
+
+Finally, every node that can be referenced from a property in another
+node is required to have a "linux,phandle" property. Real open
+firmware implementations provide a unique "phandle" value for every
+node that the "prom_init()" trampoline code turns into
+"linux,phandle" properties. However, this is made optional if the
+flattened device tree is used directly. An example of a node
+referencing another node via "phandle" is when laying out the
+interrupt tree which will be described in a further version of this
+document.
+
+This "linux, phandle" property is a 32-bit value that uniquely
+identifies a node. You are free to use whatever values or system of
+values, internal pointers, or whatever to generate these, the only
+requirement is that every node for which you provide that property has
+a unique value for it.
+
+Here is an example of a simple device-tree. In this example, an "o"
+designates a node followed by the node unit name. Properties are
+presented with their name followed by their content. "content"
+represents an ASCII string (zero terminated) value, while <content>
+represents a 32-bit hexadecimal value. The various nodes in this
+example will be discussed in a later chapter. At this point, it is
+only meant to give you a idea of what a device-tree looks like. I have
+purposefully kept the "name" and "linux,phandle" properties which
+aren't necessary in order to give you a better idea of what the tree
+looks like in practice.
+
+ / o device-tree
+ |- name = "device-tree"
+ |- model = "MyBoardName"
+ |- compatible = "MyBoardFamilyName"
+ |- #address-cells = <2>
+ |- #size-cells = <2>
+ |- linux,phandle = <0>
+ |
+ o cpus
+ | | - name = "cpus"
+ | | - linux,phandle = <1>
+ | | - #address-cells = <1>
+ | | - #size-cells = <0>
+ | |
+ | o PowerPC,970@0
+ | |- name = "PowerPC,970"
+ | |- device_type = "cpu"
+ | |- reg = <0>
+ | |- clock-frequency = <5f5e1000>
+ | |- 64-bit
+ | |- linux,phandle = <2>
+ |
+ o memory@0
+ | |- name = "memory"
+ | |- device_type = "memory"
+ | |- reg = <00000000 00000000 00000000 20000000>
+ | |- linux,phandle = <3>
+ |
+ o chosen
+ |- name = "chosen"
+ |- bootargs = "root=/dev/sda2"
+ |- linux,phandle = <4>
+
+This tree is almost a minimal tree. It pretty much contains the
+minimal set of required nodes and properties to boot a linux kernel;
+that is, some basic model informations at the root, the CPUs, and the
+physical memory layout. It also includes misc information passed
+through /chosen, like in this example, the platform type (mandatory)
+and the kernel command line arguments (optional).
+
+The /cpus/PowerPC,970@0/64-bit property is an example of a
+property without a value. All other properties have a value. The
+significance of the #address-cells and #size-cells properties will be
+explained in chapter IV which defines precisely the required nodes and
+properties and their content.
+
+
+3) Device tree "structure" block
+
+The structure of the device tree is a linearized tree structure. The
+"OF_DT_BEGIN_NODE" token starts a new node, and the "OF_DT_END_NODE"
+ends that node definition. Child nodes are simply defined before
+"OF_DT_END_NODE" (that is nodes within the node). A 'token' is a 32
+bit value. The tree has to be "finished" with a OF_DT_END token
+
+Here's the basic structure of a single node:
+
+ * token OF_DT_BEGIN_NODE (that is 0x00000001)
+ * for version 1 to 3, this is the node full path as a zero
+ terminated string, starting with "/". For version 16 and later,
+ this is the node unit name only (or an empty string for the
+ root node)
+ * [align gap to next 4 bytes boundary]
+ * for each property:
+ * token OF_DT_PROP (that is 0x00000003)
+ * 32-bit value of property value size in bytes (or 0 if no
+ value)
+ * 32-bit value of offset in string block of property name
+ * property value data if any
+ * [align gap to next 4 bytes boundary]
+ * [child nodes if any]
+ * token OF_DT_END_NODE (that is 0x00000002)
+
+So the node content can be summarized as a start token, a full path,
+a list of properties, a list of child nodes, and an end token. Every
+child node is a full node structure itself as defined above.
+
+NOTE: The above definition requires that all property definitions for
+a particular node MUST precede any subnode definitions for that node.
+Although the structure would not be ambiguous if properties and
+subnodes were intermingled, the kernel parser requires that the
+properties come first (up until at least 2.6.22). Any tools
+manipulating a flattened tree must take care to preserve this
+constraint.
+
+4) Device tree "strings" block
+
+In order to save space, property names, which are generally redundant,
+are stored separately in the "strings" block. This block is simply the
+whole bunch of zero terminated strings for all property names
+concatenated together. The device-tree property definitions in the
+structure block will contain offset values from the beginning of the
+strings block.
+
+
+III - libfdt
+============
+
+This library should be merged into dtc proper.
+This library should likely be worked into U-Boot and the kernel.
+
+
+IV - Utility Tools
+==================
+
+1) convert-dtsv0 -- Conversion to Version 1
+
+convert-dtsv0 is a small utility program which converts (DTS)
+Device Tree Source from the obsolete version 0 to version 1.
+
+Version 1 DTS files are marked by line "/dts-v1/;" at the top of the file.
+
+The syntax of the convert-dtsv0 command line is:
+
+ convert-dtsv0 [<input_filename ... >]
+
+Each file passed will be converted to the new /dts-v1/ version by creating
+a new file with a "v1" appended the filename.
+
+Comments, empty lines, etc. are preserved.
+
+
+2) fdtdump -- Flat Device Tree dumping utility
+
+The fdtdump program prints a readable version of a flat device tree file.
+
+The syntax of the fdtdump command line is:
+
+ fdtdump <DTB-file-name>